You are on page 1of 2

NEW Non Isotope Control System

10/60 X-ray Crawler (10 to 60)


NEW

Non Isotope Tracking System

Wide range of accessories

Suitable for use in pipe diameters 10 to 60 Balteau 160kV, 200kV & 300kV tube options Yxlon 200kV constant potential tube option Self contained, full remote control (no umbilical) 360 panoramic exposures of new pipe welds Suitable for use onshore or offshore

10/60 X-ray Crawler (10 to 60)


General Information
JME Ltd based in Lowestoft, Suffolk, UK has established itself as a leading manufacturer of pipeline x-ray and gamma crawlers. The JME pipeline crawlers are designed to produce high quality panoramic radiographs of circumferential butt welds in new pipelines from 3 to 72. These units are designed and proven, both onshore and offshore, to work as a fully self contained, self powered exposure vehicle. There are no trailing leads and all commands are executed from outside the pipeline using a low activity isotope. The units can be commanded to travel, stop and radiograph as required. Crawler tracking, so that the position and direction of travel of the crawler can be monitored, is achieved either by mounting a low activity tracker isotope on the crawler or by using JMEs unique non-isotope tracking system. Four X-ray and three gamma crawler systems are available; X-ray crawler sizes are 6/16 (6 to 16), 8/18 (8 to 18), 10/60 (10 to 60) and 24/72 (24 to 72) and Gamma crawler sizes are 3/6 (3 to 6), 6/18 (6 to 18) and 10/48 (10 to 48). A wealth of design and field operating experience has been drawn upon in the development and manufacture of these crawlers, which are efficient, versatile and highly reliable. JME Ltd offer a complete service of manufacture, training, operating and refurbishment of their crawler systems.

Application
The 10/60 X-ray Crawler is available with Balteau 160kV, 200kV, 300kV or Yxlon 200kV constant potential tube options, for use in non-destructive testing for detection of defects in new pipeline butt welds. The 10/60 X-ray Crawler is a compact modular unit suitable for use onshore or offshore in a wide variety of climatic conditions, in pipelines of nominal diameter from 10 to 60 inches. Alternative X-ray tubes or Gamma projectors can be fitted, please contact JME Ltd with your requirements.

Technical Specifications
Pipeline diameter range Number of modules Overall weight of assembled crawler Overall assembled length - excluding X-ray tube X-ray tube full output ratings Intermediate kV setting options Optimum tube current Focal spot size Power source Battery Capacity Motor rating Travel speed Wheels Braking Mean positioning accuracy (15 slope) Maximum angle of climb in optimum conditions
Technical specification may change in accordance with our policy of continuous product development

10 - 60 in 5 106 kg 1670 mm (plus recovery ring 270 mm) 160kV, 200kV, 200kV CP, 300kV Balteau - 4 (70%, 80%, 90%, 100%) Yxlon - 110kV to 200kV in 10kV steps 2 - 3 mA 1.0 x 5 mm (typical) Sealed lead acid batteries (120V) 15 Ah 185 W continuous (0.25 HP) up to 0.3m/sec Contoured high traction rubber Dynamic 5 mm 45% (27)

JME Ltd Electron House, Old Nelson Street, Lowestoft, Suffolk, NR32 1EQ, U.K. Tel: +44 (0)1502 500969 Fax: +44 (0)1502 511932 e-mail: info@jme.co.uk www.jme.co.uk

You might also like