Professional Documents
Culture Documents
142
Function and versatility are key features of all Rittal console systems. Perfect designs for added benets in terms of assembly, safety and operation. Nowhere else are the requirements for versatility, function, aesthetics and ergonomics as high as at the interface between man and machine. The performance capabilities of a machine or system end with the operating unit or console. Perfect packaging of todays sensitive controls and optimum ergonomic conditions create the requirements for ensuring economical operation.
The AP console system, AP one-piece consoles and AP universal consoles all have the following approvals: UL CSA TV Germanischer Lloyd Norske Veritas Russian Maritime Register of Shipping Lloyds Register of Shipping VDE
Application examples of the AP console system in conjunction with the Optipanel CP command panel. See pages 196 onwards for Model No.
Pedestals
Trim panel
Page 158/159
AP one-piece consoles Width Height mm mm 600 960 800 960 1000 960 1200 960
AP one-piece consoles and AP universal consoles of stainless steel, see page 286 289.
AP one-piece consoles, stainless steel Width Height Depth Doors mm mm mm 600 960 400/480 1 800 960 400/480 1 1000 960 400/480 2 1200 960 400/480 2 AP universal consoles Width Height mm mm 600 1300 Depth mm 500 Model No. AP Short front door 2694.600
Model No. AP 2683.600 2684.600 2685.600 2686.600 Model No. AP Tall front door 2695.600 Model No. AP Tall front door 2689.600
Page 166/167
AP universal consoles, stainless steel Width Height Depth Model No. AP mm mm mm Short front door 600 1300 500 2688.600
154
Page 288/289
Rittal Catalogue 30/Enclosure systems
CONSOLE SYSTEMS AP
11
8 10
13
12 s 9 4 3
6 s 7 14
s 1
Universal console
1 Optionally with short or tall door. Short door for reserve panel for installation of a desk section (see photograph) or keyboard drawer. A high level of 4 stability and protection, thanks to a body which is virtually manufactured from a single piece.
Console system
8 Multi-variable combinations see page 156/157. Each component can also be congured individually as well as integrated into the machine or system. 11 Consoles, with mounting plate, in three depths and two heights for almost any mounting situation. Instead of consoles, compact enclosures AK (see page 84) may also be combined with the console system.
One-piece console
12 Variable installation depth in the lid zone and cable entry from the rear with a mounting plate which is heightadjustable by 2 x 40 mm. 14 Door hinge may be swapped from right to left by simply unscrewing the hinges.
Desk section 2 may be installed with either the inclined or straight side at the top, by rotating through 180.
One-piece mounting plate across the entire height, with C-fold at the side, depth-adjustable on a 25 mm pitch pattern. 5
Pedestals, with mounting plate, in two depths, also suitable for use as consoles. 9
13 Lid including perforated strips for cable routing. Safety stay may be unlatched with twohanded operation.
3 Interchangeable cover plates, one fastened with a screw from the outside, the other with a bolt from the inside.
Universal 6 interior installation with partial mounting plates, component shelves, punched sections and rails, due to round and square punchings on a 25 mm pitch pattern. Rear door across 7 the entire height, for unrestricted access from behind.
10 Desk units in two depths with perforated strips in the base and lid for simple conguration.
Console systems AP
Simple selection of your required combination The elements of the AP console system in depths 400 mm (blue) and 500 mm (red) may be combined in numerous userspecic variants, as shown in the diagram. The table opposite allows you to nd the order number for your selection immediately.
Modern, slimline HMI (human/machine interfaces) and displays can also be used. By integrating into the stylish, tailor-made command panel systems VIP 6000 and Optipanel (yellow), this produces a wide range of CP modern extension options for the classic AP console systems. VIP 6000, see page 172 195 Optipanel, see page 196 207 Support arm system CP-L, see page 242 255.
Trim plate (A2/B2) with reinforcement and cutout for CP-L available on request. Screw-fastened from the inside: Enclosure attachment CP 6525.500 Screw-fastened from the outside: Wall/base mounting, small CP 6520.500 Specify the dimensions for positioning on the trim plate and the Model No. of the mounting.
A2
A1 B7 1)2) B2 A6
A5 A6 A4 A4 CP A2 A5 A1 CP A2
B11) A6 B4 A4 A2
A2
A5
A1
A3
A3
B2
B2
CP B2 B4 B1
1)
CP B7
1)2)
B2
B4
B11)
B7 1)2)
B3
B3
1)
CP B2 A2
CP B2
May also be congured with the door at the rear (see diagram opposite). 2) When assembling, additional holes are required on the desk unit.
A1
B11)
A8
156
A9
B8
B9
Rittal Catalogue 30/Enclosure systems
CONSOLE SYSTEMS AP
Combination options for the modules
B4 A6
A4
A3 A2
D = 500 mm Width 800 Model No. 1200 Model No. 1600 Model No. AK enclosure Height mm Width
For further information, see page 158/159. Dimensional drawings, see page 160 163.
D = 400 mm 800 Model No. 1200 Model No. 1600 Model No.
1200
1648.600
1652.600
B7
Console
2647.600
A6
2648.600
2649.600
2662.600
A5
2663.600
2664.600
2614.600
A4
2644.600
2654.600
430
B4
2612.600
2642.600
2652.600
2643.200
2653.200
200
B3
2611.200
2641.200
2651.200
Trim panel
A2
2616.200
2646.200
2656.200
28 Pedestal
B2
2615.200
2645.200
2655.200
2610.600
A1
2640.600
2650.600
670
B1
2600.600
2620.600
2630.600
Base/plinth 2842.200
A9
2852.200
2864.200
200
B9
2902.200
2922.000
2962.200
A8
2841.200
2851.200
2863.200
100
B8
2901.200
2921.200
2961.200 157
Console systems AP
Multi-variable
The components of the AP console system can be combined in many user-specic variants. Modern at screens and operator panels can also be used. By integrating into the stylish, customised command panel systems VIP 6000 and Optipanel, this produces a wide range of modern extension options for the classic AP console systems. Combination options see page 156/157. Protection category: IP 55 to EN 60 529/10.91 Complies with NEMA 12 (provided the appropriate parts are combined). Technical details see page 160 163
s Trim panel
To nish off pedestals, desk units or consoles. Material: Sheet steel 1.5 mm Surface nish: Spray nished in RAL 7032 To t Width mm Depth mm 800 1200 400 1600 800 1200 500 1600 Model No. AP 2615.200 2645.200 2655.200 2616.200 2646.200 2656.200
40
50
120
120
28
To order in primed RAL 7044, please add extension .300 to the Model No. and for RAL 7035 add .500. Delivery times available on request.
21.5
18.5
45
24
20
20
B = Width
s Consoles
Supply includes Enclosure open at bottom Door(s) hinged at the bottom with retaining cords at the front. For depth 500 mm: with door(s) at rear Mounting plate. For depth 500 mm: adjustable on a 25 mm pitch pattern Material Sheet steel 1.5 mm Surface nish Dipcoat primed in RAL 7044, powder-coated on the outside in textured RAL 7032
2.0 mm
3.0 mm
Zinc-plated
Packs of
800
1200
1600 430
800
1200
1600
800
1200 430
1600
800
1200 630
1600
2612.600 2642.600 2652.600 2614.600 2644.600 2654.600 2662.600 2663.600 2664.600 2647.600 2648.600 2649.600
Lock inserts Standard double-bit lock insert may be exchanged for 47 mm lock inserts, type D see page 942 Other accessories from page 876/877 or refer to index. To order primed consoles in RAL 7044, please add extension .800 to the Model No. For RAL 7035, use extension .500. Delivery times available on request.
CONSOLE SYSTEMS AP
s Desk units
Supply includes Enclosure open top and bottom Console lid with cam and support stand Material Sheet steel 1.5 mm 2.0 mm Surface nish Dipcoat primed in RAL 7044, powder-coated on the outside in textured RAL 7032
Width in mm Height in mm Depth in mm Model No. AP Weight (kg) Accessories Aluminium strip AP
Packs of
800
1200
1600 200
800
1200
1600
Page
850 (for depth 400) 1 2611.200 25.5 3 2678.000 2641.200 35.5 2682.000 2651.200 44.0 2613.200 30.6 2678.000
950 (for depth 500) 2643.200 42.6 2682.000 2653.200 52.8 934
Lock inserts Standard double-bit lock insert may be exchanged for 47 mm lock inserts, type D, see page 942 Other accessories from page 876/877 or refer to index. To order primed desk units in RAL 7044, please add extension .300 to the Model No. For RAL 7035, use extension .500. Delivery times available on request.
s Pedestals
Supply includes Enclosure open at top Door or double door with locking rod. For depth 400 mm: front For depth 500 mm: front and rear Gland plates, two-piece Mounting plate. For depth 500 mm: innitely adjustable Material Sheet steel 1.5 mm Surface nish Dipcoat primed in RAL 7044, powder-coated on the outside in textured RAL 7032
2.0 mm
Width in mm Height in mm Depth in mm Model No. AP Doors Weight (kg) Accessories for exterior mounting Base/plinth SO Base/plinth, mobile SO Accessories for interior installation Cable clamp rail Swing frame SR, 11 U Height 100 mm Height 200 mm
Packs of
800
1200
1600 670
800
1200
1600
Page
400 1 2600.600 1 43.5 1 1 1 3 1 2901.200 2902.200 2983.200 2038.200 2027.200 2620.600 2 62.3 2921.200 2922.200 2037.200 2027.200* 2630.600 2 80.0 2961.200 2962.200 2610.600 1 52.2 2841.200 2842.200 2984.200 2038.200 2027.200
500 2640.600 2 75.0 2851.200 2852.200 2037.200 2027.200* 2650.600 2 96.0 2863.200 2864.200 884 884 889 898 1021
Lock systems Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 942 and Ergoform-S lock system see page 939 698 * Two swing frames may be installed Other accessories from page 876/877 or refer to index. To order primed pedestals in RAL 7044, please add extension .800 to the Model No. For RAL 7035, use extension .500. Delivery times available on request. 159 Rittal Catalogue 30/Enclosure systems
Console systems AP
Pedestals
W x H 800 x 670 mm
800 1.5 797 724 1200/1600 1124/1524
W x H 1200/1600 x 670 mm
58
630
630
300
33.5
33.5
50
700
50
50
AP 2600.600 / AP 2610.600
D 400 mm
120 25 50 25 100 12 120
D 400 mm
50
16 50
10
16 50 700 40
10
25
1.5
AP 2600.600
AP 2620.600 / AP 2630.600
D 500 mm
D 500 mm
120
120 24 50 24 100
100 597 (797) 5 595 (795) 1.5 50 16 50 700 40 1100 (1500) 10 25 40 595 (795) 5 597 (797) 10
16 50
10
25
1.5
AP 2610.600
AP 2640.600 / AP 2650.600
12
100
300
CONSOLE SYSTEMS AP
Technical details
D 400 mm
D 500 mm
532
670
600
575
557
472
373
max. 407
120
47.5
70
50
i. L. 340 30 24
50
12.5
i. L. = Clearance width
575
20
90 715/1115/1515
90
20
10.2
40.5
12.5
600
10.2
19 702/1102/1502
101.5
20.5
19
36
532
24
70
557
670
Console systems AP
Desk units
H x D 200 x 850 mm
800/1200/1600 38 120 120 50
Side view
370 270
55.5
12.5
200
19.5
50
41
10.5
850
View in X direction
148.5 148.5 32
i.L. 742/1142/1542 38
32
39
380
H x D 200 x 950 mm
800/1200/1600 100 38 120 120 50
13.4
797/1197/1597
Side view
470 370
55.5
12.5
200
19.5
640/1040/1440 320 420 700/1100/1500 660/1060/1460 50 420 270 758.5 100 820 950
41
10.5
View in X direction
148.5 148.5 32
50 17
Does not apply to AP 2613.200 / AP 2643.200 365 Does not apply to AP 2613.200 25 6.5
39
i. L. = Clearance width
13.4
797/1197/1597
46
125
12 2
460 393
46
125
4
12 2
460 393
CONSOLE SYSTEMS AP
Technical details
Consoles
H x D 430 x 400 mm
317.5 286.5 26
H x D 430 x 500 mm
387.5 356.5 26
View in Y direction
800/1200/1600 797/1197/1597 742/1142/1542
407
353.5
430
325
300
430
350
359
300
X T1
X T1
55.5
300
T2
T2
353.5
407
T3
T3
6.5
42
52.5
50
270 370
11
11
55.5
View in X direction
797/1197/1597 733/1133/1533 32
Depth 400 T1 = vertically hinged 3 U T2 = vertically hinged 6 U T3 = vertically hinged, max. T1 = xed, max. 300 195 110 300
Depth 500
Does not apply to AP 2612.600 / AP 2614.600 AP 2647.600 / AP 2662.600 Only for AP 2649.600 / AP 2652.600 AP 2654.600 / AP 2664.600 422/622 304/504
400
68
View in Z direction
496
607
630 559 500
148.5
52
353.5
430
215
X 400
55.5
146
42
84.5
6.5
6.5
30 50
11
84.5
42
24
146
55.5
348/548
359
300
300
500
407
423.5/623.5
465 500
550
455
99.5
99.5
10
12.5
11.5 9
11.5
11
12.5
11.5
44
t=3
6 19
23
20
90 715/1115/1515
90
20
60
11.5
23
727/1127/1527
348/548
325
350
12.5
23
2.5
Console systems AP
AP 2670.600 / AP 2672.600
B2 B3
AP 2666.600 / AP 2668.600
B2 B3 20
498 447
480
960
675
557 78.5 70 40 40
60 358 368 47 72 47 (87) (127) 50 1.5 B6 B4 B1 B5 B7 1.5 50 1.5 B5 B4 B1 1.5 140 50 270 370 400 78.5
61 16.5 B8 16.5
11
51
11
6.5 498
420
12.5
52.5 31 B2
52.5 31
20
12.5
27.5
F2 F1
Supply includes: Enclosure, closed rear and sides Door or double door, front Console lid, with stay Two-part gland plate Mounting plate.
Width (B1) in mm Height in mm Depth in mm Model No. AP B2 = Width B3 = Clearance width, top B4 = Clearance width, front B5 = Clearance width, bottom B6 = Width of door, left B7 = Width of door, right B8 = Section length of holes F1 = Mounting plate width F2 = Distance between attachment holes Doors Weight (kg) Accessories for external mounting Base/plinth SO Height 100 mm Height 200 mm Mobile base on castors SO Aluminium strip AP Accessories for interior installation Cable clamp rail AS Swing frame SR, 11 U 3 1 2036.200 2038.200 2027.200 1805.200 2027.200 2037.200 2027.200 898 1021 1 1 1 3 2911.200 2912.200 2979.200 2676.000 2901.200 2902.200 2983.200 2678.000 2891.200 2892.200 2682.000 * 2921.200 2922.200 2682.000 884 884 889 934 1 2666.600 597 544 524 500 500 530 475 1 51.5 2668.600 797 744 724 700 700 730 675 1 62.5 Packs of 600 800 960 400/480 2670.600 997 944 924 900 495 497 900 930 875 2 79.5 2672.600 1197 1144 1124 1100 595 597 1100 1130 1075 2 90.0 1000 1200 Page
* To be shortened by 200 mm. To order primed one-piece consoles in RAL 7044, add extension .800 to the Model No. For textured RAL 7035, use extension .500. Delivery times available on request. 164 Rittal Catalogue 30/Enclosure systems
11
780
790
ONE-PIECE CONSOLES AP
Material: Sheet steel Enclosure: 1.5 mm Door and console lid: 2.0 mm Mounting plate: 3.0 mm Surface nish: Enclosure, door and console lid: Dipcoat primed in RAL 7044 and powder coated on the outside in textured RAL 7032 Mounting plate and gland plates: Zinc-plated Protection category: IP 55 to EN 60 529/10.91 Complies with NEMA 12
Lock systems Console lid: Standard double-bit lock insert may be exchanged for 47 mm lock inserts, type D see page 942. Door: Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A see page 942 and Ergoform-S lock system see page 939. One-piece console combined with Optipanel.
One-piece consoles AP
Possible variants
417.5
200
1300
828
660
600
500
697
860
1300
AP 2695.600
Supply includes Enclosure Doors* top, bottom, rear Mounting plate Three-piece gland plates
Surface nish Dipcoat primed in RAL 7044 Powder coated in textured RAL 7032 on the outside Zinc-plated Zinc-plated
AP 2695.600, 2 design strips Aluminium section RAL 5018 Protection category IP 55 to EN 60 529/10.91, complies with NEMA 12 * With short bottom door (AP 2695.600), the drawer or desk section (see page 169) should be tted in order to preserve the protection category.
W x H x D 600 x 1300 x 500 mm Short bottom door Tall bottom door Accessories Base/plinth Base/plinth, mobile Cable clamp rail 180 hinges 100 mm high 200 mm high
735
Page
Cable entry plates PS 4320.700 892 Top door with studs left and right for installing vertical perforated mounting strips SZ 2310.038 and horizontal support strips SZ 2325.000 (see page 950). In terms of interior installation, AP universal consoles are similar to free-standing enclosure ES 5000 in other words, many accessory components with a PS Model No. will t. Lock systems Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 942, and Ergoform-S lock system, see page 939. To order in RAL 7035, please add extension .500 to the Model No. Delivery times available on request. 166 Rittal Catalogue 30/Enclosure systems
aus HB 29, S, 33
UNIVERSAL CONSOLE AP
Mobile PC workstation Plenty of space for tower PCs, printer and paper. Model No. see page 995.
Signal pillars Simple contact thanks to bayonet fastener. Model No. see page 1000.
Desk section For installing display and control components, keyboards etc. Model No. see page 169.
Drawer For mouse and keyboard with a maximum width of 500 mm. Model No. see page 169.
167
Universal console AP
aus EL, S. 62
UNIVERSAL CONSOLE AP
Technical details
Universal console AP 2694.600
600 592 417.5
42.5
Mounting plate
499 24.5 73 48 23 23 23
440
i. L. 515
17 42
173.5
604
i. L. 512
X 44.3
502
25.5
635
1196
365
11
763 25.5
i. L. 512
X 44.3
502
477
805
835
195
170
467 508
358
i. L. 27
195 122 78.5
4.5
36.5
i. L. 532
i. L. 271.5 360
58
70
113
i. L. = Clearance width
Rittal Catalogue 30/Enclosure systems
168
aus EL, S. 63
UNIVERSAL CONSOLE AP
Accessories Drawer
For mouse and keyboard with a maximum width of 500 mm. A high protection level is retained, even with the ap open. Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A (see page 942), and plastic handles, type B (see page 940). Height 200 mm Model No. MC 4757.000
To order in textured RAL 7035, please add extension .500 to the Model No. Delivery times available on request.
Supply includes Built-in enclosure Drawer with telescopic slides Flap with 2 fasteners and 1 scissor-type stay
Surface nish Primed in RAL 7044 Primed in RAL 7044 Spray nished in RAL 7032
Assembly parts for mounting on AP 2694.600 Protection category IP 55 to EN 60 529/10.91, complies with NEMA 12
Desk section
For installing display and control components, plus keyboard, IP 67 mouse and mouse pad. Interchangeable top and bottom cover plates, one fastened with a screw from the outside, one with a bolt from the inside.
Height 200 mm
To order in textured RAL 7035, please add extension .500 to the Model No. Delivery times available on request.
Supply includes Material Surface nish Enclosure Sheet steel 1.5 mm Dipcoat primed in RAL 7044, powder coated in textured RAL 7032 on the outside 2 cover plates Sheet steel 1.5 mm 3 design strips Aluminium RAL 5018 Assembly parts for mounting on AP 2694.600 Protection category IP 55 to EN 60 529/10.91, complies with NEMA 12
Connector gland
for mouse and keyboard cable, see page 1004.
Mounting plate
for universal interior installation, see page 978.
Universal console AP