You are on page 1of 17

Chapter 20

Chapter 20 Electrochemistry Electrochemistry deals with the relationships between electricity and chemical reactions. Oxidation-reduction (redox) reactions were introduced in Chapter 4 Can be simple displacement reactions: Zn(s) + Cu2+(aq) Zn2+(aq) + Cu(s) Cu(s) + 2Ag+(aq) Cu2+(aq) + 2Ag(s)

20.1 Oxidation-Reduction Reactions Redox reactions can also be more complex, with structural and composition changes as well as an exchange of electrons. 5VO2+(aq) + MnO4-(aq) + H2O(l) 5VO2+(aq) + Mn2+(aq) + 2H+(aq) 5Fe2+(aq) + MnO4-(aq) + 8H+(aq) 5Fe3+(aq) + Mn2+(aq) + 4H2O(l) Oxidation and Reduction You cant have one without the other! Oxidation Decrease in number of electrons (loss of electrons) Increase in oxidation number Oxidation number: -3 -2 -1 0 +1 +2 +3 Increase in number of electrons (gain of electrons) Decrease in oxidation number Reduction Half-Reactions Oxidation-reduction reactions can be written as separate oxidation and reduction reactions, called half-reactions. Oxidation: VO2+(aq) + H2O(l) VO2+(aq) + 2H+(aq) + eVO2+ is called the reducing agent (or reductant), because it causes the reduction of another substance; the reducing agent is oxidized in the process Reduction: MnO4-(aq) + 8H+(aq) + 5e- Mn2+(aq) + 4H2O(l) MnO4- is called the oxidizing agent (or oxidant), because it causes the oxidation of another substance; the oxidizing agent is reduced in the process Oxidation-reduction can be considered to be the competition between two substances for electrons. The one with the greater attraction for additional electrons becomes the oxidizing agent; the one with the least is the reducing agent.

20-1

Chapter 20

Spontaneous Oxidation-Reduction Reactions If we place a metal in a solution of another metal ion, sometimes we get metal deposition, sometimes not. How do we decide? Zn + Sn2+ Zn2+ + Sn Sn + Zn2+ no rxn How do we know which substances will act as oxidizing agents or as reducing agents? An activity series gives the relative activity of substances as oxidizing or reducing agents. Review from Chapter 4. Determine an activity series in several ways: activity in displacing H2 from water activity in displacing metals from metal ion solutions (more active metal displaces a less active metal from solution) generation of an electrochemical potential or voltage Spontaneous Redox Na displaces H2 from H2O Zn displaces Pb from a solution of Pb2+ Pb + 2Ag+ Pb2+ + 2Ag Ag + Pb2+ no rxn The reverse reactions can be made to occur with electric current, but they are not spontaneous. General rule, using an activity series: stronger stronger weaker weaker oxidizing + reducing reducing + oxidizing agent agent agent agent Depending on the relative strengths, the reaction can go to completion, or reach a state of equilibrium. Activity Series

20-2

Chapter 20

Predict which of the following combinations will undergo an oxidation-reduction reaction: Mg + K+ Mg + Zn2+ H2 + Ni2+ H2 + Cu2+

20.2 Balancing Oxidation-Reduction Equations Some redox equations can be balanced by inspection, just like other types of reactions. Zn + CuCl2 ZnCl2 + Cu Net ionic equation: Zn + Cu2+ Zn2+ + Cu Need to balance atoms and charge What is wrong with the following? Al + Cu2+ Al3+ + Cu Balancing Equations 5Cr + 3MnO4 + 8H2O 5CrO42- + 3Mn2+ + 16H+ How do we balance an equation as complex as this? Two methods: half-reaction method oxidation number change method Will focus on the half-reaction method since it is useful in more circumstances.
3+ -

Half-Reaction Method Write an unbalanced half-reaction for either oxidation or reduction. Balance the half-reaction: a. Balance all atoms other than H and O. b. Balance O by adding H2O to the equation. c. Balance H by adding H+ to the equation. d. Balance ionic charges by adding electrons to the equation. e. If in basic solution, add OH- to each side of the equation to neutralize all the H+. f. Cancel any H2O occurring on both sides. Write an unbalanced half-reaction for the other process. Balance by the same procedure. Equalize the number of electrons lost and gained by multiplying each coefficient in each half-reaction by the appropriate constant. Add the two half-reactions and cancel equal amounts of anything occurring on both sides. Make a final check of atom and charge balances. Balancing Equations Cr3+ + MnO4- CrO42- + Mn2+ How do we balance this equation in acidic solution? 1. Cr3+ CrO422a. Cr already balanced 2b. Cr3+ + 4H2O CrO422c. Cr3+ + 4H2O CrO42- + 8H+
20-3

Chapter 20

2d. Cr3+ + 4H2O CrO42- + 8H+ + 3e3. MnO4- Mn2+ 4a. Mn already balanced 4b. MnO4- Mn2+ + 4H2O 4c. MnO4- + 8H+ Mn2+ + 4H2O 4d. MnO4- + 8H+ + 5e- Mn2+ + 4H2O 5. 3 e- lost, but 5 e- gained. Equalize by multiplying half-reactions: 5(Cr3+ + 4H2O CrO42- + 8H+ + 3e-) 3(MnO4- + 8H+ + 5e- Mn2+ + 4H2O) 5Cr3+ + 20H2O 5CrO42- + 40H+ + 15e3MnO4- + 24H+ + 15e- 3Mn2+ + 12H2O 6. Add the equations: 5Cr3+ + 3MnO4- + 20H2O + 24H+ + 15e- 5CrO42- + 3Mn2+ + 12H2O + 40H+ + 15eCancel any substances on both sides of the equation: 5Cr3+ + 3MnO4- + 8H2O 5CrO42- + 3Mn2+ + 16H+ 7. Check atom and charge balance: 5 Cr, 3 Mn, 20 O, 16 H, 12 + charges on each side Balancing Equations in Basic Solution Neutralize any H with OH- to form H2O and add the same number of OH- to the other side of the equation. Cr3+ + 4H2O CrO42- + 8H+ + 3eAdd 8OH- to each side of the equation: Cr3+ + 4H2O + 8OH- CrO42- + 8H+ + 8OH- + 3eForm water by neutralization: Cr3+ + 4H2O + 8OH- CrO42- + 8H2O + 3eCancel any water occurring on both sides: Cr3+ + 8OH- CrO42- + 4H2O + 3e+

Balance the following equation in acidic solution: MnO4- + Cl- Mn2+ + ClO3-

20.3 Voltaic Cells Voltaic (or galvanic) cells: spontaneous redox electricity (or electrical work) Electrolysis cells: electricity redox To produce electricity, we must direct the electron flow through an external circuit. We cannot have direct redox. Daniell cell: Zn - Cu Voltaic Cells To produce electricity, we need: Isolated half-reactions, using half-cells Conductive solids (electrodes) connected by external circuits May consist of a reactant/product or be an inert substance such as platinum or graphite Anode: oxidation half-reaction

20-4

Chapter 20

Cathode: reduction half-reaction Externally, the anode has the negative charge; internally, it has a positive charge) Anions flow towards the anode; cations move away from it and towards the cathode. Two half-cells must be connected to pass ions Salt bridge or porous glass

20.4 Cell EMF If the half-reactions are carried out separately (but coupled), we find they generate an electrical current characterized by a voltage (or electromotive force or electrical potential). This is the force pushing electrons through the circuit. The voltage produced by a voltaic cell is called the cell potential, Eocell (also the reaction potential, Eorxn, when the half-reactions are not separated) The voltage is called the standard electromotive force (emf), Eo, under standard conditions. = E ox + Values are determined relative to the standard hydrogen electrode, with Eo = 0 V Eored = emf for the reduction half-rxn Eoox = emf for the oxidation half-rxn Eocell = Eored + Eoox We can only measure Eocell, so we must define a standard reference to get Eoox and Eored. Eocell
o

Eored

Electromotive Force

Eo Values Reference for Eo is the standard hydrogen electrode, using the reaction: 2H+(aq) + 2e- H2(g) Eo = 0 1M 1 atm (std conditions) Cell Potential Other values are then measured from Eocell with the standard hydrogen electrode or with other known half-cells. Eo = 0.22 V AgCl + e- Ag + Cl Hg2Cl2 + 2e- 2Hg + 2Cl- Eo = 0.2802 V Half-cells such as these are used as reference electrodes. The Ag/AgCl electrode, along with a glass electrode, is used in a pH meter. Eo Values Then get other half-reaction potentials from measured Eocell values. Zn + 2H+ Zn2+ + H2 Eocell = 0.76 V 2+ Zn Zn + 2e Eoox = 0.76 V since Eored = 0.00 V Reference to Hydrogen Electrode The E of the hydrogen electrode is defined as 0.00 V. What would be the values of Eo for other half-reactions if this were defined as 1.00 V? The Eo of the hydrogen electrode is defined as 0.00 V. What would be the values of Eo for other half-reactions if this were defined as 1.00 V?
o

20-5

Chapter 20

What would be the Eo values of overall redox reactions if the reference were defined as 1.00 V? What would be the Eo values of overall redox reactions if the reference were defined as 1.00 V? Eo Values If we reverse a half-reaction, we change the sign of Eo. Zn2+ + 2e- Zn Eored = -0.76 V o Measure a value of E cell = 0.63 V for the following reaction. Zn + Pb2+ Zn2+ + Pb What is the Eored of Pb2+ + 2e- Pb ? Eoox = 0.76 V Zn Zn2+ + 2ePb2+ + 2e Pb Eored = ? 2+ 2+ Eocell = 0.63 V Zn + Pb Zn + Pb Eocell = Eored + Eoox 0.63 V = Eored + 0.76 V Eored = 0.63 V - 0.76 V = -0.13 V Values determined in this way are listed in Table 20.1 and Appendix E. Reduction Potentials

20.5 Spontaneity of Redox Reactions A redox reaction is spontaneous if Eorxn > 0. To determine spontaneity, add the two half-reactions and their Eo values to see if Eorxn has a positive value. What will happen if we place a piece of Zn and a piece of Cu in a solution that contains a mixture of Zn2+ and Cu2+?
20-6

Chapter 20

Two possibilities: Zn + Cu2+ Zn2+ + Cu Cu + Zn2+ Cu2+ + Zn Spontaneous Redox Two possible reduction half-reactions: Eored = -0.76 V Zn2+ + 2e- Zn 2+ Cu + 2e Cu Eored = 0.34 V Two possible oxidation half-reactions: Zn Zn2+ + 2eEoox = 0.76 V Cu Cu2+ + 2eEoox = -0.34 V Two ways to combine them: Zn2+ + 2e- Zn Eored = -0.76 V 2+ Cu Cu + 2e Eoox = -0.34 V 2+ 2+ Eorxn = -1.10 V Cu + Zn Cu + Zn Two ways to combine them: Cu2+ + 2e- Cu Eored = 0.34 V 2+ Zn Zn + 2e Eoox = 0.76 V Eorxn = 1.10 V Zn + Cu2+ Zn2+ + Cu The combination with Eorxn > 0 is spontaneous. Predicting Reactions Vanadium Reduction Potentials: VO2+ + 2H+ + e- VO2+ + H2O Ered = +1.00 V VO2+ + 2H+ + e- V3+ + H2O Ered = +0.36 V Ered = -0.26 V V3+ + e- V2+ 2+ V + 2e V Ered = -1.20 V Chromium Reduction Potentials: Cr2O72- + 14H+(aq) + 6e- 2Cr3+(aq) + 7H2O(l) Cr3+(aq) + e- Cr2+(aq) Cr2+(aq) + 2e- Cr(s) Manganese Reduction Potentials: MnO4-(aq) + e- MnO42-(aq) MnO42-(aq) + 4H+(aq) + 2e- MnO2(s) + 2H2O(l) MnO2(s) + 4H+(aq) + e- Mn3+(aq) + 2H2O(l) Mn3+(aq) + e- Mn2+(aq) Mn2+(aq) + 2e- Mn(s) Predicting Reactions Add excess Cr to VO2 . What is the product? Cr3+(aq) + e- Cr2+(aq) Ered = -0.41 V 2+ 3+ Cr (aq) Cr (aq) + e Eox = 0.41 V VO2+ + 2H+ + e- VO2+ + H2O Ered = +1.00 V VO2+ + 2H+ + e- V3+ + H2O Ered = +0.36 V
2+ +

Ered = +1.33 V Ered = -0.41 V Ered = -0.91 V Ered = +0.56 V Ered = +2.26 V Ered = +0.95 V Ered = +1.51 V Ered = -1.18 V

20-7

Chapter 20

V3+ + e- V2+ Ered = -0.26 V 2+ V + 2e V Ered = -1.20 V Product is V2+, because successive Eorxn = 1.41, 0.77, 0.15, -0.79 V Predicting Reactions Add excess Cr to Cr2O72-. What is the product? Cr2O72- + 14H+(aq) + 6e- 2Cr3+(aq) + 7H2O(l) Ered = +1.33 V Cr3+(aq) + e- Cr2+(aq) Ered = -0.41 V 2+ Cr (aq) + 2e Cr(s) Ered = -0.91 V Product is Cr2+; the successive values of Eorxn are 2.24 and 0.50 V. Predicting Reactions Add excess Cr2+ to Cr2O72-. What is the product? Cr2O72- + 14H+(aq) + 6e- 2Cr3+(aq) + 7H2O(l) Ered = +1.33 V Cr3+(aq) + e- Cr2+(aq) Ered = -0.41 V 2+ Cr (aq) + 2e Cr(s) Ered = -0.91 V Predicting Reactions Add excess V2+ to MnO4-. What is the product? V2+ V3+ + eMnO4-(aq) + e- MnO42-(aq) MnO42-(aq) + 4H+(aq) + 2e- MnO2(s) + 2H2O(l) MnO2(s) + 4H+(aq) + e- Mn3+(aq) + 2H2O(l) Mn3+(aq) + e- Mn2+(aq) Mn2+(aq) + 2e- Mn(s) Predicting Reactions Add Mn to MnO4 . What is the product? MnO4-(aq) + e- MnO42-(aq) MnO42-(aq) + 4H+(aq) + 2e- MnO2(s) + 2H2O(l) MnO2(s) + 4H+(aq) + e- Mn3+(aq) + 2H2O(l) Mn3+(aq) + e- Mn2+(aq) Mn2+(aq) + 2e- Mn(s)
2+ -

Eox = 0.26 V Ered = +0.56 V Ered = +2.26 V Ered = +0.95 V Ered = +1.51 V Ered = -1.18 V

Ered = +0.56 V Ered = +2.26 V Ered = +0.95 V Ered = +1.51 V Ered = -1.18 V

Predict no reaction, but reaction actually occurs to form Mn3+ or MnO2. We will deal with this discrepancy in the next section. It arises from the fact that there are more half-reactions that could be considered, which arise from combinations of these half-reactions. Stability in Aqueous Systems Disproportionation Reactions A substance reacts with itself to form new substances with higher and lower oxidation numbers. No examples with V or Cr. MnO42- will disproportionate: MnO4-(aq) + e- MnO42-(aq) Ered = +0.56 V + 2MnO4 (aq) + 4H (aq) + 2e MnO2(s) + 2H2O(l) Ered = +2.26 V

20-8

Chapter 20

3MnO42- + 4H+ 2MnO4- + MnO2 + 2H2O Eorxn = 1.70 V Stability in Aqueous Systems 3+ Mn will disproportionate: MnO2(s) + 4H+(aq) + e- Mn3+(aq) + 2H2O(l) Ered = +0.95 V 3+ 2+ Mn (aq) + e Mn (aq) Ered = +1.51 V 2Mn3+ + 2H2O Mn2+ + MnO2 + 4H+ Eorxn = 0.56 V Stability in Aqueous Systems Reaction with Water Reduce hydronium ion to release hydrogen gas: 2H+(aq) + 2e- H2(g) Ered = 0.000 V Any substance with Eoox > 0 will reduce H+ to H2 Examples are V, V2+, Cr, Cr2+, Mn The ions will react, but tend to react only very slowly. There seems to be a kinetic factor that results in a fast reaction only if Eorxn > 0.4-0.5 V (called an overvoltage). Reaction with Water Oxidize water to release oxygen gas: 2H2O(l) O2(g) + 4H+(aq) + 4e- Eox = -1.23 V Any Eored > 1.23 V will result in production of O2. Generally need Eorxn > 0.4-0.5 V for fast reaction. Examples are Cr2O72- (very slow), MnO42- (disproportionates faster), Mn3+ (disproportionates faster) Stability in Aqueous Systems Oxidation by O2 in Air O2(g) + 4H+(aq) + 4e- 2H2O(l) Ered = 1.23 V Any Eoox > -1.23 V will result in oxidation by air. Many substances fall into this category (Eorxn > 0.4-0.5 V for fast reaction). V Cr Mn V2+ Cr2+ not Mn2+ 3+ 3+ V not Cr Mn3+ VO2+ (very slow) not MnO2 MnO42- (disproportionates faster) EMF and Free Energy Change We have seen three criteria for spontaneity: Eo > 0 1 J = 1 coul x 1 V Go < 0 K >> 1 These criteria are related: Go = -RT lnK Go = - nFEo, G = - nFE where n = number of e- transferred and F = Faraday constant (charge on 1 mole e-) 1 F = 96,500 coul/mol e- = 96,500 J/V mol e20-9

Chapter 20

Thermodynamics These relationships work for half-reactions or complete redox reactions. Zn + Cu2+ Zn2+ + Cu Eo = 1.10 n=2 Go = -2mol e- x 96500 J/V mol e- x 1.10 V Go = -212,300 J = -212.3 kJ Go depends on the number of moles, but Eo does not Voltage and Moles Note that different size alkaline cells all deliver the same voltage, in spite of different number of moles of reactants. We can add E ox to to give to give an overall reaction. Fe Fe2+ + 2eEoox = +0.44 V o G ox = - 2 x 96500 x 0.44 = -84900 J Cl2 + 2e- 2ClEored = 1.36 V Gored = - 2 x 96500 x 1.36 = -262500 J Fe + Cl2 Fe2+ + 2ClEorxn = 1.80 V Go = - 2 x 96500 x 1.80 = -347400 J Gorxn = Goox + Gored = -84.9 + -262.5 = -347.4 kJ From Chapter 19, we know that Go values are additive when we add reactions. Eos are additive when we add half-reactions to give a complete reaction because the value of n is the same for the half-reactions and the complete reaction. Eos are not additive when adding two half-reactions to give a third half-reaction because the value of n is not constant. We can add Go under all circumstances: Go3 = Go1 + Go2 -n3FEo3 = -n1FEo1 - n2FEo2 n3Eo3 = n1Eo1 + n2Eo2 Eo3 = (n1Eo1 + n2Eo2)/n3 V V2+ + 2eEo1 = 1.20 V V2+ V3+ + eEo2 = 0.26 V 3+ V V + 3e Eo3 < 1.20 + 0.26 Eo3 = (2 x 1.20 + 1 x 0.26)/3 = 0.887 V Given the first two half-reactions, what is the value of Ered for the third? MnO4-(aq) + e- MnO42-(aq) E1,red = +0.56 V MnO42-(aq) + 4H+(aq) + 2e- MnO2(s) + 2H2O(l) E2.red = +2.26 V MnO4-(aq) + 4H+(aq) + 3e- MnO2(s) + 2H2O(l) E3,red = ? E3,red = 1.69 V This is why we could not make correct predictions for this system earlier.
20-10
o

Eored

Eocell

Thermodynamics or Eorxn in the same way that we can add half-reactions

Chapter 20

We can calculate Keq from E : Go = - nFEo = - RT ln K Eo = (RT/nF) ln K = 2.303 (RT/nF) log K At 25oC, 2.303 RT/F = 0.05916 Eo = (0.05916/n) log K at 25oC Thus, we can measure Eo for a redox reaction and then calculate the equilibrium constant for that reaction.

Thermodynamics

20.6 Effect of Concentraiton on Cell EMF So far, we have been using standard state conditions, but we dont always have 1 M solutions. We can correct Eo to E by using the Nernst equation. G = Go + RT ln Q But, G = - nFE and Go = -nFEo, so - nFE = -nFEo + 2.303 RT log Q E = Eo - (2.303 RT/nF) log Q At 25oC, E = Eo - (0.05916/n) log Q Nernst Equation At 25oC, E = Eo - (0.05916/n) log Q E = Eo if Q = 1 When the system reaches equilibrium, Q = K, and E = 0, because Eo = (0.05916/n) log K, and the cell has run down. Consider the Zn/Cu2+ reaction if more Cu2+ is added to the cell. The voltage becomes greater than 1.10 V. What is E of the Zn/Cu2+ reaction if [Cu2+] = 0.010 M and [Zn2+] =1.99 M? Note that this corresponds to starting with standard conditions and changing to 99% completion of reaction. Eo = 1.10 V (with [Cu2+] = [Zn2+] = 1.00 M) Zn + Cu2+ Zn2+ + Cu For this reaction, n = 2. Q = [Zn2+]/[Cu2+] E = Eo - (0.05916/n) log Q E = 1.10 V - (0.05916/2) log (1.99/0.010) E = 1.10 V - (0.05916/2) log 199 E = 1.10 - 0.068 = 1.03 V For 99.9% reaction (1.999 M Zn2+, 0.001 M Cu2+), E = 1.10 - 0.098 = 1.00 V For 99.99% reaction, 1.9999 M Zn2+, 0.0001 M Cu2+), E = 1.10 - 0.127 = 0.97 V Concentration Cells We can generate a voltage with a cell that contains the same materials in the cathode and anode compartments, but at different concentrations. 20.7 Batteries (Voltaic Cells) Voltaic cells are used as portable electricity sources. one unit = cell

20-11

Chapter 20

several cells = battery Commercial cells: Anode: usually a metal that can be oxidized Cathode: usually an inert conductor surrounded by a substance with a high oxidation number that can be reduced Electrolyte: aqueous solution or moist paste for ion movement Electrolytes: acidic, alkaline, organic liquid, molten salt, solid state Primary cells: one use, then discard Secondary cells: rechargeable, reusable Consider some commercial cells and batteries What are the anode and cathode? What is used as an electrolyte? What half-reactions are used? What voltage is generated? LeClanche Dry Cell Used in flashlight batteries. Electrolyte is NH4Cl Zn Zn2+ + 2eEo = 0.763 V + Eo = 0.5 V 2MnO2 + 2NH4 + 2H2O + 2e 2NH4OH + 2MnO(OH) Zn + 2MnO2 + 2NH4+ + 2H2O Zn2+ + 2NH4OH + 2MnO(OH) Eo = 1.26 V The measured voltage is actually 1.5 V, because concentrations are higher than standard state concentrations. Alkaline Dry Cell Electrolyte is KOH Zn + 2OH- ZnO + H2O + 2e2MnO2 + H2O + 2e- 2OH- + Mn2O3 Zn + 2MnO2 ZnO + Mn2O3 E = 1.5 V Reactions are similar to the acidic dry cell Can be recharged a few times Lead Storage Battery Used in automobiles Eo = 1.69 V PbO2 + 4H+ + SO42- + 2e- PbSO4 + 2H2O 2Pb + SO4 PbSO4 + 2e Eo = 0.35 v + 2Pb + PbO2 + 2SO4 + 4H 2PbSO4 + 2H2O Eo = 2.04 V With 6 M H2SO4, the cell produces 2.0 V; the voltage decreases as the cell reactions occur. Six cells connected in series makes up the common 12 V car battery. Can be recharged: 2PbSO4 + 2H2O Pb + PbO2 + 2SO42- + 4H+ Must pass 2 V per cell back through the battery to recharge. Rapid recharging can electrolyze the acid, producing hydrogen gas, which might explode, or which can dislodge the lead oxide or sulfate, which shortens the battery life.

20-12

Chapter 20

NiCad Cell Used in rechargeable power tools. Rechargeable because the reaction products stick to the electrodes. Cd + 2OH- Cd(OH)2 + 2eEo = 0.81 V NiO2 (on Ni) + 2H2O + 2e Ni(OH)2 + 2OH Eo = 0.49 V Cd + NiO2 + 2H2O Cd(OH)2 + Ni(OH)2 Eo = 1.30 V Silver Cell Used in cameras, watches, hearing aids Electrolyte is 20-40% KOH Zn + 2OH- ZnO + H2O + 2e2AgO + H2O + 2e- Ag2O + 2OHZn + 2AgO + H2O Zn(OH)2 + Ag2O Rechargeable if dont pass this point. After the AgO is depleted: Zn + Ag2O + H2O Zn(OH)2 + 2Ag Eo = 1.25 V Eo = 0.61 V Eo = 1.86 V Eo = 1.58 V

Fuel Cell Used for space travel, and in new hydrogen fuel automobiles Reactants are stored external to the cell and introduced to the electrodes as they are needed. The reactants are usually gaseous, such as O2 and H2, or O2 and CH4, or O2 and NH3. O2 + 2H2O + 4e- 4OHEo = 0.40 V Eo = 0.83 V 2H2 + 4OH 4H2O + 4e 2H2 + O2 2H2O Eo = 1.23 V Recent development uses butane

20.8 Corrosion Corrosion of Iron Since Ered(Fe2+) < Ered(O2) iron can be oxidized by oxygen. Cathode: O2(g) + 4H+(aq) + 4e- 2H2O(l). Anode: Fe(s) Fe2+(aq) + 2e-. Dissolved oxygen in water usually causes the oxidation of iron. Fe2+ initially formed can be further oxidized to Fe3+ which forms rust, Fe2O3.xH2O(s). Oxidation occurs at the site with the greatest concentration of O2. Preventing the Corrosion of Iron Corrosion can be prevented by coating the iron with paint or another metal. Galvanized iron is coated with a thin layer of zinc. Zinc protects the iron since Zn is the anode and Fe the cathode: Zn2+(aq) +2e- Zn(s), Ered = -0.76 V Fe2+(aq) + 2e- Fe(s), Ered = -0.44 V With the above standard reduction potentials, Zn is easier to oxidize than Fe. To protect underground pipelines, a sacrificial anode is added. The water pipe is turned into the cathode and an active metal is used as the anode. Often, Mg is used as the sacrificial anode:

20-13

Chapter 20

Mg2+(aq) +2e- Mg(s), Ered = -2.37 V Fe2+(aq) + 2e- Fe(s), Ered = -0.44 V Also used in water heaters, on gasoline storage tanks, and on ship hulls

20.9 Electrolysis Since chemical oxidation-reduction involves the transfer of electrons from one substance to another, it should be possible to harness the flow of electrons to produce electricity. We do this with voltaic cells. Electricity can also be used to cause non-spontaneous chemical reactions. This process is called electrolysis. Electrolytic Processes with Metals A variety of metals can be prepared by electrolysis, if a cheap source of electricity is available. In addition, some metals* are purified by electrolysis. aluminum cadmium calcium copper* gold* lead* magnesium sodium zinc Purification of Copper Recovered from its ores by chemical reduction. Purified by electrolysis. Recover impurities: Mo (25%) Se (93%) Te (96%) Au (32%) Ag (28%) Production of Aluminum Recovered as Al2O3 nH2O from clays and bauxite. The oxide is difficult to reduce. The metal forms a protective coating of the oxide. Al is very active but can be used in air because of the oxide coating. The oxide coating can be thickened and colored by anodizing. Electrolysis of Al2O3 (melts at 2045oC) dissolved in cryolite, Na3AlF6 (melts at 1000oC). Uses 5% of U.S. electricity production
.

Electrolysis Electrolysis is used for isolating active elements, purifying metals, and electroplating. Pure compounds: H2O, molten salts Use inert electrodes in the liquid and pass electricity through the system The negative electrode (cathode) attracts cations; reduction occurs. The positive electrode (anode) attracts anions; oxidation occurs.

20-14

Chapter 20

Electrolysis of NaCl Cathode: Na+(l) + e- Na(l) Eo = -2.71 V Anode: 2Cl-(l) Cl2(g)+ 2eEo = -1.36 V + 2Na (l) + 2Cl (l) 2Na(l) + Cl2(g) Eo = -4.08 V Must supply at least 4.08 V to electrolyze molten sodium chloride. NaCl melts at 804oC, where Na vaporizes and burns. Lower the temperature by adding CaCl2. (Why does this work?) Na reacts with Cl2, even at room temperature. Commercial operations use a Downs Cell. How does the Downs Cell solve the problem of reaction between Na and Cl2? Electrolysis of H2O Cathode: 2H2O + 2e- H2(g) + 2OHEo = -0.82 V at pH 14, -0.41 V at pH 7, 0.00 V at pH 0 Anode: 2H2O O2(g) + 4H+ + 4eEo = -0.41 V at pH 14, -0.82 V at pH 7, -1.23 V at pH 0 2H2O 2H2(g) + O2(g) Eo = -1.23 V at any pH Must supply at least 1.23 V to electrolyze water. Add an electrolyte to increase electrical conductivity Electrolysis of Aqueous Solutions Products depend on whether it is easier to oxidize or reduce the dissolved ions or water. Consider a solution of VCl3 under standard conditions at pH 7. Cathode: V3+ + e- V2+ Eo = -0.26 V 2H2O + 2e H2 + 2OH Eo = -0.41 V at pH 7 Because of lower voltage, will reduce V3+, not H2O. Anode: 2Cl- Cl2 + 2eEo = -1.36 V 2H2O O2 + 4H+ + 4eEo = -0.82 V at pH 7 Because of lower voltage, will oxidize H2O, not Cl-. Products are V2+ and O2. What are the products of electrolysis of VBr3 at pH 7? Cathode: V3+ + e- V2+ Eo = -0.26 V 2H2O + 2e- H2 + 2OHEo = -0.41 V at pH 7

20-15

Chapter 20

Anode: 2Br- Br2 + 2e2H2O O2 + 4H+ + 4e-

Eo = -1.07 V Eo = -0.82 V at pH 7

What are the products of electrolysis of VI3 at pH 7? Cathode: V3+ + e- V2+ Eo = -0.26 V 2H2O + 2e- H2 + 2OHEo = -0.41 V at pH 7 Anode: 2I- I2 + 2eEo = -0.54 V + 2H2O O2 + 4H + 4e Eo = -0.82 V at pH 7 What are the products of electrolysis of a mixture of CuCl2 and VCl3 at pH 7? Cathode: Eo = -0.26 V V3+ + e- V2+ 2+ Cu + 2e Cu Eo = 0.34 V Eo = -0.41 V at pH 7 2H2O + 2e H2 + 2OH Anode: 2Cl- Cl2 + 2eEo = -1.36 V + 2H2O O2 + 4H + 4e Eo = -0.82 V at pH 7 Faradays Law Faradays Law: the mass of product produced by a given amount of current is proportional to the equivalent weight Equivalent weight: molar mass/no. e- transferred Equivalent weight is the mass of substance oxidized or reduced by 1 mole of electrons We can pass electrons through a series of cells and compare the amount of substance deposited. What is the equivalent weight of ? AgNO3 CuSO4 AuCl3 HCl Moles deposited: Ag+, 1 mole e- 1 mol Ag Cu2+, 1 mole e- 1/2 mol Cu Au3+, 1 mole e- 1/3 mol Au H+, 1 mole e- 1/2 mol H2 F = charge on 1 mol e- = 96500 coul/mol charge = current x time 1 coul = 1 A s moles e- = charge (coul) x 1 mol/96500 coul moles e- = current (A) x time (s) x 1 coul/1 A s x 1 mol/96500 coul If we electrolyze molten NaCl with a current of 5000 A for 30 min (or 1800 s), what mass of Na is produced?

20-16

Chapter 20

Na+ + e- Na moles e- = 5000 A x 1800 s x 1 mol/96500 coul = 93.26 mol moles Na = 93.26 mol e- x 1 mol Na/1 mol e- = 93.26 mol mass Na = 93.26 mol x 22.99 g/mol = 2144 g We can also calculate how much electrical energy it will take for an electrolysis. We will not pursue these calculations. moles e- = current (A) x time (s) x 1 coul/1 A s x 1 mol/96500 coul How long would we have to electrolyze molten NaCl with a current of 3000 A to produce 150 g of Na?

20-17

You might also like