Professional Documents
Culture Documents
Precision Timer
HA17555 Series are ICs designed for accurate time delays or oscillations. It provides both of trigger terminal and reset terminal in order to enable a wide scope of application including Mono Multi Vibrator and Astable Multi Vibrator, and the number of external components is fewer. Further, its compatible with NE555 of singnetics. Communications industry: HA17555PS, HA17555FP General purpose: HA17555, HA17555F
Applications
Delay Time Generator (Mono Multi Vibrator) Pulse Generator (Astable Multi Vibrator) Pulse Width Modulator Pulse Location Modulator Miss Pulse Detector
Features
Mono multi vibrator can be constructed with one resistor and one capacitor. Astable multi vibrator can be constructed with two resistors and one capacitor. Delay time can be established widely from several seconds to several hours. Pulse Duty can be controlled. The maximum value of both sink current and source current is 200mA. Direct connection of output to TTL is possible. Temperature/delay time ratio is 50 ppm/C (typ). Output is normally in the on and off states. Notice: The example of an applied circuit or combination with other equipment shown herein indicates characteristics and performance of a semiconductor -applied products. The company shall assume no responsibility for any problem involving a patent caused when applying the descriptions in the example.
517
HA17555 Series
Pin Arrangement
8 7
Circuit Schematic
5 8
1 1 1 5 7 8 1
1
1 7 11 1
1 18 8 11 5 1 1 1 1 15 1 5 15 17 1
7 1
518
HA17555 Series
Block Diagram
8 5
Unit V mA mA mA mW C C
20 to +75 55 to +125
1. Value under the condition of Ta 25C. In case of more than it, 3.85 mW/C derating shall be performed.
519
HA17555 Series
0.7
aimum Power Dissipation PTma W
a. ounting on 5 of wiring density glassepoy oard of 50 mm 50 mm 1.5 t a 200C/W b. When not mounted. a 20C/W
Test conditions
4.5 0.2
VCC = 5 V, RL = VCC = 15 V, RL =
Ta = 20 to + 75C VCC = 5 to 15 V
2/3 VCC 5.0 1.67 0.5 0.5 0.1 0.1 1.0 0.25
VCC = 15 V VCC = 5 V
520
HA17555 Series
Electrical Characteristics (VCC = 5 to 15 V, Ta = 25C) (cont)
Item Control voltage Output voltage Symbol Min VCL VCL VOL VOL VOL VOL VOL Output voltage VOH VOH VOH Output rise time Output fall time Oscillation pulse width* Notes: 1. 2. 3. 4.
4
Typ 10 3.33 0.1 0.4 2.0 2.5 0.25 12.5 13.3 3.3 100 100
Unit V V V V V V V V V V ns ns ns
Test conditions VCC = 15 V VCC = 5 V VCC = 15 V, Isink = 10 mA VCC = 15 V, Isink = 50 mA VCC = 15 V, Isink = 100 mA VCC = 15 V, Isink = 200 mA VCC = 5 V, Isink = 5 mA VCC = 15 V, Isource = 200 mA VCC = 15 V, Isource = 100 mA VCC = 5 V, Isource = 100 mA No loading No loading
tr tf tw
When output is low (When it is high, ICC is lower by 1 mA typically.) RA, RB = 1 k to 100 k, C = 0.1 F, VCC = 5 V or 15 V. (RA + RB) at VCC = 15 V is determined by the value of Ith. It is 20 M Max. Output pulse width at mono multi circuit. Output high level pulse width at astable circuit.
uiescent Current vs. Supply Voltage 12.0 Vout : Low Level 10.0 2.0
4.0
0.8
2.0
0.4
5 V VCC 15 V
0 5.0
15.0
521
HA17555 Series
Output Voltage (VOL) vs. Sink Current (1) 10 Ta = 75C 25C 20C Output Voltage (VOL) vs. Sink Current (2) 10 VCC = 10 V 3 1.0 0.3 0.1 25C 0.03 0.01 1 3 30 100 300 10 Sink Current Isink (mA) 1,000 1 3 10 30 100 300 Sink Current Isink (mA) 1,000 Ta = 75C 20C
Output Voltage (VOL) vs. Sink Current (3) 10 VCC = 15 V 3 1.015 1.010
1.0 0.3 0.1 0.03 0.01 1 3 10 30 100 300 Sink Current Isink (mA) Ta = 75C 20C 25C
522
HA17555 Series
Relative Delay Time vs. Ambient Temperature 1.015 1.010 200 Minimum Trigger Pulse Width vs. Low Level Trigger Voltage
150
100 Ta = 20C 50 25C 75C 0 0.1 0.2 0.3 0.4 Low Level Trigger Voltage (VCC)
200
Ta = 20C
0.4
523