Professional Documents
Culture Documents
Description
The A1301 and A1302 are continuous-time, ratiometric, linear Hall-effect sensor ICs. They are optimized to accurately provide a voltage output that is proportional to an applied magnetic field. These devices have a quiescent output voltage that is 50% of the supply voltage. Two output sensitivity options are provided: 2.5 mV/G typical for the A1301, and 1.3 mV/G typical for the A1302. The Hall-effect integrated circuit included in each device includes a Hall circuit, a linear amplifier, and a CMOS Class A output structure. Integrating the Hall circuit and the amplifier on a single chip minimizes many of the problems normally associated with low voltage level analog signals. High precision in output levels is obtained by internal gain and offset trim adjustments made at end-of-line during the manufacturing process. These features make the A1301 and A1302 ideal for use in position sensing systems, for both linear target motion and rotational target motion. They are well-suited for industrial applications over extended temperature ranges, from 40C to 125C. Two device package types are available: LH, a 3-pin SOT23W type for surface mount, and UA, a 3-pin ultramini SIP for through-hole mount. They are lead (Pb) free (suffix, T) with 100% matte tin plated leadframes.
Packages: 3-pin SOT23W (suffix LH), and 3-pin SIP (suffix UA)
Not to scale
VCC
To all subcircuits
Filter
Amp
Out
VOUT
Gain CBYPASS
Offset
Trim Control
GND
A1301-DS, Rev. 18
Selection Guide
Part Number A1301EUA-T A1301KLHLT-T A1301KUA-T A1302ELHLT-T A1302KLHLT-T A1302KUA-T Packing* Bulk, 500 pieces/bag 7-in. tape and reel, 3000 pieces/reel Bulk, 500 pieces/bag 7-in. tape and reel, 3000 pieces/reel 7-in. tape and reel, 3000 pieces/reel Bulk, 500 pieces/bag Package SIP Surface Mount SIP Surface Mount Surface Mount SIP Ambient, TA 40C to 85C 40C to 125C 40C to 85C 40C to 125C 1.3 mV/G 2.5 mV/G Sensitivity (Typical)
Allegro MicroSystems, LLC 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
Pin-out Drawings
Package LH
3
Package UA
Terminal List Symbol VCC VOUT GND Number Package LH Package UA 1 1 2 3 3 2 Description Connects power supply to chip Output from circuit Ground
Allegro MicroSystems, LLC 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
DEVICE CHARACTERISTICS over operating temperature range, TA, and VCC = 5 V, unless otherwise noted Characteristic Symbol Test Conditions Min. Electrical Characteristics Running, TJ < 165C 4.5 Supply Voltage VCC Supply Current ICC Output open VOUT(High) ISOURCE = 1 mA, Sens = nominal 4.65 Output Voltage VOUT(Low) ISINK = 1 mA, Sens = nominal Output Bandwidth BW VCC(min) to 0.95 VOUT; B = 1400 G; Power-On Time tPO Slew rate = 4.5 V/s to 4.5 V/100 ns Output Resistance ROUT ISINK 1 mA, ISOURCE 1 mA External output low pass filter 10 kHz; Wide Band Output Noise, rms VOUTN Sens = nominal Ratiometry Quiescent Output Voltage Error VOUTQ(V) TA = 25C with respect to VCC1 Magnetic Sensitivity Error with Sens(V) TA = 25C respect to VCC2 Output Linearity Lin TA = 25C Symmetry Sym TA = 25C Magnetic Characteristics Quiescent Output Voltage VOUTQ B = 0 G; TA = 25C 2.4 Quiescent Output Voltage over VOUTQ(TA) B = 0 G 2.2 Operating Temperature Range A1301; TA = 25C 2.0 Magnetic Sensitivity Sens A1302; TA = 25C 1.0 A1301 1.8 Magnetic Sensitivity over Sens(TA) Operating Temperature Range A1302 0.85 1Refer to equation (4) in Ratiometric section on page 4. 2Refer to equation (5) in Ratiometric section on page 4.
Max. 6 11 0.25 5 5
Units V mA V V kHz s V
3.0 3.0 2.5 3.0 2.6 2.8 3.0 1.6 3.2 1.75
Allegro MicroSystems, LLC 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
Quiescent Output Voltage. In the quiescent state (no significant magnetic field: B = 0), the output, VOUTQ, equals one half of the supply voltage, VCC, throughout the entire operating ranges of VCC and ambient temperature, TA. Due to internal component tolerances and thermal considerations, there is a tolerance on the quiescent output voltage, VOUTQ, which is a function of both VCC and TA. For purposes of specification, the quiescent output voltage as a function of temperature, VOUTQ(TA), is defined as:
VOUTQ() = VOUTQ() VOUTQ(25C) Sens(25C)
(4)
(5)
where Sens is in mV/G, and the result is the device equivalent accuracy, in gauss (G), applicable over the entire operating temperature range. Sensitivity. The presence of a south-polarity (+B) magnetic field, perpendicular to the branded face of the device package, increases the output voltage, VOUT, in proportion to the magnetic field applied, from VOUTQ toward the VCC rail. Conversely, the application of a north polarity (B) magnetic field, in the same orientation, proportionally decreases the output voltage from its quiescent value. This proportionality is specified as the magnetic sensitivity of the device and is defined as:
Sens = VOUT(B) VOUT(+B) 2B
Linearity and Symmetry. The on-chip output stage is designed to provide linear output at a supply voltage of 5 V. Although the application of very high magnetic fields does not damage these devices, it does force their output into a nonlinear region. Linearity in percent is measured and defined as:
Lin+ = VOUT(+B) VOUTQ 2 (VOUT(+B) VVOUTQ ) VOUT(B) VOUTQ 2(VOUT(B) VOUTQ) 100%
(6)
(2)
Lin =
100%
(7)
The stability of the device magnetic sensitivity as a function of ambient temperature, Sens (TA) (%) is defined as:
Sens() = Sens() Sens(25C) Sens(25C) 100%
(3)
(8)
Allegro MicroSystems, LLC 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
1301 Device Sensitivity vs. Ambient Temperature 2.65 2.60 Sensitivity (mV/G) 2.55 2.50 2.45 2.40 2.35 50 25 0 25 50 75 Temperature (C) 100 125 150 LH Package Sensitivity (mV/G) UA Package 1.36 1.34 1.32 1.30 1.28 1.26 1.24 -50 1.40 1.38
UA Package
LH Package
-25
2.60
2.55
2.55
2.50
2.50
2.45
2.45
2.40 50
25
125
150
2.40 50
25
125
150
Sensitivity (mV/G)
Sensitivity (mV/G)
3.0
2.5
2.0
1.5 4.5
6.0
1.0 4.5
6.0
1301 Device VOUTQ vs. Supply Voltage 3.5 Output Voltage (V) Output Voltage (V) 3.5
3.0
3.0
2.5
2.5
2.0
2.0
1.5 4.5
6.0
1.5 4.5
6.0
1301 Device LIN+ and LIN vs. Supply Voltage 100.4 100.3 LIN Linearity (%) Linearity (%) 100.2 100.1 100.0 LIN+ 99.9 99.8 4.5 99.9 100.0
LIN+
6.0
99.6 4.5
6.0
1301 Device Symmetry vs. Supply Voltage 100.0 99.9 99.8 Symmetry (%) Symmetry (%) 99.7 99.6 99.5 99.4 99.3 99.2 99.1 99.0 4.5 100.5 100.4 100.3 100.2 100.1 100.0 99.9 99.8 99.7 99.6 5.0 5.5 Supply Voltage (V) 6.0 99.5 4.5
6.0
Allegro MicroSystems, LLC 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
44 +0.020 0.1800.053
+0.19 1.91 0.06 0.25 MIN 1.00 1 2 0.55 REF 0.25 BSC Seating Plane Gauge Plane 8X 10 REF Branded Face
2.40 0.70
0.95
B
1.00 0.13
NNT
1
C
Standard Branding Reference View N = Last two digits of device part number T = Temperature code
For Reference Only; not for tooling use (reference dwg. 802840) Dimensions in millimeters Dimensions exclusive of mold flash, gate burrs, and dambar protrusions Exact case and lead configuration at supplier discretion within limits shown
A B
Active Area Depth, 0.28 mm REF Reference land pattern layout All pads a minimum of 0.20 mm from all adjacent pads; adjust as necessary to meet application process requirements and PCB layout tolerances Branding scale and appearance at supplier discretion Hall element, not to scale
C D
Allegro MicroSystems, LLC 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
45
B
2.04
1.52 0.05
E
1.44
10
E
1.02 MAX
NNN
1 1 2 3 D Standard Branding Reference View = Supplier emblem N = Last three digits of device part number
14.99 0.25
+0.03 0.41 0.06 For Reference Only; not for tooling use (reference DWG-9065) Dimensions in millimeters Dimensions exclusive of mold flash, gate burrs, and dambar protrusions Exact case and lead configuration at supplier discretion within limits shown +0.05 0.43 0.07 A
B C
D E
1.27 NOM
Allegro MicroSystems, LLC 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
Revision History
Revision Rev. 18 Revision Date April 26, 2013 Description of Revision Update UA package drawing
Copyright 2005-2013, Allegro MicroSystems, LLC Allegro MicroSystems, LLC reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegros products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use.
For the latest version of this document, visit our website: www.allegromicro.com
Allegro MicroSystems, LLC 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
10