Professional Documents
Culture Documents
Open-Traj
1.
sweep_open-traj.prt
1.
1. (Insert) > (Sweep) > (Protrusion)
2. (Select Traj) > (Curve Chain) > (Select)
3. 1(Sketch 1) (Select All) >
(Done)
4.
5. (Palette)
6. (Profiles) T (T-profile)
0.5(Accept Changes)
7. (Standard Orientation)
8. (Done Section)
9. (Protrusion) (OK)
10. 1(Sketch 1)(Hide)
1.
2.
1. (Insert) > (Sweep) > (Cut)
2. (Sketch Traj) (Okay)
3. (Bottom)T
4. OFFSET RIGHT
7. (Line Tangent)
8. /(Trim/Delete Segment)
9. (Done Section)
0.4
: 3D
3D
3D
COIL.PRT
Open-Traj
1.
1.
1. (Insert) > (Sweep) > (Protrusion)
2. (Select Traj) > (One By One) > (Select)
3. 3-D (Select) (OK)
4. (Done) > (Accept) > (Okay)
5.
(Circle)
5.5
(Done Section)
7. (Appearance Gallery)
CTRL
(Select) (OK)
8. (Save)
(Black)
(OK)
Closed-Traj
1.
sweep_closed-traj.prt
1.
1. (Insert) > (Sweep) > (Protrusion)
2. (Select Traj) > (Curve Chain) > (Select)
3. 2(Sketch 2) (Select All) >
(Done)
4. (No Inn Fcs) > (Done)
5.
6. (Palette)
7. (Profiles) T (T-profile)
8. (Standard Orientation)
9. (Done Section)
1.
2.
1. 1379(Protrusion id 1379)
2. (Protrusion) (Attributes) (Define)
3. (Add Inn Fcs) > (Done)
4. /(Trim/Delete Segment)
5. (Standard Orientation)
6. (Done Section)
7. (Protrusion) (OK)
Sweep_Attributes
1.
sweep_attributes.prt
1.
1. FRONT
2. 429(Protrusion id 429)
3. (Protrusion) (Attributes) (Define)
4. (Merge Ends) > (Done)
5. (Protrusion) (OK)
blend.prt
Parallel_Blend
1.
1. 3
1. (Insert) > (Blend) > (Protrusion)
2. (Done) > (Straight) > (Done)
3.
4. (Palette)
blend_section1
1(Accept Changes)
5. (Toggle Section)
6. blend_section2 1
(Accept Changes)
7. (Toggle Section)
8. blend_section3 1(Accept Changes)
9. (Done Section)
10. 2 30 3 20
11. (Standard Orientation)(OK)
1.
2. 3
TOP RIGHT
3.
4. (No hidden)
5. (Centerline)
6. (Rectangle)
7. (Toggle Section)
8. (Rectangle)
9. (Toggle Section)
10. (Rectangle)
14. 2 20 3 30
15. (Standard Orientation)(OK)
: FLYWHEEL.PRT
Parallel_Blend
1.
FLYWHEEL.PRT
1. FLYWHEEL.PRT
1.
11.25 -11.25
4.
5.
CRANK
(References) (Close)
(Plane Display)
(No hidden)
(Circle)
CTRL (Construction)
(Axis Display)
6.
3 /(3-Point/Tangent End)
(Dimension)
7.
(Toggle Section) 2
3 /(3-Point/Tangent End)
(Dimension) 11
(Done Section)
8. (Both) 2.1
9. (Plane Display)
(Shading)
CTRL
+ D
10. (Thru Until) > (Done) FIN_HEIGHT(OK)
1.
2. ANGLE
1. ANGLE
2. ANGLE
(Dimension)
(Axis)
3. (Save)
(OK)
Blend_Attributes
1.
blend_attributes.prt
1.
1. 23(Protrusion id 23)
2. (Protrusion) (Attributes) (Define)
3. (Smooth) > (Done)
4. (Protrusion) (OK)
5. 153(Cut id 153)
6. (Cut) (Attributes)(Define)
7. (Smooth) > (Done)
8. (Cut) (OK)
9. CUT
Blend_Tools
1.
blend_section-tools.prt
1. 3
1. (Insert) > (Blend) > (Protrusion)
(Done) > (Done)
2. (Okay) > (Default)
3.
4. (Use Edge)
(Type) (Loop)
(Close)
5. (Start Point)
6. (Toggle Section)
7. (Centerline)
8. (Rectangle)
9. (Start Point)
10. (Sketch) > (Feature Tools) > (Blend
Vertex)
11. (Sketch) > (Feature Tools) > (Blend Vertex)
150 ENTER
75 ENTER