Professional Documents
Culture Documents
Mechanical specifications
Length Width Depth
4)
BXV-80090/8CF ___
When ordering, replace ___ with connector type.
Radiation-pattern
1)
0.698 m 0.39 m2
Rated Wind Velocity (Safety factor 2.0) >332 km/hr Wind load @ 100 mph (161 km/hr) Front Side 1140 N 665 N 256 lbs 150 lbs >206 mph
Port 3 Vertical
Antenna consisting of aluminum alloy with brass feedlines covered by a UV safe fiberglass radome.
Horizontal
-120 -130 -140 -150 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 35 30 25 20 15 10 5 0 10 20 30 40 130 120 110 100 90 80 70 60 50
Mounting brackets attach to a pipe diameter of 50-160 mm (2.0-6.3 in). Mounting bracket kit #36210002 Downtilt bracket kit #36114003
Electrical specifications
Frequency Range Impedance
3) 1)
806-900 MHz* 50 NE, E-DIN 1.4:1 Vertical Slant 45 < -30 dB < -40 dB 12 dBd 500 W
1)
Isolation Between Ports 45/45 45/Vertical Gain Power Rating Half Power Angle H-Plane E-Plane
Vertical Radiation patterns for all antennas are measured with the antenna mounted on a fiberglass pole. Mounting on a metal pole will typically improve the Front-toBack Ratio.
1) 2) 1)
90 15 0 5% Direct Ground
1) 1)
Watercut brass feedline assembly for consistent performance. Unique feedline design eliminates the need for conventional solder joints in the signal path. A non-collinear system with access to every radiating element for broad bandwidth and superior performance. Air as insulation for virtually no internal signal loss.
*Also available up to 960 MHz. Consult your sales director for more information. Patented Dipole Design: U.S. Patent No. 6,608,600 B2
1) 2) 3)
Every Amphenol Antel antenna is under a fiveyear limited warranty for repair or replacement. Antenna available with center-fed connector only.
Typical Values Power Rating limited by connector only. NE indicates an elongated N Connector. E-DIN indicates an elongated DIN Connector. 4) The antenna weight listed above does not include the bracket weight.
Improvements to mechanical and/or electrical performance of the antenna may be made without notice.
806-960 MHz
Revision Date: 6/3/04
1300 Capital Drive Rockford, IL 61109 Toll-Free (888) 417-9562 Tel. (815) 399-0001 Fax. (815) 399-0156 Email: antel@antelinc.com www.antelinc.com