Professional Documents
Culture Documents
Issue 2
Cabling
Building Management Cables Instrumentation Cables Article: Preventing Costly Damage to Networks Beldens new Modular Industrial Patch Panel End to End Cabling Solutions 04 05 06 07 08
Networking
Intelligent Transport Systems Moxa 24 Port Managed Ethernet Switch 10 11
Wireless
Article: Wireless Point to Point New Release: Alvarion BreezeULTRA 12 13
Audio Visual
SDI Over Fibre Transport System Boundary Layer Through Table Microphones 1080p HDMI Extender 2:1 Wireless Microphone Radio System 14 14 15 15
www.madisontech.com.au
Become an Authorised Madison Wireless Partner Call 1800 122 223 to enquire.
02
Insider intelligence > MaxBlox Solderless HD15 & DB9 Termination System.
The MaxBlox Solderless HD15 and DB9 EZ termination system features a patented design that is better, faster and stronger than anything else on the market. Manufactured with genuine Phoenix Contact terminal blocks for a truly reliable connection, these larger blocks make it easier to terminate while still keeping the connector compact. MaxBlox dramatically reduces installation time and cost by eliminating the need for soldering or crimping and the unique sledtype bottom allows these connectors to slide, snap, and lock into the patented MaxBlox CD-MX915H hood for a secure cable mount connection. When used in panel mount applications these low profile connectors take up less than 25.4 mm behind a plate.
CD-MX15F CD-MX15M with Clamshell Hood
For more information on the BTX range of MaxBlox connectors call 1800 00 77 80.
03
>
Intelligent info
NEW STOCK
Low Smoke Zero Halogen (LSZH or LSOH) cables utilise cable jacketing that reduces the amount of toxic or corrosive gases emitted during combustion. In the event of a fire, this type of sheath will emit very low levels of smoke, and non-toxic levels of poisonous halogen gases. These cables were traditionally specified for use in poorly ventilated areas such as ship building or tunnels, but are becoming more commonly used in the construction of commercial buildings.
Madison Technologies now has a large range of Garland cables for use within the Building Management industry which services the Heating, Ventilation and Air Conditioning (HVAC) areas. These cables simplify the control of building facility management and complement the Garland range of security, access control , CCTV, and telephone cables, providing a complete building management system for HVAC and security controls.
R&M, Cat5e, U/UTP cable. 100 Ohm impedance. 24AWG with data transmission frequencies of up to 200 MHz, Low Smoke Zero Halogen, Light Grey Sheath. Available in 305m Boxes.
Part No: R35292
R&M, Cat6, U/UTP cable. 100 Ohm impedance. 24AWG with data transmission frequencies of up to 450 MHz, Low Smoke Zero Halogen, Light Grey Sheath. Available in 500m Reels.
Part No: R35057
04
>
Intelligent info
Belden has just released a new iPad App which enables you to get detailed product information on new Belden products. Download the App at the Apple App Store.
Instrumentation Cables
Part Number MCP7031S MCP7032S MCP7034S MCP7041S MCP7042S No. of Pair 1 2 4 1 2 Description 7/0.30mm Conductor (0.5mm2), 1 Pair, Overall Screen with PVC V90HT Black Sheath 7/0.30mm Conductor (0.5mm2), 2 Pair, Overall Screen with PVC V90HT Black Sheath 7/0.30mm Conductor (0.5mm2), 4 Pair, Overall Screen with PVC V90HT Black Sheath 7/0.40mm Conductor (1mm2), 1 Pair, Overall Screen with PVC V90HT Black Sheath 7/0.40mm Conductor (1mm2), 2 Pair, Overall Screen with PVC V90HT Black Sheath Available Sizes 100m 500m 1000m Cut
05
> Solution
Rodent Resistant Cables In rodent resistant cables, the optical fibres are contained in an axial jelly filled loose tube under an inner polyethylene sheath. Single or mono tube cables are further strengthened with flexible non-metallic armouring bonded to the inner polyethylene sheath. A termite resistant nylon jacket then goes over this inner polyethylene sheath. The rodent resistant glass composite armour is then applied and a further polyethylene outer sheath is applied over the non-metallic armour. The glass composite armour also significantly increases the tensile strength and general robustness of the cable which also reduces damage in what can often be very difficult installations. It is best to apply the nylon under the armour not as a jacket, to protect the nylon (which is there to protect the cable from termites) from rat bites, because once the nylon is damaged it will enable termites to enter the cable and possibly damage the fibres. In the past, CST or corrugated steel tape was used as common protection against rodents, however this has several downsides: It makes it difficult for installation contractors to terminate the cable, resulting in higher installation costs. Metal armoured cables must be separated from power cables. In many instances CSTA needs to be earthed with other equipment. This can create further issues through earth potential differences in the form of corrosion at the joints and between different metals this is another potential failure point. CSTA is not as flexible and bend radii may therefore be an issue. CSTA presents an increased lightning hazard. The typical length of CSTA cables is shorter which results in more joins and higher installation costs. Termite Resistant Cables If it is determined that rodents are not a risk and only protection against termites is required, then ensuring the cable has a quality Nylon jacket will be sufficient. However, if the cable is being installed in ducts or conduits where it will be dragged in, then it is highly recommended to request a sacrificial sheath to protect the nylon during installation.
(rats & mice) and termites. Detailed below are the two typical network locations where rodents and/or termites can cause faults, and the appropriate cables recommended for reducing the risk of network failures and costly repairs. Direct Buried Cables In these installations the majority of network failures after cables have been commissioned are caused by rodents and termites. As a result of the continuous attacks on optical cable, manufacturers and network designers have determined that the most effective way of preventing network failures due to rodents and termites is to ensure the fibre cable has armouring and a nylon jacket. Burying cables deeper does reduce the risk of rats and mice however the risk is not completely removed. If cables are buried but have been installed in pvc conduits, whilst the conduit will offer limited protection, it is still susceptible to attack, and it is recommended to take appropriate precautions.
06
> Continued Optical Fibre Closures With over 300 species of termites within Australia and with the volume of fibre cable being laid for the National Broadband Network, termite resistance for Fibre Enclosures and accessories should also be considered. Insects can destroy the outer polyethylene sheath of a standard closure and then continue their attack on the fibre connections. 3M fibre closures recently underwent independent testing in Australia for termite resistance. The fibre closure ranges assessed include the 3M BPEO, 3M 2178 and the 3M FDC-HS families. The tested enclosures showed no damage at the conclusion of the testing. 3M closures are robust and provide protection from outside elements and help to maintain integrity of the fibre connections housed within.
3M BPEO range is designed for all types of networks from 12 to 432 optical fibres.
Beldens New Modular Industrial Patch Panel brings flexibility and versatility to cable termination.
The MIPP is a completely new solution that provides the ideal connection between copper cables and active industrial networking equipment. Available in a choice of modules suitable for both fibre and copper cables, up to 6 modules can be connected together to create a single panel that can accommodate both types of cable at the same time for maximum system flexibility. Using patchcords to connect to active equipment, cables can be terminated outside the cabinet in an organised and structured manner to ensure the highest level of reliability. Applications The MIPP is ideal for use in a wide range of industrial applications requiring maximum system reliability and flexibility. The industrial design makes it highly suited for use in Machine Building, Transportation, Alternative Power Generation, Power Transportation & Distribution, and Oil & Gas markets, as well as more general use in enterprise, buildings and other applications. Benefits Thanks to its modular design, installation is quick and easy, saving time and significantly reducing initial set-up costs, whilst at the same time contributing to greater reliability and easier and more efficient system management, requiring less maintenance. The MIPP has a lightweight aluminium structure which increases its overall versatility. It can easily be mounted on a DIN Rail, or it can even be fixed at the sides of the cabinets simply using a wall mount plate. The small housing, high port density and modularity, mean cabinet space is kept to a minimum. Features Accommodating various media and connectors including; LC, SC fibre duplex adapters and RJ45 copper keystone jacks (Shielded and Unshielded, Cat 5e, Cat 6, Cat 6A). High port density for maximum use of available space. Easy to use, allows space for handling cable and module is removable from unit to facilitate connection/splicing Splice tray and multiple fingers for easy fibre management. Cable entry in two places (top or bottom) for ease of use and choice of placement in cabinet. Resilient for protection against the harsher industrial environments. Wide temperature range from -20C to +70C.
Belden introduces the MIPP, a modular industrial patch panel which makes it possible to terminate fibre and copper in one solution.
07
Flexible range of wall suited to smaller inst range of accessories swing frames. Cable Management 4 & 5 ring cable managers, ideally suited for Category applications where it is important to maintain an optimum bend radius between two end points.
Patch Cords A complete range of copper and fibre patch cords are available and can be customised and assembled for specific projects.
For more information on our range of Cabling Solutions, contact Madison on 1800 66 99 99.
> Reference Sites End User
QLD Health Centrelink Harvey Norman UBS Bank Brisbane Supreme Court Tony Ireland Holden Hamer Hall - ACM Melbourne Convention Centre
Fibre Enclosures Wall, rack or DIN mount enclosures provide an economical solution for installations where direct termination, pigtail splicing or patching is required.
System
Cat 6 Cat 5e / Cat 6 Cat 6 Cat 6 Cat 6a Cat 6a Cat 6a (with new ISO Jack) Cat 6
Network Security
Add another layer of security to your data network with plug-in & p copper and fibre connect
08
l mount cabinets, specially tallations or patch panels. Full s available including wall mount
Optical Fibre Cables Loose tube or tight buffer constructions for indoor or outdoor applications. Connectors & Adaptors Full range of copper and fibre connectors and adaptors.
Telephone Patch Panels Specifically designed for use with NEC Univerge PABX Systems.
Copper Cables Cat5e, Cat6, Cat6a, Coax, Instrumentation, Security, or speciality cables.
Patch Panel Available in Cat5e, Cat6 or Cat6a. Patch panels are essential for connecting a range of devices and systems to the central network. 19 Racks & Frames Fully customisable with additional features that offer more protection, security and easy management of the network.
09
Pre-Configuration and Network Simulation of Roadside Communications Cabinets helps cure on site headaches.
ITS (Intelligent Transportation Systems) technology plays a major role in modern transportation construction by enhancing the reliability and safety of highway and city transportation infrastructure. Troubleshooting network issues after deployment of ITS infrastructure causes project managers and contractors many headaches. Origin Alliance and CV Services went against the grain and performed a full simulation of the network for the Dinmore to Goodna ITS upgrade in a purpose built facility prior to deployment, thereby eliminating costly and time consuming troubleshooting in the field. Origin Alliance hired project management firm, CV Services to manage and install the infrastructure, including the pre-configuration and network simulation, ensuring the project was completed to deadline and within budget parameters. CV Services enlisted Madison Technologies to source, supply and configure a rugged Ethernet solution that would have the capacity to run the ITS communications systems. Technical Solution There were 35 roadside communications boxes to be deployed along the length of the 8km section of road. This system would include variable speed signs, warning signs, traffic signs and CCTV cameras along the 8km stretch. Origin Alliance specified that all 35 boxes were to be preconfigured and tested prior to deployment in a purpose built facility. This Intelligent Transport System would be connected to the control centre via a reliable and redundant high-bandwidth Ethernet network transferring large volumes of traffic data and video, to allow for real-time continuous monitoring and response. CV Services needed a reliable industrial Ethernet solution that had the capacity to run all of the communications. The industrial Ethernet solution also needed to be compact and support redundant power to ensure uninterrupted system performance and withstand the extreme temperature conditions of outdoor environments. Solution Madison recommended the Moxa PT-7728 and PT-7828 Gigabit modular rack mount switches as the most practical industrial Ethernet backbone solution for the project. The Moxa switches, each with -40 to 75C wide temperature range, were suitable to run all of the IT and Communications for the ITS. Tomas Blaha, Madisons Moxa MTSC Certified Engineer, provided two full days of factory acceptance testing and troubleshooting on site during the preconfiguration stage to ensure the optimum use of the solution, prior to deployment in the field. The PT-7728s Gigabit redundant ring backbone, and 24/48 VDC or 110/220 VDC/VAC dual isolated redundant power supplies increase the reliability of communications and save on cabling/wiring costs. The Layer 3 routing functionality of the Moxa PT-7828 provides the ability to divide the large network into hierarchical subnets and allow data and information to communicate across networks.
The Project Origin Alliance is responsible for the federally funded $1.95 billion dollar 8 kilometre motorway upgrade between Dinmore and Goodna. The upgrade will include a minimum of 6 lanes, a network of new service roads and the latest technology to help manage capacity and promote safety. The project commenced in mid-2009. The objective of the project was to upgrade the motorway and modernise it by using the latest technology so that Queensland Department of Transport and Main Roads could actively manage the motorways, capacity and promote safety via an Intelligent Transport System. This is a key infrastructure initiative expected to provide a safer, more reliable and sustainable transport solution for the western suburbs of Brisbane and South East Queenslands wider transport network. (Origin Alliance)
10
The configuration of the cyber security features of these 19 rack mount units mean that the communications would be secure from unauthorised configuration and provide localised access security. Each of the 35 roadside communications boxes contain a Moxa Switch, which is linked to the control centre via the Ethernet backbone. All Moxa switches come with a solid, 5-year warranty, and are designed to provide reliable, long-term operation in industrial applications. Madison worked with CV Services to vet the network design and used a Fluke Metroscope, provided by Madison, to perform RFC2544 automated tests at full line rate with recommend frame sizes to ensure full support for throughput, latencies, losses and back to back modes. This guaranteed the network topology for deployment out in the field and its ability to support the variety of services required in the ITS specifications. Benefits Preconfiguring and troubleshooting the ITS meant that Origin Alliance could expect a fully operational system in the field from the moment of deployment. CV Services chose Madison because of our in depth product knowledge and technical support capabilities. The provision of a Moxa MTSC Certified Engineer for two days assisted CV services in completing the project both on time and on budget. By assisting with the pre-commissioning and optimisation of the network prior to deployment, Madison and CV Services were able to ensure that the network would work reliably, effectively and efficiently out in the field.
Pretesting of field cabinets containing the Moxa PT-7728 rackmount.
For more information on our range of Industrial Networking Solutions, contact a Madison Networking specialist on 1800 72 79 79.
11
Wireless link can be depicted in several different ways. Usable throughput is the amount of data available from end to end over the link after taking into account management overheads and other handshaking requirements which use a small portion of the throughput. The table below details the usable throughputs of the Alvarion BreezeNet family of Point to Point wireless solutions recommended by Madison. As you can see in the table, the Alvarion BreezeULTRA offers a much higher throughput, which is ideal for surveillance, mining, oil and gas, education, utilities and transport applications. The BreezeULTRA ensures future availability of network by having a high usable throughput from its MIMO technology. MIMO is smart antenna technology that offers increased data throughput and range without the need for more bandwidth or transmit power. If you are technically inclined, you may be familiar with the following particulars for the ULTRA such as MIMO (2x2), OFDM, TDD or OFDM, BPSK, QAM 16 & 64. WPA2 AES 128 bit Security or DSCP, fast packet processing, MIR per direction (UL/DL), concatenation, burst mode, small packet optimisation to support voice, QoS, Ethernet type, TCP/UDP port and VLAN-ID. This is the type of technology speak that sends most of us running to our nearest technically savvy person. In the case of the Alvarion range of wireless solutions, Glenn Zerafa, Madisons Wireless expert, is available to assist you in determining the most efficient and effective wireless solution for whatever your application. Contact our Wireless Experts on 1800 12 22 23 to talk with someone who speaks your language.
MIMO Technology
Double capacity with MIMO B (Spatial Multiplexing) Double range and link resilience with unique Spatial Diversity
NLOS Technology
OFDM for NLOS
Interference Mitigation
Fading multipath avoidance techniques DFS Coverage
12
BreezeULTRA optimises the performance for applications such as data, voice, or video using quality of service (QoS) to guarantee high-quality voice and to support time-critical applications in parallel for broadband applications such as high-definition video streaming. Technical Features Capacity: Transmit voice, video and data at 250 Mbps net per radio Distance: High power RF TX +24dBm with 23dB integrated antennas provides a range in excess of 40km Difficult Paths: World leading non-line-of-sight (NLOS) coverage and interference mitigation with OFDM, MIMO and diversity technologies. Ultra-fast on board packet processing at 80,000 PPS Optimized performance for voice, video and data using QoS High power PoE output for powering IP cameras Capacity upgradable over-the-air via software keys Latest generation IP radio platform for the future
Business Benefits
Provide secure, all-weather communications Better manage resources and reduce downtime Reduce costly satellite communication fees Improve safety and security Stay apprised of changing conditions Better manage resources and reduce downtime Eliminate costly leased E1/T1 lines Improve security and detect leaks faster Better operation of substations Empower consumers and increase satisfaction Increase productivity of mobile workers Reduce fuel consumption Keep commuters connected and satisfied Streamline sales and business processes Eliminate costly leased E1/T1 lines Increase intra-office communication Reduce OPEX with VoIP Eliminate costly leased E1/T1 lines
Mining
Smart Utilities
Transportation
To become an Authorised Madison Wireless Partner or to receive further information on the Alvarion BreezeULTRA, contact a Madison Wireless specialist on 1800 12 22 23 .
13
SDI Over Fibre Transport System Short and medium distance digital video distribution.
Model 400 The Model 400 SDI-Over-Fibre Transport System is a high performance, cost effective, rack mount solution for distributing digital video signals over short and medium distances. The system is compatible with all common broadcast serial digital video formats and is suitable for remote trucks, live-event video distribution, and fixed links between production centres and remote sites. Eight Model 400 versions are available, providing a range of input and output configurations. Technical Features: Multi-channel electrical-to-optical (E2O) and optical-toelectrical (O2E) SDI transport 12 format-independent SDI data paths over four singlemode optical fibres (6 SDI over 2 fibre) Supports 3G (SMPTE 424M), HD (SMPTE 292), and SD (SMPTE 259M) SDI, as well as DVB-ASI Fibre transport based on SMPTE 297 standard Dual power capability: AC mains or DC; when both sources are present system is AC mains powered and DC supply acts as a backup Ethernet port provides system configuration and performance monitoring using web pages or SNMP Front-panel features include status display, navigation buttons, power switch, and LED indicators 1U enclosure weighs less than 3 kg For more information on the Studio Technologies Fibre Transport System, contact a Madison Broadast & Audio Visual specialist on 1800 00 77 80.
Studio Technologies Model 400 & 410 SDI Over Fibre Transport System.
Description
Retractable, through-table Omni-Directional Condenser microphone with remote on/off switch facility. Finished in Black Nextel or Satin Nickel. Retractable, through-table Cardioid Condenser microphone with remote on/off switch facility. Finished in Black Nextel or Satin Nickel.
CRM 102-RF
14
1080p HDMI Extender 2:1 Long distance HD video over category cable.
Aavara 2:1 HDMI CAT5 Extender PE221 is a HDMI switch hub that supports 1080i/p HD video long distance transmission over category cable, and output to HDMI HDTV digital display/projector/amplifier from two HDMI video sources such as a PS3, Xbox 360 or BluRay player. It is a flexible solution which can integrate up to a 70 metre solution when installing for retail/exhibition/digital signage projects and applications. Product Features HDMI specification 1.3b compliant Equalise the signals to optimise the long distance transmission Optimal for HDMI signal transmitted up to 70m for 1080i & 45m for 1080p by STP CAT-5e cables Support DDWG standards for HDMI compliant monitors Supports 576i, 576p, 720p, 1080i and 1080p resolution CEC (Consumer Electronic Control) pass-thru support for HDMI home theater integration DVI specification 1.0 compliant HDCP Rev1.2 specification compliant Plug-and-play. Installs in seconds Product Specification HDCP Spec: 1.3b & 1.2 compliant DVI Spec: 1.0 compliant CEC: Allows 1 TV remote to sync interoperability between display/projector and HDMI AV devices Operating temp: +5C to +35C Storage temp: -20C to +60C Humidity range: 5% to 90% RH Power consumption: 3W Single link range: 480i,480p,720p,1080i,1080p HDMI signal transmission: 70m for 1080i & 45m for 1080p by STP Cat5e cables Dimension: 83mmW x 71mmD x 27mmH
15
Cabling 1800 66 99 99 Networking 1800 72 79 79 Wireless 1800 12 22 23 Audio Visual 1800 00 77 80 Test & Measurement 1800 98 88 87
Please Note: Madison provides a world of cables and connective technologies to professionals who value performance quality first. Trademarks and trade names are those of their respective owners. Pictures are for illustration purposes only. Prices and specifications are subject to change without notice E&OE.
www.madisontech.com.au