Professional Documents
Culture Documents
SHEAVE/PULLEY ALIGNMENT
Quick, simple and with documentation!
PARAL LEL AND AN GUL AR ARALL ANG ULAR MIS AL IGNMENT ALI
Shows the parallel and angular misalignment, both digitally and graphically in live. Calculates both shim- and adjustment values. Documentation to printer or PC via RS232-interface. Up to 1000 measurements can be stored. Much faster and more accurate than measuring with other, conventional methods. For both horizontal and vertical mounted machines. Magnetic attachment means that the alignment can be made by one operator. Fits on all kinds of sheaves:
A great advantage is that you follow the alignment live at the display, which means that you focus on the adjustment of the machine, not on the sheaves.
PC SOFTWARE INCLUDED
PRINTER CONNECTION
FL AT B EL TS BEL ELTS
TECHNICAL SPECIFICATIONS
Laser transmitter (Part. Nr: 12-0162) and Detector unit (Part. Nr: 12-0164) can also be added separately to e.g. alignment system D525.
Laser transmitter Sheave diameters Sheave thickness Laser aperture Measurement distance Battery type Battery operation Laser class Environment protection Output power Laser wavelength Housing material Dimensions Weight Detector unit Measurement range Housing material Dimensions Weight Display unit Housing material Type of display Displayed resolution 60 mm [2.5] and larger Not depending on sheave thickness 180 10 m [33 feet] radial 1xR14 4 hours continuously 2 IP65 <1 mW 635670 nm Anodized aluminum WxHxD: 300x60x65 mm [12x2 3/8x2 1/2] 1.3 kg [43 oz]
3. Enter the face width for the M-sheave and the S-sheave. The system now automatically compensates for the difference.
4. Place the detector unit vertically according to the display. Adjust the machine according to the values (live, updated in real time). Record the value
5. Place the detector unit horizontally according to the display. Adjust according to the values (live). Record the value
15 mm [5/8] Anodized aluminum WxHxD: 250x50x65 mm [10x2x2 1/2] 600 g [21 oz]
Batteries Operating time Output port Keyboard Memory Data transfer Dimensions Weight Accessories
Anodized aluminum Backlit dot matrix LCD Axial offset 0.1 mm [5 mils] Angular value 0.01/ 0.17 mm/m [0.5 mils/inch] Shim value 0.1 mm [5 mils] 4 pcs. 1.5 V R14 (C) 48 hours RS232 for PC and printer communication Membrane alphanumeric multi function Storage for 1000 alignments PC-program EasyLink for Windows WxHxD: 175x170x40 mm [7x6 3/4x1 1/2] 1250 g [2.7 lbs] Portable thermal printer incl. cable and charger
6. The measurement result is displayed. You can now store, print or transfer the measurement data to a PC.
NEW POSSIBILITIES
With our new SpinLaserTechnology using rotating laser a whole new world of possibilities for the measurement and alignment work are made available. For example the Easy-Laser BTA digital can also be used for dynamic measurements, parallel measurements of planes and shafts etc. The system reads two or more detectors at the same time live, which gives you a direct feedback of your work. This will result in a faster and easier alignment than before.
Manufacturers of belts recommends a maximum angular misalignment of appr. 0.25 (4.4 mm/m) [4.4 mils/inch].
Easy-Laser is manufactured by Damalini AB, bcksgatan 6B, 431 67 Mlndal, Sweden, Phone +46 31 18 87 70, Fax +46 31 18 87 75, email: info@damalini.se, www.damalini.com 2004 Damalini AB. We reserve the right to make modifications without prior notification. Easy-Laser is a registered trademark of Damalini AB. Windows and Excel are registered trademarks of the Microsoft Corporation.
Authorized dealer
05-0148 Rev4