Professional Documents
Culture Documents
for the
General
This manual uses the following conventions: Text / symbol Italics Purpose Menus, commands, dialog field titles, folders and file names, pushbuttons Important information about the program
Change history: July 2005 Version created March 2006 Using JM commands in the window with copy and paste.
Program Description
2. Program Description
General note:
The debug monitor should only be connected to the processor card locally. Initializing the debug monitor via the CS7 can cause communication errors.
2.1.
Once you have started the program, the following dialog is displayed:
Program Description Setting the Serial Interface To set the serial interface, choose Option / Setting Com Port. 2.2.
Select the interface Set the baud rate (normally 9600) EVEN: For initializing the monitor NONE: For the hex / debug monitor
2.3.
If the processor is already in debug mode, simply press "RETURN". The interface is opened automatically and communication begins, provided that the serial interface has been set properly.
Program Description
If the processor is not yet in debug mode, you can switch the selected processor to debug mode by choosing Options / Init Debug Monitor /
To initialize the debug monitor via the CS7, select the required processor. In practice, the debug monitor is normally initialized locally with processor 1. This is also the case with processors 2 to 8.
During initialization, the serial interface is automatically switched between EVEN (initialization) and NONE (monitoring). Once initialization has been successfully completed, communication with the processor is possible.
To copy it to the clipboard, choose either CTRL+C or Edit / Copy. The cursor then returns to the input position.
To paste the value from the clipboard into the window, choose either CTRL+V or Edit / Paste.
Program Description
2.5.
You can use the save function to save the content of the debug window in a text file with an ASCII character set. The file extension is *.dmx. Whenever you exit the program, the last session is saved under the file name "lastdebug.dmx".
2.6.
To load a debug file that you have saved, choose File / Open.
Since the debug file is saved as an ASCII file, it can be edited using a different editor.
2.8.
To save any settings you have changed (e.g. the COM interface) to the INI file, choose File / Save.
Under "Save as type" in the "Save As" dialog, choose the file extension *.ini.
Program Description
The settings from here on are for the debug monitor. Serial interface settings.
Program Description
The first item of information in square parentheses is the selection [MONITOR_JM]. This is followed by the various key specifications. TXT_1= ADR_1= Neither of these specifications (selection and key) must be changed.
The key ID must be entered with an equals sign and the configuration must not contain a space.
10