Professional Documents
Culture Documents
Page 1
Requirements Laptop/PC with LCT Installed FPH with 5.0 Fair knowledge on the Flexi Packet Hub and LCT
Page 2
PHASE :1 The main purpose is to have the ability to create E-TREE services for aggregation sites , for the 1819 SYNC service. This will enable the aggregation port (UNI-SYNC port) to send the same v-lan 1819 to multipoints ( UNI and NNI ports) E-tree services are point-to-multipoint services that are
used to provide IPTV and similar multicast services
The Hub must have the 5.0 software for the above to be possible, please the procedure below if hub is not upgraded.
Upgrading Procedure
Step Task Select one user of the FTP server and copy the new system software image directly from the CD to the FTP home directory of the user. If this is not possible, copy the system software image from the CD to a directory from which the FTP server allows file transfers Verify that the FTP server software is running on the host computer and that the correct software file is loaded Log in to the device connecting by telnet Download the software onto the FPH x200 device.
ftp get image server-ip <server_ip> filename <filename> login <login> password <password> [account <account>] [cd-dir <dir>]
Command
The IP address of the FTP server in the format A.B.C.D. The name of the software image file on the remote server. The file name can contain up to 50 characters.
<filename>
Page 3
<login>
The login name for the FTP server. The login name can contain up to 30 characters. The password for logging on to the FTP server. The password string can contain up to 30 characters The name of the account on the FTP server. The account name can contain up to 30 characters. Default: . The Change directory. The change directory name can contain up to 80 characters. Default: .
<password>
<account>
<dir>
The account and cd-dir arguments are no mandatory and can be omitted if using the FTP home dir of the FTP user
For more information, see the example Download the software to the inactive image bank. 5 The system will download the software file and unpack it into the inactive image bank This could take some minutes, depending of the load of the network between the FTP server and the FPH A2200 Verify that the inactive bank contains the new software version. Toggle the active software bank. Reboot the device with the new software. Log in to the device connecting by telnet After the reboot, verify that the active bank contains the new software version.
show image show image command
configset alternate-image-bank
Type y when you are prompted to confirm the toggling of the active software bank.
10
11
Page 4
Examples
Example of ftp get command:
This example downloads the A2200_V5.0.10.09.i image from an FTP server on 10.20.30.4 using username root and password root:
A-2200> ftp get image server-ip 10.20.30.4 filename A2200_V5.0.10.09.i login root password root
This example shows software version 4.5.23.2 in the active image bank and software version 4.5.23.3 in the inactive image bank:
A-2200> configset alternate-image-bank After this command the system will reboot Run the show image command A-2200>show image BANK A -----------Status -----------Active 5.0.10.09 BANK B -----------Inactive 4.5.23.3
N.B: If this is a new hub it can be upgraded from the commission tool during the first time installation FLEXI PACKET 5.0 GUIDELINES Page 5
There will be a new icon on the left hand side of the hubs menu from LCT The icon is WEB UI (Web Use Interface) Web UI- is a user-friendly, web-based element manager designed to manage the A1200, A1210 and A2200 devices Click on the icon to access the Web UI Web UI can also be accessed by entering ip of the hub on internet explorer.
Page 6
The screen above will appear on the internet explorer. Username : root Password : root
Page 7
Click on SERVICES
Click on E-TREE
From Device management a menu appears on the left. Click on Services from that menu From Service there are two options. Click on Service management On the service type click on: E-TREE
Page 8
AC-NUM: Number of Attachment Circuits ( UNI ports) NVI-NUM: Number of Network VLAN Interfaces (NNI ports) The numbers of the AC and NVI will vary according to the planning. Note that it is possible to have more than one UNI port in one E-Tree service
Page 9
Service ID- Service Identifier. Any number between 51-4094 S-VLAN ID 1819 for Vodafone SYNC (any other value can be used from 51-4094) Leafs-VLAN ID - 1819 for Vodafone SYNC (any other value can be used from 51-4094)
PCS- Per Hop Behaviour Scheduling Class. The Options are EF1,EF2,AF2,AF3
Flooding-bw-profile- same as BW-profile that will be used for the service Click on the creat bw-profile
Page 10
Click on submit
Page 11
AC-type-The Role for the AC (UNI port). Choose between root and Leaf SI-Service Interface-Will change depending on the number of port in the service. I/F- The port/interface on the hub SI-Instance- The instance in the service interface. Ing-bw-profile-Same as BW used on the service Eg-bw-profile- Same as BW used on the service All points marked with * are important and should therefore be filled Click next
Page 12
Depending on the number of interface in the service the SI will change . If the service involves 5 ports the it will have SI 1 up until 5 Si-Instance- will always stay the same through out the service I/F- The next port/Interface in the service N.B : this screen will appear each time you click next depending on the number of port being aggregated to. If its 1 port aggregating to 4 port the screen will appear 4 times. Click Next
Page 13
Click on Enable
Click Finish
Click on enable and then finish A Screen will appear showing that the service has been created If there are any errors on the creation of the service it will show where the errors are If there are errors delete the service and start all the steps again
Page 14
Compiled By: Lerato Dineo Mokgadi Nokia Siemens Care Engineer +27786592055 Ghana:0204939633 dineo.mokgadi@nsn.com
Page 15