You are on page 1of 19

Tabular summary of Guide Formulations

No.
A 0494 A 0495 A 0496 A 0493 A 0497 A 0533 A 0534 A 0498 A 0499 A 0500 A 0503 A 0504 A 0505 A 0506 A 0507 A 0508 A 0062 A 0510

Title
Interior paint (splashless, solvent-free) Solid paint (solvent-free) Exterior paint Silicone resin paint Tinter Powder paint (for exterior application) Powder Paint (for interior application) Silicate paint Limewash paint Cement paint Paint-stripping paste on methylene chloride/ethanol Distemper Glazes Emulsion-based Plaster (scratched texture 2,5 mm) Emulsion based tile adhesive Emulsion based adhesive (filled) Gloss effect top coat Ready-mixed joint filler

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Interior paint (splashless, solvent-free)


Guide Formulation A 0494 Version: 01 (02/2006)

Ingredients Water Preservative Dispersant, phosphate Dispersant, acrylate Defoamer Tylose MH 2000 YP2 Titanium dioxide Calcite, 5 m Calcite, 0,9 m Kaolin, 1,1 m pH-regulator Emulsion (VAc/E)

Prozentteile Parts by Weight By percent 296,0 2,0 1,0 2,0 3,0 5,0 75,0 420,0 50,0 25,0 1,0 120,0 1000,0 29,6 0,2 0,1 0,2 0,3 0,5 7,5 42,0 5,0 2,5 0,1 12,0 100,0%

Pigment volume concentration -PVC- [%]: Solid content [%]: Density 20 C [g/cm]: DIN 53778:

76 60 1,7 W-M

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Solid paint (solvent-free)


Guide Formulation A 0495 Version: 01 (02/2006)

Ingredients Water Dispersant, phosphate Dispersant, acrylate Preservative Defoamer Tylose H 6000 YP2 Titanium dioxide synth. Calcium carbonate, 0,28 m Kaolin, 1,1 m Calcite, 2,5 m pH-regulator Emulsion (VAc/E) Thickener

Prozentteile Parts by Weight By percent 369,0 2,0 5,0 2,0 4,0 6,0 175,0 75,0 75,0 125,0 2,0 150,0 10,0 1000,0 36,9 0,2 0,5 0,2 0,4 0,6 17,5 7,5 7,5 12,5 0,2 15,0 1,0 100,0%

Pigment volume concentration -PVC- [%]: Solid content [%]: Density 20 C [g/cm]: DIN 53778:

66 53 1,4 W-M

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Exterior paint
Guide Formulation A 0496 Version: 01 (02/2006)

Ingredients Water Preservative Dispersant, phosphate Dispersant, acrylate Defoamer Titanium dioxide Kaolin, 1,1 m Calcite, 2,5 m Talc, 2,5 m Tylose H 30000 YP2 BDGA Solvent pH-regulator Emulsion (VAc/VeoVa)

Prozentteile Parts by Weight By percent 170,0 2,0 1,0 3,0 4,0 200,0 30,0 200,0 40,0 2,5 7,5 10,0 5,0 325,0 1000,0 17,0 0,2 0,1 0,3 0,4 20,0 3,0 20,0 4,0 0,3 0,8 1,0 0,5 32,5 100,0%

Pigment volume concentration -PVC- [%]: Density 20 C [g/cm]: Brightness [%]: Hiding power [%]:

48 1,4 91,4 99,2

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Silicone resin paint


Guide Formulation A 0493 Version: 02 (06/2009)

Ingredients Water Dispersant, phosphate Dispersant, acrylate Preservative Defoamer Tylose MH 30000 YG8 Titanium dioxide Calcite, 5 m Calcite, 10 m Mica/chlorite/quartz, 13 m Talc, 6 m pH-regulator BDGA Solvent Emulsion (S/A) Silicone resin Water repellent agent

Prozentteile Parts by Weight By percent 213,0 1,0 2,0 2,0 3,0 3,0 120,0 245,0 100,0 50,0 50,0 1,0 5,0 5,0 100,0 90,0 10,0 1000,0 21,3 0,1 0,2 0,2 0,3 0,3 12,0 24,5 10,0 5,0 5,0 0,1 0,5 0,5 10,0 9,0 1,0 100,0%

Pigment volume concentration -PVC- [%]: Solid content [%]: Density 20 C [g/cm]: Water absorption W24 [kg/(m SQR(24h))]: Vapor permeability Sd [m]:

67 66 1,6 <0,2 <0,1

The paint is suitable as on top coat for interior and exterior application on reconstruction renders, according to WTA (Wissenschaftlich-Technischer Arbeitskreis / Germany).

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Tinter
Guide Formulation A 0497 Version: 01 (02/2006)

Ingredients Water Preservative Dispersant, phosphate Surfactant Defoamer Kaolin, 1,1 m Aluminum silicate, 5,5 m Titanium dioxide Calcite, 10 m Calcite, 6 m Tylose H 6000 YP2 BDGA Solvent pH-regulator Emulsion (VAc/E/Vc) Pigment preparation

Prozentteile Parts by Weight By percent 206,5 2,0 2,5 5,0 4,0 25,0 10,0 275,0 275,0 100,0 2,5 5,0 8,0 2,0 320,0 2,5 1245,0 16,6 0,2 0,2 0,4 0,3 2,0 0,8 22,1 22,1 8,0 0,2 0,4 0,6 0,2 25,7 0,2 100,0%

Pigment volume concentration -PVC- [%]: Solid content [%]: Density 20 C [g/cm]:

49 59 1,4

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Powder paint (for exterior application)


Guide Formulation A 0533 Version: 01 (01/2008)

Ingredients Emulsion powder Tylose MH 6000 YP4 Cellulosic fibre Film forming agent Defoamer Dispersant, phosphate Calcite, 10 m Calcite, 2,5 m Talc, 10 mm Titanium dioxide Lime hydrate

Prozentteile Parts by Weight By percent 230,0 5,0 55,0 35,0 4,0 3,0 324,0 140,0 90,0 110,0 4,0 1000,0 23,0 0,5 5,5 3,5 0,4 0,3 32,4 14,0 9,0 11,0 0,4 100,0%

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Powder Paint (for interior application)


Guide Formulation A 0534 Version: 01 (01/2008)

Ingredients Emulsion powder Tylose MH 6000 YP4 Cellulosic fibre Film forming agent Defoamer Dispersant, phosphate Talc, 5 m Calcite, 0,9 m Calcite, 2,5 m Calcite, 1 m Titanium dioxide Lime hydrate

Prozentteile Parts by Weight By percent 127,0 5,0 80,0 19,0 4,0 2,5 230,0 200,0 130,0 100,0 100,0 2,5 1000,0 12,7 0,5 8,0 1,9 0,4 0,3 23,0 20,0 13,0 10,0 10,0 0,3 100,0%

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Silicate paint
Guide Formulation A 0498 Version: 01 (02/2006)

Ingredients Water Tylose H 15000 YP2 Titanium dioxide Dispersant, acrylate Stabilizer Defoamer Calcite, 0,44 m Treated calcite, 5,5 m Talc/dolomite, 5 m Emulsion (S/A) Potassium silicate Solvent Stabilizer

Prozentteile Parts by Weight By percent 262,0 2,0 50,0 4,0 5,0 2,0 200,0 100,0 75,0 65,0 215,0 10,0 10,0 1000,0 26,2 0,2 5,0 0,4 0,5 0,2 20,0 10,0 7,5 6,5 21,5 1,0 1,0 100,0%

Solid content [%]: Density 20 C [g/cm]:

52 1,5

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Limewash paint
Guide Formulation A 0499 Version: 01 (02/2006)

Ingredients Water Preservative Defoamer Tylose MH 2000 YP2 Dispersant, acrylate Emulsion (VAc/VeoVa) Titanium dioxide Calcite, 12 m Lime water mixture 1 : 1

Prozentteile Parts by Weight By percent 160,0 2,0 1,5 5,0 1,5 65,0 75,0 225,0 500,0 1035,0 15,5 0,2 0,1 0,5 0,1 6,3 7,2 21,7 48,3 100,0%

Solid content [%]:

40

Optional up to 1 % of a film preservation additive Mergal S 89 can be added. To improve weathering performance for application of the top layer up to 2 % of hydrophobing agent Bautenschutzmittel BSR 50 can be added.

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Cement paint
Guide Formulation A 0500 Version: 01 (02/2006)

Ingredients White cement Lime hydrate Calcite, 5 m Titanium dioxide Water repellent agent Emulsion powder (VAc/VeoVa) Defoamer Tylose MH 2000 YP2

Prozentteile Parts by Weight By percent 200,0 400,0 400,0 25,0 12,0 50,0 2,0 6,0 1095,0 18,3 36,5 36,5 2,3 1,1 4,6 0,2 0,5 100,0%

Mixing ratio: 0.8 - 1.0 l water on 1 kg dry powder

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Paint-stripping paste on methylene chloride/ethanol


Guide Formulation A 0503 Version: 01 (02/2006)

Ingredients Methylene chloride Paraffin (50 - 55 C)-solution (20 %) [1] Surfactant Tylose MB 60000 P2 Ethanol Solvent Natriumbenzoat-solution (20 %) [2]

Prozentteile Parts by Weight By percent 775,0 25,0 25,0 15,0 100,0 50,0 10,0 1000,0 77,5 2,5 2,5 1,5 10,0 5,0 1,0 100,0%

[1] dissolve 1 p.b.w. Paraffin at approx. 60 C in 4 p.b.w. Toluol [2] dissolve 1 p.b.w. Natriumbenzoat in 4 p.b.w. water/ethanol 1 : 1

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Distemper
Guide Formulation A 0504 Version: 01 (02/2006)

Ingredients Water Preservative Dispersant, phosphate Defoamer Chalk, 2,3 m Titanium dioxide Calcite, 1,6 m Calcite, 5 m Tylose MH 200 YP2 Emulsion (S/A) Solvent pH-regulator

Prozentteile Parts by Weight By percent 350,0 2,0 1,5 2,5 300,0 25,0 75,0 200,0 10,0 30,0 3,0 1,0 1000,0 35,0 0,2 0,2 0,3 30,0 2,5 7,5 20,0 1,0 3,0 0,3 0,1 100,0%

Pigment volume concentration -PVC- [%]: Solid content [%]: Density 20 C [g/cm]: Brightness [%]: Hiding power [%]:

94 62 1,6 86,1 98,6

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Glazes
Guide Formulation A 0505 Version: 01 (02/2006)

Ingredients Water Preservative Tylose H 6000 YP2 Dispersant, acrylate Defoamer Calcite, 2,5 m pH-regulator Emulsion (VAc/VeoVa/A) Emulsion (VAc/E) Wax emulsion

Prozentteile Parts by Weight By percent 401,0 2,0 11,0 2,0 4,0 100,0 4,0 190,0 190,0 96,0 1000,0 40,1 0,2 1,1 0,2 0,4 10,0 0,4 19,0 19,0 9,6 100,0%

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Emulsion-based Plaster (scratched texture 2,5 mm)


Guide Formulation A 0506 Version: 01 (02/2006)

Ingredients Water Preservative Defoamer Tylose HS 15000 YP2 pH-regulator Titanium dioxide Treated calcite, 5,5 m Calcite, 25 m Emulsion (VAc/VeoVa) BDGA Solvent Dolomite granular, 0,3 - 0,7 mm Dolomite granular, 0,7 - 1,2 mm Dolomite granular, 1,8 - 2,5 mm

Prozentteile Parts by Weight By percent 90,0 2,0 2,0 2,0 1,0 50,0 25,0 25,0 160,0 4,0 4,0 450,0 100,0 85,0 1000,0 9,0 0,2 0,2 0,2 0,1 5,0 2,5 2,5 16,0 0,4 0,4 45,0 10,0 8,5 100,0%

Solid content [%]:

82

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Emulsion based tile adhesive


Guide Formulation A 0507 Version: 01 (02/2006)

Ingredients Water Tylose H 30000 YP2 Thickener Preservative Solvent Defoamer Emulsion (S/A) Solvent Calcite, 9 m Calcite, 29 m Calcite, 46 m

Prozentteile Parts by Weight By percent 191,0 5,0 10,0 2,0 12,0 2,0 100,0 8,0 100,0 200,0 370,0 1000,0 19,1 0,5 1,0 0,2 1,2 0,2 10,0 0,8 10,0 20,0 37,0 100,0%

Solid content [%]: Density 20 C [g/cm]: Filler-Binder-Ratio

72 1,7 13,4 : 1

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Emulsion based adhesive (filled)


Guide Formulation A 0508 Version: 02 (06/2008)

Ingredients Water Preservative Dispersant, phosphate Defoamer Dispersant, acrylate Tylose MH 30000 YP4 pH-regulator Calcite, 25 m Calcite, 5 m Emulsion (VAc/E) Solvent

Prozentteile Parts by Weight By percent 220,0 2,0 1,0 2,5 2,5 10,0 2,0 325,0 275,0 150,0 10,0 1000,0 22,0 0,2 0,1 0,3 0,3 1,0 0,2 32,5 27,5 15,0 1,0 100,0%

Solid content [%]: Density 20 C [g/cm]:

68 1,6

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Gloss effect top coat


Guide Formulation A 0062 Version: 03 (06/2009)

Ingredients Water Preservative Dispersant, phosphate Defoamer Dispersant, acrylate Emulsion (pure A) Iron oxide yellow Tylose H 300 NG4 Calcite, 5 m pH-regulator BDGA Plasticizer

Prozentteile Parts by Weight By percent 82,0 2,0 1,0 3,0 2,0 200,0 50,0 3,0 640,0 2,0 10,0 5,0 1000,0 8,2 0,2 0,1 0,3 0,2 20,0 5,0 0,3 64,0 0,2 1,0 0,5 100,0%

Primer and top coat can be mixed with the coloured top coat in any ratio. The primer must be applied in two layers (300 g/m). First layer must be grinded with grinding paper of fineness 150, second layer with paper of fineness 220. The top coat must be applied in two layers. The first layer must be grinded with grinding paper of fineness 500. By variation of force and angle of the trowel the gloss can be varied during application of the final layer. The surface can be finished by polishing, waxing or application of a clear coat.

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

Ready-mixed joint filler


Guide Formulation A 0510 Version: 01 (02/2006)

Ingredients Water Preservative Dispersant, phosphate Defoamer Tylose H 30000 YP2 pH-regulator Emulsion (VAc/E/Vc) Calcite, 12 m Calcite, 2,5 m Mica, 1,2 m Glass bubbles, 35 m Layered silicate

Prozentteile Parts by Weight By percent 329,0 2,0 1,0 3,0 4,0 1,0 50,0 250,0 225,0 75,0 50,0 10,0 1000,0 32,9 0,2 0,1 0,3 0,4 0,1 5,0 25,0 22,5 7,5 5,0 1,0 100,0%

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
SE Tylose GmbH & Co.KG Rheingaustrae 190-196 D-65203 Wiesbaden Tel: +49 611 962-8571 Fax: +49 611 962-9267 www.SETylose.de Info@SETylose.de

You might also like