Professional Documents
Culture Documents
FEATURES
FEATURE: -Locking bar engages regardless of adjustment BENEFIT: -Fifth Wheel always locks
FEATURE: -Safe & Simple with only 4 moving parts BENEFIT: -Reliable Coupling
FEATURE: -Integral 2nd & 3rd lock BENEFIT: -Keeps lock secure
FEATURE: -High coupling lugs BENEFIT: -Decrease potential for improper coupling
FEATURE: -Non-Metallic cushion ring BENEFIT: -Cushions kingpin impact -Aids lubrication -Topplate fully rebuildable
FEATURE: -Simple adjustment with infinite positions BENEFIT: -Provides a snug fit to kingpin reducing impact and wear
FEATURE: -Locks replaceable on tractor in 30min or less at 1/2 the cost. BENEFIT: -Reduced vehicle down time -Reduce rebuild cost
RevJ
TABLE OF CONTENTS
Pages TOPPLATE ASSEMBLIES TOPPLATE PARTS Standard Model JSK 37U Low Lube Model JSK 37UW Air Release Components Replacement Model JSK 37H Replacement Model JSK 37F TOPPLATE OPTIONS SLIDING FIFTH WHEEL ASSEMBLIES Outboard Model Inboard Model STATIONARY FIFTH WHEEL ASSEMBLIES Outboard Flat Plate Mount Outboard Plate Mount Inboard Angle Mount Bracket for Angle Mount Stationary Mounting Brackets NO-TILT CONVERTIBLE FIFTH WHEEL ACCESSORIES Replacement Kits Air Line Kits Air Cylinders MOUNTING ACCESSORIES Hardware Kits Sliding Outboard Mounting Angle Stationary Inboard Mounting Angle Stationary Outboard Mounting Angle Corrugated Mounting Plate SERVICE TOOLS 1-2 3-7 3 4 5 6 7 8 9-20 9-14 15-20 21-29 21-22 23-24 25-26 27-28 29 30 31-34 31 32-33 34 35-39 35 36 37 38 39 40
RevJ
TOPPLATE ASSEMBLIES
TOPPLATE*
Fifth Wheel Product Line Prefix JSK Topplate Style 37U Topplate Lube Type __ Topplate Release Type __
Standard Lube Surface S With Low Lube Plates W Auto Lube (4 holes) A
DIMENSIONAL INFORMATION
36.63 24.6
19.7
.5
5.0
Unlocked
Locked
*Pins, bushings & collars not included when ordering 37U topplate only.
Page 1
RevJ
TOPPLATES
TOPPLATE ASSEMBLIES
JSK 37U
Topplate Lube Type Topplate Release Type Weight Found on page #
Model Number
Left Hand Release Standard Air Release** Left Hand Retractable Left Hand Release With Low Lube Plates Air Release** Left Hand Retractable Left Hand Release Auto Lube (4 holes) Air Release** Left Hand Retractable
240 lbs. 246 lbs. 242 lbs. 242 lbs. 248 lbs. 244 lbs. 240 lbs. 246 lbs. 242 lbs.
JSK 37USL JSK 37USA JSK 37USB JSK 37UWL JSK 37UWA JSK 37UWB JSK 37UAL JSK 37UAA JSK 37UAB
Page 3 Page 5 Page 3 Page 4 Page 4 & 5 Page 4 Page 3 Page 5 Page 3
** Jost International recommends that our manifold assembly kit be installed with the Air Release because it contains important safety interlock components (see pg. 33).
JSK 37H
FIELD REPLACEMENT FOR HOLLAND TOPPLATES*
Weight
Model Number
Found on page #
Left Hand Release Air Release** Left Hand Release Air Release**
* The
JSK 37F
FIELD REPLACEMENT TOPPLATE
Weight
Model Number
Found on page #
Standard
240 lbs.
JSK 37FSL
Page 7
* The
Page 2
RevJ
JSK37U
1 2 3 4 25 24 23
TOPPLATE ASSEMBLIES
SK 79002-00 See page 5 for air release components See page 8 for topplate options SK 75014-03
(Bushings Only)
22 5 21 20 19 18
13R 16R
SK 75014-01
6 7 9 8
10 11 12
SK 75016-00
17
13B SK 72953-01
REBUILD PROCEDURES
26
15 13 Item
1 2 3 4 5 6 7 8 9 10 11 12 13 13B 13R 14
16
14
SK 75013-20
27
Description
Cushion ring bolt Retainer Cushion ring insert Lock jaw pivot pin Collar Bushing Bracket pin Tab washer 1/2-13 x 3/4 lg. Hex bolt Plate spring External tooth lock washer Hex bolt LH Release handle Retractable Handle w/spring RH Release handle Pivot bolt assembly
Part No.
SK 73121-55 SK 3105-93 SK 3105-92 SK 72106-67 SK 3105-95 SK 2905-94 SK 79011-03 SK 73104-47 SK 70202-15 SK 70993-00 SK 70301-00 SK 73121-28B SK 73105-15 SK 75016-04 SK 79009-27 SK 71513
Item
15 16 16R 17 18 18R 19 20 21 22 23 24 25 26 27
Description
Locking bar bolt assembly LH Lever with bushing RH Lever with bushing Locking bar LH Lock jaw RH Lock jaw Lock jaw spring Eye bolt Ring Guide piece Adjusting screw with hex nut Double tension spring Lubricating kit Rebuild Procedures Info Pack
Part No.
SK 73221-01 SK 3105-140 SK 3105-18 SK 3205-06 SK 1489LZ SK 1489Z SK 847 SK 2106-69 SK 2106-70 SK 73205-07 SK 3105-151 SK 3105-20 SK 3108-02 LT JSK37-03 SK 75020-01
Minor Rebuild Kit (see pg. 31) Cushion and Lock Jaw
Includes Items 1-4, 18-21 & 25 above Order Number Weight
SK 73221-50Z SK 75013-02
6 lbs. 6 lbs.
TOPPLATE ASSEMBLIES
1 2 3 4
24 29 23
See page 5 for air release components See page 8 for topplate options
28
SK 75014-03
(Bushings Only)
22
13R 16R
SK 75014-01
5 7 9 8 19 10 11 12 18 17
13B SK 72953-01
REBUILD PROCEDURES
6 21 20
SK 75016-00
26
15 13 Item
1 2 3 4 5 6 7 8 9 10 11 12 13 13B 13R 14
16
14
SK 75013-20
27
Description
Cushion ring bolt Retainer Cushion ring insert Lock jaw pivot pin Collar Bushing Bracket pin Tab washer 1/2-13 x 3/4 lg. Hex bolt Plate spring External tooth lock washer Hex bolt LH Release handle Retractable Handle w/spring RH Release handle Pivot bolt assembly
Part No.
SK 73121-55 SK 3105-93 SK 3105-92 SK 72106-67 SK 3105-95 SK 2905-94 SK 79011-03 SK 73104-47 SK 70202-15 SK 70993-00 SK 70301-00 SK 73121-28B SK 73105-15 SK 75016-04 SK 79009-27 SK 71513
Item
15 16 16R 17 18 18R 19 20 21 22 23 24 25 26 27 28 29
Description
Locking bar bolt assembly LH Lever with bushing RH Lever with bushing Locking bar LH Lock jaw RH Lock jaw Lock jaw spring Eye bolt Ring Guide piece Adjusting screw with hex nut Double tension spring Lubricating kit Rebuild Procedures Info Pack Low lube liner plates Securing bolt
Part No.
SK 73221-01 SK 3105-140 SK 3105-18 SK 3205-06 SK 1489LZ SK 1489Z SK 847 SK 2106-69 SK 2106-70 SK 73205-07 SK 3105-151 SK 3105-20 SK 3108-02 LT JSK37-03 SK 75020-01 SK 3105-129 SK 0010060
Order Number
Weight
SK 3106-003
RevJ
6 lbs.
Page 4
AIR RELEASE
1 2
SK 75014-02
JSK37H
TOPPLATE ASSEMBLIES 30 29 28
3 4 5H
7H 8 9H 5 6 7 8 9
SK 71005-07
(spring only)
27 26W 22 21 23 24 25 16 10 14 11 13 12
32 Standard JSK37U 32w Low Lube JSK37UW 32H JSK37H
Low Lube only JSK37UW
20 or 20w 19 18 17 15
SK 72953-01
SK 75014-01
Standard JSK37U & Low Lube JSK37UW
SK 75014-03
JSK37U Bushing Kit (Bushings Only)
Item
1 2 3 4 5 5H 6 7 7H 8 9 9H 10 11 12 13 14 15 16
Description
Cushion ring bolt Retainer Cushion ring insert Lock jaw pivot pin Collar (JSK37U) Collar (JSK37H) Rubber Bushing Bracket pin (JSK37U) Bracket Pin (JSK37H) Tab washer 1/2-13 x 3/4 lg. Hex bolt (JSK37U) 3/8-16 x 3/4 lg. Hex bolt (JSK37H) Retractable handle w/spring Pivot bolt assembly Locking bar bolt assembly LH Lever w/chamfer Locking bar LH Lock jaw Lock jaw spring
Part No.
SK-73121-55 SK-3105-93 SK-3105-92 SK-72106-67 SK-3105-95 SK-73105-95 SK-2905-94 SK-79011-03 SK-73104-05 SK-73104-47 SK-70202-15 SK-73121-28B SK-75016-04 SK-71513 SK-73221-01 SK-3105-140 SK-3205-06 SK-1489LZ SK-847
Item
17 18 19 20 20w 21 22 23 24 25 26w 27 28 29 30 32 32w 32H
Description
Eye bolt Ring Air cylinder (see pg. 34) 3/8-16 x 1/2 lg. Low hd scr. (37H&37U) 3/8-16 x 3/4 lg. Low hd scr. (Low Lube) 3/8 dia. Clevis pin (long) Cylinder mount 3/8 dia. Clevis pin (short) Cylinder clevis Flat washer Cylinder mount spacer (Low Lube only) Guide piece Adjusting screw with hex nut Double tension spring Lubricating kit Info pack (standard JSK37U) Info pack (standard JSK37UW) Info pack (standard JSK37H)
Part No.
SK-2106-69 SK-2106-70 SK-79020-04 SK-70209-00 SK-73121-55 SK-70105-00 SK-79020-05 SK-70105-01 SK-79020-06 SK-70302-01 SK-79020-11 SK-73205-07 SK-3105-151 SK-3105-20 SK-3108-02 SK 75020-09 SK-75020-12 SK-75020-14
Minor Rebuild Kit (see pg. 31) Cushion and Lock Jaw
Includes Items 1-4, 15-18 & 30 above
Topplate
Order Number
Weight
Order Number
Weight
SK 73221-50Z
6 lbs.
JSK37H
FIELD REPLACEMENT FOR HOLLAND TOPPLATES
TOPPLATE ASSEMBLIES
SK 79002-00
1 2 3 4
24 23
See page 5 for air release components See page 8 for topplate options
22
SK 75014-02
21 5 6
7 8
20 19 18 17 9 10 11 16 25 14 12 13
SK 75013-20
REBUILD PROCEDURES
SK 72953-01
SK 75016-00
15 26
Item
1 2 3 4 5 6 7 8 9 10 11 12 13
Description
Cushion ring bolt Retainer Cushion ring insert Lock jaw pivot pin Collar Bracket pin Tab washer Hex bolt Plate spring External tooth lock washer Hex bolt Release handle Pivot bolt assembly
Part No.
SK 73121-55 SK 3105-93 SK 3105-92 SK 72106-67 SK 73105-95 SK 73104-05 SK 73104-47 SK 73121-28B SK 70993-00 SK 70301-00 SK 73121-28B SK 73105-15 SK 71513
Item
14 15 16 17 18 19 20 21 22 23 24 25 26
Description
Locking bar bolt assembly Lever with bushing Locking bar Lock jaw Lock jaw spring Eye bolt Ring Guide piece Adjusting screw with hex nut Double tension spring Lubricating kit Rebuild Procedures Info Pack
Part No.
SK 73221-01 SK 3105-140 SK 3205-06 SK 1489LZ SK 847 SK 2106-69 SK 2106-70 SK 73205-07 SK 3105-151 SK 3105-20 SK 3108-02 LT JSK37-03 SK 75020-00
Minor Rebuild Kit (see pg. 31) Cushion and Lock Jaw L.H. Only
Includes Items 1-4, 17-20 & 24 above Order Number Weight
SK 73221-52Z
33 lbs.
SK 73221-50Z
6 lbs.
Page 6
RevJ
JSK37F
FIELD REPLACEMENT TOPPLATE
TOPPLATE ASSEMBLIES
SK 79002-00
1 2 3 4
24 23
22 21
SK 75014-07
5 6 7 8 17 9 10 11
SK 75016-00
20 19 18
SK 72953-01
16 25 15 26
SK 75013-20
REBUILD PROCEDURES
12
13
14
Item
1 2 3 4 5 6 7 8 9 10 11 12 13
Description
Cushion ring bolt Retainer Cushion ring insert Lock jaw pivot pin Collar Bracket pin Tab washer 1/2-13 x 3/4 lg. Hex bolt Release handle plate spring Lock washer 3/8-16 Hex bolt LH Release handle Pivot bolt assembly
Part No.
SK 73121-55 SK 3105-93 SK 3105-92 SK 72106-67 SK 79048-02 SK 79011-12 SK 73104-47 SK 70202-15 SK 70993-00 SK 70301-00 SK 73121-28B SK 73105-15 SK 71513
Item
14 15 16 17 18 19 20 21 22 23 24 25 26
Description
Locking bar bolt assembly LH Lever with bushing Locking bar LH Lock jaw Lock jaw spring Eye bolt Ring Guide piece Adjusting screw with hex nut Double tension spring Lubricating kit Rebuild Procedures Info Pack
Part No.
SK 73221-01 SK 3105-140 SK 3205-06 SK 1489LZ SK 847 SK 2106-69 SK 2106-70 SK 73205-07 SK 79010-07 SK 3105-20 SK 3108-02 LT JSK37-03 SK 75020-15
Minor Rebuild Kit (see pg. 31) Cushion and Lock Jaw L.H. Only
Includes Items 1-4, 17-20 & 24 above Order Number Weight
SK 75013-14
33 lbs.
SK 73221-50Z
6 lbs.
Page 7
RevJ
TOPPLATE
Order Number*
Topplate Style
Weight
JSK 37003
Standard L.H. Release Low Lube L.H. Release Holland Replacement Topplate
Internal Adjustment
Order Number* Topplate Style Weight
JSK 37015
Adjustment Screw located under the Topplate to hide from view and avoid Kingpin damage when a miscouple occurs. Option is available with all mounting configurations.
JSK 37010
Release handle lowered and Adjustment Screw located under the Topplate to avoid Kingpin damage when a miscouple occurs. Option is only available with stationary mounts above 6 high (see page 29).
240 lbs.
Front Release
Order Number*
Release handle located in the front of the fifth wheel. Option is only available with stationary mounts above 6 high (see page 29).
Topplate Style
Weight
*Pins, bushings & collars not included when ordering the topplate only.
*Order numbers listed are for topplate assemblies only. To order fifth wheel assemblies add the desired mounting configuration number to the end of the topplate assembly (Example: JSK 37001-A7PX24). Page 8
RevJ
CAPACITY: 50,000 maximum vertical load. 150,000 maximum drawbar pull. FEATURES: MADE IN U.S.A. BY Allows adjustment for vehicle combination lengths and tractor axle load distribution. Lightweight high strength low alloy construction that allows you to maximize payloads. Maintenance free construction allows for maximum equipment utilization. Slide travel is adjustable in 2 increments for precise positioning of fifth wheel. Release mechanism features an in-line secondary lock, assures positive, safe locking. Available in popular heights and slide travels. Automatic spring loaded adjustment of locking plungers. Composite cylinder and rod for long trouble free life. Maintenance-free pivot eliminates routine lubrication requirements. Upshock cushion reduces impact and provides torsional relief between tractor and trailer.
RevJ
Page 9
SLIDE BRACKET
(See Page 13)
SLIDE PLATE
(See Page 14)
Articulation __
Slider Style A
Height __
Slide Release P
Travel Options* __
Slide Travel __
Standard Lube Surface S With Low Lube Plates W Auto Lube (4 holes) A Left Hand Release L **Air Release A **Left Hand Retractable Handle B Standard Leave Blank **No-Tilt Convertible N ** No-Tilt Convertible option is not available with 7, 10 or 11 height Slide Brackets, with the Retractable Handle Release or Air release. See page 30 for details.
7 8 9 10 11
12 12 16 16 24 24 36 36 48 48 X None A Travel minus 8" B Travel minus 10" C Travel minus 12 D Travel minus 14 Etc *Travel options restrict the forward travel as described above using a removable stop. For a fixed weld in stop specify X and select the desired travel length from the chart below.
Pneumatic P
DIMENSIONAL INFORMATION
L A Spaces @ 4.0 = B
Dim T Travel 12 16 24 36 48
Dim L Length 40 44 52 64 76
A 9 10 12 15 18
Bolt Pattern B 36 40 48 60 72
C 20 22 26 32 38
T 11.6 10 Min.
48 46 44 42 40 38
T = Slide Travel
RevJ
Page 10
Travel
Height
Weight
Model Number
6.75 7.75 12 8.75 9.75 10.75 6.75 7.75 16 8.75 9.75 10.75 6.75 7.75 24 8.75 9.75 10.75 6.75 7.75 36 8.75 9.75 10.75 6.75 7.75 48 8.75 9.75 10.75
457 lbs. 462 lbs. 468 lbs. 490 lbs. 501 lbs. 465 lbs. 470 lbs. 476 lbs. 498 lbs 509 lbs. 479 lbs. 484 lbs. 490 lbs. 512 lbs. 523 lbs. 501 lbs. 506 lbs. 512 lbs. 534 lbs. 545 lbs. 523 lbs. 528 lbs. 534 lbs. 556 lbs. 567 lbs.
JSK 37USL-A7PX12 JSK 37USL-A8PX12 JSK 37USL-A9PX12 JSK 37USL-A10PX12 JSK 37USL-A11PX12 JSK 37USL-A7PX16 JSK 37USL-A8PX16 JSK 37USL-A9PX16 JSK 37USL-A10PX16 JSK 37USL-A11PX16 JSK 37USL-A7PX24 JSK 37USL-A8PX24 JSK 37USL-A9PX24 JSK 37USL-A10PX24 JSK 37USL-A11PX24 JSK 37USL-A7PX36 JSK 37USL-A8PX36 JSK 37USL-A9PX36 JSK 37USL-A10PX36 JSK 37USL-A11PX36 JSK 37USL-A7PX48 JSK 37USL-A8PX48 JSK 37USL-A9PX48 JSK 37USL-A10PX48 JSK 37USL-A11PX48
Auto Lube
Drilled & Tapped 1/8 NPT (4) Holes
Air Release
Model numbers shown have standard topplate, left hand release and air slide.
RevJ
Page 11
*Slide Bracket Assembly *Slide Bracket Assembly is available in fifth wheel heights: 7, 8, 9, 10 or 11. See chart below for order numbers and see page 13 for details.
**Slide Plate Assembly **Slide Plate Assembly is available in standard travel lengths: 12, 16, 24, 36, 48. See chart below for order numbers and see page 14 for details.
7 F.W. Height 8 F.W. Height 9 F.W. Height 10 F.W. Height 11 F.W. Height
Page 12
RevJ
11
11
1*
Item
1 2 3 4 5 6 7 8
Description
Slide bracket* Spring Pivot Arm Pivot Linkage Double Coil Spring 1/2-13 Lock Nut 3/8 Dia.x 3/4 Shoulder Screw Flanged Bearing
Part No.
SK 77001-xx SK 77293-00 SK 77289-00 SK 77290-00 V2026100 SK 70402-04 SK 70201-09 SK 77292-00
Item
9 10 11 12 13 14 15
Description
5/16-18 Lock Nut Cylinder Assembly (see pg 34) Plunger Flat Washer Cotter Pin 3/8 Dia. Clevis Pin Flat Washer
Part No.
SK 70402-01 SK 75015-03 SK 77007-01 SK 70302-05 SK 70101-01 SK 70102-00 SK 70302-02
*Item #1 available in fifth wheel heights: 7, 8, 9, 10 or 11. Replace XX in part number with appropriate height (e.g. SK 77001-08).
RevJ
Page 13
1*
Item
1
Description
Slider weldment*
Part No.
SK 77037-xx
Item
2
Description
Rear Stop
Part No.
SK 77041
*Item #1 available in travel lengths: 12, 16, 24, 36 & 48. Replace XX in part number with appropriate length (e.g. SK 77037-12).
RevJ
Page 14
Slide mechanism unlocked CAPACITY: 50,000 maximum vertical load. 150,000 maximum drawbar pull. FEATURES: MADE IN U.S.A. BY Allows adjustment for vehicle combination lengths and tractor axle load distribution. Patented integral mounting angle design eliminates additional mounting angle weight. Lightweight high strength low alloy construction (up to 120 lbs. lighter than competitive models) that allows you to maximize payloads. Maintenance free construction allows for maximum equipment utilization. Slide travel is adjustable in 2 increments for precise positioning of fifth wheel. Fully adjustable for all frame widths. Release mechanism features an in-line secondary lock, assures positive, safe locking. Available in popular heights and slide travels. Automatic spring-loaded adjustment of locking plungers. Composite cylinder and rod for long trouble free life. Maintenance-free pivot eliminates routine lubrication requirements. Upshock cushion reduces impact and provides torsional relief between tractor and trailer. Removable/Repositionable slide stops that allow for easy: Removal of slide bracket. Limitation of slide travel for special applications.
RevJ
Page 15
SLIDE BRACKET
(See Page 13)
Articulation __
Slider Style B
Height __
Slide Release P
Travel Options* __
Slide Travel __
Standard Lube Surface S With Low Lube Plates W Auto Lube (4 holes) A Left Hand Release L **Air Release A **Left Hand Retractable Handle B
7 8 9 10 Pneumatic P
12 12 18 18 24 24 36 36 48 48
** No-Tilt Convertible option is only available with 9 height Slide Bracket and with the Left Hand Release. See page 30 for details.
DIMENSIONAL INFORMATION
L
5.0 .5
Dim T Travel 12 18 24 36 48
Dim L Length 41 47 53 65 77
A 10 12 14 18 22
Bolt pattern specified by customer A Bolts Min. Reqd To Mount (See Page 35)
T = Slide Travel
L = Overall Length
RevJ
Page 16
Travel
Height
Weight
Model Number
6.75 12 7.75 8.75 9.75 6.75 18 7.75 8.75 9.75 6.75 24 7.75 8.75 9.75 6.75 36 7.75 8.75 9.75 6.75 48 7.75 8.75 9.75
Weight includes mounting angles.
473 lbs. 479 lbs. 483 lbs. 489 lbs. 481 lbs. 487 lbs. 491 lbs. 497 lbs. 499 lbs. 505 lbs. 509 lbs. 515 lbs. 524 lbs. 530 lbs. 534 lbs. 540 lbs. 549 lbs. 555 lbs. 559 lbs. 565 lbs.
JSK 37USL-B7PG12 JSK 37USL-B8PG12 JSK 37USL-B9PG12 JSK 37USL-B10PG12 JSK 37USL-B7PG18 JSK 37USL-B8PG18 JSK 37USL-B9PG18 JSK 37USL-B10PG18 JSK 37USL-B7PG24 JSK 37USL-B8PG24 JSK 37USL-B9PG24 JSK 37USL-B10PG24 JSK 37USL-B7PG36 JSK 37USL-B8PG36 JSK 37USL-B9PG36 JSK 37USL-B10PG36 JSK 37USL-B7PG48 JSK 37USL-B8PG48
Frame Width
Change L to A e.g. JSK 37USA-B7PG24 Change S to A e.g. JSK 37UAL-B7PG24 Change S to W e.g. JSK 37UWL-B7PG24
Auto Lube
Drilled & Tapped 1/8 NPT (4) Holes
Air Release
Model numbers shown have standard topplate, left hand release, air slide and 34 frame width.
Page 17
RevJ
*Slide Bracket Assembly is available in fifth wheel heights: 7, 8, 9 or 10. See chart below for order numbers and see page 19 for details.
**Slide Rail Assembly is available in standard travel lengths: 12, 18, 24, 36, 48. See chart below for order numbers and see page 20 for details.
RevJ
Page 18
9 10 3 2
*1 2 3 Item
1 2 3 4 5 6 7 8 9 10 11
Description
Slide bracket* 3/4-10 Jam nut 3/4-10 Hex head bolt (full thread) 3/8-16 Lock nut Flat washer 3/8-16 Hex head bolt Spring bracket Plunger Spring 3/4-16 Jam nut Plunger screw
Part No.
SK 77240-xx SK 70403-05 SK 70207-01 SK 70402-00 SK 70302-05 SK 70202-05 SK 77238-00 SK 77233-01 SK 77293-00 SK 70403-01 SK 77234-00
Item
12 13 14 15 16 17 18 19 20 21 22
Description
5/16-18 Lock nut Pivot Arm 3/8 Dia. x 3/4 shoulder screw Pivot linkage Cylinder Assembly (see pg. 34) 3/8 Dia. clevis pin Cotter pin 1/2-13 Lock nut Flat washer Flanged bearing Double Coil Spring
Part No.
SK 70402-01 SK 77289-00 SK 70201-09 SK 77290-00 SK 75015-03 SK 70102-00 SK 70101-01 SK 70402-04 SK 70302-02 SK 77292-00 V2026100
*Item #1 available in fifth wheel heights: 7, 8, 9 or 10. Replace XX in part number with appropriate height (e.g. SK 77240-08).
RevJ
Page 19
6 5 4 2 3 *1
*1
Item
1 2 3
Description
Slide Rail* (1) side only Clamp Clamp Plate
Part No.
SK 77275-xx SK 77220-00 SK 77222-00
Item
4 5 6
Description
Cross Brace 3/8-16 x 1 3/4 Lg. Hex Bolt 3/8-16 x 1 1/4 Lg. Hex Bolt
Part No.
SK 77221-00 SK 70202-06 SK 70202-05
*Item #1 available in travel lengths: 12, 18, 24, 36 & 48. Replace XX in part number with appropriate length (e.g. SK 77275-12).
RevJ
Page 20
CAPACITY: 50,000 maximum vertical load. 150,000 maximum drawbar pull. FEATURES: MADE IN U.S.A. BY Heavy-duty brackets constructed of high strength low alloy material combine durability with lightweight. Maintenance-free pivot eliminates routine lubrication requirements. Upshock cushion reduces impact and provides torsional relief between tractor and trailer.
PART NUMBER
TOPPLATE
(See Page 1)
BRACKET
(See Page 29)
Articulation __
Bracket Style DB
Height __
Frame Width X
Standard Lube Surface S With Low Lube Plates W Auto Lube (4 holes) A Left Hand Release L Air Release A Left Hand Retractable Handle B
6 5.85 * 7 6.85 * 8 7.85 9 8.85 10 9.85 * 11 10.85 * Leave Blank Standard N No-Tilt Convertible*
RevJ
DIMENSIONAL INFORMATION
18.5 (10) Holes For 5/8 Bolts (See Page 35) 9.25 4.0 Typ.
5.0 .5
40.0
37.25
Auto Lube
Drilled & Tapped 1/8 NPT (4) Holes
8 .31
Air Release
Height
Weight
Model Number
6 7 8 9 10 11
317 lbs. 319 lbs. 323 lbs. 328 lbs. 372 lbs. 385 lbs.
JSK 37USL-DB6X JSK 37USL-DB7X JSK 37USL-DB8X JSK 37USL-DB9X JSK 37USL-DB10X JSK 37USL-DB11X
Change L to A e.g. JSK 37USA-DB6X
* Nominal height shown, for actual height see line drawing above. Model numbers shown have standard topplate and left hand release.
RevJ
Page 22
CAPACITY: 50,000 maximum vertical load. 150,000 maximum drawbar pull. FEATURES: MADE IN U.S.A. BY Heavy-duty brackets constructed of high strength low alloy material combine durability with lightweight. Maintenance-free pivot eliminates routine lubrication requirements. Upshock cushion reduces impact and provides torsional relief between tractor and trailer.
PART NUMBER
TOPPLATE
(See Page 1)
BRACKET
(See Page 29)
Bracket Style PM
Height __
Frame Width X
Standard Lube Surface S With Low Lube Plates W Auto Lube (4 holes) A Left Hand Release L Air Release A Left Hand Retractable Handle B
RevJ
DIMENSIONAL INFORMATION
18.0 .65 x 1.75 Slot For 5/8 Bolts (See Page 35) 9.0 8.0 Typ.
5.0 .5
39.75
Auto Lube
Drilled & Tapped 1/8 NPT (4) Holes
8.5
5.44 TYP.
Air Release Note: For corrugated mounting plate, see page 39. Height * Weight
Model Number
6 7 8 9
* Nominal height shown, for actual height see line drawing above. Model numbers shown have standard topplate and left hand release.
RevJ
Page 24
CAPACITY: 50,000 maximum vertical load. 150,000 maximum drawbar pull. FEATURES: MADE IN U.S.A. BY Heavy-duty brackets constructed of high strength low alloy material combine durability with lightweight. Maintenance-free pivot eliminates routine lubrication requirements. Upshock cushion reduces impact and provides torsional relief between tractor and trailer.
PART NUMBER
TOPPLATE
(See Page 1)
BRACKET
(See Page 29)
Bracket Style AM
Height __
Frame Width __
Standard Lube Surface S With Low Lube Plates W Auto Lube (4 holes) A Left Hand Release L Air Release A Left Hand Retractable Handle B 6 5.91 7 6.91 8 7.91 9 8.91
Page 25
DIMENSIONAL INFORMATION
36.0 18.0 .38 4.0 5.0 .5
C = 33 1/2
E = 33 3/4 F = 33 7/8 G = 34 H = 34 1/8 J = 34 1/4 Change S to W e.g. JSK 37UWL-AM6G
Auto Lube
Drilled & Tapped 1/8 NPT (4) Holes
4.0 .38
Air Release
Height *
Weight
Model Number
6 7 8 9
* Nominal height shown, for actual height see line drawing above. Model numbers shown have standard topplate, left hand release and 34 frame width.
Page 26
RevJ
CAPACITY: 50,000 maximum vertical load. 150,000 maximum drawbar pull. FEATURES: MADE IN U.S.A. BY Heavy-duty brackets constructed of high strength low alloy material combine durability with lightweight. Maintenance-free pivot eliminates routine lubrication requirements. Upshock cushion reduces impact and provides torsional relief between tractor and trailer.
PART NUMBER
TOPPLATE
(See Page 1)
BRACKET
(See Page 29)
Bracket Style XM
Height __
Frame Width X
Standard Lube Surface S With Low Lube Plates W Auto Lube (4 holes) A Left Hand Release L Air Release A Left Hand Retractable Handle B 6 5.54 7 6.54 8 7.54 9 8.54
Page 27
DIMENSIONAL INFORMATION
13.8
3.9 5.0 .5
34.0
Auto Lube
3.9
6 7 8 9
* Nominal height shown, for actual height see line drawing above. Model numbers shown have standard topplate and left hand release.
RevJ
Page 28
**For other frame widths change G to appropriate shown on page 25. (e.g. AM6C)
*Pins, bushings & collars not included when ordering brackets only.
RevJ
Page 29
NO-TILT CONVERTIBLE
Outboard Slide Bracket Assemblies 8 High Slide Bracket Asm NA8P 9 High Slide Bracket Asm NA9P
BRACKET OPTIONS
1 5 4
6 7 8 9 10 11 12
Item
1 2 3 4 5 6 7 8 9 10 11 12
Description
Lock Nut Rear Stop 8 height Rear Stop 9 height 2 1/2 lg. Shoulder Screw Thick Shim (round) Thin Shim (round) 1/2-13 Screw 8 height 1/2-13 Screw 9 height Front Stop 8 height Front Stop 9 height Spring Plunger Plug Jam Nut 3/4 lg. Shoulder Screw Front Tilt Stop Plate
Part No.
SK-70402-01 SK-72066-01 SK-72066-02 SK-70201-02 SK-72068-12 SK-72068-06 SK-70202-08 SK-70202-16 SK-72065-08 SK-72065-09 SK-71015-01 SK-71003-01 SK-70403-04 SK-70201-14 SK-77084-00
6 5 4 7 8 9 10
Item
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Description
Lock Nut Rear Stop 2 1/2 lg. Shoulder Screw Thick Shim (rectangle) Thin Shim (rectangle) 1/2-13 Screw L.H. Front Stop 1 lg. Shoulder Screw Spring Plunger Jam Nut Roll Pin L.H. Front Tilt Stop Plate R.H. Front Stop R.H. Front Tilt Stop Plate Thick Shim (round) Thin Shim (round)
Part No.
SK-70402-01 SK-72066-01 SK-70201-02 SK-72069-12 SK-72069-06 SK-70202-26 SK-72067-29 SK-70201-12 SK-71015-01 SK-70403-04 SK-70104-03 SK-72064-00 SK-72065-29 SK-72063-00 SK-72068-12 SK-72068-06
2 1
11 13 12
16 15 14
STATIONARY PARTS
(Adds 26 lbs to standard weight) Complete Stationary Assemblies 8 High Flat Plate Asm NDB8X 9 High Flat Plate Asm NDB9X
6 5 4 7 8 9 10 13 11
Item
1 2 3 4 5 6 7 8 9 10 11 12 13
Description
Lock Nut Rear Stop 2 1/2 lg. Shoulder Screw Thick Shim (rectangle) Thin Shim (rectangle) 1/2-13 Screw 8 height 1/2-13 Screw 9 height LH Front Stop 8 height LH Front Stop 9 height 1 lg. Shoulder Screw Plunger Spring Jam Nut LH Front Tilt Stop Plate Roll Pin RH Front Stop 8 height RH Front Stop 9 height RH Front Tilt Stop Plate Thick Shim (round) Thin Shim (round)
Part No.
SK-70402-01 SK-72066-01 SK-70201-02 SK-72069-12 SK-72069-06 SK-70202-17 SK-70202-18 SK-72067-08 SK-72067-09 SK-70201-12 SK-71015-01 SK-70403-04 SK-72064-00 SK-70104-03 SK-72065-18 SK-72065-19 SK-72063-00 SK-72068-12 SK-72068-06
3 2 1
12 14 16 15 Page 30
14 15 16
RevJ
REPLACEMENT KITS
SK 73221-50Z
6 lbs.
Includes: Ring, Eye bolt, Lock jaw spring, Lock jaw, Lock jaw pivot pin, Cushion ring insert, Cushion ring fixture, Lubrication kit, (4) Socket head cap screws
SK 3106-003
6 lbs.
RevJ
Page 31
To air supply
To air cylinder
Includes:
SK 75002-01 SK 75002-04
36 or less 48 or more
2 lbs. 2 lbs.
Cab Control Valve 30 SAE JS44 type A Nylon Tubing Fittings Bulk Head Fitting Coiled Air Line Wire Ties
To air cylinder
SK 75002-02 SK 75002-16
36 or less 48 or more
2 lbs. 2 lbs.
Page 32
RevJ
SK 75002-05
2 lbs.
Includes: Air Release Manifold Valve Air Release Inversion Valve Cab Control Plate Finger Guard
To air cylinder
To manifold assembly
SK 75002-12 SK 75002-15
1 lb. 1 lb.
Includes: 30 SAE JS44 type A Nylon Tubing Fittings Bulk Head Fitting Coiled Air Line
RevJ
Page 33
AIR CYLINDER
15 3/4"
12"
SK 75015-01
6 lbs.
SK 75015-03
4 lbs.
Includes: Composite cylinder, (2) Mounting Screws, (2) Lock Nuts (2) Spring Brackets, Double Coil Spring
Includes: Composite cylinder & rod, (2) Mounting Screws, (2) Lock Nuts
SK 75015-02
5 lbs.
SK 75015-05
5 lbs.
Includes: Stainless Steel Air Cylinder, Clevis, Long Clevis Pin, Short Clevis Pin, Washer
Page 34
RevJ
HARDWARE KITS
MOUNTING ACCESSORIES
Includes: 5/8 grade 8 fasteners Hardened steel SAE washers Grade C lock nuts
Note: Outboard sliding fifth wheel to mounting angle kits attach fifth wheel to mounting angles. To attach mounting angle to tractor frame order a mounting angle to tractor frame hardware kit. Outboard Sliding Fifth Wheel To Mounting Angle Kits
Slide Travel Fastener Qty. Weight Order Number
12 16 24 36 48
20 22 26 32 38
10 18
5 lbs. 8 lbs.
SK 75001-10 SK 75017-18
10 12 14 16 18
Page 35
RevJ
MOUNTING ACCESSORIES
3.0 1.69
Top of Truck Frame 2.38 A .65 x 1.38 Slot For 5/8 Bolt (See Page 35)
3/8
12 16 24 36 48 12 16 24 36 48 12 16 24 36 48 12 16 24 36 48
40 1/4 44 1/4 52 1/4 64 1/4 76 1/4 40 1/4 44 1/4 52 1/4 64 1/4 76 1/4 40 1/4 44 1/4 52 1/4 64 1/4 76 1/4 40 1/4 44 1/4 52 1/4 64 1/4 76 1/4
4 4 4 4 4 4 4 4 4 4 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2
22 lbs. 24 1/2 lbs. 29 lbs. 35 1/2 lbs. 42 lbs. 26 1/4 lbs. 29 lbs. 34 lbs. 42 lbs. 50 lbs. 19 1/2 lbs. 21 1/2 lbs. 25 1/2 lbs. 31 lbs. 37 lbs. 24 lbs. 26 lbs. 31 lbs. 38 lbs. 45 lbs.
SK 75007-12 SK 75007-16 SK 75007-24 SK 75007-36 SK 75007-48 SK 75008-12 SK 75008-16 SK 75008-24 SK 75008-36 SK 75008-48 SK 75009-12 SK 75009-16 SK 75009-24 SK 75009-36 SK 75009-48 SK 75010-12 SK 75010-16 SK 75010-24 SK 75010-36 SK 75010-48
RevJ
Page 36
MOUNTING ACCESSORIES
4.0
A 2.0
B Typ. 36.0
4 4 3 1/2 3 1/2
4 4 2 2
RevJ
Page 37
MOUNTING ACCESSORIES
B Typ. 2.0
.65 x 1.38 Slot For 5/8 Bolt (See Page 35) 2.0 B Typ. 36.0
4 4 3 1/2 3 1/2
4 4 2 2
RevJ
Page 38
MOUNTING ACCESSORIES
26.0
1.00 Height
Drilled & Tapped For 5/8 Bolt (8) Holes 16.0 Typ. 4.0 Typ. 5.438 Typ.
36.813
40.0
SK 75011-00
99 lbs.
RevJ
Page 39
SERVICE TOOLS
SERVICE TOOLS
KINGPIN GAGE
Order Number Weight
SK 76000-00
30 lbs.
SK 76001-01
4 1/2 lbs.
SK 75021-00
1 1/4 lbs.
SK 76003-00
1/4 lb.
SK 76005-01
19 lbs.
Page 40
RevJ
Today, Jost fifth wheels are recognized around the world for their high-quality, durability, and cost savings. The same qualities apply to all Jost equipment. Jost landing gear is standard equipment on most of the trailers in North America and our kingpins and turntables
You can also rely on Jost for personal, flexible service that meets your schedule. And with two manufacturing plants and distribution centers in the U.S., along with seven plants and thirteen distribution centers outside of North America, you can count on Jost to have the products you need. The reasons are simple.
Fifth Wheels
Landing Gear
Kingpins
Turntables
The right to alter specifications is reserved. 1770 Hayes Street Grand Haven, MI 49417 www.jostinternational.com Ph. (616) 846-7700 (800) 253-5105 Fax (616) 846-0310
LT SKCAT-01 Rev.J