You are on page 1of 3

Project :

COMPUTATION OF SAFE AXIAL COMPRESSIVE PILE CAPACITY BY STATIC ANALYSIS Analysis in accordance with IS 2911 Part 1 Section 2-1979 Reaffirmed 1997 DMRC CC-30 : Estimation of Pile Capacity for Elevated Corridor of Existing Metro Line for using in settlement analysis

Pile Type :

Bored Cast in Situ RCC Pile

Loading :

Axial Compression

The safe pile capacity is computed as :

Qsafe=(1/FS){1 to n[(c+pktan)AsL]+[(cNc+pNq+0.5D N)Ap]}


where : Qsafe = = =
safe axial pile capacity, Tonnes adhesion factor friction angle between soil and pile, degrees ( = ) cohesion intercept, T/m2 effective density of soil, T/m3 Bearing capacity factors, which are a function of number of layers

FS p L k D As

= = = = = =

Factor of safety overburden pressure, T/m2 Pile segment length in selected layer earth pressure coefficient Pile diameter Pile surface area per m length

c = = Nc , Nq , N =

Ap = = Pile end bearing area n Pile Cross section : Circle Pile cut-off Level (COL) : 2.75 Pile Diameter ,D : 1500 mm 2 4.712 m /m length 1.767 Pile Surface Area, As = Pile cross-section Area, Ap = Overburden Pressure to be considered below : 2.75 m 20 pile diameters, i.e. 30.0 m below 2.8 Consider overburden pressure to i.e. 32.8 m below 0.0 become constant below : 2.75 m Design Water Table Depth: Factor of Safety : as per IS 1904-1986 3.0
(=), degrees
2

m
m2 m m

Layer No.

c, T/m

Depth,m From 0.0 2.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 To 2.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0

Soil Classification
Fill / Made Ground Alluvial Silt Alluvial Silt Alluvial Silt Alluvial Silt Alluvial Silt Alluvial Silt Alluvial Silt Alluvial Silt

, T/m3

k 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

Nc

Nq

1 2 3 4 5 6 7 8 9

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

30 30 30 30 30 30 30 30 30

2.00 2.10 2.10 2.10 2.10 2.10 2.10 2.10 2.10

20.95 20.95 20.95 20.95 20.95

22.40 22.40 22.40 22.40 22.40

Pile Capacity Calculation at following Pile Length(s) below cut-off Level (m)

29.0

34.5

Project :

COMPUTATION OF SAFE AXIAL COMPRESSIVE PILE CAPACITY BY STATIC ANALYSIS Analysis in accordance with IS 2911 Part 1 Section 2-1979 Reaffirmed 1997 DMRC CC-30 : Estimation of Pile Capacity for Elevated Corridor of Existing Metro Line for using in settlement analysis

Pile Type : Pile Dia =


Pile Length below COL, m Depth Below GL , m

Bored Cast in Situ RCC Pile 1500 mm


Skin Friction in Layer Overburden Pressure Unit Skin Friction Soil Parameters
(=), degrees

Loading :
Cumulative Skin Friction Unit End Bearing

Axial Compression Safe Pile Capacity 824 867 934


Total End Bearing

c, 2 T/m

eff,

T/m

Layer No.

T/m 2

T/m 2 Tonnes Tonnes

T/m 2

Tonnes Tonnes Tonnes

0.0 2.0 2.8 5.0 10.0 15.0 20.0 25.0 30.0 31.8 32.8

1 2 0.0 2 2.3 3 7.3 4 12.3 5 17.3 6 22.3 7 27.3 8 29.0 8 30.0 8 0.0 30 1.10 0.0 30 1.10 0.0 30 1.10 0.0 30 1.10 0.0 30 1.10 0.0 30 1.10 0.0 30 1.10 0.0 30 1.10 0.0 30 1.10 0.0 30 0.00
1.24

0.0

0.71 3.02 6.19 9.37

7.6 7.6 71.1 78.7 145.9 224.6 220.7 445.3 740.8 1111.2 1258.5 686.8 1213.6 2472.0 88.3 1346.7 709.8 1254.3 2601.1

2.48
5.23

7.98
10.73

13.48
16.23

18.98
21.73 12.54 295.5

24.48
27.23 15.72 370.4

29.98
30.94 17.86 147.3

31.90
32.45 18.74

33.00
33.00 19.05 202.0

35.0

32.3

33.00

1548.8 709.8 1254.3 2803.1

Ult. Pile Capacity

Project :

COMPUTATION OF SAFE AXIAL COMPRESSIVE PILE CAPACITY BY STATIC ANALYSIS Analysis in accordance with IS 2911 Part 1 Section 2-1979 Reaffirmed 1997 DMRC CC-30 : Estimation of Pile Capacity for Elevated Corridor of Existing Metro Line for using in settlement analysis

Pile Type : Pile Dia =


Pile Length below COL, m Depth Below GL , m

Bored Cast in Situ RCC Pile 1500 mm


Overburde n Pressure Unit Skin Friction Soil Parameters

Loading :
Skin Friction in Layer Cumulative Skin Friction Unit End Bearing

Axial Compression Safe Pile Capacity 934 1002


Total End Bearing

c, T/m

(=), degrees

eff,

T/m

Layer No.

T/m 2

T/m 2 Tonnes Tonnes

T/m 2

Tonnes Tonnes Tonnes

35.0 37.3

32.3 9 34.5 0.0 30 1.10

33.00
33.00 19.05 202.0

1548.8 709.8 1254.3 2803.1 1750.8 709.8 1254.3 3005.1

33.00

Ult. Pile Capacity

You might also like