Professional Documents
Culture Documents
Figure 1: Impeller
1.Openfileimpeller_shaft.ipt
Figure 2: Impeller_shaft
Tutorial #
a.Clicktheworkplanetoolonthepartfeaturetoolbar.
Figure 3
b.ExpandtheOriginintheBrowserandclickthedefaultXYplane.
Figure 4
c.Dragthenewworkplanetoanoffsetdistanceof4.25.
Figure 5
Tutorial #
3.ProjectthedefaultY-Axisonthenewworkplane.
Figure 6
c.ClicktheY-AxisintheBrowser.
Figure 7.a
Figure 7.b
a.ClicktheworkplanetoolandselecttheprojectedYAxis.
Figure 8
b.ClickthepreviouslyconstructedWorkPlane1andchangetheangleto24oto createWorkPlane2..
Figure 9.a
Figure 9.b
Figure 10.a
Figure 10.b
Tutorial #
6.TurnthevisibilityofWorkplane1andthepreviouslyconstructedSketchoff.
Figure 11
7.ClicktheLook AtbuttonandclickWorkPlane2.
Figure 12
8.Rotatetheimage90o.
Figure 13
9.EnterSketch Modeandselectworkplane2asasketchplane.
10.RightclickontheworkplaneandSlice Graphics.
Figure 14.b
Figure 14.a
11. Use the Project Geometry tool and project Work Axis 1 and the ZAxis on the workplane.
Figure 15.a
Tutorial #
Figure 15.c
Figure 15.b
Figure 16
Figure 17.a
b.
Figure 17.b
Tutorial #
c.Trim
Figure 17.c
d.
Figure 17.d
10
Figure 17.e
f.ThefollowingshouldbeDrivenDimensions.
Figure 17.f
Tutorial #
11
13. Exit Sketch Mode and Coil the drawn profile about the ZAxis, 1/3 of a revolution toacoilheightof2.923 a.ClicktheCoiltoolontheFeaturetoolbar.
Figure 18
b.Selectthedrawnprofile.
Figure 19
12
c. Select the ZAxis and the proper Direction and Rotation for the required coil shape.
Figure 20
d.ClicktheCoil Sizetabandadjusttheparametersasshownbelow.
Figure 21
Tutorial #
13
e.ClicktheCoil EndstabandselectNaturalStartandEndandclickOK.
Figure 22.a
Figure 22.b
14
Figure 23
15.Constructthe.410diameterholeasshownbelowandexitSketch Mode.
Figure 24
Tutorial #
15
16.CoilandCutthedrawnprofilewiththesameparametersasinstep13.
Figure 25.a
Figure 25.b
16
Figure 26
b. Click the Rotation Axis button, select the ZAxis in the Browser and adjust the requiredparametersasshownbelow.
Figure 27
Tutorial #
17
18.Turnthevisibilityofthe YZplaneon.
Figure 28
Figure 29
20. Use the Project Geometry tool and project Edge 1, the larger diameter portion of theshaft2and3,andtheZAxisonthesketchplane.
Figure 30
18
21.Constructthefollowingsketch.
Figure 31
Figure 32
Tutorial #
19
Bydownloadingthisdocumentyouagreetothefollowing: Educators only may use this material for educational purposes only at an accredited high school or college. As an educator, you may copy this document as many times as you need for your classroom students. You may not distribute, publish, modify, display, email/transmit to others, create other similar works from this document, in any way. Any other use of this documentisstrictlyprohibited.
20