Professional Documents
Culture Documents
com
www.jwjobs.net
Code No: 55008 Set No. 1 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD III B.Tech. I Sem., II Mid-Term Examinations, November 2011 ADVANCED STRUCTURAL ANALYSIS Objective Exam Name: ______________________________ Hall Ticket No. A I 1. Choose the correct alternative: In substitution frame method which method is employed ? a) slope deflection b) Kanis method c) Stiffness method Substitute frame method is a) Static method b) Kinamatic method
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 10.
2.
c) Iteration Method
3.
In analysis of structures for horizontal loads the loads are transferred to a) Beams b) Joints c) Columns d) Slabs The approximate methods of analysis of frames subjected to a) Vertical Loads b) Horizontal Loads c) Inclined Loads The approximate method of analysis is more suited for a) High Rise buildings b) Low Rise buildings c) Medium Rise buildings d) Single storey buildings
4.
5.
6.
Under the action of horizontal forces in portal method the point of contra flexure for columns and beams occur [ ] a) at the ends b) at 1/3 points c) at middle d) at 1/4 points Frames having several bays, what is the relation between horizontal shear taken by interior column to exterior column in portal method [ ] a) three times b) 0.75 times c) 0.9 times d) two times In frames assume that the bind to blow from left to right, in leeward columns what is the nature of axial force. [ ] a) Compression b) Tension c) Flexure d) Torsion The basic principle of FEM is to discretise a) 1D element b) 2D element c) 3D element In dynamic equation every parameter is depend on a) Velocity b) Acceleration c) Time [ d) All the above [ d) Earthquake Cont2 ] ]
7.
8.
T N
W U
R O
D L
[ ] d) Torsional Loads [ ]
9.
10.
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
:2:
Set No. 1
In substitute frame method. _____________ is the load condition for max +ve. B.M is span BC for a continuous beam of ABCEDF (5 bays). In substitute frame method ______________ is the load condition for support B.M. Draw the column B.M. diagram in columns of the frame due to horizontal forces.
12. 13.
14.
Assume that the sway in frames is towards right, for equilibrium ______________ is the nature of moment required In frames top floor columns are subjected to horizontal load of 4w, _____________ is the shear carried by all the columns in that floor _________________ is the force displacement relation FEM. CST element is meant by ______________ .
15.
In plane stress in ________________ direction stress are zero. _____________ is meant by Eigen value. Write dynamic equilibrium equation in free vibrations ________________
T N
W U
-oOo-
R O
D L
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 55008 Set No. 2 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD III B.Tech. I Sem., II Mid-Term Examinations, November 2011 ADVANCED STRUCTURAL ANALYSIS Objective Exam Name: ______________________________ Hall Ticket No. A I 1. Choose the correct alternative: The approximate methods of analysis of frames subjected to a) Vertical Loads b) Horizontal Loads c) Inclined Loads The approximate method of analysis is more suited for a) High Rise buildings b) Low Rise buildings c) Medium Rise buildings d) Single storey buildings
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 10.
[ ] d) Torsional Loads [ ]
2.
3.
Under the action of horizontal forces in portal method the point of contra flexure for columns and beams occur [ ] a) at the ends b) at 1/3 points c) at middle d) at 1/4 points Frames having several bays, what is the relation between horizontal shear taken by interior column to exterior column in portal method [ ] a) three times b) 0.75 times c) 0.9 times d) two times In frames assume that the bind to blow from left to right, in leeward columns what is the nature of axial force. [ ] a) Compression b) Tension c) Flexure d) Torsion The basic principle of FEM is to discretise a) 1D element b) 2D element c) 3D element In dynamic equation every parameter is depend on a) Velocity b) Acceleration c) Time In substitution frame method which method is employed ? a) slope deflection b) Kanis method c) Stiffness method Substitute frame method is a) Static method b) Kinamatic method
4.
5.
6.
7.
8.
T N
W U
R O
D L
9.
c) Iteration Method
10.
In analysis of structures for horizontal loads the loads are transferred to a) Beams b) Joints c) Columns d) Slabs
Cont2
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
:2:
Set No. 2
Assume that the sway in frames is towards right, for equilibrium ______________ is the nature of moment required In frames top floor columns are subjected to horizontal load of 4w, _____________ is the shear carried by all the columns in that floor _________________ is the force displacement relation FEM. CST element is meant by ______________ . In plane stress in ________________ direction stress are zero. _____________ is meant by Eigen value.
12.
In substitute frame method. _____________ is the load condition for max +ve. B.M is span BC for a continuous beam of ABCEDF (5 bays). In substitute frame method ______________ is the load condition for support B.M. Draw the column B.M. diagram in columns of the frame due to horizontal forces.
19. 20.
T N
W U
-oOo-
R O
D L
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 55008 Set No. 3 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD III B.Tech. I Sem., II Mid-Term Examinations, November 2011 ADVANCED STRUCTURAL ANALYSIS Objective Exam Name: ______________________________ Hall Ticket No. A I 1. Choose the correct alternative:
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 10.
Under the action of horizontal forces in portal method the point of contra flexure for columns and beams occur [ ] a) at the ends b) at 1/3 points c) at middle d) at 1/4 points Frames having several bays, what is the relation between horizontal shear taken by interior column to exterior column in portal method [ ] a) three times b) 0.75 times c) 0.9 times d) two times In frames assume that the bind to blow from left to right, in leeward columns what is the nature of axial force. [ ] a) Compression b) Tension c) Flexure d) Torsion The basic principle of FEM is to discretise a) 1D element b) 2D element c) 3D element
2.
3.
4.
5.
6.
In substitution frame method which method is employed ? a) slope deflection b) Kanis method c) Stiffness method Substitute frame method is a) Static method b) Kinamatic method
7.
8.
In analysis of structures for horizontal loads the loads are transferred to a) Beams b) Joints c) Columns d) Slabs The approximate methods of analysis of frames subjected to a) Vertical Loads b) Horizontal Loads c) Inclined Loads The approximate method of analysis is more suited for a) High Rise buildings b) Low Rise buildings c) Medium Rise buildings d) Single storey buildings
T N
W U
R O
D L
c) Iteration Method
9.
[ ] d) Torsional Loads [ ]
10.
Cont2
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 55008 II 11. 12. 13. 14. 15. 16. Fill in the blanks
:2:
Set No. 3
_________________ is the force displacement relation FEM. CST element is meant by ______________ . In plane stress in ________________ direction stress are zero. _____________ is meant by Eigen value. Write dynamic equilibrium equation in free vibrations ________________ In substitute frame method. _____________ is the load condition for max +ve. B.M is span BC for a continuous beam of ABCEDF (5 bays). In substitute frame method ______________ is the load condition for support B.M. Draw the column B.M. diagram in columns of the frame due to horizontal forces.
17. 18.
19.
Assume that the sway in frames is towards right, for equilibrium ______________ is the nature of moment required In frames top floor columns are subjected to horizontal load of 4w, _____________ is the shear carried by all the columns in that floor
20.
T N
W U
-oOo-
R O
D L
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 55008 Set No. 4 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD III B.Tech. I Sem., II Mid-Term Examinations, November 2011 ADVANCED STRUCTURAL ANALYSIS Objective Exam Name: ______________________________ Hall Ticket No. A I 1. Choose the correct alternative:
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 10.
In frames assume that the bind to blow from left to right, in leeward columns what is the nature of axial force. [ ] a) Compression b) Tension c) Flexure d) Torsion The basic principle of FEM is to discretise a) 1D element b) 2D element c) 3D element In dynamic equation every parameter is depend on a) Velocity b) Acceleration c) Time [ d) All the above ]
2.
3.
4.
In substitution frame method which method is employed ? a) slope deflection b) Kanis method c) Stiffness method Substitute frame method is a) Static method b) Kinamatic method
5.
6.
In analysis of structures for horizontal loads the loads are transferred to a) Beams b) Joints c) Columns d) Slabs The approximate methods of analysis of frames subjected to a) Vertical Loads b) Horizontal Loads c) Inclined Loads The approximate method of analysis is more suited for a) High Rise buildings b) Low Rise buildings c) Medium Rise buildings d) Single storey buildings
7.
8.
T N
W U
R O
D L
d) Earthquake
c) Iteration Method
[ ] d) Torsional Loads [ ]
9.
Under the action of horizontal forces in portal method the point of contra flexure for columns and beams occur [ ] a) at the ends b) at 1/3 points c) at middle d) at 1/4 points Frames having several bays, what is the relation between horizontal shear taken by interior column to exterior column in portal method [ ] a) three times b) 0.75 times c) 0.9 times d) two times
10.
Cont2
www.jntuworld.com
www.jntuworld.com
www.jwjobs.net
Code No: 55008 II 11. 12. 13. 14. Fill in the blanks
:2:
Set No. 4
In plane stress in ________________ direction stress are zero. _____________ is meant by Eigen value. Write dynamic equilibrium equation in free vibrations ________________ In substitute frame method. _____________ is the load condition for max +ve. B.M is span BC for a continuous beam of ABCEDF (5 bays). In substitute frame method ______________ is the load condition for support B.M. Draw the column B.M. diagram in columns of the frame due to horizontal forces.
15. 16.
17.
Assume that the sway in frames is towards right, for equilibrium ______________ is the nature of moment required In frames top floor columns are subjected to horizontal load of 4w, _____________ is the shear carried by all the columns in that floor _________________ is the force displacement relation FEM. CST element is meant by ______________ .
18.
19. 20.
T N
W U
-oOo-
R O
D L
www.jntuworld.com