Professional Documents
Culture Documents
Hydraulic Excavator
Attachment
Hydraulic Controls Type ______________________________ combination of resistant steel plates and
Power distribution ________________ via control valve with integrated cast steel components
safety valves, simultaneous and inde- Hydraulic cylinders ________ Liebherr cylinders with special seal
pendent operation of travel drive, system. Shock absorption
swing drive and work attachment Pivots ____________________________ sealed, low maintenance
Control type Lubrication ____________________ centralized in easily accessible locations
Attachment and swing ____ proportional via joystick levers Hydraulic connections ____ pipes and hoses equipped with SAE split-
Travel ____________________________ proportional via foot pedal flange connections
Additional functions ____________ via switch and/or proportional foot Bucket __________________________ standard equipped with 26500 lb safety
pedals hook for lifting
Technical Data
2
X
E
D A
W C
H
M N
L
U B
Z T
V
Tires 10.00-20
Z Z
K K
I J Q Q
M N M N
L B L B
U S U T
K
J I Q
P M N B
L S
U T
with with with with Stick with hydr. adjustable boom with gooseneck boom
prop up 2 point prop up 4 point and and and 4 pt. and and and 4 pt.
blade outriggers blade and outriggers prop 2 pt. outr. or prop 2 pt. outr. or
2 point up outr. blade + 2 pt. up outr. blade + 2 pt.
outriggers blade outr. blade outr.
ft-in ft-in ft-in ft-in ft-in ft-in ft-in ft-in ft-in ft-in ft-in
A 8– 2 8– 2 8– 2 8– 2 V 5–11 23– 5 23– 5 23– 5 20– 6 20– 6 20– 6
B 8– 2 8– 2 8– 2 8– 2 6–10 21– 0 21– 0 21– 0 18–10 18–10 20– 0*
C 10– 6 10– 6 10– 6 10– 6 7–10 20– 4 20– 4 20– 4 18– 8 18– 8 20– 2*
D 8– 8 8– 8 8– 8 8– 8 9–10 19– 0 19– 0 20– 2* 19– 6 19– 6 21– 4*
E 9– 1 9– 1 9– 1 9– 1 12– 1 19– 6 19– 6 21– 7* 19–10 19–10 18– 8*
H 8– 3 8– 3 8– 3 8– 3
I 1– 4 – 1– 4 – W 5–11 10– 4 10– 4 10– 4 10– 8 10– 8 10– 8
J 1– 8 – 1– 8 – 6–10 10– 0 10– 0 10– 0 10– 4 10– 4 10– 4*
K 4– 3 4– 3 4– 3 4– 3 7–10 10– 2 10– 2 10– 2 10–11 10–11 10–11*
L 9– 0 9– 0 9– 0 9– 0 9–10 10– 8 10– 8 10– 8* 12– 9 12– 9 12–11*
M 4– 1 4– 1 4– 1 4– 1 12– 1 12– 7 12– 7 13– 5* 14– 5 14– 5 14– 9*
N 4– 7 3– 5 3– 5 3– 5
P – – 5– 1 – X 5–11 30– 8 30– 8 30– 8 29– 0 29– 0 29– 0
Q 1– 2 1– 2 1– 2 1– 2 6–10 30– 6 30– 6 30– 6 28– 8 28– 8 30– 0*
S 8– 2 – 8– 2 – 7–10 30– 8 30– 8 30– 8 29– 0 29– 0 30– 2*
T – 13– 2 13– 2 13– 2 9–10 30– 8 30– 8 31– 9* 28– 8 28– 8 29–10*
U 16– 1 41– 8 17– 3 16– 4 12– 1 29–10 29–10 30– 8* 27– 8 27– 8 28– 8*
Z 16– 1 16– 1 17– 3 17– 3
Z* 16– 1 16– 1 16– 2 16– 2 Dimensions are with attachment over steering axle
* Attachment over digging axle for better transport
E = tail radius dimensions
Dimensions
3
Digging envelope
1 stick 5’11”
ft m
2 stick 6’10”
11 3 stick 7’10”
35 4 stick 9’10”
10 5 stick 12’ 1”
30 9
0 0
-1
-5
-2
-10 -3
-4
-15
-5 1
2
3 Operating weight
-6
-20 4 The operating weight includes basic machine with 8 tires
-7 5 plus spacer rings, hydr. adjustable boom, 6’10” stick and
-25 1.05 cuyd bucket.
-8
11 10 9 8 7 6 5 4 3 2 1 0 m Undercarriage versions lb
35 30 25 20 15 10 5 0 ft A 914 litronic` with prop up blade 41670
A 914 litronic` with 2 pt. outriggers 42780
A 914 litronic` with prop up blade + 2 pt. outr. 45200
A 914 litronic` with 4 pt. outriggers 45860
Buckets
Cutting width SAE in 151) 171) 19 24 242) 26 33 41 49 55 55
Capacity SAE (heaped) cuyd 0.39 0.45 0.52 0.45 0.39 0.52 0.78 1.05 1.30 1.57 1.83
Max. material weight lb/cuyd 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2000
Weights
Standard bucket with
Liebherr teeth Z 13 C lb – – – 1080 – 1210 1410 1320 1500 1920 2050
Bucket with cutting edge lb – – – 1060 – 1190 1390 1570 1760 1900 –
HD bucket with
Liebherr teeth Z 16 C3) lb – – – 1460 1870 1390 1630 1830 2090 2230 –
Bucket with ejector
and Bofors-teeth lb 820 860 900 – – – – – – – –
For machine stability per ISO 10567 the max. stick length is:
Stabilizers raised ft-in 12–2 12–2 12–2 12–2 12–2 12–2 7–10 5–11 – – –
Prop up blade down ft-in 12–2 12–2 12–2 12–2 12–2 12–2 12– 2 7–10 – – –
2 point outriggers down ft-in 12–2 12–2 12–2 12–2 12–2 12–2 12– 2 12– 2 7–10 7–10 6–10
Prop up blade + 2 pt. outr. down ft-in 12–2 12–2 12–2 12–2 12–2 12–2 12– 2 12– 2 12– 2 12– 2 12– 2
4 point outriggers down ft-in 12–2 12–2 12–2 12–2 12–2 12–2 12– 2 12– 2 12– 2 12– 2 12– 2
1) max. digging depth 4’7”, since bucket suspension is wider than bucket
2) Ripper bucket with Liebherr-teeth Z 16 P
3) It is recommended to use these buckets only with 4 point outriggers down
Backhoe Attachment
with Hydr. Adjustable Boom
4
with stick 6’10” with stick 7’10”
Height Undercarriage Radius of load from centerline of machine in ft Height Undercarriage Radius of load from centerline of machine in ft
ft 10 15 20 25 ft 10 15 20 25
Stabilizers raised 9.7 (14.7+) 6.4 (10.9 h ) Stabilizers raised 9.7 (14.4+) 5.9 (10.5 ) 3.5 ( 7.0 )
Prop up blade down 10.6 (14.7+) 7.1 (13.7+) Prop up blade down 10.6 (14.4+) 6.6 (12.7+) 4.0 ( 9.1 h )
20 2 pt. outr. down 13.6 (14.7+) 9.1 (13.7+) 20 2 pt. outr. down 13.6 (14.4+) 8.4 (12.7+) 5.4 ( 9.1 h )
Blade + 2 pt. down 14.7+ (14.7+) 10.9 (13.7+) Blade + 2 pt. down 14.4+ (14.4+) 10.7 (12.7+) 7.1 ( 9.1 h )
4 pt. outr. down 14.7+ (14.7+) 13.7+ (13.7+) 4 pt. outr. down 14.4+ (14.4+) 12.7+ (12.7+) 9.1 h ( 9.1 h )
Stabilizers raised 16.1 (23.2+) 9.1 (15.8 ) 6.0 (10.4+) 3.7 ( 7.2 ) Stabilizers raised 16.6 (22.8+) 9.1 (15.3+) 5.8 (10.2 ) 3.7 ( 7.2 )
Prop up blade down 18.0 (23.2+) 10.1 (16.3+) 6.6 (14.1+) 4.2 (11.1 h ) Prop up blade down 18.6 (22.8+) 10.0 (15.3+) 6.4 (13.4+) 4.2 ( 9.4 h )
15 2 pt. outr. down 23.0 (23.2+) 13.0 (16.3+) 8.5 (14.1+) 5.6 (11.1 h ) 15 2 pt. outr. down 22.8+ (22.8+) 13.0 (15.3+) 8.3 (13.4+) 5.6 ( 9.4 h )
Blade + 2 pt. down 23.2+ (23.2+) 16.0 (16.3+) 10.5 (14.1+) 7.4 (11.1 h ) Blade + 2 pt. down 22.8+ (22.8+) 15.3+ (15.3+) 10.4 (13.4+) 7.4 ( 9.4 h )
4 pt. outr. down 23.2+ (23.2+) 16.3+ (16.3+) 13.7 (14.1+) 10.0 (11.1 h ) 4 pt. outr. down 22.8+ (22.8+) 15.3+ (15.3+) 13.4+ (13.4+) 9.4 h ( 9.4 h )
Stabilizers raised 15.9 (22.0+) 8.8 (15.2 ) 6.4 (10.3+) 3.3 ( 6.7 ) Stabilizers raised 15.0 (21.9+) 8.7 (14.8 ) 5.7 ( 9.9 ) 3.3 ( 6.7 )
Prop up blade down 17.8 (22.0+) 9.8 (19.9+) 7.1 (15.4+) 3.7 (12.6 ) Prop up blade down 16.9 (21.9+) 9.7 (18.6+) 6.3 (14.8+) 3.8 (12.5 )
10 2 pt. outr. down 22.0+ (22.0+) 12.7 (19.9+) 9.1 (15.4+) 5.1 (11.5 ) 10 2 pt. outr. down 21.9+ (21.9+) 12.6 (18.6+) 8.2 (14.8+) 5.1 (11.4 )
Blade + 2 pt. down 22.0+ (22.0+) 15.4 (19.9+) 10.4 (15.4+) 6.8 (12.6 h ) Blade + 2 pt. down 21.9+ (21.9+) 15.0 (18.6+) 10.0 (14.8+) 6.8 (12.7+)
4 pt. outr. down 22.0+ (22.0+) 19.9+ (19.9+) 13.3 (15.4+) 9.3 (12.6 h ) 4 pt. outr. down 21.9+ (21.9+) 18.6+ (18.6+) 13.1 (14.8+) 9.4 (12.7+)
Stabilizers raised 15.9 (27.5 h ) 8.8 (15.2 ) 6.2 (11.1+) 3.2 ( 6.6 ) Stabilizers raised 15.6 (26.7+) 8.7 (14.6 ) 5.8 ( 9.9 ) 3.2 ( 6.6 )
Prop up blade down 17.8 (27.5 h ) 9.8 (22.7+) 6.9 (16.9+) 3.6 (12.4 ) Prop up blade down 17.5 (26.7+) 9.7 (21.9+) 6.5 (16.3+) 3.6 (12.3 )
5 2 pt. outr. down 21.7 (27.5 h ) 12.7 (22.7+) 8.9 (16.3 ) 5.0 (11.8 ) 5 2 pt. outr. down 21.5 (26.7+) 12.6 (21.9+) 8.4 (16.1 ) 5.0 (11.2 )
Blade + 2 pt. down 27.5 h (27.5 h ) 15.4 (22.7+) 11.1 (16.9+) 6.8 (13.4+) Blade + 2 pt. down 26.7+ (26.7+) 14.8 (21.9+) 10.1 (16.3+) 6.8 (13.2+)
4 pt. outr. down 27.5 h (27.5 h ) 20.0 (22.7+) 13.2 (16.9+) 9.3 (13.1 ) 4 pt. outr. down 26.7+ (26.7+) 19.9 (21.9+) 13.0 (16.3+) 9.3 (13.0+)
Stabilizers raised 15.2 (29.9+) 8.6 (15.9 ) 5.4 (10.1 ) 3.2 ( 6.7 ) Stabilizers raised 15.2 (29.2 ) 8.5 (15.2 ) 5.9 (10.9 ) 3.2 ( 6.7 )
Prop up blade down 17.1 (33.6+) 9.5 (23.8+) 6.0 (17.4+) 3.7 (13.3 ) Prop up blade down 17.1 (31.3+) 9.4 (23.7+) 6.6 (17.1+) 3.6 (12.1 )
0 2 pt. outr. down 23.2 (33.6+) 12.4 (23.8+) 7.9 (16.6 ) 5.1 (12.1 ) 0 2 pt. outr. down 23.0 (31.3+) 12.4 (23.7+) 8.6 (16.5+) 5.1 (12.1 )
Blade + 2 pt. down 29.9 (33.6+) 16.1 (23.8+) 10.3 (17.4+) 6.9 (14.2+) Blade + 2 pt. down 29.4 (31.3+) 15.4 (23.7+) 11.1 (17.1+) 6.8 (13.2+)
4 pt. outr. down 33.6+ (33.6+) 20.6 (23.8+) 14.0 (17.4+) 9.5 (14.0 ) 4 pt. outr. down 31.3+ (31.3+) 20.5 (23.7+) 13.4 (17.1+) 9.4 (12.8 )
Stabilizers raised 14.4 (30.4 ) 8.1 (15.4 ) 4.6 ( 9.1 ) Stabilizers raised 14.2 (30.3 ) 7.9 (15.2 ) 4.6 ( 9.2 ) 2.7 ( 6.1 )
Prop up blade down 16.2 (38.0+) 9.0 (24.2+) 5.2 (17.8+) Prop up blade down 16.1 (37.7+) 8.8 (23.9+) 5.2 (17.4+) 3.2 (12.5 )
– 5 2 pt. outr. down 22.2 (38.0+) 11.9 (24.2+) 7.0 (16.8 ) – 5 2 pt. outr. down 22.1 (37.7+) 11.7 (23.9+) 7.0 (16.8 ) 4.6 (11.3 )
Blade + 2 pt. down 30.5 (38.0+) 15.7 (24.2+) 9.3 (17.8+) Blade + 2 pt. down 30.4 (37.7+) 15.4 (23.9+) 9.4 (17.4+) 6.3 (12.6+)
4 pt. outr. down 38.0+ (38.0+) 21.6 (24.2+) 12.9 (17.8+) 4 pt. outr. down 37.7+ (37.7+) 20.9 (23.9+) 12.9 (17.4+) 8.8 (12.6+)
Stabilizers raised 14.2 (30.2 ) 7.2 (14.4 ) 4.6 ( 9.4 ) Stabilizers raised 14.0 (30.0 ) 7.5 (15.0 ) 4.4 ( 9.1 )
Prop up blade down 16.1 (39.4+) 8.1 (24.6+) 5.2 (15.6+) Prop up blade down 15.9 (38.6+) 8.5 (25.3+) 5.0 (17.1+)
– 10 2 pt. outr. down 22.0 (39.4+) 11.0 (24.6+) 7.1 (15.6+) – 10 2 pt. outr. down 21.8 (38.6+) 11.4 (25.3+) 6.9 (17.1+)
Blade + 2 pt. down 30.3 (39.4+) 14.6 (24.6+) 9.6 (15.6+) Blade + 2 pt. down 30.1 (38.6+) 15.2 (25.3+) 9.3 (17.1+)
4 pt. outr. down 39.4+ (39.4+) 20.7 (24.6+) 13.4 (15.6+) 4 pt. outr. down 38.6+ (38.6+) 21.5 (25.3+) 13.0 (17.1+)
Stabilizers raised 15.0 (30.9+) Stabilizers raised 13.0 (28.7 ) 6.6 (13.7 )
Prop up blade down 17.1 (30.9+) Prop up blade down 14.8 (29.7+) 7.5 (15.0+)
– 15 2 pt. outr. down 23.9 (30.9+) – 15 2 pt. outr. down 20.7 (29.7+) 10.3 (15.0+)
Blade + 2 pt. down 30.9+ (30.9+) Blade + 2 pt. down 28.9 (29.7+) 14.0 (15.0+)
4 pt. outr. down 30.9+ (30.9+) 4 pt. outr. down 29.7+ (29.7+) 15.0+ (15.0+)
Lift capacities are stated in 1000 lb and can be lifted 360h on firm, level supporting surface. Loads in ( . . . ) can be lifted over end only. Capacities shown for
“Stabilizers raised” are valid only over the front or steering axle (travel position). Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or
87 % of hydraulic capacity. Indicated loads are limited by the weld-on safety hook to 26500 lb. Without bucket (1.05 cuyd) lift capacities increase by 1320 lb, and
without bucket cylinder, link and lever they increase by an additional 750 lb.
+ Rating limited by hoist cylinders
h Rating limited by stick cylinder
Note: When used within the countries of the “European Union” and when lifting a load, this excavator has to be equipped with an overload warning device and its
hoist cylinders with automatic check valves, according to the European Standard EN 474-5.
Lift Capacities
with Hydr. Adjustable Boom
5
Digging envelope
1 stick 5’11”
2 stick 6’10”
ft m 3 stick 7’10”
10 4 stick 9’10”
5 stick 12’ 1”
30 9
-1
-5
-2
-10 -3
-4
1
-15
-5
2
3 Operating weight
4 The operating weight includes basic machine with 8 tires
-20 -6 5 plus spacer rings with gooseneck boom, 6’10” stick and the
1.05 cuyd bucket.
-7
10 9 8 7 6 5 4 3 2 1 0m
Undercarriage versions lb
30 25 20 15 10 5 0 ft A 914 litronic` with prop up blade 39910
A 914 litronic` with 2 pt. outriggers 41010
A 914 litronic` with prop up blade + 2 pt. outr. 43440
A 914 litronic` with 4 pt. outriggers 44100
Buckets
Cutting width SAE in 151) 171) 19 22 242) 26 33 41 49 55 55
Capacity SAE (heaped) cuyd 0.39 0.45 0.52 0.45 0.39 0.52 0.78 1.05 1.30 1.57 1.83
Max. material weight lb/cuyd 3000 3000 3000 3000 3000 3000 3000 3000 3000 2500 2000
Weights
Standard bucket
with Liebherr teeth Z 13 C lb – – – 1080 – 1210 1410 1320 1500 1920 2050
Bucket with cutting edge lb – – – 1060 – 1190 1390 1570 1760 1900 –
HD bucket with
Liebherr teeth Z 16 C3) lb – – – 1460 1870 1390 1630 1830 2090 2230 –
Bucket with ejector
and Bofors-teeth lb 820 860 900 – – – – – – – –
For machine stability per ISO 10567 the max. stick length is:
Stabilizers raised ft-in 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 7–10 – – –
Prop up blade down ft-in 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 9–10 6–10 – –
2 point outriggers down ft-in 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 9–10 7–10
Prop up blade + 2 pt. outr. down ft-in 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4
4 point outriggers down ft-in 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4
1) max. digging depth 4’7”, since bucket suspension is wider than bucket
2) Ripper bucket with Liebherr-teeth Z 16 P
3) It is recommended to use these buckets only with 4 point outriggers down
Backhoe Attachment
with Gooseneck Boom 16’5”
6
with stick 6’10” with stick 7’10”
Height Undercarriage Radius of load from centerline of machine in ft Height Undercarriage Radius of load from centerline of machine in ft
ft 10 15 20 25 ft 10 15 20 25
Stabilizers raised 5.6 (10.2 ) Stabilizers raised 5.4 (10.0 ) 3.4 ( 6.7 )
Prop up blade down 6.2 (11.1+) Prop up blade down 6.1 (10.2+) 3.8 ( 8.6 h )
20 2 pt. outr. down 8.0 (11.1+) 20 2 pt. outr. down 7.9 (10.2+) 5.2 ( 8.6 h )
Blade + 2 pt. down 10.4 (11.1+) Blade + 2 pt. down 10.2+ (10.2+) 6.9 ( 8.6 h )
4 pt. outr. down 11.1+ (11.1+) 4 pt. outr. down 10.2+ (10.2+) 8.6 h ( 8.6 h )
Stabilizers raised 13.8 (21.4 h ) 8.0 (13.9+) 5.1 ( 9.6 ) 3.2 ( 6.5 ) Stabilizers raised 14.5 (21.3+) 8.0 (13.6+) 4.9 ( 9.4 ) 3.1 ( 6.3 )
Prop up blade down 15.6 (21.4 h ) 8.9 (13.9+) 5.7 (11.9+) 3.7 (10.2 h ) Prop up blade down 16.4 (21.3+) 9.0 (13.6+) 5.5 (11.1+) 3.5 (10.0 h )
15 2 pt. outr. down 21.4 (21.4 h ) 11.7 (13.9+) 7.5 (11.9+) 5.0 (10.2 h ) 15 2 pt. outr. down 21.3+ (21.3+) 11.8 (13.6+) 7.3 (11.1+) 4.8 (10.0 h )
Blade + 2 pt. down 21.4 h (21.4 h ) 13.9+ (13.9+) 9.8 (11.9+) 6.7 (10.2 h ) Blade + 2 pt. down 21.3+ (21.3+) 13.6+ (13.6+) 9.6 (11.1+) 6.5 (10.0 h )
4 pt. outr. down 21.4 h (21.4 h ) 13.9+ (13.9+) 11.9+ (11.9+) 9.1 (10.2 h ) 4 pt. outr. down 21.3+ (21.3+) 13.6+ (13.6+) 11.1+ (11.1+) 8.9 (10.0 h )
Stabilizers raised 12.8 (17.9 h ) 6.8 (13.8 ) 4.5 ( 8.9 ) 3.0 ( 6.2 ) Stabilizers raised 11.5 (11.7 h ) 6.8 (13.9 ) 4.4 ( 8.8 ) 2.8 ( 6.1 )
Prop up blade down 14.6 (17.9 h ) 7.7 (17.2+) 5.1 (13.3+) 3.4 (11.6+) Prop up blade down 11.7 h (11.7 h ) 7.7 (16.1+) 4.9 (12.7+) 3.3 (11.0+)
10 2 pt. outr. down 17.9 h (17.9 h ) 10.5 (17.2+) 6.8 (13.3+) 4.7 (11.2 ) 10 2 pt. outr. down 11.7 h (11.7 h ) 10.5 (16.1+) 6.7 (12.7+) 4.6 (11.0 )
Blade + 2 pt. down 17.9 h (17.9 h ) 14.1 (17.2+) 9.1 (13.3+) 6.4 (11.6+) Blade + 2 pt. down 11.7 h (11.7 h ) 14.1 (16.1+) 9.0 (12.7+) 6.2 (11.0+)
4 pt. outr. down 17.9 h (17.9 h ) 17.2+ (17.2+) 12.6 (13.3+) 8.8 (11.6+) 4 pt. outr. down 11.7 h (11.7 h ) 16.1+ (16.1+) 12.5 (12.7+) 8.6 (11.0+)
Stabilizers raised 10.8 (11.2 h ) 6.1 (12.9 ) 4.0 ( 8.4 ) 2.8 ( 6.0 ) Stabilizers raised 9.8 h ( 9.8 h ) 6.0 (12.9 ) 3.9 ( 8.3 ) 2.6 ( 5.8 )
Prop up blade down 11.2 h (11.2 h ) 7.0 (20.2+) 4.6 (14.9+) 3.2 (12.0 ) Prop up blade down 9.8 h ( 9.8 h ) 6.9 (19.5+) 4.5 (14.3+) 3.0 (11.8 )
5 2 pt. outr. down 11.2 h (11.2 h ) 9.7 (20.2+) 6.4 (14.9+) 4.5 (10.9 ) 5 2 pt. outr. down 9.8 h ( 9.8 h ) 9.6 (19.5+) 6.2 (14.3+) 4.3 (10.7 )
Blade + 2 pt. down 11.2 h (11.2 h ) 13.2 (20.2+) 8.6 (14.9+) 6.2 (12.2+) Blade + 2 pt. down 9.8 h ( 9.8 h ) 13.1 (19.5+) 8.5 (14.3+) 6.0 (11.8+)
4 pt. outr. down 11.2 h (11.2 h ) 18.9 (20.2+) 12.1 (14.9+) 8.6 (12.2+) 4 pt. outr. down 9.8 h ( 9.8 h ) 18.9 (19.5+) 11.9 (14.3+) 8.4 (11.8+)
Stabilizers raised 10.8 (11.7 h ) 6.0 (12.8 ) 3.9 ( 8.3 ) 2.7 ( 6.0 ) Stabilizers raised 10.7 (13.1 h ) 5.9 (12.7 ) 3.7 ( 8.1 ) 2.5 ( 5.8 )
Prop up blade down 11.7 h (11.7 h ) 6.8 (21.9+) 4.5 (16.0+) 3.2 (11.9 ) Prop up blade down 12.4 (13.1 h ) 6.7 (21.5+) 4.3 (15.6+) 3.0 (11.7 )
0 2 pt. outr. down 11.7 h (11.7 h ) 9.5 (21.9+) 6.3 (15.6 ) 4.5 (10.9 ) 0 2 pt. outr. down 13.1 h (13.1 h ) 9.4 (21.5+) 6.1 (15.4 ) 4.3 (10.6 )
Blade + 2 pt. down 11.7 h (11.7 h ) 13.1 (21.9+) 8.5 (16.0+) 6.1 (12.6+) Blade + 2 pt. down 13.1 h (13.1 h ) 13.0 (21.5+) 8.4 (15.6+) 5.9 (12.3+)
4 pt. outr. down 11.7 h (11.7 h ) 18.8 (21.9+) 11.9 (16.0+) 8.5 (12.6+) 4 pt. outr. down 13.1 h (13.1 h ) 18.7 (21.5+) 11.8 (15.6+) 8.3 (12.3+)
Stabilizers raised 10.9 (25.1 h ) 5.9 (12.7 ) 3.8 ( 8.2 ) Stabilizers raised 10.7 (23.0 h ) 5.7 (12.5 ) 3.6 ( 8.0 ) 2.5 ( 5.8 )
Prop up blade down 12.6 (25.1 h ) 6.8 (21.3+) 4.4 (15.6+) Prop up blade down 12.4 (23.0 h ) 6.6 (21.4+) 4.2 (15.6+) 3.0 (11.9 )
– 5 2 pt. outr. down 18.1 (25.1 h ) 9.4 (21.3+) 6.2 (15.5 ) – 5 2 pt. outr. down 17.9 (23.0 h ) 9.3 (21.4+) 5.9 (15.2 ) 4.3 (10.8 )
Blade + 2 pt. down 25.1 h (25.1 h ) 13.0 (21.3+) 8.4 (15.6+) Blade + 2 pt. down 23.0 h (23.0 h ) 12.8 (21.4+) 8.2 (15.6+) 6.0 (12.2+)
4 pt. outr. down 25.1 h (25.1 h ) 18.7 (21.3+) 11.8 (15.6+) 4 pt. outr. down 23.0 h (23.0 h ) 18.5 (21.4+) 11.6 (15.6+) 8.4 (12.2+)
Stabilizers raised 11.4 (25.5+) 6.0 (12.9 ) 4.0 ( 8.4 ) Stabilizers raised 11.1 (25.8 ) 5.8 (12.6 ) 3.7 ( 8.1 )
Prop up blade down 13.1 (25.5+) 6.9 (18.6+) 4.6 (13.6+) Prop up blade down 12.8 (27.1+) 6.7 (19.2+) 4.3 (13.6+)
– 10 2 pt. outr. down 18.6 (25.5+) 9.6 (18.6+) 6.3 (13.6+) – 10 2 pt. outr. down 18.3 (27.1+) 9.4 (19.2+) 6.0 (13.6+)
Blade + 2 pt. down 25.5+ (25.5+) 13.1 (18.6+) 8.6 (13.6+) Blade + 2 pt. down 26.0 (27.1+) 12.9 (19.2+) 8.3 (13.6+)
4 pt. outr. down 25.5+ (25.5+) 18.6+ (18.6+) 12.0 (13.6+) 4 pt. outr. down 27.1+ (27.1+) 18.6 (19.2+) 11.7 (13.6+)
Stabilizers raised 6.7 (13.6 ) Stabilizers raised 11.8 (21.2+) 6.3 (13.2 )
Prop up blade down 7.6 (13.7+) Prop up blade down 13.5 (21.2+) 7.2 (13.5+)
– 15 2 pt. outr. down 10.3 (13.7+) – 15 2 pt. outr. down 19.1 (21.2+) 9.9 (13.5+)
Blade + 2 pt. down 13.7+ (13.7+) Blade + 2 pt. down 21.2+ (21.2+) 13.4 (13.5+)
4 pt. outr. down 13.7+ (13.7+) 4 pt. outr. down 21.2+ (21.2+) 13.5+ (13.5+)
Lift capacities are stated in 1000 lb and can be lifted 360h on firm, level supporting surface. Loads in ( . . . ) can be lifted over end only. Capacities shown for
“Stabilizers raised” are valid only over the front or steering axle (travel position). Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or
87 % of hydraulic capacity. Indicated loads are limited by the weld-on safety hook to 26500 lb. Without bucket (1.05 cuyd) lift capacities increase by 1320 lb, and
without bucket cylinder, link and lever they increase by an additional 750 lb.
+ Rating limited by hoist cylinders
h Rating limited by stick cylinder
Note: When used within the countries of the “European Union” and when lifting a load, this excavator has to be equipped with an overload warning device and its
hoist cylinders with automatic check valves, according to the European Standard EN 474-5.
Lift Capacities
with Gooseneck Boom 16’5”
7
Digging envelope
1 stick 5’11”
ft m 2 stick 6’10”
9 3 stick 7’10”
4 stick 9’10”
8 5 stick 12’ 1”
25
7
Stick length ft-in 5–11 6–10 7–10 9–10 12– 1
20 6 Max. digging depth ft-in 20– 8 19– 8 19– 8 24–7 26–10
Max. reach at
5 ground level ft-in 26–10 27– 8 28– 8 30–6 32– 9
15
Max. dumping
4
height ft-in 19– 0 19– 6 20– 2 19–8 22–11
10 3
Camshell model: 10 B
2 Max. tooth force: 73 kN (16320 lb)
5 Max. torque of hydr. swivel 1.76 kNm
1
0 0
-1
-5
-2
-10 -3
-4
-15
-5
-20 -6
2
1 Operating weight
3
-7 The operating weight includes basic machine with 8 tires
4
-25 plus spacer rings, hydr. adjustable boom, 6’10” stick and the
-8 5 clamshell model 10 B/0.78 cuyd.
-9 Undercarriage versions lb
10 9 8 7 6 5 4 3 2 1 0 m
A 914 litronic` with prop up blade 42330
30 25 20 15 10 5 0 ft
A 914 litronic` with 2 pt. outriggers 43430
A 914 litronic` with prop up blade + 2 pt. outr. 45860
A 914 litronic` with 4 pt. outriggers 46520
Clamshell model 10 B
without ejector with ejector
Width of shells in 13 16 24 31 39 39 59 71 13 16 24 31
Capacity SAE (heaped) cuyd 0.22 0.29 0.46 0.59 0.78 1.30 1.97 2.35 0.22 0.29 0.46 0.59
Max. material weight lb/cuyd 3000 3000 3000 3000 3000 2000 2000 2000 3000 3000 3000 3000
Weight incl. suspension
and hydr. swivel lb 1690 1807 1890 2000 2140 2290 2550 2820 1810 1940 2090 2230
For machine stability per ISO 10567 the max. stick length is:
Stabilizers raised ft-in 12–2 12–2 9–10 6–10 – – – – 12–2 12–2 7–10 6–10
Prop up blade down ft-in 12–2 12–2 12– 2 9–10 6–10 – – – 12–2 12–2 9–10 7–10
2 point outriggers down ft-in 12–2 12–2 12– 2 12– 2 12– 2 9–10 – – 12–2 12–2 12– 2 12– 2
Prop up blade + 2 pt. outr. down ft-in 12–2 12–2 12– 2 12– 2 12– 2 12– 2 7–10 6–10 12–2 12–2 12– 2 12– 2
4 point outriggers down ft-in 12–2 12–2 12– 2 12– 2 12– 2 12– 2 12– 2 12– 2 12–2 12–2 12– 2 12– 2
Clamshell Attachment
with Hydr. Adjustable Boom
8
Digging envelope
1 stick 5’11”
2 stick 6’10”
ft m 3 stick 7’10”
8
4 stick 9’10”
25 5 stick 12’ 1”
7
2
Camshell model: 10 B
5 Max. tooth force: 73 kN (16320 lb)
1 Max. torque of hydr. swivel: 1.76 kNm
0 0
-1
-5
-2
-10 -3
-4
-15
-5
1
2
-20 -6 3
-7
4 Operating weight
5 The operating weight includes basic machine with 8 tires
-25
-8 plus spacer rings, gooseneck boom, 6’10” stick and the
10 9 8 7 6 5 4 3 2 1 0 m clamshell model 10 B/0.78 cuyd.
30 25 20 15 10 5 0 ft Undercarriage versions lb
A 914 litronic` with prop up blade 40560
A 914 litronic` with 2 pt. outriggers 41660
A 914 litronic` with prop up blade + 2 pt. outr. 44100
A 914 litronic` with 4 pt. outriggers 44750
Clamshell model 10 B
without ejector with ejector
Width of shells in 13 16 24 31 39 39 59 71 13 16 24 31
Capacity SAE (heaped) cuyd 0.22 0.29 0.46 0.59 0.78 0.30 0.97 2.35 0.22 0.29 0.46 0.59
Max. material weight lb/cuyd 3000 3000 3000 3000 3000 2000 2000 2000 3000 3000 3000 3000
Weight incl. suspension
and hydr. swivel lb 1690 1807 1890 2000 2140 2290 2550 2820 1810 1940 2090 2230
For machine stability per ISO 10567 the max. stick length is:
Stabilizers raised ft-in 12–1 12–1 12–1 6–10 6–10 – – – 12–1 12–1 12–1 7–10
Prop up blade down ft-in 12–1 12–1 12–1 12– 1 7–10 6–10 – – 12–1 12–1 12–1 6–10
2 point outriggers down ft-in 12–1 12–1 12–1 12– 1 12– 1 12– 1 6–10 – 12–1 12–1 12–1 12– 1
Prop up blade + 2 pt. outr. down ft-in 12–1 12–1 12–1 12– 1 12– 1 12– 1 12– 1 7–10 12–1 12–1 12–1 12– 1
4 point outriggers down ft-in 12–1 12–1 12–1 12– 1 12– 1 12– 1 12– 1 12– 1 12–1 12–1 12–1 12– 1
Clamshell Attachment
with Gooseneck Boom 16’5”
9
Digging envelope
1 stick 5’11”
ft m 2 stick 6’10”
3 stick 7’10”
11 4 stick 9’10”
35
5 stick 12’ 1”
10
30 9
Stick length ft-in 5–11 6–10 7–10 9–10 12–1
8 Max. digging depth ft-in 15– 7 16– 6 17– 6 19– 6 21–9
25 Max. reach at
7 ground level ft-in 26– 5 27– 2 28– 2 30– 0 32–3
Max. dumping
20 6 height ft-in 24– 3 24– 9 25– 5 26– 6 28–2
Max. teeth height ft-in 29–10 30– 4 31– 0 29– 6 33–4
5
15
4
10 3
2
5
1
0 0
-1
-5
-2
-10 -3
-4 Operating weight
-15 1
-5 2 The operating weight includes basic machine with 8 tires
3
4
plus spacer rings, hydr. adjustable boom, 6’10” stick and the
-20 -6 0.92 cuyd ditchcleaning bucket.
5
-7 Undercarriage versions lb
10 9 8 7 6 5 4 3 2 1 0m
A 914 litronic` with prop up blade 41450
30 25 20 15 10 5 0 ft A 914 litronic` with 2 pt. outriggers 42550
A 914 litronic` with prop up blade + 2 pt. outr. 44970
A 914 litronic` with 4 pt. outriggers 45630
Ditchcleaning bucket
Cutting width SAE in 59 791) 79 95 79 (with 2 x 45h rotator)
Capacity SAE (heaped) cuyd 0.65 0.59 0.92 1.11 0.92
Max. material weight lb/cuyd 3000 3000 3000 3000 3000
Weight of bucket lb 840 880 1060 1150 1570
For machine stability per ISO 10567 the max. stick length is:
Stabilizers raised ft-in 12–2 12–2 7–10 – 6–10
Prop up blade down ft-in 12–2 12–2 9–10 6–10 7–10
2 point outriggers down ft-in 12–2 12–2 12– 2 12– 2 12– 2
Prop up blade + 2 pt. outr. down ft-in 12–2 12–2 12– 2 12– 2 12– 2
4 point outriggers down ft-in 12–2 12–2 12– 2 12– 2 12– 2
Ditchcleaning Attachment
with Hydr. Adjustable Boom
10
Digging envelope
1 stick 5’11”
2 stick 6’10”
ft m 3 stick 7’10”
4 stick 9’10”
9 5 stick 12’ 1”
8
25
7 Stick length ft-in 5–11 6–10 7–10 9–10 12– 1
Max. digging depth ft-in 12–11 13–11 14–11 16– 9 19– 2
20 6 Max. reach at
ground level ft-in 24– 3 25– 1 26– 1 27– 8 30– 0
5 Max. dumping
15 height ft-in 21– 0 21– 4 21– 9 22– 5 23– 3
4 Max. teeth height ft-in 26– 7 26– 8 27– 2 26– 3 28–10
10 3
2
5
1
0 0
-1
-5
-2
-10 -3
1
-4 2
3
-15
-5 4
5 Operating weight
-6
10 9 8 7 6 5 4 3 2 1 0 m The operating weight includes basic machine with 8 tires
plus spacer rings, gooseneck boom, 6’10” stick and the
0.92 cuyd ditchcleaning bucket.
30 25 20 15 10 5 0 ft
Undercarriage versions lb
A 914 litronic` with prop up blade 39680
A 914 litronic` with 2 pt. outriggers 40780
A 914 litronic` with prop up blade + 2 pt. outr. 43210
A 914 litronic` with 4 pt. outriggers 43870
Ditchcleaning bucket
Cutting width SAE in 59 791) 79 95 79 (with 2 x 45h rotator)
Capacity SAE (heaped) cuyd 0.65 0.59 0.92 1.11 0.92
Max. material weight lb/cuyd 3000 3000 3000 3000 3000
Weight of bucket lb 840 880 1060 1150 1570
For machine stability per ISO 10567 the max. stick length is:
Stabilizers raised ft-in 12–2 12–2 12–2 7–10 7–10
Prop up blade down ft-in 12–2 12–2 12–2 9–10 9–10
2 point outriggers down ft-in 12–2 12–2 12–2 12– 2 12– 2
Prop up blade + 2 pt. outr. down ft-in 12–2 12–2 12–2 12– 2 12– 2
4 point outriggers down ft-in 12–2 12–2 12–2 12– 2 12– 2
Ditchcleaning Attachment
with Gooseneck Boom 16’5”
11
Standard Equipment Optional Equipment
Undercarriage
x Two speed powershift transmission plus creeper speed x Independent outrigger control
x Creeper speed electrically switchable from cab x Second lockable rust free storage box in u/c
x Two circuit travel brake with accumulator x Customized colors
x Proportional power steering with mechanical back up x Choice of tires
x Service free parking brake inside transmission (spring
activated)
x Auto check valve directly on each stabilizer cylinder
x Clam travel bracket
x Lockable large rustfree storage box
x New tires
Uppercarriage
x Engine hood with lift help x Electric fuel tank filler pump
x Lockable tool box x Pedal controlled positioning swing brake
x Main switch for electric circuit x Extended tool kit
x Handrails, non slip surfaces x Customized colors
x Tool kit
x Maintenance-free swing brake lock
x Maintenance-free HD-batteries
x Sound insulation
x Pin lock upper/lower
Hydraulics
x Electronic pump regulation at all R.P.M. x Additional hydraulic circuits
x Four fixed modes, can also be adjusted x Bio degradable hydraulic oil
x Pressure storage for controlled lowering of attachments with x Full flow micro filtration
engine turned off
x Hydraulic tank shut-off valve
x Pressure compensation
x Flow compensation
x Filter with partial micro filtration (5 mm)
x Hook ups for pressure checks
LHB/VF 8420660-2-11.00 Printed in Germany by Gagstatter. Illustrations and data may differ from standard equipment. Subject to change without notice.
Engine
x Direct injection x Cold start aid
x Turbo charger
x Air filter with pre-cleaner main- and safety element
x Sensor controlled engine idling
Operator’s cab
x Deep drawn cab shell components x Removable lower section of front window with storage
x All tinted windows x Preparation for radio installation
x Door with sliding window x Stereo radio
x All-round adjustable roof vent x Airpressure adjustable seat with heating and headrest
x Rain hood over front window opening x Beacon
x Wiper/washer x Optical and acoustical warning if outriggers are not fully
x 6-way adjustable seat retracted
x Seat and consoles independently adjustable x Electronic drive away lock
x Air condition x Additional flood lights
x Cloth hook x Fan
x Dome light x Bullet proof front window (fixed installation – can not be
x Sun shade opened)
x Inside rear mirror
x Cigarette lighter and ashtray
x Removable customized foot mat
x Storage compartment
x Warning lights
x Digital instruments for oil temp, engine R.P.M. and oil pressure
x Additional mechanical hour meter, readable from outside the
cab
Attachment
x Cylinders with shock absorber x Safety check valves for all attachment cylinders
x Sealed pivots x Overload warning device
x Centralized lube points x Hydraulic or manual quick change tool adaptor
x SAE-dbl flange connection for all hi-pressure lines x Hose quick connections
x Locking of connecting link during clam work x Liebherr line of clams and grapples
x Safety lift hook on hoe buckets x Spezial buckets and other tools
x Hydr. lines for clam operation on stick x Customized colors
x Two way valves for bucket/clam use
x Flood light on boom and cab
x Y-flange seals at bucket/stick pivot
Options and/or special attachments, supplied by vendors other than Liebherr, are only to be
installed with the knowledge and approval of Liebherr to retain warranty.
LIEBHERR Construction Equipment Co., 4100 Chestnut Avenue, Newport News, VA 23607, USA,
ç (7 57) 2 45-52 51, Fax (7 57) 9 28-87 00, www.liebherr.com, E-Mail: info@lce.liebherr.com
With compliments: