Professional Documents
Culture Documents
Page 1/5
Q2 Ans
What are the different method used for duct sizing? Equal Friction, Velocity,Static Regain.
Q3
What are the conversion of following? 1CFM= 0.472LPS 1CMH= 0.588CFM 1inch= 25.4mm 1LPS= 15.8GPM
Q4 Ans
Classify the air conditioning Units? Window, Split, Chiller, DX, Package Unit etc.
Q5 Ans
What is the use of strainer? It is installed before the cooling coil to protect dirt & foreign material entering into the cooling coil / evaporator.
Q6
How do you measure & control the noise level in A/C system?
Ans
Noise level can be measured by dB meter.It can be controlled by providing acoustic to the unit panels, if the sound crosses the set noise criteria we have to go for sound attenuatos. What is the use of straircase pressurization? To provide fresh & clean air in the staircase when fire occurs in the floor. The pressurized air keeps the smoke away from the stair wall. It is used for creating positive pressure. What are the recommended pressure drop in Chilled water pipes? 210 PASCAL'S per meter (0.84 inches). Where do you use Fire Damper,Spliter Damper & Non Return Damper? Fire dampers (FD) are used to stop the fire wherever duct passes thro fire wall. . Spliter dampers(SD) are used to split the main duct for propotional air balancing Non Return Dampers(NRD) are used to stop the back flow of air in the duct. NRD's used in exhaust and ventilation system only.
Q7 Ans
Q8 Ans Q9 Ans
Page 2/5
Q10 Ans
What is use of U-Trap and where it is used? It is used in Drain connection as water seals/smell.
Q11 Ans
What are the different types of exhaust fans used to extract the air? Axial type propeller fan, forward curved, twin fan, direct driven centrifugal fan.
Q12 Ans
What are different duct shapes normally used? Rectangular, Round, Spiral, Oval.
Q13 Ans
How do you control vibration of AHU & Chillers? Spring vibration isolators, Rubbers pads, Kinetic Chain, flexible bellows.
Q14 Ans
What is the difference between VAV & CAV? Variable Air Volume & Constant Air Volume
What is the difference betwwen NRV & Check valve? Both are same Mention typical valve arrangement for chiller connection?
Q17 Ans
What do you consider while making plant room layout explain briefly? Space, site orientation, plant room location, A/C unit (ready made or tailor made).
Q18 Ans
What are the different type of Louvers used? Fresh air louvers, sand trap louvers, door louvers, acoustic louvers, supply air and return air louvers.back draft louvers.
Q19 Ans
Q20 Ans
What is the Primary & Secondry pump?Where it is used? Primary Pump Supplies return water to chiller & Secondary Pump supplies supply water from chiller.
Page 3/5
What are the standard test pressure for chilled water piping for Industrial application? Test pressure 1.5 times of working pressure. What is VFD? & Where it is used? Variable Frequency Drive it is used to control the speed of motor by controlling the frequency applied to it. It is used with Chillers,AHU etc.
Name some fine controlled Valves? Needle valve,Spindle valve, regulating valve, motorized valved etc. What are the Securities checking in chillers? Flow switch, Chiller and Pump interlocking, High Pressure cut-out, Oil Pressure switch, High Suction superheat, Anti Freeze.
What are the temperature & RH required for human comfort? 22 2 degree celcius & 50%RH What is Boiling Point temperature of water in Fahrenheit scale? 212 degree Fahrenheit? At what temperature degree Ferhenite & degree Celcius are same? -40C Which gas is used to purge the refrigerant line during the brazing? Nitrogen gas. 1 TR= 365 to 400 CFM 3.7KW
How much design velocity required in the main duct of an office building? 900-1100 FPM What should be the max distance between sewer line & portable water line? 3 meter How much size of clean out is provided for sewer pipe below 10" dia? 6" What should be height of fire cabinet from floor level? 1 meter
Page 4/5
Q34 Ans
What are the different types of sprinkler heads used in fire protection system? Upright sprinkler,Pendent Recessed sprinkler,Pendent sprinkler,Side wall sprinkler,extended side wall sprinker. What is standered for fire protection system? NFPA What is the test pressure for fire fighting pipe network? 1.5 times of working pressure. What is the temperature rating for fire fighting sprinkler head? 170F What is the fire department connection known as? Siamese Name the different types of fire extinguisher? Portable type CO2,Portable type Dry Powder & water. What are the different types of Pump used in fire protection system? Main Pump,Jockey Pump & In case of power failure Diesel driven pump. What are the different types of Valve used in fire protection system? Alarm valve,Zonal valve etc. Who gives final approval to fire fighting network after installation? Civil Defence.
Q35 Ans Q36 Ans Q37 Ans Q38 Ans Q39 Ans Q40 Ans Q41 Ans Q42 Ans
What is the test pressure for domestic water supply pipe? 1.5 times of working pressure. Name the different types of Traps used for Water Closet? P-Trap & S-Trap. What are the different pipe material used in plumbing installation? CI,Acid resistant CI,Bituminous fiber pipe,virtified clay pipe,Lead pipe,Galvanized steel pipe, Galvanized wrought iron pipe,brass pipe,copper pipe,Plastic & synthetic pipe. What are the impotant factor to consider while installing waste pipe? Selection of right kind of material, Conservative use of fittings. Right location of cleanouts Right pitch or slop of pipe line. Manner of joining the pipe.
Q46 Ans
Name Of Candidate Interview on: Passport No: Q1 Ans What are the standards use in A/C duct fabrication?
Page 1/4
Q2 Ans
Q3
What are the conversion of following? 1CFM= LPS 1CMH= CFM 1inch= mm 1LPS= GPM
Q4 Ans
Q5 Ans
Q6
How do you measure & control the noise level in A/C system?
Ans
Q7 Ans
Q8 Ans Q9 Ans
Where do you use Fire Damper,Spliter Damper & Non Return Damper?
Page 2/4
Q10 Ans
Q11 Ans
What are the different types of exhaust fans used to extract the air?
Q12 Ans
Q13 Ans
Q14 Ans
Q17 Ans
What do you consider while making plant room layout explain briefly?
Q18 Ans
Q19 Ans
Q20 Ans
Page 3/4
What are the standard working & test pressure for chilled water piping for Industrial application?
Which gas is used to purge the refrigerant line during the brazing?
1 TR=
CFM KW
How much design velocity required in the main duct of an office building?
What should be the max distance between sewer line & portable water line?
How much size of clean out is provided for sewer pipe below 10" dia?
Page 4/4
Q34
What are the different types of sprinkler heads used in fire protection system?
Q35
Q36
Q37
Q38
Q39
Q40
What are the different types of Pump used in fire protection system?
Q41
What are the different types of Valve used in fire protection system?
Q42
Q43
Q44
Q45
Q46
What are the impotant factor to consider while installing waste pipe?