Professional Documents
Culture Documents
24
Section Three
(continued)
Overcurrent Protection
3.25
3.6.9
(Continued )
3.6.10 NEC Section 240.13, Ground-Fault Protection of Equipment on Buildings or Remote Structures 3.6.10
3.6.11 NEC Section 240.21, Location Requirements for Overcurrent Devices and Tap Conductors 3.6.11
(continued)
3.26
Section Three
3.6.11
(Continued )
(continued)
Overcurrent Protection
3.27
3.6.11
(Continued )
3.28
Section Three
3.6.13 NEC Section 240.50, Plug Fuses, Fuseholders, and Adapters 3.6.13
Overcurrent Protection
3.29
3.6.16 NEC Section 240.54, Type S Fuses, Adapters, and Fuseholders 3.6.16
3.30
Section Three
Overcurrent Protection
3.31
3.6.21 NEC Section 240.92(B), Transformer Secondary Conductors of Separately Derived Systems (Supervised Industrial Installations Only) 3.6.21
3.6.22 NEC Section 240.92(B)(1), Short-Circuit and Ground-Fault Protection (Supervised Industrial Installations Only) 3.6.22
3.6.23 NEC Section 240.92(B)(2), Overload Protection (Supervised Industrial Installations Only) 3.6.23
3.6.24 NEC Section 240.92(C), Outside Feeder Taps (Supervised Industrial Installations Only) 3.6.24
3.32
Section Three
3.6.25 NEC Section 240.100, Feeder and BranchCircuit Protection over 600 V Nominal 3.6.25
3.7.2 NEC Section 250.90, Bonding Requirements and Short-Circuit Current Rating 3.7.2
3.7.3 NEC Section 250.96(A), Bonding Other Enclosures and Short-Circuit Current Requirements 3.7.3
Overcurrent Protection
3.33
3.34
Section Three
Overcurrent Protection
3.35
3.11.1
3.11.2 NEC Section 430.6, Ampacity of Conductors for Motor Branch Circuits and Feeders 3.11.2
3.11.3
3.36
Section Three
3.11.5 NEC Section 430.36, Fuses Used to Provide Overload and Single-Phasing Protection 3.11.5
Overcurrent Protection
3.37
3.11.6 NEC Section 430.52, Sizing of Various Overcurrent Devices for Motor Branch-Circuit Protection 3.11.6
3.38
Section Three
3.11.7 NEC Section 430.53, Connecting Several Motors or Loads on One Branch Circuit 3.11.7
Overcurrent Protection
3.39
(continued)
3.40
Section Three
3.11.10
(Continued )
Overcurrent Protection
3.41
3.42
Section Three
3.11.13 NEC Section 430.109(A)(6), Manual Motor Controller as a Motor Disconnect 3.11.13
Overcurrent Protection
3.43
3.12.2 NEC Section 440.22, Application and Selection of the Branch-Circuit Protection for HVAC Equipment 3.12.2
(continued)
3.44
Section Three
3.13.1
(Continued )
Overcurrent Protection
3.45
3.13.2 NEC Section 450.3(A), Protection Requirements for Transformers over 600 V 3.13.2
3.13.3 NEC Section 450.3(B), Protection Requirements for Transformers 600 V or Less 3.13.3
3.46
Section Three
3.14.1 NEC Section 455.7, Overcurrent Protection Requirements for Phase Converters 3.14.1
3.16.1 NEC Section 501.6(B), Fuses for Class 1, Division 2 Locations 3.16.1
Overcurrent Protection
3.47
3.17.1 NEC Section 517.17, Requirements for Ground-Fault Protection and Coordination in Health Care Facilities 3.17.1
3.48
Section Three
3.19.1 NEC Section 550.6(B), Overcurrent Protection Requirements for Mobile Homes and Parks 3.19.1
3.20.1 NEC Section 610.14(C), Conductor Sizes and Protection for Cranes and Hoists 3.20.1
3.21.1 NEC Section 620.62, Selective Coordination of Overcurrent Protective Devices for Elevators 3.21.1
(continued)
Overcurrent Protection
3.49
3.21.1
(Continued )
3.50
Section Three
3.23.1 NEC Section 700.5, Emergency Systems: Their Capacity and Rating 3.23.1
Overcurrent Protection
3.51
3.23.3 NEC Section 700.25, Emergency System Overcurrent Protection Requirements (FPN) 3.23.3
3.24.1 NEC Section 705.16, Interconnected Electric Power Production Sources: Interrupting and Short-Circuit Current Rating 3.24.1
3.52
Section Three
3.25.1 NEC Section 725.23, Overcurrent Protection for Class 1 Circuits 3.25.1
3.26.1 NEC Section 760.23, Requirements for Non-Power-Limited Fire Alarm Signaling Circuits 3.26.1