Professional Documents
Culture Documents
Page 1 of 3
1. 2.
In the Project Properties, click Calculations > LTE technology. Set the values for LTE transmit power settings. Tx_RE_dlrs: Transmit power per resource element for downlink reference signal (RS) given in dBm. (Default is 0 dBm.) Tx_RE_Offset_pbch: Transmit power offset for physical broadcast channel (PBCH) relative to TX_RE_dlrs given in dB. (Default is 0 dB.) Tx_RE_Offset_ss: Transmit power offset for primary synchronization channel (P-SCH) and secondary synchronization channel (S-SCH) relative to Tx_RE_dlrs given in dB. (Default is 0 dB.) Tx_RE_Offset_pdcch: Transmit power offset for Physical Downlink Control Channel (PDCCH) relative to Tx_RE_dlrs. (Default is 0 dB.) Tx_RE_Offset_pdsch: Transmit power offset for Physical Downlink Shared Channel (PDSCH) relative to Tx_RE_dlrs. (Default is 0 dB.) The above power settings are not independent of each other. The following sets of power checks must be satisfied otherwise a warning message is displayed, and transmit power levels will need to be re-entered. Click here for suggested power level values. Num. OFDM for PDCCH: Number (1, 2, 3) of OFDM symbols reserved for PDCCH in the first slot of the subframe. In the above example, Num. OFDM for PDCCH is set to 1. NOTE These settings can be redefined when you add a system using LTE technology.
3.
When the Apply these default values to all sources of all systems check mark is selected, all the power values in the existing systems are replaced with these values, and these values also become default values for future systems. When this check mark is cleared, these values become default values for future systems only; the existing
LTE Technology
Page 2 of 3
systems keep their values. 4. Click OK to save and close the Project Properties.
System (RF source) power maximum power set at 24 dBm CHANNEL BANDWIDTH [MHz] NUMBER OF RESOURCE BLOCKS NUMBER OF SUBCARRIERS PER RESOURCE BLOCK 12 12 12 12 TOTAL NUMBER OF SUBCARRIERS TOTAL POWER [mW] TOTAL POWER [dBm] POWER PER RE (Tx_RE_dlrs)
5 10 15 20
25 50 75 100
System (RF source) power maximum power set at 43 dBm CHANNEL BANDWIDTH [MHz] NUMBER OF RESOURCE BLOCKS NUMBER OF SUBCARRIERS/ RESOURCE BLOCK 12 12 12 12 TOTAL NUMBER OF SUBCARRIERS TOTAL POWER [W] TOTAL POWER [dBm] POWER PER RE (Tx_RE_dlrs)
5 10 15 20
25 50 75 100
20 20 20 20
System (RF source) power maximum power set at 46 dBm CHANNEL BANDWIDTH [MHz] NUMBER OF RESOURCE BLOCKS NUMBER OF SUBCARRIERS/ RESOURCE BLOCK 12 12 TOTAL NUMBER OF SUBCARRIERS TOTAL POWER [W] TOTAL POWER [dBm] POWER PER RE (Tx_RE_dlrs)
5 10
25 50
300 600
40 40
46.0 46.0
21.2 18.2
LTE Technology
Page 3 of 3
15 20
75 100
12 12
900 1200
40 40
46.0 46.0
16.5 15.2