Professional Documents
Culture Documents
500 GHz
VHLP2-7W
CHARACTERISTICS
General Specifications
Antenna Type VHLP ValuLine High Performance Low Profile Antenna, singlepolarized Diameter, nominal 0.6 m | 2 ft Polarization Single
Electrical Specifications
Beamwidth, Horizontal 4.7 Beamwidth, Vertical 4.7 Cross Polarization Discrimination (XPD) 32 dB Electrical Compliance ETSI 302 217 Class 3 FronttoBack Ratio 57 dB Gain, Low Band 29.5 dBi Gain, Mid Band 30.7 dBi Gain, Top Band 31.9 dBi Operating Frequency Band 7.125 8.500 GHz Radiation Pattern Envelope Reference (RPE) 7075A Return Loss 17.7 dB VSWR 1.30
Mechanical Specifications
Fine Azimuth Adjustment 10 Fine Elevation Adjustment 25 Mounting Pipe Diameter 48 mm115 mm | 1.9 in4.5 in Net Weight 14 kg | 31 lb Side Struts, Included 0
Product Specifications
2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 1 of 5 4/30/2011
Side Struts, Optional 0 Wind Velocity Operational 110 km/h | 68 mph Wind Velocity Survival Rating 250 km/h | 155 mph
Product Specifications
VHLP2-7W
2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications ar e subject to change. See www.commscope.com/andrew for the most current information. page 2 of 5 4/30/2011
Product Specifications
VHLP2-7W
2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information.
page 3 of 5 4/30/2011
Product Specifications
VHLP2-7W
2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 4 of 5 4/30/2011
throughout the world. Other ranges can be accommodated on special order. Radiation Pattern Envelope Reference (RPE) Radiation patterns determine an antennas ability to discriminate against unwanted signals under conditions of radio congestion. Radiation patterns are dependent on antenna series, size, and frequency. Return Loss The figure that indicates the proportion of radio waves incident upon the antenna that are rejected as a ratio of those that are accepted. Side Force (FS) Maximum side force exerted on the mounting pipe as a result of wind from the most critical direction for this parameter. The individual maximums specified may not occur simultaneously. All forces are referenced to the mounting pipe. Twisting Moment (MT) Maximum forces exerted on a supporting structure as a result of wind from the most critical direction for this parameter. The individual maximums specified may not occur simultaneously. All forces are referenced to the mounting pipe. VSWR Maximum is the guaranteed Peak VoltageStandingWaveRatio within the operating band. Wind Velocity Operational The wind speed where the antenna deflection is equal to or less than 0.1 degrees. In the case of ValuLine antennas, it is defined as a maximum deflection of 0.3 x the 3 dB beam width of the antenna. Wind Velocity Survival Rating The maximum wind speed the antenna, including mounts and radomes, where applicable, will withstand without permanent deformation. Realignment may be required. This wind speed is applicable to antenna with the specified amount of radial ice.
Product Specifications
VHLP2-7W
2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications ar e subject to change. See www.commscope.com/andrew for the most current information. page 5 of 5 4/30/2011
Product Specifications
VHLP4-15
1.2
CHARACTERISTICS
General Specifications
Antenna Type
Diameter, nominal
Polarization
Electrical Specifications
Beamwidth, Horizontal
Beamwidth, Vertical
Electrical Compliance
Front-to-Back Ratio
Return Loss
VSWR
Mechanical Specifications
Net Weight
VHLP
1.2 m | 4 ft
Single
1.2
1.2
30 dB
Brazil Anatel Class 2 | Canada SRSP 314.5 Part A | ETSI 302 217 Class 3
71 dB
42.7 dBi
42.9 dBi
43.1 dBi
17.7 dB
1.30
12
15
115 mm | 4.5 in
46 kg | 101 lb
1 inboard
2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information.
page 1 of 5 4/30/2011
Product Specifications
VHLP4-15
1 inboard
1570 Nm
115 kg | 254 lb
251 mm | 10 in
178 mm | 7 in
2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information.
page 2 of 5 4/30/2011
Product Specifications
VHLP4-15
2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information.
page 3 of 5 4/30/2011
Product Specifications
VHLP4-15
* Footnotes
Front-to-Back Ratio
Maximum forces exerted on a supporting structure as a result of wind from the most critical direction for this parameter. The individual maximums specified may not occur simultaneously. All forces are referenced to the mounting pipe.
The difference between the peak of the co-polarized main beam and the maximum cross-polarized signal over an angle twice the 3 dB beamwidth of the co-polarized main beam.
Denotes highest radiation relative to the main beam, at 180 40, across the band. Production antennas do not exceed rated values by more than 2 dB unless stated otherwise.
For a given frequency band, gain is primarily a function of antenna size. The gain of Andrew antennas is determined by either gain by comparison or by computer integration of the measured antenna patterns.
2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information.
page 4 of 5 4/30/2011
Product Specifications
VHLP4-15
Radiation Pattern Envelope Reference (RPE) Radiation patterns determine an antennas ability to discri minate against unwanted signals under conditions of radio congestion. Radiation patterns are dependent on antenna series, size, and frequency.
Return Loss
VSWR
The figure that indicates the proportion of radio waves incident upon the antenna that are rejected as a ratio of those that are accepted.
Maximum side force exerted on the mounting pipe as a result of wind from the most critical direction for this parameter. The individual maximums specified may not occur simultaneously. All forces are referenced to the mounting pipe.
Maximum forces exerted on a supporting structure as a result of wind from the most critical direction for this parameter. The individual maximums specified may not occur simultaneously. All forces are referenced to the mounting pipe.
The wind speed where the antenna deflection is equal to or less than 0.1 degrees. In the case of ValuLine antennas, it is defined as a maximum deflection of 0.3 x the 3 dB beam width of the antenna.
The maximum wind speed the antenna, including mounts and radomes, where applicable, will withstand without permanent deformation. Realignment may be required.
0.6 m | 2 ft ValuLine High Performance Low Profile Antenna, single-polarized, 7.1258.500 GHz VHLP2-7W CHARACTERISTICS
General Specifications Antenna Type VHLP - ValuLine High Performance Low Profile Antenna, single-polarized Diameter, nominal 0.6 m | 2 ft Polarization Single
Electrical Specifications Beamwidth, Horizontal 4.7 Beamwidth, Vertical 4.7 Cross Polarization Discrimination (XPD) 32 dB Electrical Compliance ETSI 302 217 Class 3 Front-to-Back Ratio 57 dB
Gain, Low Band 29.5 dBi Gain, Mid Band 30.7 dBi Gain, Top Band 31.9 dBi Operating Frequency Band 7.125 8.500 GHz Radiation Pattern Envelope Reference (RPE) 7075A Return Loss 17.7 dB VSWR 1.30
Mechanical Specifications Fine Azimuth Adjustment 10 Fine Elevation Adjustment 25 Mounting Pipe Diameter 48 mm115 mm | 1.9 in4.5 in Net Weight 14 kg | 31 lb Side Struts, Included 0 Product Specifications 2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 1 of 5 4/30/2011Side Struts, Optional 0 Wind Velocity Operational 110 km/h | 68 mph Wind Velocity Survival Rating 250 km/h | 155 mph
Wind Forces At Wind Velocity Survival Rating Axial Force (FA) 1066 N | 240 lbf
Side Force (FS) 496 N | 112 lbf Twisting Moment (MT) 382 Nm Weight with 1/2 in (12 mm) Radial Ice 25 kg | 54 lb Zcg with 1/2 in (12 mm) Radial Ice 178 mm | 7 in Zcg without Ice 125 mm | 5 in Product Specifications VHLP2-7W 2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 2 of 5 4/30/2011W i n d F o r c e s A t W i n d V e l o c i t y S u r v i v a l R a t i n g I m a g e
Product Specifications VHLP2-7W 2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 3 of 5 4/30/2011A n t e n n a D i m e n s i o n s A n d M o u n t i n g I n f o r m a t i o n
* Footnotes Axial Force (FA) Maximum forces exerted on a supporting structure as a result of wind from the most critical direction for this parameter. The individual maximums
specified may not occur simultaneously. All forces are referenced to the mounting pipe. Cross Polarization Discrimination (XPD) The difference between the peak of the co-polarized main beam and the maximum cross-polarized signal over an angle twice the 3 dB beamwidth of the co-polarized main beam. Front-to-Back Ratio Denotes highest radiation relative to the main beam, at 180 40, across the band. Production antennas do not exceed rated values by more than 2 dB unless stated otherwise. Gain, Mid Band For a given frequency band, gain is primarily a function of antenna size. The gain of Andrew antennas is determined by either gain by comparison or by computer integration of the measured antenna patterns. Operating Frequency Band Bands correspond with CCIR recommendations or common allocations used Product Specifications VHLP2-7W 2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 4 of 5 4/30/2011throughout the world. Other ranges can be accommodated on special order. Radiation Pattern Envelope Reference (RPE) Radiation patterns determine an antennas ability to discri minate against unwanted signals under conditions of radio congestion. Radiation patterns are dependent on antenna series, size, and frequency. Return Loss The figure that indicates the proportion of radio waves incident upon the antenna that are rejected as a ratio of those that are accepted.
Side Force (FS) Maximum side force exerted on the mounting pipe as a result of wind from the most critical direction for this parameter. The individual maximums specified may not occur simultaneously. All forces are referenced to the mounting pipe. Twisting Moment (MT) Maximum forces exerted on a supporting structure as a result of wind from the most critical direction for this parameter. The individual maximums specified may not occur simultaneously. All forces are referenced to the mounting pipe. VSWR Maximum is the guaranteed Peak Voltage-Standing-Wa v e-Ratio within the operating band. Wind Velocity Operational The wind speed where the antenna deflection is equal to or less than 0.1 degrees. In the case of ValuLine antennas, it is defined as a maximum deflection of 0.3 x the 3 dB beam width of the antenna. Wind Velocity Survival Rating The maximum wind speed the antenna, including mounts and radomes, where applicable, will withstand without permanent deformation. Realignment may be required. This wind speed is applicable to antenna with the specified amount of radial ice. Product Specifications VHLP2-7W 2011 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.All specifications are subject to change. See www.commscope.com/andrew for the most current information. page 5 of 5 4/30/2011
Home > Product > Antennas > Microwave Antenna Systems > ValuLine Antennas More Sharing ServicesShare|Share on facebookShare on myspaceShare on googleShare on twitter
ValuLine Antennas
ValuLine antennas provide a cost-effective solution for all terrestrial microwave systems operating at frequencies between 7 GHz and 60 GHz. These antennas are available in both single and dual polarized configurations and in sizes from 1 ft (0.3 m) to 6 ft (1.8 m) in diameter.
ValuLine High Performance Low Profile Antennas (VHLP series) To meet increasing demand for low visibility antenna systems, the ValuLine product range now
includes a new range of low profile shielded antennas (VHLP Series) offering excellent electrical performance in an antenna w
minimal environmental impact. Low profile antennas are available in frequencies from 7 GHz to 38 GHz and in sizes from 8 in m) to 4 ft (1.2 m) in diameter.
CommScope has worked with the world's leading radio houses to develop antennas that can be directly integrated with the o unit. These integrated line of Andrew antennas are available in all frequencies from 7 GHz to 38 GHz and in sizes from 8 in m) to 6 ft (1.8 m) in diameter. These integrated solutions, currently available for over 20 major radio suppliers, provide a significant benefit in overall system cost.
Home > Product > Antennas > Microwave Antenna Systems > ValuLine Antennas More Sharing ServicesShare|Share on facebookShare on myspaceShare on googleShare on twitter
ValuLine Antennas
ValuLine antennas provide a cost-effective solution for all terrestrial microwave systems operating at frequencies between 7 GHz and 60 GHz. These antennas are available in both single and dual polarized configurations and in sizes from 1 ft (0.3 m) to 6 ft (1.8 m) in diameter.
ValuLine High Performance Low Profile Antennas (VHLP series) To meet increasing demand for low visibility antenna systems, the ValuLine product range now includes a new range of low profile shielded antennas (VHLP Series) offering excellent electrical performance in an antenna with
minimal environmental impact. Low profile antennas are available in frequencies from 7 GHz to 38 GHz and in sizes from 8 in (0. m) to 4 ft (1.2 m) in diameter.
CommScope has worked with the world's leading radio houses to develop antennas that can be directly integrated with the outdo
unit. These integrated line of Andrew antennas are available in all frequencies from 7 GHz to 38 GHz and in sizes from 8 in (0.2 m) to 6 ft (1.8 m) in diameter. These integrated solutions, currently available for over 20 major radio suppliers, provide a significant benefit in overall system cost.