Professional Documents
Culture Documents
PRODUCT SPECIFICATION
CONFIGURATION HIGHLIGHTS Speed Control: Solid State 275 amp controller. Potentiometer throttle sensor l Four, Six Volt Deep Cycle l Dash mounted direction selector switch (Forward-Neutral-Reverse) Battery Charger: 24 Volt On-Board. Fully line compensating. Underwriters Laboratories (U.L.) Listed, (C.S.A. Certified) l Input: 110 120 Volt, 60 Hz, 8.5 amp l Output: 24 Volt at 25 amps. DC Motor: Drive Train: Electrical System: Transaxle: Brakes: Convenience: Towing Capacity: 24 Volt DC series wound, brazed armature, solid copper armature.1.5 hp (1.1 kW) @ 2800 rpm, 4.3 hp (3.2 kW) @ 1200 rpm Direct motor shaft connected to transaxle pinion shaft 24 Volt DC, four, 6 volt deep cycle batteries (115 minute minimum, 225 amp-hour @ 20 hr. discharge rate) Differential with helical gears Dual rear wheel mechanical drum brakes. Automatic park brake 4 & 6 rung ladders available Normal Draw Bar Pull 100 lb (45 kg). Maximum Draw Bar Pull (at stall) 840 lb (380 kg)
PRODUCT OVERVIEW
Dimensions Overall Length Overall Width Overall Height (No Ladder) Overall Height (4 Step Ladder) Overall Height (6 Step Ladder) Wheel Base Front Wheel Track Rear Wheel Track Gnd Clearance @ Differential Cargo Deck Width Cargo Deck Length Cargo Deck Material Vehicle Power Power Source Motor Type Horsepower (kW) Electrical System Batteries (Qty, Type) Key or Pedal Start Battery Charger Speed Controller Drive Train Transaxle Gear Selection Rear Axle Ratio Performance Capacity Dry Weight Curb Weight Cargo Deck Load Capacity Vehicle load capacity Outside Clearance Circle Intersecting Aisle Clearance Speed (Level Ground) Towing Capacity (Draw Bar) Steering & Suspension Steering Front Suspension Rear Suspension Service Brake Parking Brake Front Tire Rear Tires Body & Chassis Frame & Body Body & Finish Standard Color
84.0 in (213 cm) 29.5 in (75 cm) 48.0 in (122 cm) 78.0 in (198 cm) 97.0 in (246 cm) 48.0 in (122 cm) N/A 24.75 in (63 cm) 4.0 in (10 cm) 29.0 in (74 cm) 48.0 in (122 cm) Plywood 24 Volts DC Series Wound 1.5 hp (1.1 kW) @ 2800 rpm 24 Volt Four, 6 Volt Deep Cycle Pedal Start 24 V, 120 VAC On-Board, UL & CSA Solid State 275 Amp Rated Motor Shaft Direct Drive Differential with helical gears Dash Mounted Forward-Neutral-Reverse 14.78:1
1 Person (Standing) 490.0 lb (225 kg) (Without Batteries) 740.0 lb (335 kg) 750.0 lb (340 kg) 1000.0 lb (450 kg) 10.5 ft (3.2 m) 56.0 in (142 cm) 9 mph max (14 kph max) 100 lb (45 kg) Normal. 840 lb (380 kg) at stall Direct Chain & Linkage Solid Solid Rear Wheel Mechanical Drum Automatic 4.80 x 8 (Load Range B) 4.80 x 8 (Load Range B) Welded steel with DuraShield powder coat Diamond plate pattern. Polyester primer/Acrylic Yellow
Material
Handling
and
Fleet Management
Specialist
contact@forkliftsystems.com www.forkliftsystems.com
Contact Info
MAILING ADDRESS
Forklift Systems Incorporated 884 Elm Hill Pike Nashville, TN 37210
CONTACT INFO
Phone: 615-255-6321 Toll Free: 800-752-1882 Email: contact@forkliftsystems. com Web: www.forkliftsystems.com
SOCIAL MEDIA
Click Map to Open Google Map of Location Tennessee Main Office: 884 Elm Hill Pike, Nashville,TN 37210 (615) 255-6321
Click Map to Open Google Map of Location Alabama Main Office: 132 West Park Drive, Birmingham, AL 35211 (205) 945-1112
Other Products
Electric Pallet Trucks Large Capacity Forklifts I.C. & Electric Forklifts
Personnel Shuttles
Burden Carriers
contact@forkliftsystems.com
www.forkliftsystems.com