Professional Documents
Culture Documents
com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
Product catalog
valid starting from 01.11.2008
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
CNC-Multitool Models
Pricelist
valid starting from 01.11.2008
CNC-Styrocut 3D pro
CUT1000S CUT1200S CUT1400S CUT1600S Kit Kit Kit Kit 3D 3D 3D 3D Hotwire Hotwire Hotwire Hotwire Foam Foam Foam Foam cutter cutter cutter cutter
assembling assembling assembling assembling Kit Kit Kit Kit 1813.2216.2922.3326.4415.5343.5746.A A A A A A A
CNC-Mill 3D pro
ML1000F ML1200F ML1400F ML1600F ML1000F ML1200F ML1400F ML1600F RTR RTR RTR RTR 3D 3D 3D 3D 3D 3D 3D 3D Milling Milling Milling Milling Milling Milling Milling Milling machine machine machine machine machine machine machine machine
assembling assembling assembling assembling Ready Ready Ready Ready To To To To Kit Kit Kit Kit set set set set 1813.2216.2922.3326.3527.3931.4637.5040.A A A A A A A A
Power supplies
NET1005 NET1006 NET1006 Power supply 0 - 60V/ 5A Power supply 0 - 60V/ 10A Power supply 0 - 60V/ 15A Input 220V Input 220V Input 220V
200.301.401.C C C
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
CNC-Multitool Models
Pricelist
valid starting from 01.10.2008
Software
Soft001 DeskCNC Software + SPS-Controller Full version
429.C
Electronic
ELE010 Scan001 ELE001 ELE003 ELE003 StepperControl, 1/16 Step Chopper 3D probe TP-100 2-channels Relais board 220V/10A Reference switches styro Reference switches mill
power supply included ready to run ready to run 502.331.200.35.35.A C C C C
Accessories
TT450S TT900S Z2111 Z2112 SDR035 SDR050 SPF002 SPF002 Z2001 Z2002 Z2003 KRE1050 KRE8003 KRE8001 KRE8002 KRE8002 HM001 HM003 FRA001 FRA004 FRS001 FRS002 FRS003 FRS004 HSS001 HSS002 CNC - Turntable Styro, d450mm CNC - Turntable Styro, d900mm Shapeable wire Set Multiwire arms Cutting wire 0.35mm Cutting wire 0.50mm Spring hard, 2D parallel Spring soft, 3D tapered cuts CNC - Rotary table Mill 4-jaw chuck 80mm 3-jaw chuck 80mm Kress router, 1050W Kress Clamping nut Kress clamp, 3 mm Kress clamp, 6 mm Kress clamp, 10 mm Multitool Engraving mat Multitool Engraving mat Burr for PVC, single blade set Burr for alu, single blade set Burr set universal Burr set universal Burr set universal Engraving burr set HSS-Drill set HSS-Drill set
ready to run ready to run ready to run 1309.1611.976.86.45.45.42.43.1309.200.200.170.23.28.28.28.C C
C C C C C C C C C C C C C C C C C C C C C C
FME 1050
200x300mm 400x600mm 1.5mm, 2mm, 3mm 1.5mm, 2mm, 3mm VHM 1.0mm, 4-teilig VHM 2.4mm, 4-teilig VHM 3.0mm, 4-teilig VHM 3.0mm, 4-teilig 0.3 - 0.9mm 1.3 - 1.6/1.8/2.0/2.2mm
90.251.79.79.79.19.19.19.19.19.-
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
highlights
we can 3D - all axes can be driven separately to do 3D tapered cuts as e.g. cones. we are flexible - place the units freely on your working table to have a flexible cutting wire length from 0.3m (0.1') of up to 3m (10'). we have arms - mount multiwire arms to your machine and cut with 2+ wires at the same time even in 3D. we can mill - convert your foam cutting machine into a a full 3D foam milling machine within a couple of minutes.
application
Advertisement (letters, logos) Moulding (stucco border, borders), Packaging technique Modeling (architecture), Insulating technique (plates, pipes), Wing design (RC hobby).
CNC
2D
3D
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
Kit
-
all metal parts, shafts, ACME threaded screws and nuts, high precision bearings, screws, nuts, washers, motor couplers, Cutting wire, tension spring, assembly tools, 1/16 microsteps stepperboard with power supply, steppers, casing, motor wires, Heavy-duty electronics, cutting software 30 days trial version, assembly instruction, operating instructions.
The enclosed assembly instruction describes the assembly in easy to follow steps and takes about 10 hours. Some easy soldering is necessary.
RTR Set
delivery details
- machine kit assembled and tested, mounted on machine frame, - no soldering, The enclosed instruction describes the start in easy to follow steps and takes about 30 min.
Accessories needed:
- power supply for the cutting wire, - DeskCNC software pack with SPS controller assembled (recomended).
technical data
Width (Wire length) max. Machine size X,Y - axis Working area X,Y - axis Number of steppers Drive X,Y - axis Shafts X,Y - axis Lead screws X - axes Lead screws Y - axes Speed max. ** Dissolution of steps max. Precision Weight mm mm mm Ncm mm
CUT 1000S
1600 1080x870 715x605 4 90/32 20/16 TR12x3 TR10x3 1000 1/16 0.1 45
CUT 1200S
2000 1280x870 915x605 4 130/32 20/16 TR12x3 TR10x3 1000 1/16 0.1 50
CUT 1400S
2000 1480x1070 1115x755 4 130/90 20/20 TR12x3 TR12x3 1000 1/16 0.1 55
CUT 1600S
2500 1680x1270 1315x955 4 130/90 20/20 TR12x3 TR12x3 1000 1/16 0.1 65
mm/min Steps mm kg
RTR price incl. 20% Vat Kit price incl. 20% Vat
No responsibility for mistakes and missprint.
4415.2216.-
5343.2922.-
5746.3326.-
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
highlights
To increase the productivity, two or more turntables can be used parallel. This will speed up production and allows higher output. In combination with our Shapeable Wire Set the turntable becomes an advanced Lathe with endless possibilities. We have customers, cutting solid half balls with a diameter of up to 1.300mm with the CUT1600S and our turntable.
application
Advertisement (3D objects) Moulding (stucco border, borders), Packaging technique Modeling (architecture, RC hobby), Insulating technique (pipes).
CNC
2 D
3 D
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
RTR Set
-
turntable assembled and tested, no soldering, 1/16 step stepperboard, stepper, Heavy-duty electronics, DeskCNC control unit.
The enclosed instruction describes the start in easy to follow steps and takes about 30 min.
technical data
Turntable size LxW Turntable hight Turntable disk Number of steppers Drive Dissolution of steps Speed max. ** Precision Weight mm mm mm Ncm Steps mm/min mm kg
TT 450S
400x400 150 d450 1 350 1/16 1000 0.1 15
TT 900S
800x800 150 d900 1 350 1/16 1000 0.1 20
1309.-
1611.-
** with DeskCNC
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
highlights
Just bent the wire as needed, mount it to the shapeable wire tool and start making precise 3D cuts as e.g. spheres.
application
Moulding (stucco border, borders), Packaging technique Modeling (architecture, RC hobby), Insulating technique (plates, pipes),
CNC
2D
3D
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
RTR Set
-
shapable wire arm with quick mounts, 10m wire included, no soldering, Heavy-duty electronics, power supply,
The enclosed instruction describes the start in easy to follow steps and takes about 30 min.
976.-
** with DeskCNC
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
highlights
we have power - our converted machines are 100% milling machines. Their power and strength is comparable with the rest of the market only that ours can convert. we can 3D - the converted milling machine allows the user to cut any kind of threedimensional figure out of EPS, XPS, EPP, plastic, wood, carbon fibre, soft metalls as brass, copper, etc.
application
Advertising (milling, engraving, cutting) Relief milling (coins, medallien, embossing), Engraving (signs, cups), Industrial engraving (vehicle identification plates, labels, warnings), Electronics (printed circuit boards, front plates, switchgear cabinet inscription), Model construction (architecture, hobby), Decoration engraving (rings), lathe milling etc.
CNC
2D
3D
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
Kit
-
all metal parts, shafts, ACME threaded screws and nuts, high precision bearings, screws, nuts, washers, motor couplers, assembly tools, steppers, motor wires, assembly instruction, operating instructions.
The enclosed assembly instruction describes the assembly in easy to follow steps and takes about 2-3 hours. Some easy soldering is necessary. Accessories needed: - Kress spindle with milling tools - CNC Styrocut 3D pro model
technical data
Machine size Y, Z - axis Working area Y - axis Stroke Z - axis Number of steppers Drive Y, Z - axis Shafts Y, Z - axis Lead screws Y - axes Lead screws Z - axes Precision Weight mm mm mm Ncm mm
MT 800F
660x460 405 85 (205) 2 32/26 20/16 TR12x3 TR10x3 0.05 10
MT 1000F
860x460 605 85 (205) 2 130/32 20/16 TR12x3 TR10x3 0.05 12
MT 1200F
1080x460 715 85 (205) 2 130/32 20/16 TR12x3 TR 10x3 0.05 15
MT 1400F
1280x460 915 85 (205) 2 130/32 20/16 TR12x3 TR 10x3 0.05 20
mm kg
603.-
704.-
805.-
906.-
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
highlights
we have power - our machines are 100% working machines. Their power and strength is comparable with any other machine on the market only that ours can convert. we can convert - into a a full 3D hot wire foam cutting machine within a couple of minutes. we can 3D - our milling machine allows the user to cut any kind of three-dimensional figures out of EPS, XPS, EPP, plastic, wood, carbon fibre, soft metalls as brass, copper, etc.
application
Advertising (milling, engraving, cutting) Relief milling (coins, medallien, embossing), Engraving (signs, cups), Industrial engraving (vehicle identification plates, labels, warnings), Electronics (printed circuit boards, front plates, cabinet inscription), Model construction (architecture, hobby, RC), Precision mechanics, Decoration engraving (rings), etc.
CNC
2D
3D
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
Kit
-
all metal parts, shafts, ACME threaded screws and nuts, high precision bearings, screws, nuts, washers, motor couplers, Cutting wire, tension spring, assembly tools, 1/16 microsteps stepperboard with power supply, steppers, casing, motor wires, Heavy-duty electronics, assembly instruction, operating instructions.
The enclosed assembly instruction describes the assembly in easy to follow steps and takes about 10 hours. Some easy soldering is necessary.
RTR Set
delivery details
- machine kit assembled and tested, mounted on machine frame, - no soldering, The enclosed instruction describes the start in easy to follow steps and takes about 30 min.
accessories needed
- Kress spindle, clamps 3/6/8/10mm, clamping nut, - DeskCNC software pack, SPS controller assembled.
technical data
Machine size X,Y - axis Working area X,Y - axis Stroke Z-axis ()* Number of steppers Drive X,Y,Z - axis Shafts X,Y,Z - axis Lead screws X,Y - axis Lead screws Z - axis Speed max. ** Dissolution of steps max. Precision Weight Milling spindel min. mm mm mm Ncm mm
ML 1000F
1080x870 715x515 85 (205) 4 90/90/32 20/20/16 TR12x3 TR10x3 1200 1/16 0.015 28 800
ML 1200F
1280x1070 915x715 85 (205) 4 130/130/32 20/20/16 TR12x3 TR10x3 1200 1/16 0.015 32 800
ML 1400F
1480x1070 1115x715 85 (205) 4 130/130/32 20/20/16 TR12x3 TR10x3 1000 1/16 0.015 35 800
ML 1600F
1680x1070 1315x715 85 (205) 4 130/130/32 20/20/16 TR12x3 TR10x3 1000 1/16 0.015 40 800
mm/min Steps mm kg
RTR price incl. 20% Vat Kit price incl. 20% Vat
No responsibility for mistakes and missprint.
3931.2216.-
4637.2922.-
5040.3326.-
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
highlights
we can 3D - all axes can be driven separately to do 3D tapered cuts as e.g. cones. we are flexible -place the units freely on your working table to have a flexible cutting wire length from 0.3m (0.1') of up to 3m (10'). we have arms - mount multiwire arms to your machine and cut with 2+ wires at the same time even in 3D.
application
Advertisement (letters, llogos) Moulding (stucco border, borders), Packaging technique Modeling (architecture, RC hobby), Insulating technique (plates, pipes), Wing design.
CNC
2D
3D
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
Kit
-
all metal Parts, Shafts, ACME threaded screws and nuts, high precision bearings, Screws, nuts, washers, motor couplers, Cutting wire, tension spring, assembly tools, steppers, motor wires, Assembly instruction, operating instructions.
The enclosed assembly instruction describes the assembly in easy to follow steps and takes about 2-3 hours. Some easy soldering is necessary.
Accessories needed:
- power supply for the cutting wire, min. 0-60V/ 5A, - CNC mill 3D pro model.
technical data
Width (Wire length) max. Machine size Y - axis Working area Y - axis Number of steppers Drive Y - axis Shafts Y - axis Lead screws X - axes Precision Weight mm mm mm Ncm mm mm kg
MT 800SC
1600 860 755 2 90 20 TR12x3 0.1 9
MT 1000SC
2000 1060 955 2 90 20 TR12x3 0.1 12
MT 1200SC M T1400SC
2000 1260 1155 2 90 20 TR12x3 0.1 15 2500 1460 1355 2 90 20 TR12x3 0.1 18
603.-
704.-
805.-
906.-
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
highlights
we have power - these machines are 100% milling machine with the power and strength of comparable machines on the market only that they have a much bigger portal. we can 3D - our milling machines allow the user to cut any kind of three-dimensional figures out of EPS, XPS, EPP, plastic, wood, carbon fibre, soft metalls as brass, copper, etc. we have portal - mill big sized objects out of foam or any other soft material. There is no comparable machine on the market today.
application
3D form milling (3D objects, rotation, lathe) Relief milling (coins, medallien, embossing), Engraving (signs, cups), Industrial engraving (vehicle identification plates, labels, warnings), Electronics (printed circuit boards, front plates, cabinet inscription), Model construction (architecture, hobby, RC), Precision mechanics, Decoration engraving (rings), lathe milling.
CNC
2D
3D
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
Kit
-
all metal parts, shafts, ACME threaded screws and nuts, high precision bearings, screws, nuts, washers, motor couplers, Cutting wire, tension spring, assembly tools, 1/16 microsteps stepperboard with power supply, steppers, casing, motor wires, Heavy-duty electronics, assembly instruction, operating instructions.
The enclosed assembly instruction describes the assembly in easy to follow steps and takes about 10 hours. Some easy soldering is necessary.
RTR Set
delivery details
- machine kit assembled and tested, mounted on machine frame, - no soldering, The enclosed instruction describes the start in easy to follow steps and takes about 30 min.
accessories needed
- Kress spindle, clamps 3/6/8/10mm, clamping nut, - DeskCNC software pack, SPS controller assembled.
technical data
Machine size X,Y - axis Working area X,Y - axis Stroke Z-axis ()* Number of steppers Drive X,Y,Z - axis Shafts X,Y,Z - axis Lead screws X,Y - axis Lead screws Z - axis Speed max. ** Dissolution of steps max. Precision Weight Milling spindel min. mm mm mm Ncm mm
SC 1000F
1080x1080 715x515 515 5 130/130/90 20/20/20 TR12x3 TR12x3 1200 1/16 0.015 45 800
SC 1200F
1280x1280 915x915 715 5 130/130/90 20/20/20 TR12x3 TR12x3 1200 1/16 0.015 50 800
SC 1400F
1480x1480 1115x1115 915 5 130/130/90 20/20/20 TR12x3 TR12x3 1000 1/16 0.015 55 800
SC 1600F
1680x1480 1315x1115 915 5 130/130/90 20/20/20 TR12x3 TR12x3 1000 1/16 0.015 65 800
mm/min Steps mm kg
RTR price incl. 20% Vat Kit price incl. 20% Vat
No responsibility for mistakes and missprint.
4385.---
4919.---
5645.---
6149.---
** with DeskCNC
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
accessories
3D scanner TP-100
The TP-100 in combination with the software DeskCNC allows you to cnc scan any 3D surfaces and to create machinable 3D .Stl files. These 3D .stl files can be milled instantly or be worked on in any 3D CAD program.
highlights
easy to convert from a contact probe to a tool setter. Probe is 5 way triggered and has a long-wearing .079" (2 mm) diameter, ruby tip. Rated for 10,000,000 points at 20,000 points per hour when used with DeskCNC software. Automatic tool length measurement and setting. Easy to convert from contact probe to tool setter. Tool setter has hardened and ground, tool steel contact surface. DeskCNC software comes ready for the probe and tool length setting. Works with other Controllers that have probe input capabilities such as e.g. Mach2. 1.8m shielded cable included.
delivery details
- Probe ready to use, 2mm tip, manual, - Certificate of accuracy (Roundness less than .025mm error, Diameter less than .025mm error, Repeatability deviation less than .025mm), - conversion set to the tool setter,
331.-
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
accessories
Multitool Mat
Multitool Mat is the innovative self-adhesive mat for all milling and engraving work. The mat is only 3 mm thick, flexible and very strong. Just place it on the machine table. No double tape, vacuum or clamping is necessary. There is no better, simpler or faster way to hold your milling and engraving work. Even on T-slot-plates a secure adhesion is guaranteed. Washable and usable again and again. Perfect to do all kind of sign engraving with e.g. a Kress, Dremel or Proxxon machine.
HM002 400x600x3
90.-
251.-
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
software
basics
one for all - DeskCNC can be used for our cnc-styrocut and foam milling machines. No other software is needed to contol the machines. DeskCNC was manufactured to run up to 4 axes at the same time. The fourth axis can either be a round axis or a linear axis. DeskCNC has a CAM mode, G-Code Editor and a machine mode.
highlights
foam cutting - in the CAM mode you can open, scale, rotate and move any DXF, HPGL or PLT file. You can change the cutting direction and the start and exit point. After you generated the cutting path save it as a ISO-G-CODE file. The cutting gap can be set and will be calculated by DeskCNC automaticly. The cutting file can be cut directly in the machine mode or it can be edited in the G-Code Editor. milling - in the CAM mode you can open, scale, rotate and move any DXF, HPGL or PLT file. You can change the milling direction of any region and choose the milling mode. After you generated the milling path save it as a ISO-G-CODE file. The milling file can be executed directly in the machine mode or it can be edited in the G-Code Editor. The following milling modes are available: - Contour milling, - Pocket milling, - 3D milling, - Engraving, Other functions: - 3D scanning with the optional available TP-100 3D Scanner, - Picture to milling convertion, - PCB milling, - Rings engraving with the 4D rotary table.
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
software
highlights
highlights - Machine your part directly from Windows - Runs smoothly on windows (XP recommanded). - Toolpath updated in real time and in 3D. - Fast Block Processing (over 300 Blocks/Sec). - True Linear Acceleration Ramp (programmable) - True 3 axis interpolation. - Continuous Motion Contouring. - up to 8 outputs, - PWM output for the heating wire controll. - 3D ISO-GCode Editor. - file support: DXF, Hpgl, PLT.
429.-
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
Styrospray 1000
basics - Polystyrene (EPS) is not UV stable and sensitive.
For a lasting and durable indoor and outdoor use polystyrene (EPS) must be coated.
the best solution - styrospray is a polyurethane (PU) coating system. It is solvent free,
impact resistant and can be applied in any thickness. Styrospray is the best and easiest polyurethane system on the market to work with.
processing - don't even get started with the polyurethane high pressure spraying machines.
Save your money and your time. Styrospray consists of an A- and B-component and is mixed in a ratio of 1:1 by volume. It can be brushed, rolled and even be air sprayed. After about 15-20 minutes the styrospray layer is dry by the touch and the next layer can be applied. This technik allows any thickness. (how to)
the clever system - the pot time of styrospray is several days. Premixed styrospray can be
used for days. You can interrupt your work anytime - take a break and continue next day. Forget the times where premixed unused material has to be thrown away .
samples:
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com
www.cnc-multitool.com
www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com www.cnc-multitool.com
Styrospray 1000
Styrospray 1000 advantages
easy to use. can be brushed, rolled, sprayed, poured, no expensive high pressure equipment necessary, provides hard shell coating for added strength, 100% solid, no VOC, pressure pot or airless spray equipment for quantity users, premixed material does not cure in the pot even after days,
Processing
brushing and rolling - put the material in the mixing tank at a ratio of 1:1 by volume mix - apply the material by brush or roll - do as many layers as you want - interrupt your work at any time for hours or even days - premixed material does not cure even after days Spraying - put the material in the spraying tank at a ratio of 1:1 by volume mix - Spray the material - do as many layers as you want - interrupt your work at any time for hours or even days - premixed material does not cure even after days - no hazzle to clean the pressure pot and in the spray gun
2295.-
7.5 L Pressure Pot modified 18.9 L (20kg) Styrospray 10000 3.78 L (4kg) Styroprime
Styrospray 1000, 18.9 Liter (20kg) Styrospray 1000, 37.8 Liter (40kg) Styroprime, 18.9 Liter (20kg)
384,768.220.-
D-98693 Ilmenau *
Germany
team_uk@cnc-multitool.com