Professional Documents
Culture Documents
www.vishay.com
Vishay Semiconductors
Cathode
Anode
PRODUCT SUMMARY
Package IF(AV) VR VF at IF IRM TJ max. Diode variation EAS SMB 1.0 A 15 V 0.21 V 35 mA at 100 C 125 C Single die 1.0 mJ
DESCRIPTION
The VS-10BQ015-M3 surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. The proprietary barrier technology allows for reliable operation up to 125 C junction temperature. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection.
VOLTAGE RATINGS
PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-10BQ015-M3 15 25 UNITS V
Revision: 29-May-12
Document Number: 93349 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10BQ015-M3
www.vishay.com
Vishay Semiconductors
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL 1A Maximum forward voltage drop See fig. 1 VFM (1) 2A 1A 2A Maximum reverse leakage current See fig. 2 Threshold voltage Forward slope resistance Typical junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width = 300 s, duty cycle = 2 % IRM VF(TO) rt CT LS dV/dt TJ = 25 C TJ = 100 C TJ = TJ maximum VR = 5 VDC, (test signal range 100 kHz to 1 MHz), 25 C Measured lead to lead 5 mm from package body Rated VR TEST CONDITIONS TJ = 25 C TJ = 125 C VR = Rated VR VALUES 0.33 0.39 0.21 0.29 0.5 35 390 2.0 10 000 mA V m pF nH V/s V UNITS
SYMBOL TJ
(1)
TEST CONDITIONS
UNITS C
dP tot 1 ------------ < ------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Mounted 1" square PCB
(2)
Revision: 29-May-12
Document Number: 93349 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10BQ015-M3
www.vishay.com
Vishay Semiconductors
100
10
100 C
TJ = 125 C
10
75 C
1 TJ = 100 C TJ = 75 C Tj = 25C
50 C
25 C
0.1
0.1 0.0
1000
100
10 0 3 6 9 12 15
VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
10
t2
Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 10 100
0.0001
0.001
Revision: 29-May-12
Document Number: 93349 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10BQ015-M3
www.vishay.com
0.4
Vishay Semiconductors
D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20
110 100 90 80 70 60 50 0.0 Square wave (D = 0.50) 80 % rated VR applied see note (1) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 DC
0.3
RMS limit
0.2
DC 0.1
0 0.3 0.6 0.9 1.2 1.5 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
1000 At any rated load condition and with rated VRRM applied following surge
100
tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current
Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
Revision: 29-May-12
Document Number: 93349 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-10BQ015-M3
www.vishay.com ORDERING INFORMATION TABLE
Device code
Vishay Semiconductors
VS1 1 2 3 4 5 6 -
10
2
B
3
Q
4
015
5
-M3
6
Vishay Semiconductors product Current rating B = SMB Q = Schottky Q series Voltage rating (015 = 15 V) Environmental digit: -M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free
LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information www.vishay.com/doc?95401 www.vishay.com/doc?95403 www.vishay.com/doc?95404
Revision: 29-May-12
Document Number: 93349 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customers technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 12-Mar-12