You are on page 1of 3

ARCGIS 9.

3 installation procedure
Step 1 Copy your ArcGIS Program to your disk for back up. Step 2 License installation 1. Open the folder "\arcgis9.3\crack" and observe that you have three folders there. 2. 3. 4. Doble clck the folder "license_server_setup" and run the file LMSetup. Select I received the license by email. Click the button Browse and then assign the file named 37102011.efl9 which is in the address .\arcgis9.3\crack\license_server_crack \ license_server_setup\ and then click next. After a while proceed for the installation. When the installation is over then Select the option NO, I will restart the compute Later and then click OK. By completing these steps License file should have been installed into the path C:\Program Files\ESRI\License\arcgis9x\.

5. 6.

Step 3 Copy the Authentic exe and license files 1. Browse to the arcgis9.3\crack\license_server_crack \ folder. Select only the files: ArcGIS and 37102011.dat.Copy them by using right click. 2. Browse to the location: C:\Program Files\ESRI\License\arcgis9x and paste by using right click. Click Yes for replacing the files. Step 4 Configure the license file 1. Double click the lmtools.exe file, which is in the address: C:\Program files\ESRI\License\arcgis9x. 2. Select Configuration using services and click ArcGIS License Manager. 3. Now, click the tab Configure services. 4. Replace the word Manager of Service name by Server. 5. Click the browse Button next to the address of Path to the debug log file. Observe that the previously assigned addresses in all of the three panels disappear. 6. Select the file named ARCGIS_LM and Click Open. 7. Click the Browse button next to the Path to the license file. Select the Files of type as License files (*.dat) and then select the file C:\Program Files\ESRI\License\arcgis9x\37102011

This Documentation is prepared by Nabaraj Subedi and recommends to use the document only for academic purpose.

8. Browse for the Path to the lmgrd file and select the file C:\Program Files\ESRI\License\arcgis9x\lmgrd.exe. 9. Check in Use services and Start server at power up. (Please just ignore this step for VISTA or window 2007 or black edition.) 10. Click Save service button and press Yes for saving. 11. Click Start/ stop/ Reread and press the button Start Server. 12. Click Server diagnostics and click Perform Diagnostics. 13. If you get the information like License can be checked out. Then your license is set up otherwise (such as your license cannot be) you have to reinstall the license program after uninstalling it. Step 5 Install the ArcGIS main program 1. Go to the path G:\software\arcgis9.3\Desktop. Double click the set up.exe fill with the computer icon and Wait for some time. Click next. 2. Select for I Accept the license agreement. and then click next. 3. Select Complete and then next. 4. Go on Clicking next for each dialog box until (or OK) the installation begins. 5. Wait until the installation is accomplished. 6. Wait until you get the message that Your ARCGIS has been successfully installed. 7. Click finish. Step 6 Registering the Program After the installation is over, still you have some steps more. 2. Go to the path G:\software\arcgis9.3\crack\data_interop and copy the file named as fme_license.dat". Paste this file to the path C:\Program Files\ArcGIS\Data Interoperability Extension. 1. Click Start menu and go to ARCGIS\Desktop Administrator. 2. Follow the Configuration as follows: "Software Product": choose "ArcInfo (Floating)" "License Manager": Change to your own computer name. Note: You can access to your computer name by right clicking my computer in the desktop and selecting properties.

This Documentation is prepared by Nabaraj Subedi and recommends to use the document only for academic purpose.

"Availability": select "Arc Info Desktop (Floating)". 3. Finally, Click Apply and then click OK.

Step 7 Starting the ARCMAP 1. Open the ArcGIS program from the Start menu and enjoy GIS.
Success!

If you get your computer hanged or becomes slow times and again while you are using ARCGIS then activate you ARCGIS License once again by following the steps describe below.

I. For this, bring your cursor in the lower right corner of your monitor (near the time display) and then right click. II. Select the task manager. III. Select the tab processes IV. Click the tab image name to sort the processes running in your system V. Click lmgrd.exe and right click to select the end process VI. Click the yes button. VII. Now go to the start menu and Click license manager and select for License manager. Now select License Manager Tools. VIII. Click the start/stop/Reread button and check the info server start successful at the button. IX. Close the lmtools window. X. Now your ArcGIS runs again without problem.

This Documentation is prepared by Nabaraj Subedi and recommends to use the document only for academic purpose.

You might also like