Professional Documents
Culture Documents
GL-E1103 THERMOSTAT
April 2012
Revision IE
Software version 1.1
SUMMARY
GL-E1103 THERMOSTAT..........................................................................................................1
Def..................................................................................................................................................3
4C..................................................................................................................................................3
0C..................................................................................................................................................3
0......................................................................................................................................................3
30C................................................................................................................................................3
16C................................................................................................................................................3
4C..................................................................................................................................................4
1C..................................................................................................................................................4
1C..................................................................................................................................................4
4C..................................................................................................................................................4
1......................................................................................................................................................4
2min................................................................................................................................................4
60s..................................................................................................................................................4
4) PARAMETERS PROGRAMMING
and
buttons
to
increment the less significant digit until the number 53 is shown on the display, then
press
to enter in the parameters or press
to exit;
P0
P1
P3
P4
P5
P7
P8
P9
Function
Def
Min
Max
4C
-5C
+5C
0C
-5C
+5C
30C
0C
35C
16C
-19C
24C
0s
0s
60s
0s
0s
6s
PA
dC
dt
dH
4C
1C
6C
1C
1C
4C
1C
1C
6C
4C
1C
4C
0.5
0.5
1.0
0s
0s
10s
5C
5C
10C
2min
20min
60s
0s
60s
0min
0min
6min
temperature changing,
When parameter tu = 05, its possible adjust PWM speeds manually. To access
the system parameters, press, simultaneously, the
and
buttons for 3 seconds.
to
increment the less significant digit until the number 27 is shown on the display, then
press
to enter in the parameters or press
to exit;
Parameter
Function
Def
Min
Max
C0
H1
H2
H3
H4
H5
H6
Duty signal
00
00
01
PWM speed 1
27
00
99
PWM speed 2
37
00
99
PWM speed 3
50
00
99
PWM speed 4
66
00
99
PWM speed 5
81
00
99
PWM speed 6
90
00
99
and
button.
When tu = 0
When tu 0
Indication
Description
Indication
Description
u1
u2
u3
CL
Ht
u1
u2
u3
u4
u5
u6
CL
C2
C3
Ht
PWM speed 1
PWM speed 2
PWM speed 3
PWM speed 4
PWM speed 5
PWM speed 6
Compressor 1
Compressor 2
Compressor 3
Heating output
6) TEST MODE
Use this mode to test the outputs, where its possible to change their states.
To access the test mode, press simultaneously the
and
for 3 seconds.
to
increment the less significant digit until the number 86 is shown on the display, then
press
to enter in the parameters or press
to exit;
The first test is u1 , to access the other tests, press the
or the
button;
To enable an output, press
and to disable it press
again;
To exit this mode press the
button.
Indication
Description
u1
u2
u3
u4
u5
u6
Ht
CG
7) FAILURES
Failure
Description
Action
F1
F2
8) PROTECTIONS
The control panel exits are protected against short circuit with a thermal circuit.
The maximum output current per pin is 180mA.
9) OPERABILITY
This controller must operate in a range of temperature from -9C to 60C.
This controller operates with nominal tensions of 12 and 24V DC.
Under continuous mode, it must operate with tension from 10 to 29V DC, with the
integrity of all functions.
The electronic system must support 32V DC for five minutes, suffering no permanent
damage.
The control circuit must support -12V DC / -24VDC (polarity inversion) indefinitely,
suffering no damage.