Professional Documents
Culture Documents
The mounting diameter of your machine, and the proper length of tine needed for your aerification
are the two most important factors you should consider when selecting the correct tine.
Located below is a list of the most popular machines from Toro, John Deere, Jacobsen, Coremaster, Ryan, VERTI-DRAIN, Soil Reliever, and Wiedenmann,
and the corresponding mounting diameter options available for each machine.
The smaller mounts (1/2, 3/8) represent the Quad blocks used for our Quad line and solid/venting tines. Remember that Coremaster uses a unique mount
size, and we also offer CROSSTINES and solid tines to fit these machines.
Please take note of the unique mounts for the Wiedenmann machines as well. The machines require the 8mm, 12mm dimple mount, or the 1:10 conical screw
mount. Please consult your machine manual before choosing a tine.
This chart will help you determine what mounts can fit on your specific machine to determine what type of options you have when selecting a tine.
Also pay attention to a tines length. All machines are different. John Deere machines can easily take a tine longer than 6 inches, but Ryan has a recommended
tine height of 4.5 inches. So if you plan to use a tine longer than the recommended height, please keep a close eye on the tines during aerification to make sure
they are not creating a plowing effect in your soil.
Machine
3/8 Mount 1/2 Mount 5/8 Mount 3/4 Mount 7/8 Mount 8mm Mount 12mm Mount 18mm Mount 24mm Mount
Ryan GA-24
Ryan GA-30/60
VERTI-DRAIN 7212/7215/
7316/7416/7521/7526
Coremaster 6/12
Coremaster Precision 1200/1560
VERTI-DRAIN 7007/700/
7H/7110/7113/7117/7120/7626
12
(.725)
(.835)
x
(Dimple)
(Dimple)
(Conical screw)
(Dimple)
(Dimple)
(Conical screw)
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
1D500103
1DS500101
1D750501
When selecting a tine for your Toro and John Deere aerifier, make sure you
carefully check the mounting diameter and length to make your choices.
With the introduction of the Toro ProCore series aerifiers, both John Deere
and Toro aerifiers can accept a tine longer than five inches. For this reason,
JRM offers a wide variety of longer tines suitable for these machines with
additional core depth. Please note, that if you have an older model Toro
greens aerifier, any tine longer than five inches may not work on your
machine and may cause turf damage.
Coremaster tines are unique since they require a mounting diameter that
is different from all other brands. Therefore Coremaster tines are not
interchangeable with tines from other manufacturers. The unique mount
size has no effect on the tine design, quality, or use-life and indeed, all
other qualities of the tines are identical to comparable JRM coring tines.
CROSSTINES and quad tines are also available to fit Coremaster machines.
The JRM Ryan replacement parts are made to fit the GA 24, GA30, and GA60
aerifiers. In addition to our coring tines, many of the quads, solid tines, and
CROSSTINES will fit all three machines. Please carefully check the mounting
diameters and lengths to make sure the tines you order are correct. Most
Ryan machines will not accept a length longer than 4.5 inches. However,
the GA60 will accept a wide variety of JRM tines specifically designed for your
fairways.
1DS625504
1D500104
1DS750501
1T625102
1TS750502
1T625505
1TS500105
1TS625106
1TS625506
1TS750102
1R500102
JRM makes two DILLENNIUM tines specifically designed for use on Jacobsen
machines. Since their introduction, these two tines have gained wide
acceptance due to their exceptional cost/use-life. These tines should outlast
comparably priced tines by a factor of two or three to one. We are also making
these tines out of solid stock now and they will no longer have a welded
shank.
1RS625101
Finally, our DILLENNIUM lite tines are made of the same high-quality alloy
steel of which our flagship DILLENNIUM tines are made, but they have a
slightly thinner wall. These tines are for the superintendent who demands
the very finest possible cut and core quality. The use-life of these tines are
not as long as our standard DILLENNIUM tines, but it will produce the finest
coring job available today and will certainly outlast other coring tines. They
are especially useful on new or very soft greens with high sand or thatch
content where aerification is problematic. They are more likely to pull a core,
and the core itself is of higher quality with less compaction. All DILLENNIUM
lite tines are top-ejects, and cost less than a standard JRM DILLENNIUM
coring tine.
1J500501
1C500501
1J625501
1DL500502
1DL625503
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
13
Conventional
Coring TInes
John Deere
JRM Description
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
Price
1DS375503
4.5"
5/8"
.270"
.425"
.072"
$12.15
1D375101
5.5"
3/4"
.285"
.429"
.072"
$4.50
1DS375101
5.5"
3/4"
.285"
.429"
.072"
$5.35
1DS375801
5.5"
3/4"
.285"
.429"
.072"
$12.35
1DS375504
5"
3/4"
.270"
.425"
.072"
$12.15
1DS375501
5.75"
3/4"
.270"
.425"
.072"
$13.35
1D500103
4.25"
5/8"
.380"
.540"
.072"
$4.05
1D500503
4.5"
5/8"
.400"
.525"
.072"
$10.85
1DS500503
4.5"
5/8"
.400"
.525"
.072"
$12.15
1D500104
4.75"
3/4"
.390"
.550"
.072"
$4.05
1D500504
5"
3/4"
.400"
.525"
.072"
$10.85
1DS500504
5"
3/4"
.400"
.525"
.072"
$12.15
1D500101
5.5"
3/4"
.390"
.550"
.072"
$4.50
1DS500101
5.5"
3/4"
.390"
.550"
.072"
$5.35
1DS500801
5.5"
3/4"
.390"
.550"
.072"
$12.35
1D500501
5.75"
3/4"
.400"
.525"
.072"
$12.15
1DS500501
5.75"
3/4"
.400"
.525"
.072"
$13.35
1D500105
6"
3/4"
.390"
.550"
.072"
$4.50
1DS500105
6"
3/4"
.390"
.550"
.072"
$5.35
1DS500805
6"
3/4"
.390"
.550"
.072"
$12.35
1D500505
6.25"
3/4"
.400"
.525"
.072"
$12.15
1DS500505
6.25"
3/4"
.400"
.525"
.072"
$13.35
1D625103
4.25"
3/4"
.480"
.650"
.072"
$4.05
1D625503
4.5"
3/4"
.485"
.633"
.072"
$10.85
1DS625503
4.5"
3/4"
.485"
.633"
.072"
$12.15
1D625104
4.75"
3/4"
.480"
.650"
.072"
$4.05
1D625504
5"
3/4"
.485"
.633"
.072"
$10.85
1DS625504
5"
3/4"
.485"
.633"
.072"
$12.15
1D625101
5.5"
3/4"
.490"
.655"
.072"
$4.50
1DS625101
5.5"
3/4"
.490"
.655"
.072"
$5.35
1DS625801
5.5"
3/4"
.490"
.655"
.072"
$12.35
1D625501
5.75"
3/4"
.485"
.633"
.072"
$12.15
1DS625501
5.75"
3/4"
.485"
.633"
.072"
$13.35
1D625105
6"
3/4"
.490"
.655"
.072"
$4.50
1DS625105
6"
3/4"
.490"
.655"
.072"
$5.35
1DS625805
6"
3/4"
.490"
.655"
.072"
$12.35
1D625505
6.25"
3/4"
.485"
.633"
.072"
$12.15
1DS625505
6.25"
3/4"
.485"
.633"
.072"
$13.35
1D750101
6"
7/8"
.585"
.775"
.095"
$4.65
1DS750101
6"
7/8"
.585"
.775"
.095"
$5.50
1D750501
6.25"
7/8"
.535"
.745"
.095"
$13.35
1DS750501
6.25"
7/8"
.535"
.745"
.095"
$14.30
John Deere is a registered trademark of John Deere Co., Research Triangle Park, NC 27709
INFINITY Tines
14
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
Conventional
Coring TInes
Toro
JRM Description
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
Price
5"
3/4"
.270"
.425"
.072"
$12.15
1TS375501
1T500101
4.75"
3/4"
.385"
.560"
.072"
$4.05
1T500801
4.75"
3/4"
.385"
.560"
.072"
$9.85
1T500501
5"
3/4"
.400"
.525"
.072"
$10.85
1TS500501
5"
3/4"
.400"
.525"
.072"
$12.15
1T500102
5.5"
3/4"
.390"
.550"
.072"
$4.50
1TS500102
5.5"
3/4"
.390"
.550"
.072"
$5.35
1T500502
5.75"
3/4"
.400"
.525"
.072"
$12.15
1TS500502
5.75"
3/4"
.400"
.525"
.072"
$13.35
1T500105
6"
3/4"
.390"
.550"
.072"
$4.50
1TS500105
6"
3/4"
.390"
.550"
.072"
$5.35
1T500505
6.25"
3/4"
.400"
.525"
.072"
$12.15
1TS500505
6.25"
3/4"
.400"
.525"
.072"
$13.35
1T625101
4.75"
3/4"
.480"
.650"
.072"
$4.05
1T625801
4.75"
3/4"
.480"
.650"
.072"
$9.85
1T625501
5"
3/4"
.485"
.633"
.072"
$10.85
1TS625501
5"
3/4"
.485"
.633"
.072"
$12.15
1T625102
5.5"
3/4"
.490"
.655"
.072"
$4.50
1TS625102
5.5"
3/4"
.490"
.655"
.072"
$5.35
1T625502
5.75"
3/4"
.485"
.633"
.072"
$12.15
1TS625502
5.75"
3/4"
.485"
.633"
.072"
$13.35
1T625105
6"
3/4"
.490"
.655"
.072"
$4.50
1TS625105
6"
3/4"
.490"
.655"
.072"
$5.35
1T625505
6.25"
3/4"
.485"
.633"
.072"
$12.15
1TS625505
6.25"
3/4"
.485"
.633"
.072"
$13.35
1TS625106
6.25"
3/4"
.490"
.655"
.072"
$5.15
1TS625506
6.50"
3/4"
.485"
.633"
.072"
$13.75
1T750101
5"
7/8"
.585"
.775"
.095"
$4.50
1T750501
5.25"
7/8"
.535"
.745"
.095"
$12.05
1TS750501
5.25"
7/8"
.535"
.745"
.095"
$13.35
1TS750102
6"
7/8"
.585"
.775"
.095"
$5.50
1T750502
6.25"
7/8"
.535"
.745"
.095"
$13.35
1TS750502
6.25"
7/8"
.535"
.745"
.095"
$14.30
INFINITY Tines
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
15
Conventional
Coring TInes
Ryan/Coremaster/Jacobsen
JRM Description
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
Price
1RS375501
4.5"
5/8"
.270"
.425"
.072"
$12.15
1RS375502
4.5"
3/4"
.270"
.425"
.072"
$12.15
1R500101
4.25"
5/8"
.380"
.540"
.072"
$4.05
1R500501
4.5"
5/8"
.350"
.525"
.072"
$10.85
1RS500501
4.5"
5/8"
.350"
.525"
.072"
$12.15
1R500102
4.25"
3/4"
.380"
.540"
.072"
$4.05
1R500502
4.5"
3/4"
.350"
.525"
.072"
$10.85
1RS500502
4.5"
3/4"
.350"
.525"
.072"
$12.15
1R625101
4.25"
3/4"
.480"
.650"
.072"
$4.05
1RS625101
4.25"
3/4"
.480"
.650"
.072"
$5.35
1R625501
4.5"
3/4"
.485"
.633"
.072"
$10.85
1RS625501
4.5"
3/4"
.485"
.633"
.072"
$12.15
Ryan is a registered trademark of TEXTRON Turf Care and Specialty Products, Racine, WI 53403
JRM Description
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
Price
1CS375501
4.75"
.725"
.270"
.425"
.072"
$12.15
1C500101
4.5"
.725"
.390"
.550"
.072"
$4.05
1C500501
4.75"
.725"
.350"
.525"
.072"
$10.85
1CS500501
4.75"
.725"
.350"
.525"
.072"
$12.15
1C625101
4.5"
.835"
.495"
.650"
.072"
$4.05
1C625501
4.75"
.835"
.485"
.633"
.072"
$10.85
2T625103
5"
.725"
N/A
.625
Solid
$4.40
2CX500103
4.6"
.725"
N/A
.500"
Solid
$8.36
2CX500503
4.8"
.725"
N/A
.500"
Solid
$12.29
JRM Description
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
Price
1J500501
6.25"
5/8"
.350"
.525"
.072"
$12.65
1J625501
6.25"
5/8"
.480"
.633"
.072"
$14.85
Jacobsen is a registered trademark of TEXTRON Turf Care and Specialty Products, Racine, WI 53403
1J500501 replaces Jacobsen AeroKing 1/2 Side Eject
1J625501 replaces Jacobsen AeroKing 5/8 Side Eject
16
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
Conventional
Coring TInes
JRM Description
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
Price
1DL500501
4.5"
5/8"
.406"
.543"
.055"
$9.50
1DL500502
5"
3/4"
.406"
.543"
.055"
$9.50
1DL500503
6"
3/4"
.406"
.543"
.055"
$9.50
1DL500504
5.625"
3/4"
.406"
.543"
.055"
$9.50
1DL625501
4.5"
3/4"
.502"
.642"
.055"
$10.05
1DL625502
5"
3/4"
.502"
.642"
.055"
$10.05
1DL625503
6"
3/4"
.502"
.642"
.055"
$10.05
Our DILLENNIUM lite tines are made of the same high-quality alloy steel of which our flagship DILLENNIUM tines are made, but they have a slightly thinner
wall. These tines are for the superintendent who demands the very finest possible cut and core quality. The use-life of these tines are not as long as our standard
DILLENNIUM tines, but it will produce the finest coring job available today and will certainly outlast other coring tines. They are especially useful on new or very
soft greens with high sand or thatch content where aerification is problematic. They are more likely to pull a core, and the core itself is of higher quality with less
compaction. All DILLENNIUM lite tines are top-ejects, and cost less than a standard JRM DILLENNIUM coring tine.
JRM Description
Length
Color
Price
9S500101
5"
Black
$12.00
9S500102
5"
Pink
$12.00
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
17
Quad TineS
At JRM, we are aware that every manufacturer has a
different method of measuring the outside diameter
of its product. We want to clarify how we measure ours,
especially with our tapered ODs for our quad line.
We determine our OD based on the initial entry of the
tine into the soil. Although the OD of the tine is larger
toward the mount, and that width may make the hole
larger initially, the hole will always shrink back down to
the size of initial entry. We measure our OD at the tip right
after we cut the stock for the part. It may seem deceiving
by looking at the part with the naked eye, but after many
field studies, weve determined this is the most accurate
way to measure the outside diameter.
Quad tines are the smallest and least invasive coring tines available.
Our quad tines are milled from a single rod for enhanced strength and
longevity, and it also comes with a variable wall thickness for longer
life. Quad tines are ideal for use during times of stress, or when a short
grow-in period is desired. They may be used in standard mounting blocks
(3/4), or in the closely spaced Quad Block containing six or seven tines.
The DILLENNIUM quad provides at least twice the use-life compared to
the premium quad.
Our standard quads are some of the smallest coring tines on the market,
and are extremely useful when you are seeking a very minimal core.
The SuperQuad tines come with a slightly larger outside diameter
than our standard quad, and they have quickly been adopted by many
superintendents as their tine of choice because of the exceptionally
fine core it produces and reduced grow-in time required.
When JRM created the Magnum Quad, the family of tines became an
instant success. Overnight, customers were able to address the many
unique needs associated with the new hybrid bent grasses. The Magnum
Quad was specifically designed for de-thatching and maximizing
nutrient/gas exchange. This was achieved with closer spacing and a
larger core diameter. The DILLENNIUM Magnum Quad offers the same
robust tine as the premium, but comes with an enhanced carbide tip.
This tip maximizes the value of the tine by offering consistent core depth
and far superior quality. A DILLENNIUM Magnum Quad should outlast
a premium Magnum Quad by 200 to 300%.
1Q250103
1Q250503
1QT250101
1QT250503
1Q250106
1QT375105
1QT375511
1Q375505
1Q375103
1QT450104
1Q450104
1Q500502
1Q500103
1Q500106
1QT500105
1Q500508
1QT500501
The Magnum Quad Plus tines are the largest quad tine that we offer.
After the quick success of the Magnum Quad introduced in 2004, we
received requests for a new and even larger quad tine that would give
greater coverage. The Mag Plus tines have an outside diameter of .612
inches for maximum coverage. No other quad offers a core as large with
a possibility of 1x1 inch spacing. All Mag Quad Plus tines are made of
4140, high-carbon, alloy steel for strength and longevity.
1QT575104
1Q575102
1QT625103
18
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
Standard Quads/
Super QuadTM Tines
Standard Quads
Part No.
JRM Description
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
Price
1Q250104
4.20"
5/16"
.240"
.330"
.065"
$5.20
1Q250504
4.325"
5/16"
.240"
.327"
.065"
$10.95
3.5"
3/8"
.240"
.330"
.065"
$4.95
3.5"
3/8"
.240"
.330"
.065"
$4.95
3.625"
3/8"
.240"
.327"
.065"
$9.85
3.625"
3/8"
.240"
.327"
.065"
$9.85
4.5"
3/8"
.240"
.330"
.065"
$5.75
*1QT250105
4.5"
3/8"
.240"
.330"
.065"
$5.75
*1QT250805
4.5"
3/8"
.240"
.330"
.065"
$9.95
4.625"
3/8"
.240"
.327"
.065"
$10.95
$10.95
1Q250101
*1QT250101
1Q250501
*1QT250501
1Q250105
1Q250505
*1QT250505
4.625"
3/8"
.240"
.327"
.065"
1Q250103
5"
3/8"
.240"
.330"
.065"
$6.00
1Q250803
5"
3/8"
.240"
.330"
.065"
$10.50
*1QT250103
5"
3/8"
.240"
.330"
.065"
$6.00
*1QT250803
5"
3/8"
.240"
.330"
.065"
$10.50
5.125"
3/8"
.240"
.327"
.065"
$11.50
5.125"
3/8"
.240"
.327"
.065"
$11.50
4"
1/2"
.240"
.330"
.065"
$5.20
4.125"
1/2"
.240"
.327"
.065"
$10.95
1Q250503
*1QT250503
1Q250102
1Q250502
1Q250106
1Q250506
1Q250107
1Q250507
4.5"
1/2"
.240"
.330"
.065"
$5.75
4.625"
1/2"
.240"
.327"
.065"
$10.95
4"
5/8"
.240"
.330"
.065"
$5.20
4.125"
5/8"
.240"
.327"
.065"
$10.95
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
3.5"
3/8"
.335"
.460"
.072"
3.5"
3/8"
.335"
.460"
.072"
$6.30
3.625"
3/8"
.320"
.400"
.072"
$10.40
$10.40
Super QuadsTM
Part No.
1Q375100
*1QT375100
1Q375500
JRM Description
TM
Price
$6.30
3.625"
3/8"
.320"
.400"
.072"
1Q375105
4.5"
3/8"
.335"
.460"
.072"
$7.40
1Q375805
4.5"
3/8"
.335"
.460"
.072"
$10.50
*1QT375500
*1QT375105
4.5"
3/8"
.335"
.460"
.072"
$7.40
*1QT375805
4.5"
3/8"
.335"
.460"
.072"
$10.50
4.625"
3/8"
.320"
.400"
.072"
$11.50
4.625"
3/8"
.320"
.400"
.072"
$11.50
5"
3/8"
.335"
.460"
.072"
$7.65
*1QT375111
5"
3/8"
.335"
.460"
.072"
$7.65
*1QT375811
5"
3/8"
.335"
.460"
.072"
$11.05
5.125"
3/8"
.320"
.400"
.072"
$12.05
5.125"
3/8"
.320"
.400"
.072"
$12.05
4.5"
12mm
.335"
.460"
.072"
$7.40
4.625"
12mm
.320"
.400"
.072"
$11.50
1Q375505
*1QT375505
1Q375111
1Q375511
*1QT375511
1Q375106
1Q375506
1Q375101
1Q375501
1Q375102
1Q375502
1Q375103
1Q375503
1Q375104
1Q375504
3.5"
1/2"
.335"
.460"
.072"
$6.30
3.625"
1/2"
.320"
.400"
.072"
$10.40
4.5"
1/2"
.335"
.460"
.072"
$7.40
4.625"
1/2"
.320"
.400"
.072"
$11.50
4.5"
5/8"
.335"
.460"
.072"
$7.40
4.625"
5/8"
.320"
.400"
.072"
$11.50
4.5"
3/4"
.335"
.460"
.072"
$7.40
4.625"
3/4"
.320"
.400"
.072"
$11.50
* All QT parts have a shortened shank designed for the Toro ProCore Series 648 aerifier
INFINITY Tines
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
19
Magnum LITETM/DILLENNIUM
Magnum QuadTM TINES
Magnum LiteTM Tines
Part No.
1Q450104
JRM Description
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
Price
4.5"
3/8"
.350"
.480"
.065"
$7.95
4.5"
3/8"
.350"
.480"
.065"
$7.95
1Q450103
3.5"
1/2"
.350"
.480"
.065"
$7.10
1Q450102
4.5"
1/2"
.350"
.480"
.065"
$7.65
1Q450101
4.5"
5/8"
.350"
.480"
.065"
$7.65
*1QT450104
JRM Description
1Q500110
1Q500510
1Q500105
*1QT500105
1Q500505
*1QT500505
1Q500101
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
6.5"
5/16"
.400"
.525"
.072"
$8.75
6.625"
5/16"
.403"
.504"
.072"
$12.55
$7.10
3.5"
3/8"
.400"
.525"
.072"
3.5"
3/8"
.400"
.525"
.072"
$7.10
3.625"
3/8"
.403"
.504"
.072"
$11.20
3.625"
3/8"
.403"
.504"
.072"
$11.20
4.5"
3/8"
.400"
.525"
.072"
$7.95
*1QT500101
4.5"
3/8"
.400"
.525"
.072"
$7.95
*1QT500801
1Q500501
*1QT500501
4.5"
3/8"
.400"
.525"
.072"
$10.75
4.625"
3/8"
.403"
.504"
.072"
$11.75
$11.75
4.625"
3/8"
.403"
.504"
.072"
1Q500103
5.5"
3/8"
.400"
.525"
.072"
$8.20
*1Q500803
5.5"
3/8"
.400"
.525"
.072"
$11.30
*1QT500103
5.5"
3/8"
.400"
.525"
.072"
$8.20
*1QT500803
5.5"
3/8"
.400"
.525"
.072"
$11.30
5.625"
3/8"
.403"
.504"
.072"
$12.30
5.625"
3/8"
.403"
.504"
.072"
$12.30
4.5"
12mm
.400"
.525"
.072"
$7.95
4.625"
12mm
.403"
.504"
.072"
$11.60
3.5"
1/2"
.400"
.525"
.072"
$7.10
3.625"
1/2"
.403"
.504"
.072"
$11.20
1Q500503
*1QT500503
1Q500109
1Q500509
1Q500106
1Q500506
1Q500102
4.5"
1/2"
.400"
.525"
.072"
$7.95
1Q500802
4.5"
1/2"
.400"
.525"
.072"
$10.75
4.625"
1/2"
.403"
.504"
.072"
$11.75
5.5"
1/2"
.400"
.525"
.072"
$8.20
5.625"
1/2"
.403"
.504"
.072"
$12.30
4.5"
5/8"
.400"
.525"
.072"
$7.95
4.625"
5/8"
.403"
.504"
.072"
$11.75
4.5"
3/4"
.400"
.525"
.072"
$7.95
4.625"
3/4"
.403"
.504"
.072"
$11.75
5.5"
3/4"
.400"
.525"
.072"
$8.20
5.625"
3/4"
.403"
.504"
.072"
$12.05
1Q500502
1Q500104
1Q500504
1Q500107
1Q500507
1Q500108
1Q500508
1Q500111
1Q500511
* All QT parts have a shortened shank designed for the Toro ProCore Series 648 aerifier
20
Price
INFINITY Tines
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
Magnum Quad
Plus Tines
Magnum Quad Plus Tines
Part No.
1Q575103
*1QT575103
1Q575503
Length
Mount Diameter
I.D.
Tapered O.D.
Wall
JRM Description
4.5"
3/8"
.470"
.595"
.063"
Price
$8.20
4.5"
3/8"
.470"
.595"
.063"
$8.20
4.5"
3/8"
.465"
.597"
.063"
$12.05
*1QT575503
4.5"
3/8"
.465"
.597"
.063"
$12.05
1Q5785108
5.30"
3/8"
.470"
.595"
.063"
$8.35
*1QT575108
5.30"
3/8"
.470"
.595"
.063"
$8.35
5.30"
3/8"
.465"
.597"
.063"
$12.20
1Q575508
*1QT575508
5.30"
3/8"
.465"
.597"
.063"
$12.20
1Q575104
6"
3/8"
.470"
.595"
.063"
$8.75
*1Q575804
$11.55
6"
3/8"
.470"
.595"
.063"
*1QT575104
6"
3/8"
.470"
.595"
.063"
$8.75
*1QT575804
6"
3/8"
.470"
.595"
.063"
$11.55
6"
3/8"
.465"
.597"
.063"
$12.55
6"
3/8"
.465"
.597"
.063"
$12.55
1Q575504
*1QT575504
1Q575109
4.5"
12mm
.470"
.595"
.063"
$8.20
1Q575509
4.5"
12mm
.465"
.597"
.063"
$12.05
1Q575105
6"
12mm
.470"
.595"
.063"
$8.75
1Q575505
6"
12mm
.465"
.597"
.063"
$12.55
1Q575102
4.5"
1/2"
.470"
.595"
.063"
$8.20
1Q575802
4.5"
1/2"
.470"
.595"
.063"
$11.05
1Q575502
4.5"
1/2"
.465"
.597"
.063"
$12.05
1Q575107
5"
1/2"
.470"
.595"
.063"
$8.35
$12.20
1Q575507
5"
1/2"
.465"
.597"
.063"
1Q575106
5.5"
3/4"
.470"
.595"
.063"
$8.50
1Q575506
5.5"
3/4"
.465"
.597"
.063"
$12.30
1Q625103
$8.30
4.5"
3/8"
.510"
.640"
.063"
*1QT625103
4.5"
3/8"
.510"
.640"
.063"
$8.30
*1QT625803
4.5"
3/8"
.510"
.640"
.063"
$11.65
5.5"
3/4"
.500"
.630"
.063"
$8.30
1Q625101
* All QT parts have a shortened shank designed for the Toro ProCore Series 648 aerifier
INFINITY Tines
Satisfied Customers
Mike Hard, Maintenance Technician, Alpine Country Club in American Fork, Utah
I initially ordered Jacobsen [replacement] bedknives, and JRM is so much cheaper, and they hold up a lot longer too. And with the
Toros [bedknives] that Ive ordered, the price is more competitive, but the quality is much better with JRM.
__________________________________________________________________________________________________
Rex Floyd, service manager, North Ridge Country Club in Raleigh, North Carolina
I have always been a staunch OEM guy, but after touring the JRM factory, I was so impressed with the operation that I had to give the
[DUARANIUM-801] bedknives a shot. To meet Jim (Merritt, JRM, Inc. President/CEO) and witness everything that goes into making
bedknives from the coining process to the way they cut the steel, they look at every aspect of the bedknife to make it better. I see now why
they can boast making a superior product.
__________________________________________________________________________________________________
Dan Lanning, Maintenance Technician, Capital City Club
@ Crabapple and Brookhaven in Georgia
With the JRM bedknives, I can set them up at .120 and get them right out on the course. When I get the mowers back in the shop, I
dont have to do any backlapping. I just grind them up and get them back out on the course. Our superintendent likes to keep our greens
lean and mean. That would be a much tougher task without a JRM bedknife.
www.jrmonline.com email: sales@jrmonline.com USA Toll Free (888) 576-7007 International (336) 354-1243 Fax (336) 354-1255
21