Professional Documents
Culture Documents
SERVICE
TFT-LCD TV/MONITOR
Manual
CONTENTS
1. Precautions 2. Product Specifications 3. Disassembly & Reassembly 4. Alignment & Adjustments 5. Troubleshooting 6. Exploded View & Parts List 7. Parts List 8. Block Diagram 9. Wiring Diagram 10. PCB Layout 11. Schematic Diagrams 12. Panel Description
This Service Manual is a property of Samsung Electronics Co., Ltd. Any unauthorized use of Manual can be punished under applicable International and/or domestic law.
Samsung Electronics Co.,Ltd. 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Gyeonggi-Do, Korea, 443-742 Printed in Korea P/N : BN82-00128C-00 URL : http://itself.sec.samsung.co.kr/
1 Precautions
1 Precautions
Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock.
2.
3.
1-1
1 Precautions
4.
Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, input terminals and earphone jacks). Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON. Connect an insulation resistance meter (500 V) to the blades of the AC plug. The insulation resistance between each blade of the AC plug and accessible conductive parts (see above) should be greater than 1 megohm.
5.
2.
6.
3.
Always connect a test instrument s ground lead to the instrument chassis ground before connecting the positive lead; always remove the instrument s ground lead last.
1.
Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. To avoid a shock hazard, be sure to remove the wrist strap before applying power to the monitor. After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent accumulation of an electrostatic charge. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESDs. Use only a grounded-tip soldering iron to solder or desolder ESDs. Use only an anti-static solder removal device. Some solder removal devices not classified as anti-static can generate electrical charges sufficient to damage ESDs.
6.
Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive materials. Immediately before removing the protective material from the leads of a replacement ESD, touch the protective material to the chassis or circuit assembly into which the device will be installed.
7.
2.
3. 4. 5.
Caution: Be sure no power is applied to the chassis or circuit and observe all other safety precautions.
8. Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, or lifting your foot from a carpeted floor can generate enough static electricity to damage an ESD.
1-2
2 Product Specifications
2 Product Specifications
2-1 Specifications
Item Description
2-1
2 Product Specifications
2-2-1 Component 1, 2
Y RCA Green GND Pb (Cb) RCA Blue GND Pr (Cr) RCA Red GND Audio L RCA White GND Audio R RCA Red GND
2-2-2 S-Video
Pin 1 2 3 4 5 Separate GND Y C GND GND
2-2-3 A/V
RCA Yellow CVBS Audio L RCA White GND Audio R RCA Red GND
2-2
2 Product Specifications
2-3
2 Product Specifications
2-4
2 Product Specifications
2-5
2 Product Specifications
2-6
3-1 Disassembly
Cautions: 1. Disconnect the monitor from the power source before disassembly.
1. Remove 10 screws from rear cover. Remove 4 screws from grip on the stand.
3-1
3. Remove 3screws from the Jack cover and remove 10screws from the shield cover.
5. Remove 3screws and disconnect cable and lift up the shield. (Add to step 5 that the fan connector must be removed.) 3-2
8. Remove 6screws from the Stand BRKT and lift up the Stand BRKT.
3-3
10. Remove 10screws from the BRKT and lift up the BRKT.
3-4
3-3 Reassembly
Reassembly procedures are in the reverse order of dissasembly procedures.
3-5
Memo
3-6
4-1
4-2
32
V-Peaking-TH3
4-3
4-4
4-5
4-6
V-PEAKING-TH3
4-7
4-8
- Equipment : CS-1000 - Pattern: Master MSPG925 #16 "ABL Pattern" as standard - Use other equipment only after comparing the result with that of the Master equipment.
20mm 20mm
- Set Aging time : 60min - Calibration and Manual setting for WB adjustment. HDMI: No Calibration Manual adjustment at #16 pattern (1080i) Manual adjustment at #16 pattern (720p) Manual adjustment at #16 pattern (NTSC) No Manual adjustment (1024x768@60Hz)
COMP: Calibration at #24 Chessboard Pattern CVBS: Calibration at #24 Chessboard Pattern PC : Calibration at #24 Chessboard Pattern
Component (720p)
HDMI (1080i)
4-9
-1. Don' t turn off during downloading. 2. sdn.exe, download file and Batch file should be in the same directory. 3. During Downloading, Hyper Terminal should be turned off.(2) Enter a new name. (3) Select a modem port.(com 1 and direct connection.) (4) Set the bit/second to 115200. (5) Set the data bit to 8. 4-10
4 Alignments and Adjustments (6) No parity bit. (7) Set stop bit to 1. (8) No flow control. (9) Save in memory. (10) At this point, the new hyper terminal is ready.
4-11
Memo
4-12
5 Troubleshooting
5 Troubleshooting
5-1 No Power
LAMP Off, power indicator LED redcolor? Yes Does proper Stand-By DC A6.2V appear at C1103? Yes Doesproper MainDC B12V, B5V, B12VS appear at C1004, C1018, C1023? Yes DoesproperInverterDC 24V appearatCNI801, CNI802 in BN94-00622E? Yes DoesproperPOD DC S_5V, S_6.5V,S_12V appear at C8020_USA, C8043_USA,C8030_USA? Yes Check C121(3.3V),C119(5V), C107(3.3V),C126(1.8V), C114(1.2V) in POD NIM Board.(BN95-00370A) Yes Does proper DC A5V, A3.3V, A1.8V appear at C1107, C1115, C1105 ? Yes Does proper DC B9V, VCC5P, B3.3V_1, B3.3V_2, B5V_BA7657, B5V_VCC appear at C1007, C1060, C1069, C1024, C1027? Yes DoesproperDC 1.8V appearat C5117,C5027,C5052,C9010 ? Yes DoesproperDC 1.8V,2.5V,3.3V appearatC7032,C5043,IC8008? Yes A powerissupplied to set? No
s
Checkaconnectionpowercable. Stand-By POWER : BN39-00607A MainPOWER : BN39-00028H POD POWER : MD39-00074B Change the Main Power Ass'y BN94-00622E
Ye
No
No
No
No
No
No
No
Check IC1001, IC1006, IC1007, IC1009, IC1002, IC1003 Change the Main Ass'y BN94-00629F
No
CheckIC5001, IC5002, IC5004, IC9001 Change the Main Ass'y BN94-00629F Check IC5001, IC5002, IC5004, IC8008 Change the Main Ass'y BN94-00629F Check a other function (No picture part) Replacea LCD Panel BN07-00186A
No
No
5-1
5 Troubleshooting
5-2
5 Troubleshooting
WAVEFORMS
5-3
5 Troubleshooting
No
5-4
5 Troubleshooting
WAVEFORMS
5-5
5 Troubleshooting
5-6
5 Troubleshooting
WAVEFORMS
5-7
5 Troubleshooting
No
InputaRF signal. Check a connected cable.(AA3900039A) Check CN7002_NEW. Checks plitter cable connection. (main &OOB) Change a main PCB ass'y (BN94-00629F)or splitter cable.(BN39-00602A) Check TU100 of POD NIM ass'y (BN95-00370A) Change a POD NIM ass'y (BN95-00370A)
No
No
Yes
Does the digital data appear at output of RA8006_USA, RA8007_USA(TS data) and R8024_USA, R8023_USA(Clk,VLD)?
No
Yes
Does the digital data appear at output of RA7003-4, RA7006-9 (R,G,B) andR7007, R7009, R7010(CLK,V,H)?
No
Yes Doesthe digital data appear at output of R5001-R5010 ? Yes Doesthe digitaldata appear at output of FT1001-FT1005 ? Yes Check a LVDS cable ? (BN39-00588C) Replace a LCD panel? (BN07-00186A) 5-8 No No CheckIC9003 Change a main PCB ass'y BN94-00629F No Check IC5007 Change a main PCB ass'y BN94-00629F
5 Troubleshooting
WAVEFORMS
5-9
5 Troubleshooting
No
Does the signal appear at #242 of IC5007 ? Yes Does the digital data appear at output of R5001-R5010 ? Yes Does the digital data appear at output of FT1001-FT1005 ? Yes Check a LVDS cable ? (BN39-00588C) Replace a LCD panel? (BN07-00186A)
No
No
No
No
5-10
5 Troubleshooting
WAVEFORMS
5-11
5 Troubleshooting
No
Does the signal appear at #244, 231 of IC5007 ? Yes Does the digital data appear at output of R5001-R5010 ? Yes Does the digital data appear at output of FT1001-FT1005 ? Yes Check a LVDS cable ? (BN39-00588C) Replace a LCD panel? (BN07-00186A)
No
No
No
No
5-12
5 Troubleshooting
WAVEFORMS
5-13
5 Troubleshooting
No
Does the signal appear at #19, 15, 21(Y,Pb,Pr)of IC1005 ? Yes Does the digital data appear at outputof R5001-R5010 ? Yes Does the digital data appear at output of FT1001-FT1005 ? Yes Check a LVDS cable ? (BN39-00588C) Replace a LCD panel? (BN07-00186A)
No
No
No
No
5-14
5 Troubleshooting
WAVEFORMS
5-15
5 Troubleshooting
5-8 No Sound
Picture is display, no sound.
Yes Check a sound source and check the connection of sound cable ? Yes Does the signal appear at #56, 57(PC-L/R), #53, 54(HDMI-L/R), #50, 51(Video,Svideo,Co mponent-L/R)of IC2004? Yes Does the digital data appear at #22,20,19 (data, LRclk, Sclk)of IC2004?(DTV/HDMI) Yes Does the digital data appear at #4, 6, 7 (Sclk,data-out,data-in) of IC2004 ? Yes Check IC2004 Change a main PCB ass'y BN94-00629F No CheckIC2004 Change a main PCB ass'y. BN94-00629F No Check IC2009 Change a main PCB ass'y. BN94-00629F Check JA4002, JA4003, IC2002 Change a main PCB ass'y. BN94-00629F
No
No
No
Yes Replace the speaker ass'y ? BN96-01860A (Left) BN96-01859A (Right) No Please, Call to Samsung Co. LTD.
5-16
5 Troubleshooting
WAVEFORMS
5-17
5 Troubleshooting
Memo
5-18
6-1
-PARTS LIST
6-2
7-1
7-2
8 Block Diagrams
8 Block Diagram
h This Document can not be used without Samsung's authorization.
8-1
8 Block Diagrams
Memo
8-2
10 PCB Layout
X Y
10-1
10 PCB Layout
Loc. No. Description DIODE
D1001 D1003 D1004 D1005 D1006 D1007 D1008 D1009 D1010 D1011 D1012 D1013 D1014 D1015 D1016 D1017 D1018 D1019 D1020 D1021 D1022 D1023 D1024 D1025 D1026 D1027 D1028 D2001 D2002 D2003 D2004 D2005 D2006 D2007 D2008 D3001 D3002 D3003 D3004 D3005 D3006 D3007 D3008 DIODE-SWITCHING DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-RECTIFIER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-RECTIFIER DIODE-RECTIFIER DIODE-RECTIFIER DIODE-ZENER DIODE-SWITCHING DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-SWITCHING DIODE-ARRAY DIODE-ARRAY DIODE-ARRAY DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER 26.6 137.9 152.7 145.3 160.1 174.9 167.7 179.4 183.6 137.7 152.6 145.1 160.0 174.8 167.5 118.4 129.6 103.2 102.2 49.0 118.3 129.4 101.5 102.2 27.0 19.0 38.3 72.8 36.1 36.2 50.8 39.1 30.8 51.0 39.2 168.7 213.4 192.8 192.8 226.9 230.5 229.7 222.6 175.8 44.0 44.3 44.0 44.2 44.1 44.2 44.1 44.0 44.2 44.4 44.2 44.3 44.2 44.3 44.1 43.6 11.8 21.7 204.3 44.2 44.0 14.0 21.7 147.1 198.8 230.6 104.1 112.3 108.4 33.0 31.0 31.7 33.6 26.7 137.8 161.3 166.6 162.5 44.0 20.5 14.9 44.1
Loc. No.
D3009 D3010 D3011 D3012 D3013 D3014 D3015 D3016 D3017 D3018 D3019 D3020 D3021 D3022 D3023 D3024 D3025 D3026 D3027 D3028 D4001 D4002 D4003 D4004 D4005 D4006 D4007 D4008 D4009 D4010 D4011 D4012 D4013 D4014 D4015 D4016 D4017 D4018 D4019 D4020 D4021 D4022 D4023 D4024
Description
DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-SWITCHING DIODE-SWITCHING DIODE-SWITCHING DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-SWITCHING DIODE-SWITCHING
X
195.4 206.1 210.3 230.7 230.9 222.5 195.1 205.9 180.9 181.0 181.0 181.2 80.7 76.9 57.9 68.3 58.1 68.4 94.7 90.7 62.8 58.9 54.8 81.4 70.9 75.0 77.6 46.1 18.6 20.2 18.3 20.2 96.1 103.9 95.9 103.7 147.1 134.7 139.4 135.7 143.1 170.9 147.6 150.1
Y
44.6 44.6 44.5 20.6 15.1 44.3 44.7 44.8 30.5 13.7 26.3 9.5 31.9 31.8 33.2 33.2 33.6 33.5 31.7 31.7 54.0 54.0 54.0 54.8 54.8 59.0 54.8 50.9 48.5 41.9 48.7 44.3 58.7 56.4 62.7 60.7 70.4 79.9 59.6 59.6 59.6 77.6 67.0 70.8
Loc. No.
D4025 D4026 D4027 D4028 D4029 D4030 D4031 D4032 D4033 D5001 D7001_KOR D8001_USA
Description
DIODE-SWITCHING DIODE-SWITCHING DIODE-SWITCHING DIODE-SWITCHING DIODE-SWITCHING DIODE-SWITCHING DIODE-ZENER DIODE-ZENER DIODE-ZENER DIODE-RECTIFIER DIODE-RECTIFIER DIODE-SWITCHING
X
151.9 154.4 156.2 158.7 160.5 163.0 143.3 166.9 136.1 50.7 206.8 219.2
Y
67.0 70.8 67.0 70.8 67.0 70.8 61.7 66.0 84.3 163.3 303.4 189.8
Loc. No.
IC3006 IC3007 IC3008 IC3009 IC3010 IC4002 IC4003 IC4004 IC4006 IC4007 IC5001 IC5002 IC5003 IC5004
Description
IC-EEPROM IC-RESET IC-DRIVER/RECEIVER IC-TTL IC-CMOS LOGIC IC-EEPROM IC-CMOS LOGIC IC-A/D CONVERTER IC-EEPROM IC-RECEIVER IC-SWITCH VOL. REG. IC-POSI.FIXED REG. IC-POSI.FIXED REG. IC-POSI.FIXED REG. IC-DRAM IC-VIDEO PROCESS IC-CMOS LOGIC IC-CMOS LOGIC IC-VOL. DETECTOR IC-CMOS LOGIC IC-VOL. DETECTOR IC-EEPROM IC-MICROPROCESSOR IC-CMOS LOGIC IC-CMOS LOGIC IC-FLASH MEMORY IC-DRAM IC-DRAM IC-CMOS LOGIC IC-CMOS LOGIC IC-DRAM IC-DRAM IC-CMOS LOGIC IC-POSI.FIXED REG. IC-CLOCK GENERATOR IC-POSI.FIXED REG. IC-SWITCH VOL. REG. IC-CMOS LOGIC IC-CMOS LOGIC IC-CMOS LOGIC IC-CMOS LOGIC IC-CMOS LOGIC IC-CMOS LOGIC IC-POSI.FIXED REG.
X
189.3 189.9 83.7 78.8 83.9 78.7 70.9 120.1 136.4 153.6 60.7 143.0 88.1 158.7 96.1 111.0 109.0 111.7 112.6 111.6 111.7 140.7 141.6 131.8 121.5 174.1 171.8 151.3 151.5 74.0 156.0 156.0 72.5 96.8 98.1 223.2 197.6 193.9 151.9 133.3 114.4 142.6 133.2 182.6
Y
143.4 161.2 80.1 46.2 58.2 65.5 57.8 95.9 69.9 90.1 164.8 130.8 89.4 160.3 113.9 147.6 152.4 212.5 225.0 196.0 232.3 206.9 216.9 193.3 193.3 196.6 215.7 191.8 209.2 159.8 282.9 256.2 173.6 304.0 244.9 300.8 297.1 247.7 301.2 299.2 300.4 299.2 299.2 292.9
Loc. No.
IC8007_USA IC8008_USA IC8010_USA IC8011_USA IC8012_USA IC8013_USA IC8014_USA IC9001 IC9002 IC9003 IC9012
Description
IC-CMOS LOGIC IC-POSI.FIXED REG. IC-VOL. DETECTOR IC-BICMOS LOGIC IC MICOM IC-VOL. DETECTOR IC-POSI.ADJUST REG. IC-POSI.FIXED REG. IC-OP AMP IC-VIDEO PROCESS IC-DECODER
X
192.8 169.3 206.7 205.4 212.1 220.6 213.1 76.4 61.2 93.2 126.0
Y
196.1 299.9 275.9 225.4 199.7 188.1 304.7 232.6 203.7 198.8 269.4
IC
IC8009_USA IC1001 IC1002 IC1003 IC1004 IC1005 IC1006 IC1007 IC1009 IC1012 IC1013 IC2001 IC2002 IC2003 IC2004 IC2005 IC2006 IC2007 IC2008 IC2009 IC2010 IC2011 IC2012 IC2013 IC2014 IC2015 IC3002 IC3003 IC3004 IC3005 IC HYBRID IC-POSI.FIXED REG. IC-POSI.FIXED REG. IC-DC/DC CONVERTER IC-SWITCH REG. IC-VIDEO SWITCH FET-SILICON IC-SWITCH VOL. REG. IC-SWITCH VOL. REG. IC-POSI.FIXED REG. IC-MULTI REG. IC-AUDIO AMP IC-ANALOG MULTIPLEX IC-A/D CONVERTER IC-SOUND PROCESSOR IC-AUDIO AMP IC-CMOS LOGIC IC-TTL IC-TTL IC-CMOS LOGIC IC-CMOS LOGIC IC-SRAM IC-TTL IC-TTL IC-TTL IC-TTL IC-VOL. DETECTOR IC-MICROCONTROLLER IC-RESET IC MICOM 208.1 41.0 27.8 48.5 27.7 118.5 39.6 20.7 34.8 10.5 180.6 36.3 40.5 71.4 58.1 44.0 24.5 15.0 24.6 65.7 12.4 18.5 23.4 13.2 39.9 30.9 167.3 205.0 219.8 164.8 250.6 170.7 183.7 210.7 162.5 76.5 221.9 207.8 239.8 34.1 162.3 78.8 146.6 83.9 122.4 111.2 140.4 127.1 126.9 122.9 140.4 123.6 107.5 107.3 124.0 120.9 128.8 149.9 154.6 147.2
TRANSISTOR
Q1002 Q1004 Q1006 Q1007_DEL Q2001 Q2002 Q2003 Q2004 Q2005 Q2006 Q2007 Q2008 Q2009 Q2010 Q3002 Q3003 Q3005 Q4002 Q4003 Q6001 Q6002 Q6003 Q6004 Q7001 Q7002 Q7003 TR-SMALL SIGNAL TR-SMALL SIGNAL FET-SILICON TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL FET-SILICON TR-SMALL SIGNAL FET-SILICON FET-SILICON FET-SILICON FET-SILICON FET-SILICON FET-SILICON TR-SMALL SIGNAL TR-SMALL SIGNAL TR-SMALL SIGNAL 33.5 50.3 89.3 23.6 30.8 30.6 41.9 45.9 73.9 41.0 81.7 59.9 52.3 47.8 219.5 208.1 196.7 142.4 138.7 138.5 142.2 163.0 146.5 219.3 205.6 223.2 216.4 11.6 248.8 242.3 70.8 93.9 70.3 70.3 10.7 109.7 10.5 116.1 97.1 98.7 150.5 134.5 158.1 80.1 80.1 218.6 218.6 202.2 217.0 235.7 112.6 103.2
IC5006 IC5007 IC5008 IC6001 IC6002_DEL IC6003 IC6004 IC6005 IC6006 IC6007 IC6008 IC6009_OP IC6010 IC6011 IC6012 IC7001 IC7004 IC7005 IC7006 IC7007 IC7009 IC7010_KOR IC7011_KOR IC7012_KOR IC8001_USA IC8002_USA IC8003_USA IC8004_USA IC8005_USA IC8006_USA
10-2
9 Wiring Diagrams
9 Wiring Diagram
9-1
9 Wiring Diagrams
Memo
9-2
11 Schematic Diagrams
11 Schematic Diagrams
-This Document can not be used without Samsung's authorization.
11-1
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-2
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-3
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-4
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-5
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-6
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-7
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-8
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-9
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-10
11 Schematic Diagrams h This Document can not be used without Samsungs authorization.
11-11
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-12
11 Schematic Diagrams -This Document can not be used without Samsung's authorization.
11-13
11 Schematic Diagrams
Memo
11-14