Professional Documents
Culture Documents
Victor
Equipment Company
is committed to
providing superior quality,
reliable products that earn
our customers confidence.
Victor products and
services will be recognizably
better than those of our
competitors by consistently
meeting customers
expectations and by
providing safe, reliable
performance.
Victor has a proud heritage and long - standing
reputation for quality manufacturing
and service to the welding industry.
For U.S. Customer Service Call: Phone: 1-800-569-0547 Fax: 1-800-535-0557
Visit the Victor Specialty Products Web Site: http//www.victorhpi.com
Introduction
Victor Specialty Products - proven service to specialty gas and manifold markets for over 92 years
Supported by manufacturing and engineering expertise of Victor Equipment Company and a recently completed, multi-million dollar, state-of-the-art assembly and testing facility, Victor Speciality Products provides
unsurpassed product quality and performance in a timely manner.
Table of Contents
Regulator Selection Information.....................................................................................
Pages 4-5
Pages 6-7
Table of Contents
HPS4 Brass Bar Stock, Single Stage, Piston-type (high pressure) ...................................... Pages 28-29
HPL700 Forged Brass Bar Stock, SingleStage, High Flow Line Regulators ......................... Pages 30-31
PR 150 Brass Bar Stock, Non-Corrosive Calibration Gas (CGA 600) .................................... Page 40
PR 160 Brass Bar Stock, Non-Corrosive Calibration Gas C-10) ........................................... Page 41
PR 190 Aluminum, Non-Corrosive Calibration Gas (C-10)...................................................... Pages 42-43
LB 150 Chrome-plated Forged Brass, Non-Corrosive Lecture Bottles .................................. Pages 44-45
LB 165 Stainless Steel, Corrosive Lecture Bottles ................................................................ Pages 46-47
Table of Contents
General Purpose, Liquid Cylinder, Miscellaneous Regulators
GPS 270/280 Chrome-plated Forged Brass, Single Stage ................................................... Pages 48-49
GPT 270/280 Chrome-plated Forged Brass, Two Stage ....................................................... Pages 50-51
GPL 270/280 Chrome-plated Forged Brass, Single Stage Line Regulators ......................... Pages 52-53
GLC 350 Chrome-plated Forged Brass, Single Stage for Liquid Gas Cylinders ................... Pages 54-55
SR 310 Aluminum, Single-Stage for CO2 /High Flows ........................................................ Page 56
Manifold Systems
PDS 600 Brass/Stainless Steel Bar Stock, Pressure Differential Switchover Manifold ........ Pages 60-61
PDS 500 Brass/Stainless Steel Bar Stock, Pressure Differential Switchover Manifold ........ Pages 62-63
VHP 2100/200 High Purity Switchover Manifold ................................................................. Pages 64-65
HPRB & HPLB Brass Manifolds ........................................................................................... Page 66
HPRS & HPLS Stainless Steel Manifolds
Protocol Stations
............................................................................ Page 67
General Data
Table of Contents
MBG-A Chrome-plated Brass Bar Stock, Two Stage for Blood Gas Analysis ....................... Page 57
How To Order
Step 1
Refer to the regulator model legend below and the regulator selection guide on page 87
to identify the type of regulator that best fits your requirements. (Example SGS Series)
Step 2 Locate the specifications page for that particular regulator and use the Model Number System
to select the model desired. (Example SGS500)
Step 3 Select the regulator delivery range you require. (Example SGS-500-80)
Step 4 Specify the CGA inlet connection required. (Example SGS-500-80-330)
Note: If no inlet is desired, please specify 4F on your order.
XXX
XXX
XXX
XX
Series
Delivery
Inlet Fitting
Outlet Fitting
Options
HPS
15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
CGA
00 Bare body
01 Cross purge
02 Helium Leak
HPT
HPL
SGS
Stainless Steel
Single Stage
SGT
B1P 1 Pigtail
B2P 2 Pigtail
Stainless Steel
Two Stage
Certification
03 Certification
04 Captured Vent
05 Panel mount kit
06 W/O gauges
07 Relief Valve
SGL
SGS500-500-4F-2S-02, 04
Legend
Type of Regulator
Legend
Type of Regulator
GPS
GPT
GPL
DRK
DRL
HPS
HPT
HPL
PDS
D-1
VHP
SGS
SGT
SGL
LB
CRS
PR
PS
Gauge Ranges
15 (A Range)
2-30 PSIG Gauge
40 (B Range)
2- 60 PSIG Gauge
80 (C Range) 4-100 PSIG Gauge
125 (D Range) 5-200 PSIG Gauge
200 (E Range) 10-400 PSIG Gauge
300 ..................... 10-400 PSIG Gauge
500 (Brass) ........ 20-600 PSIG Gauge
500 (Stainless) ... 60-600 PSIG Gauge
Gauge Ranges
Regulator Gauges: Unless otherwise noted,
high pressure gauges for all oxygen, inert
gas,CO2, N2O, and hydrogen models are
graduated 200-4000 psig. High pressure
gauges for fuel gas models are graduated
20-400 psig. Low pressure or outlet gauge
ranges are determined by the regulator
delivery range selected.
Model
SGS500
Chrome
Chrome Plated
Stainless Plated Forged
Brass
Steel
Brass
X
SGT500
SGL500
Brass
Electroless
Nickel
Plated
Brass
Stage/Type
Aluminum
Single
Stage
Two
Stage
Other
HPT500
HPL500
HPS270/280
HPT270/280
HPL270/280
HPT100
X
Line
High purity
X
Line
High purity
Piston
High purity
HPL700
X
X
D-1 (Dome)
HPS 4
Type of Usage
High purity (critical)
X
X
HPS500
General Application
Line
High flow
Dome
Assist gas
CRS100
Yoke-style
Corrosion resistant
CRS200
Yoke-style
Corrosion resistant
Piston
Calibration gas
Piston
Calibration gas
PR150
X
X
PR160
PR190
LB150
LB165
X
X
Piston
Calibration gas
Lecture
Non-corrosive gases
Lecture
GPS270/280
GPT270/280
GPL270/280
Line
GLC350
Liquid Cyl.
Specialty gas
SR310/311/312
MBG-A
X
X
Special purpose
Legend
Flow-Straightening Technology
SGS500
Single-Stage
Stainless Steel Regulator
TYPICAL APPLICATIONS
Gas chromatography
Regulation of corrosive gases
Research sampling systems
Laser gas systems
Process analyzers
EPA protocol standards
Emission monitoring
FEATURES
MATERIALS OF CONSTRUCTION
Quality Components
Metal-to-metal diaphragm seal
2 dual scale gauges (psi/kp2)
Cartridge type seat assembly with 10 micron
inboard filter
Resistant to inboard diffusion of atmospheric contaminants
Materials of construction will not off-gas and contaminate the
gas stream
These regulators are able to withstand internal vacuums
generated during purging operations and have minimal purge
volumes for maximum safety
New inboard helium seat creep test performed in addition to
our standard inboard helium test ensures highest possible
seat/seal integrity
SPECIFICATIONS
Maximum inlet pressure........................................3000 psig
Inlet & outlet ports ............................................1/4 NPT (F)
Temperature Operating Range:......-40 to 140F (-40 to 60C)
Delivery pressure rise: ..........<.92 psig/100 psig inlet decay
Flow coefficient ......................................................Cv= .135
Weight.......................................................3.6 lbs (1.64 kgs)
Outlet pressure ranges...................................15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
Installation Flexibility
Options
Rotating captured vent for remote venting
Diffusion resistant, packless diaphragm valve
550
220
500
200
450
180
(HPS/SGS/HPL/SGL)
400
350
300
500 PSIG Range
250
200
300 PSIG Range
(HPS/SGS/HPL/SGL)
160
140
120
125 PSIG Range
100
80
80 PSIG Range
150
60
100
40
50
20
40 PSIG Range
15 PSIG Range
0
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
500
1000
1500
2000
2500
(HPS/SGS/HPL/SGL)
3500
4000
4500
5000
3000
(HPS/SGS/HPL/SGL)
550
340
320
500
300
450
280
260
240
220
200
180
300 PSIG Range
160
140
120
100
350
300
250
300 PSIG Range
200
150
80
400
100
60
40
50
20
0
0
0
500
1000
1500
2000
2500
3000
3500
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
XXX
Series
Delivery
SGS
15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
XXX
XXX
XXX
XX
Outlet Gauge
Pressure
Inlet Fitting
Outlet Fitting
Options
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
CGA
240, 330, 350, 540,
580, 660, 705
00 Bare body
01 Cross purge
02 Helium Leak
B1P 1 Pigtail
B2P 2 Pigtail
Certification
03 Certification
04 Captured Vent
05 Panel mount kit
06 W/O gauges
07 W/Relief Valve
SGS500-500-4F-2S-02, 04
SGT500
Two-Stage
Stainless Steel Regulator
TYPICAL APPLICATIONS
Gas chromatography
Regulation of corrosive gases
Diffusion furnaces
Research sampling systems
Laser gas systems
Process analyzers
CEM and EPA protocol standards
FEATURES
MATERIALS OF CONSTRUCTION
Quality Components
Installation Flexibility
Stainless steel 1.6 diaphragm for minimal footprint
6 port stainless steel bar stock body
(3 high/ 2 low/ 1 intermediate)
Threaded housing cap for panel mounting
Available for cylinder, OEM or barebody
Options
Rotating captured vent for remote venting
Diffusion resistant, packless diaphragm valve
Relief valve on intermediate stage
SPECIFICATIONS
Maximum inlet pressure ..........................................3000 psig
Inlet & outlet ports...............................................1/4 NPT (F)
Temperature operating range:.......-40 to 140F (-40 to 60C)
Delivery pressure rise: ............<.92 psig/100 psig inlet decay
Flow coefficient .........................................................Cv= .111
Weight ..............................................................4.5 lbs (2 kgs)
Outlet pressure ranges...................................15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
10
600
240
550
220
500
200
(HPT/SGT)
450
400
350
500 PSIG Range
300
250
300 PSIG Range
200
(HPT/SGT)
180
160
140
120
200 PSIG Range
100
125 PSIG Range
80
150
60
100
40
50
20
80 PSIG Range
40 PSIG Range
15 PSIG Range
0
0
500
1000
1500
2000
2500
3000
3500
200
400
600
800
1000
(HPT/SGT)
1400
1600
1800
2000
1200
(HPT/SGT)
600
350
550
500
300
250
200
300 PSIG Range
150
200 PSIG Range
450
400
350
500 PSIG Range
300
250
200
300 PSIG Range
100
150
125 PSIG Range
100
50
50
0
0
0
500
1000
1500
2000
2500
3000
500
1000
1500
2000
2500
3000
3500
4000
XXX
Series
Delivery
SGT
15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
XXX
XXX
XXX
XX
Outlet Gauge
Pressure
Inlet Fitting
Outlet Fitting
Options
CGA
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
00 Bare body
01 Cross purge
02 Helium Leak
B1P 1 Pigtail
B2P 2 Pigtail
11
Certification
03 Certification
04 Captured Vent
05 Panel mount kit
06 W/O gauges
07 W/Relief Valve
SGT500-500-4F-2S-02, 04
SGL500
TYPICAL APPLICATIONS
FEATURES
MATERIALS OF CONSTRUCTION
Quality Components
Metal-to-metal diaphragm seal
2 dual scale gauges (psi/kp2)
Cartridge type seat assembly with 10 micron inboard filter
Resistant to inboard diffusion of atmospheric contaminants
Materials of construction will not off-gas and contaminate the
gas stream
These regulators are able to withstand internal vacuums
generated during purging operations and have minimal purge
volumes for maximum safety
New inboard helium seat creep test performed in addition to
our standard inboard helium test ensures highest possible
seat/seal integrity
Installation Flexibility
Options
Rotating captured vent for remote venting
Diffusion resistant, packless diaphragm valve
SPECIFICATIONS
Maximum inlet pressure.................................................3000 psig
Inlet & outlet ports .....................................................1/4 NPT (F)
Temperature operating range: .............-40 to 140F (-40 to 60C)
Delivery pressure rise: ...................<.92 psig/100 psig inlet decay
Flow coefficient ...............................................................Cv= .135
Weight................................................................2.7 lbs (1.23 kgs)
Outlet pressure ranges............................................15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
12
5.20
L.P. GAUGE
2.60
.64
90
REASE
INC
INLET PORT
OUTLET PORT
1.98
2.00
2.20
OUTLET PORT
AUX.
CREASE
DE
90
10-32 UNF
THREAD (TYP.)
.750
PANEL MOUNTING
NUTS (OPTIONAL)
VENT KIT
(OPTIONAL)
(HPS/SGS/HPL/SGL)
(HPS/SGS/HPL/SGL)
220
340
320
200
300
180
280
260
240
220
200
180
300 PSIG Range
160
140
120
160
140
120
125 PSIG Range
100
80
80 PSIG Range
100
60
125 PSIG Range
80
40
60
40 PSIG Range
40
20
20
15 PSIG Range
0
0
500
1000
1500
2000
2500
3000
3500
500
1000
1500
2000
2500
550
550
500
500
450
450
(HPS/SGS/HPL/SGL)
3500
4000
4500
5000
3000
400
350
300
500 PSIG Range
250
200
300 PSIG Range
(HPS/SGS/HPL/SGL)
400
500 PSIG Range
350
300
250
300 PSIG Range
200
150
150
100
100
50
50
0
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
XXX
Series
Delivery
SGL
15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
XXX
XXX
XXX
XX
Outlet Gauge
Pressure
Inlet Fitting
Outlet Fitting
Options
CGA
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
00 Bare body
01 Cross purge
02 Helium Leak
B1P 1 Pigtail
B2P 2 Pigtail
13
Certification
03 Certification
04 Captured Vent
05 Panel mount kit
06 W/O gauges
07 W/Relief Valve
SGL500-500-4F-2S-02, 04
HPS500
Chrome-Plated Brass Regulators
Single-Stage
Chrome-Plated Brass Regulator
HPS500 regulators are recommended for very high purity,
inert gas applications where slight variance in delivery
pressure is acceptable (as cylinder pressure decreases).
TYPICAL APPLICATIONS
FEATURES
MATERIALS OF CONSTRUCTION
Quality Components
Metal-to-metal diaphragm seal
2 dual scale gauges (psi/kp2)
Cartridge type seat assembly with 10 micron
inboard filter
Resistant to inboard diffusion of atmospheric contaminants
Materials of construction will not off-gas and contaminate the
gas stream
These regulators are able to withstand internal vacuums
generated during purging operations and have minimal purge
volumes for maximum safety
New inboard helium seat creep test performed in addition to
our standard inboard helium test ensures highest possible
seat/seal integrity
Installation Flexibility
Options
Rotating captured vent for remote venting
Diffusion resistant, packless diaphragm shut-off valve
SPECIFICATIONS
Maximum inlet pressure.....................................3000 psig
Inlet & outlet ports .........................................1/4" NPT (F)
Temperature operating range:......-40 to 140F (-40 to 60C)
Delivery pressure rise:.......<.92 psig/100 psig inlet decay
Flow coefficient ...................................................Cv= .135
Weight......................................................4.0 lbs (1.8 kgs)
Outlet pressure ranges................................15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
14
500
200
450
180
(HPS/SGS/HPL/SGL)
400
350
300
500 PSIG Range
250
200
300 PSIG Range
(HPS/SGS/HPL/SGL)
160
140
120
125 PSIG Range
100
80
80 PSIG Range
150
60
100
40
50
20
40 PSIG Range
15 PSIG Range
0
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
500
1000
1500
2000
2500
(HPS/SGS/HPL/SGL)
3500
4000
4500
5000
3000
(HPS/SGS/HPL/SGL)
550
340
320
500
300
450
280
260
240
220
200
180
300 PSIG Range
160
140
120
100
350
300
250
300 PSIG Range
200
150
80
400
100
60
40
50
20
0
0
0
500
1000
1500
2000
2500
3000
3500
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
XXX
Series
Delivery
HPS
15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
XXX
XXX
XXX
XX
Outlet Gauge
Pressure
Inlet Fitting
Outlet Fitting
Options
CGA
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
00 Bare body
01 Cross purge
02 Helium Leak
B1P 1 Pigtail
B2P 2 Pigtail
15
Certification
03 Certification
04 Captured Vent
05 Panel mount kit
06 W/O gauges
07 W/Relief Valve
HPS500-500-4F-2S-02, 04
HPT500
Chrome-Plated Brass Regulators
Two-Stage
Chrome-Plated Brass Regulator
HPT500 regulators are recommended for high purity,
non-corrosive gas applications where constant delivery
pressure is requires(as cylinder pressure decreases).
TYPICAL APPLICATIONS
FEATURES
MATERIALS OF CONSTRUCTION
Quality Components
Metal-to-metal diaphragm seal
2 dual scale gauges (psi/kp2)
Cartridge type seat assembly with 10 micron
inboard filter
Resistant to inboard diffusion of atmospheric contaminants
Materials of construction will not off-gas and contaminate the
gas stream
These regulators are able to withstand internal vacuums
generated during purging operations and have minimal purge
volumes for maximum safety
New inboard helium seat creep test performed in addition to
our standard inboard helium test ensures highest possible
seat/seal integrity
Installation Flexibility
1.6 stainless steel diaphragm for minimal footprint
6 port brass bar stock body (3 high/ 2 low/
1 intermediate)
Threaded housing cap for panel mounting
Options
SPECIFICATIONS
Maximum inlet pressure .......................................3000 psig
Inlet & outlet ports ............................................1/4 NPT (F)
Temperature operating range:.........-40 to 140F (-40 to 60C)
Delivery pressure rise:..........<.07 psig/100 psig inlet decay
Flow coefficient.......................................................Cv= .111
Weight ...........................................................4.5 lbs (2 kgs)
Outlet pressure ranges...................................15 (0-15 psig)
40 (0-40 psig)
80 (0-80 psig)
125 (0-125 psig)
200 (0-200 psig)
300 (0-300 psig)
500 (0-500 psig)
16
600
240
550
220
500
200
(HPT/SGT)
450
400
350
500 PSIG Range
300
250
300 PSIG Range
200
(HPT/SGT)
180
160
140
120
200 PSIG Range
100
125 PSIG Range
80
150
60
100
40
50
20
80 PSIG Range
40 PSIG Range
15 PSIG Range
0
0
500
1000
1500
2000
2500
3000
3500
200
400
600
800
1000
1400
1600
1800
2000
(HPT/SGT)
1200
350
(HPT/SGT)
600
550
300
500
250
200
300 PSIG Range
150
200 PSIG Range
100
450
400
350
500 PSIG Range
300
250
200
300 PSIG Range
150
100
50
50
0
0
0
500
1000
1500
2000
2500
3000
500
1000
1500
2000
2500
3000
3500
4000
XXX
Series
Delivery
HPT
15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
XXX
XXX
XXX
XX
Outlet Gauge
Pressure
Inlet Fitting
Outlet Fitting
Options
CGA
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
00 Bare body
01 Cross purge
02 Helium Leak
B1P 1 Pigtail
B2P 2 Pigtail
17
Certification
03 Certification
04 Captured Vent
05 Panel mount kit
06 W/O gauges
07 W/Relief Valve
HPT500-500-4F-2S-02, 04
HPL500
Chrome-Plated Brass Regulators
Line
Chrome-Plated Brass Regulator
HPL500 regulators are recommended for high purity,
non-corrosive gas applications where gas is supplied
through a distribution system (pipeline).
TYPICAL APPLICATIONS
FEATURES
MATERIALS OF CONSTRUCTION
Quality Components
Metal-to-metal diaphragm seal
2 dual scale gauges (psi/kp2)
Cartridge type seat assembly with 10 micron
inboard filter
Resistant to inboard diffusion of atmospheric contaminants
Materials of construction will not off-gas and contaminate the
gas stream
These regulators are able to withstand internal vacuums
generated during purging operations and have minimal purge
volumes for maximum safety
New inboard helium seat creep test performed in addition to
our standard inboard helium test ensures highest possible
seat/seal integrity
Installation Flexibility
Options
Rotating captured vent for remote venting
Diffusion resistant, packless diaphragm shut-off valve
SPECIFICATIONS
Maximum inlet pressure ........................................3000 psig
Inlet & outlet ports ...................................................1/4" NPT (F)
Temperature operating range:..........-40 to 140F (-40 to 60C)
Delivery pressure rise:.............< 1.63 psig/100 psig inlet decay
Flow coefficient.......................................................Cv= .135
Weight ...................................................2 lbs, 10 oz. (1 kgs)
Outlet pressure ranges...................................15 (0-15 psig)
40 (0-40 psig)
80 (0-80 psig)
125 (0-125 psig)
200 (0-200 psig)
300 (0-300 psig)
500 (0-500 psig)
18
5.20
L.P. GAUGE
2.60
.64
90
REASE
INC
INLET PORT
OUTLET PORT
1.98
2.00
2.20
OUTLET PORT
AUX.
CREASE
DE
10-32 UNF
THREAD (TYP.)
.750
PANEL MOUNTING
NUTS (OPTIONAL)
VENT KIT
(OPTIONAL)
(HPS/SGS/HPL/SGL)
550
220
500
200
450
180
400
350
300
500 PSIG Range
250
200
300 PSIG Range
(HPS/SGS/HPL/SGL)
160
140
120
125 PSIG Range
100
80
80 PSIG Range
150
60
100
40
50
20
40 PSIG Range
15 PSIG Range
0
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
500
1000
1500
2000
2500
3500
4000
4500
5000
(HPS/SGS/HPL/SGL)
3000
340
(HPS/SGS/HPL/SGL)
550
320
500
300
450
280
260
240
220
200
180
300 PSIG Range
160
140
120
100
350
300
250
300 PSIG Range
200
150
80
400
100
60
40
50
20
0
0
0
500
1000
1500
2000
2500
3000
3500
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
XXX
Series
Delivery
HPL
15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
200 (10-200 psig)
300 (10-300 psig)
500 (20-500 psig)
XXX
Outlet Gauge
Pressure
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
XXX
XXX
XX
Inlet Fitting
Outlet Fitting
Options
00 Bare body
01 Cross purge
02 Helium Leak
B1P 1 Pigtail
B2P 2 Pigtail
Certification
03 Certification
04 Captured Vent
05 Panel mount kit
06 W/O gauges
07 W/Relief Valve
19
90
HPS270/280
Chrome-Plated Brass Regulators
Single-Stage
Chrome-Plated Brass Regulator
HPS270
HPS272
HPS280
HPS281
TYPICAL APPLICATIONS
Gas chromatography
Zero gases, auto emission, and span gases
Research sampling systems
Laser gas systems
Process analyzers
Purging systems
Atomic absorption analysis
FEATURES
MATERIALS OF CONSTRUCTION
Quality Components
2-3/4 stainless steel diaphragm
2-1/2 dual scale gauges (psi/kp2)
Cartridge type inlet with 10 micron filter
Self reseating relief valve (vented) except 280/281
Not designed to protect downstream apparatus
Resistant to inboard diffusion of atmospheric contaminants
Materials of construction will not contaminate the
gas stream
Options
Diffusion resistant, packless diaphragm shut-off valve
Panel mount kit
SPECIFICATIONS
Maximum inlet pressure ...............(HPS270/272) 3000 psig
(HPS280/282) 350 psig
Temperature operating range:............0 to 140F (-17 to 60C)
Delivery pressure rise: ...............< .5 psig/100 psig inlet decay
Flow coefficient .......................................................Cv= .05
Valve outlet ......................................................1/4" NPT (F)
Outlet pressure ranges ..........15 (2-15 psig), 40 (2-40 psig)
80 (4-80 psig), 125 (5-125 psig)
20
Pressure (PSIG)
100
80
80
60
Inlet pressure (Air@70 F)
2000 PSIG
250 PSIG
Tested with outlet valve full
open & outlet pressure taken
at regulator L.P. port
40
40
20
15
200
400
600
800 1000
Flow (SCFH)
1200 1400
1600
HPS270/280
HPS270/280 Series
Series Model
Model Number
Number System
System
HPSXXX
XXX
Series
Delivery
HPS270
15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
HPS272
HPS280
XXX
XXX
XXX
XX
Outlet Gauge
Pressure
Inlet Fitting
Outlet Fitting
Options
CGA
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
00 Bare body
01 Cross purge
02 Helium Leak
B1P 1 Pigtail
B2P 2 Pigtail
HPS282
HPS270-40-4F-2S-02
Certification
03 Certification
06 W/O gauges
07 W/relief valve
15 Panel mount kit
21
HPT270/280
Chrome-Plated Brass Regulators
Two-Stage
Chrome-Plated Brass Regulator
HPT270
HPT272
HPT280
HPT281
TYPICAL APPLICATIONS
FEATURES
Precision High Purity Performance
Helium leak rate tested at 1x10-8 scc/sec.
100% inboard leak checked with precision
helium mass spectrometer
Quality Components
2-3/4 stainless steel diaphragm
2-1/2 dual scale gauges (psi/kp2)
Cartridge type inlet with 10 micron filter
Self reseating relief valve (vented) except 280/281
Not designed to protect downstream apparatus
Resistant to inboard diffusion of atmospheric
contaminants
Materials of construction will not contaminate the gas
stream
Options
Diffusion resistant, packless diaphragm shut-off valve
Panel mount kit
MATERIALS OF CONSTRUCTION
Body .......................................Chrome-plated forged brass
Spring housing cap ................Chrome-plated forged brass
Diaphragm.............................................301 stainless steel
Nozzle ........................................................................Brass
Seat .......................................................1 stage PCTFE
2 stage Viton
Seals .......................................................................Viton
Poppet ........................................................Brass CDA 360
Inboard Filter ................................Cartridge - brass
Inlet: 10 micron sintered
stainless steel.
Seat Return Spring .............................316L stainless steel
Pressure Adjusting Spring...........Heat-treated spring steel
Adjusting Knob ..................Acrylonitrile Butadiene Styrene
SPECIFICATIONS
Maximum inlet pressure...............(HPS270/272) 3000 psig
.....................................................(HPS280/282) 350 psig
Temperature operating range: ......0 to 140F (-17 to 60C)
Delivery pressure rise:..........<.1 psig /100 psig inlet decay
Flow coefficient....................................................... Cv= .04
Valve outlet......................................................1/4" NPT (F)
Outlet pressure ranges ..........15 (2-15 psig), 40 (2-40 psig)
80 (4-80 psig), 125 (5-125 psig)
22
80
100
Pressure (PSIG)
125
80
60
Inlet pressure (Air@70 F)
2000 PSIG
250 PSIG
Tested with outlet valve full
open & outlet pressure taken
at regulator L.P. port
40
40
20
15
100
200
300
400 500
Flow (SCFH)
600
700
800
XXX
Series
Delivery
HPT270
15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
HPT272
HPT280
XXX
XXX
XXX
XX
Outlet Gauge
Pressure
Inlet Fitting
Outlet Fitting
Options
CGA
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
00 Bare body
01 Cross purge
02 Helium Leak
2S 1/8 Swagelok
4S 1/4 Swagelok
HPT282
HPT270-200-590-4S-15
Certification
03 Certification
06 W/O gauges
07 W/relief valve
15 Panel mount kit
23
HPL270/280
HPL270
HPL272
HPL280
HPL281
TYPICAL APPLICATIONS
FEATURES
Precision High Purity Performance
Helium leak rate tested at 1x10-8 scc/sec.
100% inboard leak checked with precision
helium mass spectrometer
Quality Components
Options
Diffusion resistant, packless diaphragm shut-off valve
Panel mount kit
MATERIALS OF CONSTRUCTION
Body.......................................Chrome-plated forged brass
Spring housing cap................Chrome-plated forged brass
Diaphragm ............................................301 stainless steel
Nozzle .......................................................................Brass
Seat ........................................................................Viton
Seals .......................................................................Viton
Poppet ........................................................Brass CDA 360
Inboard filter ....................................Stainless steel screen
10 micron rating
Seat Return Spring .............................316L stainless steel
Pressure Adjusting Spring ..........Heat-treated spring steel
Adjusting Knob..................Acrylonitrile Butadiene Styrene
SPECIFICATIONS
Maximum inlet pressure ........................................350 psig
Temperature Operating Range: ........0 to 140F (-17 to 60C)
Delivery pressure rise: .........< .1 psig/100 psig inlet decay
Flow coefficient.......................................................Cv= .19
Valve outlet .....................................................1/4" NPT (F)
Outlet pressure ranges .................................15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
24
125
80
80
60
Inlet pressure (Air@70 F)
200 PSIG
* Indicates 50 PSIG
inlet pressure
40
40
20
15
200
400
600
HPL270
HPL272
HPL280
XXX
Delivery
15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
XXX
Outlet Gauge
Pressure
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
XXX
XXX
XX
Inlet Fitting
Outlet Fitting
Options
00 Bare body
02 Helium Leak
Certification
03 Certification
06 W/O gauges
15 Panel mount kit
HPL282
HPL280-280-15-4F-4F
25
HPT100
Chrome-Plated Brass Regulators
Two Stage
Chrome-Plated Brass Regulator
HPT100 regulators are recommended for very high purity,
gas applications where compact design and consistent delivery pressure are required (as cylinder pressure decreases).
TYPICAL APPLICATIONS
FEATURES
Precision High Purity Performance
Helium leak rate tested at 2.0x10-6 scc/sec.
100% inboard leak checked with precision
helium mass spectrometer
Low dead space (internal volume) minimizes
particle generation
Quality Components
1-3/8 stainless steel diaphragm
1-1/2 chrome gauges
10 micron sintered stainless steel filter
Resistant to inboard diffusion of atmospheric
contaminants
Self reseating relief valve. Not designed to
Protect downstream apparatus
Installation Flexibility
1.375 diaphragm for minimal footprint
Options
Rotating captured vent for remote venting
Diffusion resistant, packless diaphragm shut-off valve
MATERIALS OF CONSTRUCTION
Body .................................Chrome-plated brass bar stock
Spring housing cap ....................Chrome-plated bar stock
Diaphragm............................................301 stainless steel
Nozzle.......................................................................Brass
Seat ....................................................1st stage PCTFE
2nd stage Viton
Seals .....................................................Nylon and Viton
Poppet .......................................................Brass CDA 360
Inboard filter .........................................10 micron sintered
stainless steel
Seat return spring ................................302 stainless steel
Pressure adjusting spring ..........Heat-treated spring steel
Adjusting knob..................Acrylonitrile Butadiene Styrene
SPECIFICATIONS
Maximum inlet pressure .....................................3000 psig
Temperature operating range: ..........0 to 140F (-17 to 60C)
Delivery pressure rise: ........< .1 psig/100 psig inlet decay
Outlet pressure ranges .................................15 (2-15 psig)
80 (4-80 psig)
125 (5-125 psig)
26
120
100
80
60
Inlet pressure (Air@70 F)
40
2000 PSIG
250 PSIG
20
0
0
200
400
600
Flow (SCFH)
800
1000
HPT100
XXX
Delivery
15 (2-15 psig)
80 (4-80 psig)
125 (5-125 psig)
XXX
Outlet Gauge
Pressure
15 (2-30 psig)
80 (4-100 psig)
125 (5-200 psig)
XXX
XXX
XX
Inlet Fitting
Outlet Fitting
Options
CGA
00 Bare body
02 Helium Leak
Certification
03 Certification
27
HPS4
TYPICAL APPLICATIONS
FEATURES
MATERIALS OF CONSTRUCTION
Body.................................................................Machined brass
Quality Components
2-1/4 brass gauges
Double inlet filters
Installation Flexibility
Designed for panel mounting
Options
Flush/adjustable panel mount
SPECIFICATIONS
Maximum inlet pressure ..........6000 psig without inlet fitting
5500 psig with CGA 680, 347
3000 psig with CGA 580, 346, 350
Temperature Operating range: .................o to 140F (-17 to 60C)
Delivery pressure rise:
750/1500 range < 2.4 psig/100 psig inlet decay
3000 range < 4.8 psig/100 psig inlet decay
Flow coefficient ...........................................................Cv= .103
Weight ...............................................................4 lbs. (1.8 kgs.)
Outlet .......................................................1/4" Swagelok fitting
Outlet pressure ranges .................................750 (50-750 psig)
1500 (100-1500 psig)
3000 (200-3000 psig)
28
3500
3000
2500
2000
1500
1000
500
0
0
4000
8000
1200
1600
2000
Flow (SCFH)
Flow data does not apply to CO2 models
HPS4
XXX
Delivery
XXX
Outlet Gauge
Pressure
15 (2-30 psig)
80 (4-100 psig)
125 (5-200 psig)
XXX
XXX
XX
Inlet Fitting *
Outlet Fitting
Options
CGA
00 Bare body
02 Helium Leak
Certification
03 Certification
05 Panel mount kit
29
HPL700
TYPICAL APPLICATIONS
Laser gas systems
High-purity gas handling
High flow non-corrosive gases
FEATURES
High Flow Delivery
31/4 stainless steel diaphragm
Delrin bushing for smooth adjustment
MATERIALS OF CONSTRUCTION
Body ..............................................................Forged brass
Housing cap ..................................................Forged brass
Diaphragm ............................................301 stainless steel
Nozzle ........................................................Brass CDA 360
Seat..........................................................................VitonTM
Seals .........................................................Nylon & Viton
Quality Components
2.5 dual brass gauges
Resistant to inboard diffusion of atmospheric
contaminants
Filter ..........................................................................Nickel
SPECIFICATIONS
Maximum inlet pressure ...............(HPL-700-400) 500 psig
(HPL-700-200) 350 psig
Inlet ..................................................................1/2" NPT(F)
Outlet ...............................................................1/2" NPT(F)
Temperature operating range:...........0 to 140F (-17 to 60C)
Delivery pressure rise: ............< 4.9 psig/100 psig inlet decay
Flow coefficient.....................................................Cv= 1.67
Weight ........................................................5.5 lbs (2.5 kg)
Outlet pressure ranges ......................................0-200 psig
0-400 psig
30
120
Inlet Pressure
(Air @ 70 degrees F)
300 PSIG
150 PSIG
100
80
60
40
20
0
0
2000
4000
6000
Flow (SCFH)
Tested with an outlet fitting of 1/2" I.D. &
outlet pressure taken at regulator outlet fitting
Series
Delivery
HPL700
200
Line Regulator
XXX
400
XXX
Outlet Gauge
Pressure
15 (2-30 psig)
80 (4-100 psig)
125 (5-200 psig)
HPL700-400-500
31
XX
Options
PMT
(F)
Inlet Fitting
Ordering Examples:
HPL700-200-500
XXX
Description
HPL700-200-500
HPL700-200-500-PMT
HPL700-400-500
Part No.
0782-8820
0782-8821
0782-8827
D1- Dome
Dome Regulator
The D1 Dome Regulator is a compact brass regulator
designed for applications, such as laser delivery systems,
that require constant delivery pressure throughout varying
flow ranges and inlet pressures
TYPICAL APPLICATIONS
Dome
FEATURES
Combines dome and pilot regulator into one unit
Lighter and more compact than traditional
two regulator unit
Fully adjustable delivery range 50-550 psig
Bracket for wall mounting included
2 chrome gauges
Installation Flexibility
Cylinder mountable
Panel mount (included)
Weight
MATERIALS OF CONSTRUCTION
Body.................................................................CDA 360 brass
Pilot housing cap............................Chrome plated CDA brass
Dome housing cap...........................................CDA 360 brass
Pilot diaphragm ...............................................Brass CGA 360
Nozzle/seat ......................................................CDA 360 brass
Pilot seat.......................................................................PTCFE
Dome seat ....................................................................Viton
Seals/piston O-ring.......................................................Viton
Dome seat backup ring .............................................. Teflon
Filter................................................102 micron stainless steel
Seat return spring................................302/316 stainless steel
Pressure adjusting spring .....................................Spring steel
Adjusting knob ........................Acrylonitrile Butadiene Styrene
SPECIFICATIONS
Inlet pressure............................................................3000 psig
Delivery pressure ..................................................50-550 psig
Inlet & outlet ports ..........................................1/2"-14 NPT (F)
Gauges .......................................H.P. 2" 4000 psig/28000 kPa
........................................................L.P. 2" 600 psig/4200 kPa
Temperature operating range.....................................0-140F
Outlet pressure rise..............................1.04 psig per 100 psig
inlet decay
Flow coefficient..........................................................Cv= 1.02
Weight .................................................................5 lbs (2.3 kg)
32
Dome
XXX
XXX
XXX
Series
Delivery
Inlet Fitting
Outlet Fitting
D1
550
8F - 1/2NPT (F)
8F - 1/2NPT (F)
Dome Regulator
50-550 psig
Description
D1-550-8F-8F
33
Part No.
0782-9276
Features
Stainless steel diaphragm regulators
High purity assist gas delivery pressures up to 550 psig
High purity manifolds
High flow, constant delivery pressure
Laser
Product Menu
Model Number
Description
Applications
Page
VHP 2100
Lasing Gas
64
PDS 600
Lasing Gas
60
Lasing Gas
68
Assist Gas
32
PSB-1 or PSB-2
D1 Regulator
HPT 500
Beam Purge
16
GLC 350
Assist Gas,
Beam Purge
54
34
Assist Gas
Laser
Recommended Product:
Assist Gas
Recommended Product:
PDS600
35
CRS100
Corrosion Resistant
Brass & Chrome-Plated Regulators
Corrosion-Resistant Regulators
TYPICAL APPLICATIONS
High-purity, corrosive gas handling including
Boron trichloride/boron trifluoride
Carbonyl fluoride
Chlorine/chlorine trifluoride
Hydrogen bromide/hydrogen
chloride/hydrogen fluoride
Nitrosyl chloride
Phosphorous pentafluoride
Silicon tetrafluoride
Sulfur tersfluoride
MATERIALS OF CONSTRUCTION
FEATURES
SPECIFICATIONS
Quality Components
Installation Flexibility
Options
Diffusion resistant, packless diaphragm shut-off valve
Outlet valve with MonelTM body, stem, tip and
TeflonTM packing
36
Corrosion-Resistant Regulators
200
Inlet pressure
(Nitrogen @ 70F)
2000 psig
250 psig
150
100
50
200
400
600
Thousands
AIR FLOW (SCFH)
Tested with outlet valve full open and outlet pressure taken at regulator L.P. gauge port.
XXX
Series
Delivery
CRS100
80 4-80 psig
160 0-160 psig
Single Stage
Corrosion Resistant
CRS110
Single Stage
Corrosion Resistant
XXX
XXX
XXX
XX
Outlet Gauge
Pressure
Inlet Fitting
Outlet Fitting
Options
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
CGA 240
CGA 330
CGA 350
CGA 580
CGA 660
4F 1/4 FNPT
00 Bare body
02 Helium Leak
37
Certification
03 Certification
CRS110-160-330-4S-02
CRS200
Corrosion Resistant
Electroless Nickel-Plated Regulators
Corrosion-Resistant Regulators
TYPICAL APPLICATIONS
High-purity, corrosive gas handling including
Boron trichloride/boron trifluoride
Carbonyl fluoride
Chlorine/chlorine trifluoride
Hydrogen bromide/hydrogen
chloride/hydrogen fluoride
Nitrosyl chloride
Phosphorous pentafluoride
Silicon tetrafluoride
Sulfur tersfluoride
MATERIALS OF CONSTRUCTION
FEATURES
Filter.................................................Electroless nickel-plated
sintered bronze
Adjusting screw.....................Acrylonitrile Butadiene Styrene
SPECIFICATIONS
Quality Components
Installation Flexibility
Multi-seat design with rotatable seat block
Options
Outlet valve with MonelTM body, stem, tip and
TeflonTM packing
38
Corrosion-Resistant Regulators
200
Inlet pressure
(Nitrogen @ 70F)
2000 psig
250 psig
150
100
50
2
Thousands
AIR FLOW (SCFH)
Tested with outlet valve full open and outlet pressure taken at regulator L.P. gauge port.
CRS200
Single Stage
Corrosion Resistant
CRS210
Single Stage
Corrosion Resistant
XX
Delivery
Outlet Gauge
Pressure
Inlet Fitting
Outlet Fitting
Options
80 4-80 psig
160 0-160 psig
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
CGA 240
CGA 330
CGA 350
CGA 580
CGA 660
4F 1/4 FNPT
00 Bare body
02 Helium Leak
39
Certification
03 Certification
CRS110-160-330-4S-02
PR150
TYPICAL APPLICATIONS
FEATURES
Durable for Corrosive Gas
CGA 600 valve
User Friendly
Control valve permits constant flow and easy on/off
Quality Components
1.5 gauges
Options
4 preset flows: 2.5 lpm, .5 Ipm,1.0 lpm, 1.5 lpm
MATERIALS OF CONSTRUCTION
Body..........................................................Brass bar stock
Spring housing cap ..........Chrome-plated brass bar stock
Diaphragm ..................Teflon lined 316L stainless steel
Seat ....................................................................PCTFE
Piston........................................................................Brass
Piston O rings....................................................Buna-N
SPECIFICATIONS
Maximum inlet pressure.......................................500 psig
Temperature operating range: ...........0 to 40F (-17 to 60C)
Outlet fitting..............................................3/16 Hose barb
Inlet fitting ...........................................................CGA 600
40
Model Number
PR150-025-600
PR150-025-600
PR150-05-600
PR150-1-600
Flow Rate
.25 LPM Air
.5 LPM Air
1.0 LPM Air
1.5 LPM Air
PR160
TYPICAL APPLICATIONS
Disposable cylinders of non-corrosive gases
User Friendly
Control valve permits constant flow and easy on/off
Quality Components
1.5 gauges
Options
9 preset flows: .25 lpm, .3 Ipm, 5 lpm, 1.0 lpm
1.5 lpm, 2.0 Lpm, 2.5 lpm, 5 lpm, 6.0 lpm
MATERIALS OF CONSTRUCTION
Body..........................................................Brass bar stock
Spring housing cap ..........Chrome-plated brass bar stock
Diaphragm ..................Teflon lined 316L stainless steel
Seat....................................................................PCTFE
Piston .......................................................................Brass
Piston O rings....................................................Buna-N
SPECIFICATIONS
Maximum inlet pressure.....................................1000 psig
Temperature operating range: .........0 to 140F (-17 to 60C)
Inlet fitting ...........................................5/8-18 UNF (C-10)
Outlet fitting .............................................3/16 Hose barb
Model PR150
PR150 Ordering
Ordering Information
Information
Model
Part No.
0781-1080
0781-1087
0781-1081
0781-1082
0781-1083
0781-1088
0781-1084
0781-1085
0781-1086
41
Model Number
PR160-025
PR160-03
PR160-05
PR160-1
PR160-15
PR160-2
PR160-25
PR160-5
PR160-6
Flow Rate
.25 LPM Air
.5 LPM Air
1.0 LPM Air
1.5 LPM Air
.25 LPM Air
.5 LPM Air
1.0 LPM Air
1.5 LPM Air
1.5 LPM Air
FEATURES
!
NEW
PR190
Calibration gas regulators are for use with disposable cylinders. These regulators are designed for non-corrosive gas
service and are single stage, piston style regulators. the control valve permits constant gas flow and easy on/off.
TYPICAL APPLICATIONS
Disposable cylinders of non-corrosive gases
MATERIALS OF CONSTRUCTION
FEATURES
Body...................................................7075-T65-11 Aluminum
SPECIFICATIONS
Maximum inlet pressure ...........................1,000 to 3,000 psig
Outlet flow settings (orifice) ............0.2 lpm, 0.3 lpm, 0.5 lpm,
1 lpm, 1.5 lpm, 2.5 lpm,
5 lpm, 6 lpm
Inlet fitting ........................................................................C-10
Outlet fitting ....................................................3/16 hose barb
Temperature operating range ...........0 to 140F (-17 to 60C)
42
4.20
1.40
3.67
3.05
.88
PR190 Regulator
.88
1.40
2.45
Model Number
PR191-B-06-C10C-0
PR191-B--06-660-01
PR191-B-06-180-01
PR191-B-06-4F-01
PR191-B-06-C10S-01
PR191-B-06-330-01
PR191-B-06-C10C-01
PR191-B-06-C10S-01
Flow Rate
0-6 lpm
0-6 lpm
0-6 lpm
0-6 lpm
0-6 lpm
0-6 lpm
0-6 lpm
0-6 lpm
43
Inlet Connection
C-10, Chrome
CGA 660 SST.
CGA 180 SST.
NPT (Female)
C-10 SST.
CGA 330 SST.
C-10, Chrome
C-10 SST.
1.50 GAUGE
LB150
Lecture Bottle
Chrome-Plated Brass Regulators
TYPICAL APPLICATIONS
MATERIALS OF CONSTRUCTION
FEATURES
Body.................................................Chrome-plated brass
Precision Performance
Diaphragm .........................................................Neoprene
Quality Components
Nozzle ......................................................................Brass
Seat ..............................................................Polyurethane
Seals ........................................................................Nylon
Poppet ......................................................................Brass
Options
Outlet valve
Body ......... Chrome-plated brass
Stem ......... Brass
Packing ..... Teflon
SPECIFICATIONS
Maximum inlet pressure ....................................3000 psig
Temperature operating range:.......0 to 1140F (-17 to 60C)
Delivery pressure rise:..............<.3 psig/100 psig inlet decay
Outlet pressure ranges.....................................15 (2-15 psig)
60 (4-60 psig)
Valve outlet
1/4" NPT (F)
44
LB-150-60 Flow
90
80
70
60
50
40
30
20
10
0
0.2
0.4
0.6
Thousands
FLOW (SCFH)
0.8
1.00
LB150
Lecture Bottle
XXX
Delivery
15 2-25 psig
60 4-60 psig
XXX
Outlet Gauge
Pressure
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
XXX
XXX
XX
Inlet Fitting
Outlet Fitting
Options
CGA 170
CGA 180
2F 1/8 Female NPT
00 Bare body
02 Helium Leak
45
Certification
03 Certification
LB150-15-180-4m
LB165
TYPICAL APPLICATIONS
FEATURES
Durable for Corrosive Gas
2 Stainless steel body with 4 ports
1-1/2 stainless steel diaphragm
MATERIALS OF CONSTRUCTION
Body .........................................................316 stainless steel
Spring housing cap ..................................nickel-plated brass
Diaphragm ................................................316 stainless steel
Nozzle.......................................................316 stainless steel
Seat..........................................................................PCTFETM
Seals....................................................TeflonTM and PCTFETM
Poppet ......................................................316 stainless steel
Quality Components
SPECIFICATIONS
Options
Captured vent allows for remote venting of gas
46
GE
ET
TL
OU
AU
TG
.64
LE
E
UG
GA
60
IN
60
4.79
REASE
INC
1.98
2.00
CREASE
DE
.750
10-32 UNF
THREAD (TYP.)
40
40
20
15
0
800
400
1200
FLOW (SCFH)
LB165
Lectur Bottle
XXX
Delivery
15 2-25 psig
60 4-60 psig
XXX
Outlet Gauge
Pressure
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
XXX
XXX
XX
Inlet Fitting
Outlet Fitting
Options
CGA 180
2F 1/8 Female NPT
04 CAPTURED VENT
47
LB165-15-180-4M
INLET PORT
OUTLET PORT
GPS270/280
General Purpose, Single Stage
Chrome-Plated Brass Regulators
GPS270/280 regulators are recommended for inert and noncorrosive gas applications where slight variance in delivery
pressure is acceptable (as cylinder pressure decreases).
GPS270
GPS272
GPS280
GPS281
TYPICAL APPLICATIONS
MATERIALS OF CONSTRUCTION
FEATURES
Quality Components
Options
Outlet valve
Body ......... Chrome-plated forged brass
Stem ......... Brass
Packing ..... Teflon
Tip ............ Stainless steel ball
Seals .........................................................................NylonTM
Filter.............................................................Sintered bronze
Seat return Spring .........................................Stainless steel
Pressure adjusting knob ......................................Music wire
SPECIFICATIONS
Maximum inlet pressure ...............(GPS270, 272) 3000 psig
(GPS280, 282) 400 psig
Temperature operating range: .............0 to 140F (-17 to 60C)
Delivery pressure rise:................<.85 psig/100 psig inlet decay
Flow coefficient.........................................................Cv= .18
Outlet pressure ranges.....................................15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
48
120
125 100
80
60
80
Diagonal Line
Indicates Flow
Restriction of
Outlet Valve
40
40
20
15
0
500
1000
1500
2000
FLOW (SCFH)
2500
3000
XXX
Series
Delivery
GPS270
15 2-15 psig
40 2-40 psig
80 40-80 psig
125 5-125 psig
General Purpose
Single Stage
GPS272
General Purpose
Single Stage
GPS280
XXX
Outlet Gauge
Pressure
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
General Purpose
Single Stage
GPS282
General Purpose
Single Stage
XXX
XX
Inlet Fitting
Outlet Fitting
Options
CGA 300
CGA 320
CGA 326
CGA 346
CGA 350
CGA 510
CGA 540
CGA 580
CGA 590
00 Bare body
15 Panel Mount
XXX
49
GPS270-125-580-4S-02
GPT270/280
General Purpose, Two Stage
Chrome-Plated Brass Regulators
GPT270/280 regulators are recommended for inert and noncorrosive gas applications where constant delivery pressure
is required (as cylinder pressure decreases).
GPT270
GPT272
GPT280
GPT281
TYPICAL APPLICATIONS
MATERIALS OF CONSTRUCTION
FEATURES
Quality Components
Options
Outlet valve
Body ......... Chrome-plated forged brass
Stem ......... Brass
Packing ..... Teflon
Tip ............ Stainless steel ball
Seals .........................................................................NylonTM
Filter ............................................................Sintered bronze
Seat return Spring.........................................Stainless steel
Pressure adjusting knob......................................Music wire
SPECIFICATIONS
Maximum inlet pressure...............(GPT270, 272) 3000 psig
(GPT280, 282) 350 psig
Outlet valve .......................................................1/4" NPT (M)
Temperature operating range:.............0 to 140F (-17 to 60C)
Delivery pressure rise: .................<.1 psig/100 psig inlet decay
Flow coefficient ........................................................Cv= .08
Outlet pressure ranges.....................................15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
50
120
125 100
80
60
80
Diagonal Line
Indicates Flow
Restriction of
Outlet Valve
40
40
20
15
0
500
1000
1500
2000
FLOW (SCFH)
2500
3000
Series
Delivery
GPT270
15 2-15 psig
40 2-40 psig
80 40-80 psig
125 5-125 psig
General Purpose
Two Stage
GPT272
General Purpose
Two Stage
GPT280
XXX
XXX
Outlet Gauge
Pressure
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
General Purpose
Two Stage
GPT282
General Purpose
Two Stage
XXX
XXX
XX
Inlet Fitting
Outlet Fitting
Options
00 Bare body
15 Panel Mount
only)
CGA 540
CGA 580
CGA 590
Note: Not all delivery pressure and inlet fitting are available for each model.
51
GPL270/280
Line Regulator
Chrome-Plated Brass Regulators
GPL270/280 regulators are recommended for inert and noncorrosive gas applications where gas is supplied through a
distribution system (pipeline).
TYPICAL APPLICATIONS
MATERIALS OF CONSTRUCTION
FEATURES
Quality Components
Options
Seat ...................................................................Polyurethane
Outlet valve
Body ......... Chrome-plated forged brass
Stem ......... Brass
Packing ..... Teflon
Tip ............ Stainless steel ball
Seals ...........................................................................NylonTM
Filter ..............................................102 micron stainless steel
Seat return Spring ...........................................Stainless steel
Pressure adjusting knob........................................Music wire
Adjusting knob .................Acrylonitrile Butadiene Styrene (ABS)
SPECIFICATIONS
Maximum inlet pressure............................................350 psig
Temperature operating range: .........0 to 140F (-17 to 60C)
Flow coefficient ..........................................................Cv= .33
Ports ...................................................................1/4" NPT (F)
Outlet pressure ranges.....................................15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
52
120
125 100
* Indicated 50 psig
inlet pressure
80
80
60
40
40
20
15
0
200
400
Series
Delivery
GPL270
15 2-15 psig
40 2-40 psig
80 40-80 psig
125 5-125 psig
General Purpose
Two Stage
GPL272
General Purpose
Two Stage
GPL280
XXX
XXX
Outlet Gauge
Pressure
XXX
XXX
XX
Inlet Fitting
Outlet Fitting
Options
00 Bare body
15 Panel Mount
15 (2-30 psig)
40 (2-60 psig)
80 (4-100 psig)
125 (5-200 psig)
General Purpose
Two Stage
Note: Not all delivery pressure and inlet fitting are available for each model.
53
GLC350
Liquid Cylinder
Chrome-Plated Brass Regulators
TYPICAL APPLICATIONS
Bulk gas distribution
Laser gas systems
Laboratories
Note: For high flow applications, see HPL700 pages 30-31
FEATURES
Quality Components
MATERIALS OF CONSTRUCTION
Body..........................................Chrome-plated forged brass
Spring housing cap...................Chrome-plated forged brass
Diaphragm......................................................Stainless steel
Nozzle...........................................................................Brass
Seat .....................................................................NeopreneTM
Seals.......................................................Buna-N and VitonTM
Filter ...............................................02 micron stainless steel
Seat return Spring ..........................................Stainless steel
Pressure adjusting knob.......................................Music wire
Adjusting knob...........Acrylonitrile Butadiene Styrene (ABS)
SPECIFICATIONS
Maximum inlet pressure...........................................500 psig
Temperature operating range: ........0 to 140F (-17 to 60C)
Inlet ...................................................................CGA 580, 4F
320, 540
Outlet pressure ranges.....................................40 (2-40 psig)
200 (10-200 psig)
Outlet.................................................................1/4" NPT (M)
54
160
140
120
100
80
60
40
20
0
0.2
0.4
0.6
0.8
1
(Thousands)
1.2
1.4
1.6
1.8
FLOW (SCFH)
Part Number
Delivery Range
GLC-350-40-580-BV
0784-3270
CGA 580
2-40 psig
GLC-350-200-580-BV
0784-3234
CGA 580
10-200 psig
GLC-350-200-4F-BV
0784-4204
CGA 250
10-200 psig
GLC-350-40-320-BV
0784-4337
CGA 320
2-40 psig
GLC-350-200-320-BV
0784-4338
CGA 320
10-200 psig
GLC-350-40-540-BV
0784-4339
CGA 540
2-40 psig
GLC-350-200-540-BV
0784-4161
CGA 540
10-200 psig
55
SR300 Series
Miscellaneous Regulators
TYPICAL APPLICATIONS
Carbon dioxide flow/pressure monitoring
FEATURES
Designed for Carbon Dioxide
Aluminum heat sink fins permit consistent
high flow without freeze-up
Quality Components
Fabric reinforced neoprene diaphragms
2 gauges, high pressure dual scale,
low pressure single scale
Aluminum body and housing cap
Self reseating relief valve. Not designed to
protect downstream apparatus
MATERIALS OF CONSTRUCTION
Body ................................................................Aluminum
Spring housing cap .........................................Aluminum
Diaphragm............................Fabric reinforced neoprene
Outlet range: SR 310 ...................................10-150 psig
Maximum outlet ranges: SR 310 ...........................200 SCFH
SR 311 ...........................100 SCFH
SR 312 ...........................100 SCFH
Outlet connection............................................5/8-18" (F) RH
Optional 1/4" NPT (M) connection available.
Order part no. 0950-0163 if required
Specifications
Maximum inlet pressure ..................................1500 psig
Weights: SR310 ..................................2 lbs. 5 oz. (1kg)
SR311 ..............................2 lbs. 15 oz. (1.3kg)
SR312................................2 lbs. 15 oz. (1.3kg
Model Number
Delivery Range
Max SCFH
CGA
0781-0355 SR310-320
0-150 psig
200
CGA 320
0781-0353 SR311-320
Preset@ 80 psig
100
CGA 320
0781-0354 SR312-320
100
CGA 320
Adjustable/Flowgauge
Flow meter
Flow meter
56
MBG-A
Miscellaneous Regulators
TYPICAL APPLICATIONS
Blood gas analysis
FEATURES
Quality Components
11/4 neoprene diaphragm
2 chrome-plated gauges
Self reseating relief valve. Not designed to
protect downstream apparatus
MATERIALS OF CONSTRUCTION
Body ..........................................................Chrome-plated brass
Spring housing cap....................................Chrome-plated brass
Diaphragm ................................................................NeopreneTM
Seat........................................................................Polyurethane
Seals.................................................................................Nylon
Filter: .........................Inlet-sintered bronze, Cartridges-sintered
stainless steel, 50 micron rating
Seat return spring ................................................Stainless steel
Pressure adjusting spring ..........................................Music wire
Adjusting knob .....................Acrylonitrile Butadiene Styrene (ABS)
Specifications
Maximum inlet pressure ..............................................3000 psig
Temperature operating range: ..............0 to 140F (-17 to 60C)
Outlet range..................................................................2-15 psig
Outlet port ...............................................................1/8" NPT (F)
Series
Delivery Range
0781-0355
MBG-A
15 2-15 psig
Outlet Range
Inlet Fitting
Outlet fitting
Options
CGA 200
None
57
PDS
PDS manifolds are designed to change between
a primary side, or bank, and a reserve bank of
high pressure cylinders. They are available with
(600) or without (500) a delivery pressure regulator
and are offered in brass or stainless steel.
VHP
VHP manifolds are enclosed in a cabinet for
security and cleanliness. They are available with
both fully and semi-automatic switchover
functionality. Other options include indicator lights,
remote alarms and an LCD screen
Brass
Brass manifolds are designed for non-corrosive
applications where two or more cylinders are
needed to supply critical processes.
Stainless
Stainless manifolds are suitable for corrosive gas
applications where two or more cylinders are
needed to supply critical processes.
58
Center Section
Header (RIGHT)
Header (LEFT)
CGA
Length/Style
PDS500B
(Brass)
1RW
2RW
3RW
4RW
5RW
6RW
1RW
2RW
3RW
4RW
5RW
6RW
240
330
24FTCVFA
24Flexible
Teflon Lined
Check Valve
*Optional header
configurations are
available
*Optional header
configurations are
available
PDS500S
(Stainless Steel)
PDS600B
(Brass)
PDS600S
(Stainless Steel)
Air (Industrial)
590
Argon
580
24FS
24 Flexible
ST. ST. Lined
24RC
Carbon Dioxide 24 Rigid Copper
320
24RCCV
Helium
24 Rigid Copper
580
Check Valve
VHP200B
(Brass)
VHP200S
(Stainless Steel)
Hydrogen
350
VHP2100B
(Brass w/lights)
Nitrogen
580,
VHP2100S
(Stainless Steel
w/lights)
24FTL
24 Flexible
Teflon Lined
Methane
350
Nitrous Oxide
326
PSB
(Brass)
Oxygen
540
660
705
PSS
(Stainless Steel)
Air (Breathing)
346
Acetylene VHP2100B-2RW-2LW-580-24FTLV
Oxygen VHP2100B-IRWC-ILWC-540-72FPCV
59
PDS600
Switchover Manifold
Brass and Stainless Steel
Switchover manifolds
FEATURES
Metal-to-metal diaphragm seals
Helium leak rate of 1x10-9 scc/sec. All high purity
regulators are inboard leak checked with a helium
mass spectrometer
2 dual scale gauges (psi/kp2)
Cartridge-type seat assemblies with 10 micron
inboard filter
180 degree lever with arrow indicates which side
of the manifold is the active side
Rotating captured vent for remote venting of
process gases (optional)
Regulator bodies are mounted on rear bracket
Audible and visual alarms (optional)
New control knob allows precise setting for maximum
delivery and locking is easily attained by pressing
in the cap
SPECIFICATIONS
Maximum inlet pressure ................ 3000 psig
Maximum output flow rat ............... See Performance Data
Outlet pressure ranges .................. 15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125 psig)
Switchover Pressures ..........Right to Left Bank: 200 psig
Left to Right Bank: 165 psig
Inlet & Outlet ports ...............1/4 Female NPT
Temperature Operating Range ... -40 to 140F (-40 to 60C)
Outlet pressure rise ................... PDS 600: None
Flow coefficient .......................... Cv = .05
Weight. ...................................... 12 lbs. (5.4 kgs)
Mounting Hole Spacing. ............ 8.5H x 2.5V
BRASS Model
MATERIALS OF CONSTRUCTION
Body ..............................................................Brass bar stock
Spring housing cap ..................................Nickel-plated brass
Diaphragm ..............................................316L stainless steel
Nozzle ...........................................................................Brass
Seat.........................................................................PCTFE
Seals .........................................................................Teflon
Poppet ...........................................................Brass bar stock
Inboard filter......................10 micron sintered stainless steel
Seat return spring ...........................................Stainless steel
Pressure adjusting spring ...............Heat-treated spring steel
Adjusting knob .................................................Polypropylene
STAINLESS Model
MATERIALS OF CONSTRUCTION
Body .......................................316L Stainless steel bar stock
Spring housing cap ..................................Nickel-plated brass
Diaphragm ..............................................316L stainless steel
Nozzle ....................................................316L Stainless steel
Seat.........................................................................PCTFE
Seals .........................................................................Teflon
Poppet....................................................316L Stainless steel
Inboard filter......................10 micron sintered stainless steel
Seat return spring ..................................316L Stainless steel
Pressure adjusting spring ...............Heat-treated spring steel
Adjusting knob .................................................Polypropylene
60
Switchover manifolds
140
120
100
80
60
40
20
0
200
400
600
800
1000
1200
1400
1600
1800
XXX
XXX
XXX
XXX
Center Section
Delivery
Header Right
Header Left
PDS600B
15
40
80
125
1 RW
1 LW
2 RW
2 LW
3 RW
3 LW
Stainless Steel
4 RW
4 LW
Brass
PDS600S
Stainless Steel
6 RW
6 LW
See note*
See note*
61
CGA INLET
Brass
XX
Stainless Steel
Pigtail
24 Flex
36 Flex
See note
PDS500
Switchover Manifold
Brass and Stainless Steel
Switchover manifolds
FEATURES
Metal-to-metal diaphragm seals
Helium leak rate of 1x10-9 scc/sec. All high purity
regulators are inboard leak checked with a helium
mass spectrometer
2 dual scale gauges (psi/kp2)
Cartridge-type seat assemblies with 10 micron
inboard filter
2 brass bar stock body regulators with ports for
high and low pressure transducers or alarm switches
180 degree lever with arrow indicates which side of
the manifold is the active side
360 rotating captured vent for remote venting of
process gases (optional)
Regulator bodies are mounted on rear bracket
Audible and visual alarms (optional)
BRASS Model
MATERIALS OF CONSTRUCTION
Body .....................................Chrome-plated brass bar stock
Spring housing cap ..............................Chrome-plated brass
Diaphragm..............................................316L stainless steel
Nozzle ...........................................................Brass bar stock
Seat ........................................................................PCTFE
Seals .........................................................................Teflon
Poppet ...........................................................Brass bar stock
Inboard filter .....................10 micron sintered stainless steel
Seat return spring..................................316L Stainless steel
Pressure adjusting spring...............Heat-treated spring steel
Adjusting knob.................................................Polypropylene
SPECIFICATIONS
Maximum inlet pressure ................ 3000 psig
Maximum output flow rate ............. See Performance Data
Outlet pressure ranges:
Right as primary: ...... 250 psig
Left as primary ......... 165 psig
Left bank preset: ...... 200 psig
Switchover Pressures:
Right to Left Bank: 200 psig
Left to Right Bank: 165 psig
Inlet &Outlet ports ..................... 1/4 Female NPT
Temperature Operating Range ... -40 to 140F (-40 to 60C)
Outlet pressure rise ............. <.53 psig/100 psig inlet decay
Flow coefficient .................... Cv = .05
Weight ................................. 8.5 lbs. (3.8 kgs)
Mounting Hole Spacing ....... 8.5H x 2.5H
STAINLESS Model
MATERIALS OF CONSTRUCTION
Body.......................................316L Stainless steel bar stock
Spring housing cap ..............................Chrome-plated brass
Diaphragm..............................................316L stainless steel
Nozzle....................................................316L Stainless steel
Seat ........................................................................PCTFE
Seals .........................................................................Teflon
Poppet ...................................................316L Stainless steel
Inboard filter .....................10 micron sintered stainless steel
Seat return spring..................................316L Stainless steel
Pressure adjusting spring...............Heat-treated spring steel
Adjusting knob.................................................Polypropylene
62
Switchover manifolds
140
120
100
80
60
40
20
0
200
400
600
800
1000
1200
1400
1600
1800
XXX
XXX
XXX
Center Section
Header Right
Header Left
PDS500B
1 RW
1 LW
2 RW
2 LW
3 RW
3 LW
Stainless Steel
4 RW
4 LW
Brass
PDS500S
Stainless Steel
6 RW
6 LW
See note*
See note*
63
CGA INLET
Brass
XX
Stainless Steel
Pigtail
24 Flex
36 Flex
See note
VHP
Manifolds
Switchover Manifolds
FEATURES
500 Series barstock regulators - High Purity
for critical applications
In service and reserve indicator lights standard
Metal-to-metal seals for high helium leak integrity
Adjustable line regulator for constant delivery
Line regulator enclosed in box for tamper resistant protection
Easy 180 lever to select primary gas source
VHP 2100 Model incorporates pressure switches for
remote alarm activation to indicate gas depletion
VHP 2100 model only
SPECIFICATIONS
Maximum inlet pressure ............ 3000 psig
Outlet pressure ranges ............. 15 (2-15 psig)
40 (2-40 psig)
80 (4-80 psig)
125 (5-125psig)
Switchover Pressures:
Right to Left Bank: 200 psig
Left to Right Bank: 165 psig
Inlet & Outlet ports .................... 1/4 NPT (F)
Temperature Operating Range ... -40 to 140F (-40 to 60C)
Outlet pressure rise ................... None
Flow coefficient ......................... .05
Weight ....................................... 30 lbs
BRASS Model
MATERIALS OF CONSTRUCTION
Body..............................................................Brass bar stock
Spring housing cap .................................Nickel-plated brass
Diaphragm..............................................316L stainless steel
Nozzle...........................................................................Brass
Seat ........................................................................PCTFE
Seals.........................................................................Teflon
Poppet...........................................................Brass bar stock
Inboard filter .....................10 micron sintered stainless steel
Seat return spring ..................................316L stainless steel
Pressure adjusting spring ..............Heat-treated spring steel
Adjusting knob.................................................Polypropylene
Enclosure ........................................16 Gauge power coated
Tubing ..................................................................1/4 copper
Fittings ..................................................................Brass tube
64
Switchover Manifolds
140
120
100
80
60
40
20
200
400
600
800
1000
PDS500
XXX
XXX
XXX
XX
CGA INLET
Center Section
Delivery Pressure
Header Right
Header Left
Brass
VHP2000B
15
1 RW
1 LW
40
2 RW
2 LW
24 Flex
36 Flex
Stainless Steel
80
3 RW
3 LW
See note
VHP2100B
125
4 RW
4 LW
VHP2100S
300
Stainless Steel
240, 330, 660, 705
Brass
VHP2000S
Brass
Stainless Steel
6 RW
6 LW
See note*
See note*
Stainless Steel
Pigtail
65
Our brass manifolds are designed for high purity non-corrosive gas
applications where two or more cylinders are needed to supply critical
processes.
Switchover Manifolds
The materials of construction will not off-gas and contaminate the gas
stream. The design is highly resistant to inboard diffusion of
atmospheric conditions. Flexible braided stainless steel pigtails, lined
with stainless steel are standard.
TYPICAL APPLICATIONS
Gas Chromatography
Process Analyzers
Laser Gas Systems
High Purity Gas Systems
Non-Corrosive Gases
Corrosive Gases
FEATURES
SPECIFICATIONS
Maximum inlet pressure .................................................3000 psig
Inlet connections ..................................................standard CGAs.
Outlet connections................................................standard CGAs.
MATERIALS OF CONSTRUCTION
Pipe .......................................................................................Brass
Tees ......................................................................Brass bar stock
Valves.............................................................Packless diaphragm
Pigtails ......................................................Stainless steel braided,
Stainless steel lined
XXX
XXX
HEADER
Header Right
Header Left
HPRB
HPLB
2 RW
2 LW
3 RW
3 LW
4 RW
4 LW
6 RW
6 LW
See note*
See note*
XXX
XXXX
CGA INLET
Pigtail
CGA
24FSCV
4F
4M
66
Our stainless steel manifolds are designed for corrosive and noncorrosive gas applications where two or more cylinders are needed to
supply critical processes.
TYPICAL APPLICATIONS
Gas Chromatography
Process Analyzers
Laser Gas Systems
High Purity Gas Systems
Non-Corrosive Gases
FEATURES
SPECIFICATIONS
Maximum inlet pressure .................................................3000 psig
Inlet connections...................................................standard CGAs.
Outlet connections ................................................standard CGAs.
MATERIALS OF CONSTRUCTION
Pipe ..................................................................303 stainless steel
Tees .......................................................304 forged stainless steel
Valves.............................................................Packless diaphragm
Pigtails.......................................................Stainless steel braided,
stainless steel lined
XXX
XXX
HEADER
Header Right
Header Left
HPRS
HPLS
2 RW
2 LW
3 RW
3 LW
4 RW
4 LW
6 RW
6 LW
See note*
See note*
XXX
XXXX
CGA Inlet
Pigtail
CGA
24FSCV
4F
4M
67
Switchover Manifolds
The materials of construction will not off-gas and contaminate the gas
stream. The design is highly resistant to inboard diffusion of atmospheric conditions. Victor DRK diffusion resistant shut off valves.
Flexible braided stainless steel pigtails, lined with stainless steel are
standard.
Protocol
Stations
Protocol Stations
TYPICAL APPLICATIONS
Protocol Gases
Laboratory
CEM
Laser
FEATURES
Designed to accommodate single or two stage regulators
Constructed of stainless steel or brass
Regulator: CGA inlet connection designates stainless steel
(corrosive) or brass (non-corrosive) block gas service
Standard pigtails are stainless steel braided, stainless steel lined,
flexible hose with check valves prevent contamination during
cylinder changeout
SPECIFICATIONS
Maximum inlet pressure .....................................................3000 psig
Temperature range ................................See regulator specifications
Protocol station weight ..................................3.1 lbs. (less regulator)
MATERIALS OF CONSTRUCTION
Gas block ....................................... 316 stainless steel or
chrome-plated brass bar stock
Inlet connection ................................................316 stainless steel or
brass bar stock
XXX
Protocol Station
Number of Cylinders
PSB*
Brass
PSS**
XXX
XXX
CGA Inlet
Pigtail
CGA
24FSCV
XXXX
Option
CV
Check Valve
Stainless Steel
* PSB = Protocol Station, Brass w/Bracket
** PSS = Protocol Station, Stainless Steel w/Bracket
68
Protocol Stations
Without Regulators
BRASS
Part No.
Description
PSB-1-580-24FSCV*
1130-1241
PSB-2-580-24FSCV*
1130-1242
PSB-1-590-24FSCV*
1130-1243
PSB-2-590-24FSCV*
1130-1244
PSB-1-350-24FSCV*
1130-1245
PSB-2-350-24FSCV*
1130-1246
PSB-1-320-24FSCV*
1130-1247
PSB-2-320-24FSCV*
1130-1239
PSB-1-540-24FSCV*
1130-1240
PSB-2-540-24FSCV*
STAINLESS STEEL
Part No.
1130-1248
1. Regulator
(Single or Two Stage)
2. CGA Chrome CGA580 Adapter
0973-0041
Brass
CGA540 Adapter
CGA510 Adapter
CGA590 Adapter
CGA350 Adapter
CGA320 Adapter
4. Bracket
Bracket (Stainless)
Screws (2 needed)
4. Block
Chrome Block1131-0100
Stainless Steel Block 1131-0101
6. Nipple
Nipple (Chrome)
Nipple (Stainless)
7.Elbow
9. DRK Valve
10. Pigtail
580
540
590
350
320
(Brass)
10. Pigtail
(Stainless Steel)
0995-0026
3. Alarm Port
Description
PSS-1-660SS-24FSCV**
0967-0131
0970-0062
0974-0026
0983-0048
0985-0039
69
x
x
x
x
x
24 Pigtail
24 Pigtail
24 Pigtail
24 Pigtail
24 Pigtail
580SS
540SS
590SS
350SS
660SS
x
x
x
x
x
24 Pigtail
24 Pigtail
24 Pigtail
24 Pigtail
24 Pigtail
1106-0085
1400-0164
0901-0081
0901-0070
1123-0630
1123-0632
1123-0650
1123-0631
1123-0634
1123-0640
1123-0648
1123-0642
1123-0644
1123-0635
Protocol Stations
1130-1233
Valves
VSP610
VTP620
VSP610 SPECIFICATIONS/
MATERIALS OF CONSTRUCTION
VTP620 SPECIFICATIONS/
MATERIALS OF CONSTRUCTION
Purging Options: Purging is a process by which the system or regulator is pressurized, depressurized, and vented to remove any
atmospheric gas, air/moisture, or process gas. Internal Gas Purging is the process by which the process gas is used to purge the units.
External Gas Purging is when an inert gas is used to perform the same function. Gas purging is extremely useful and effective when done
correctly. It provides a way to remove any gas from dead ends efficiently and quickly. For toxic gases, gas purging is a safety requirement
to ensure minimal exposure to the operator. For corrosive gases, purging will remove moisture that can produce solid materials which will in
turn cause system failure. For high purity gases, gas purging will ensure that air and moisture are removed to maintain the integrity and
purity of the process gas.
70
VCP630
Cross Purge Assemblies
The VCP630 Cross Purges are recommended for use with
high purity gas applications to prevent contamination of
equipment during cylinder changes or system changes of
components.
The VCP630 purge provides safety by preventing the
release of toxic or corrosive gases into confined areas and
reduces corrosion of components by eliminating air and
moisture during gas source changeout.
Valves
VSP620 SPECIFICATIONS/
MATERIALS OF CONSTRUCTION
Body ................................... Brass or 316L Stainless Steel
Diaphragms ........................ 316L Stainless Steel
Seat .................................... PCTFE
Spring ................................. 316L Stainless Steel
Control Knob ....................... Polypropylene
Maximum inlet pressure ..... 3000 psi
71
DRK
Chrome-Plated Diffusion Resistant Valve
The packless, diffusion resistant shut off valve DRK series
assists in maintaining system purity. The copper diaphragm
feature is enveloped between two stainless steel
diaphragms and is available in both brass or chrome-plated
brass.
Valves
These outlet valves have a 1/4" NPT(F) inlet and outlet and
are capable of being certified to inboard helium leak rates
down to 1x10-9 scc/sec.
FEATURES
SPECIFICATIONS
Maximum inlet......................................................3000 psig
Temperature Operating Range ...................0 to 140F (-17 to 60C)
Inlet and outlet port............................................................1/4 NPT (F)
Flow coefficient..........................................................................Cv = .33
Weight ............................................................................................13 oz.
MATERIAL OF CONSTRUCTION
Body......................................................Chrome-plated brass or brass
Seat ......................................................................PCTFE
Seat holder .................................................................Brass
Gasket ..................................................................PCTFE
Diaphragm contacting gas ......................316L Stainless steel
Spring.....................................................................316L Stainless steel
Knob..............................................................Glass filled polypropylene
Seat guide holder..................................................................PCTFE
Ordering information
DRK Chrome-Plated Diffusion Resistant Valve
Model No.
Description
DRK-2-4C
Chrome-plated brass
21/4-18 Female NPT ports
DRK-2-4
Brass
21/4-18 Female NPT ports
0910-0081
Adapter,
NPTM x 1/4 NPTM, Chrome
1/4
72
DRK
Stainless Steel with Center Purge Valves
The DRK packless diffusion resistant shut-off valve is
designed for use in purge systems. It is available with four
(4) 1/4 -18 NPT (F) ports. The bodies are threaded for rear
panel mounting.
Center valves are capable of being certified to inboard
helium leak rates down to 1x10-9 scc/sec.
SPECIFICATIONS
Maximum inlet ......................................................3000 psig
Temperature Operating Range....................0 to 140F (-17 to 60C)
Inlet and outlet port ............................................................1/4 NPT (F)
Flow coefficient..........................................................................Cv = .33
Weight.............................................................................................13 oz.
MATERIAL OF CONSTRUCTION
Body.....................................................................1/4-18 NPT (F) ports
316L stainless steel or
1/4 VCR fittings
316L stainless steel
Seat ......................................................................PCTFE
Seat holder...............................................316L stainless steel
Gasket.................................................................. PCTFE
Diaphragm contacting gas.......................316L Stainless steel
Spring.....................................................................316L Stainless steel
Knob..............................................................Glass filled polypropylene
Seat guide holder..................................................................PCTFE
Ordering information
DRK Stainless Steel with Center Purge Valves
Model No.
Description
DRK-4-4S
Stainless steel
Four (4) 1/4 -18 Female NPT ports
73
Valves
FEATURES
DRK
Stainless Steel Full Turn Valve
The DRK series packless diffusion resistant shut-off valves
help maintain system purity and leak integrity. The bodies
are threaded for rear panel mounting. All welded vacuum
coupled ring (VCR) high performance face seal fittings or
1/4 NPT (F) versions are available.
Valves
FEATURES
Metal to metal seal
1-3/8 Hex bar stock body (1/4 NPT ports)
1-1/4 Round bar stock body ( VCR fittings)
Bonnet leak test port
Multiple diaphragms
Reset feature on 1/4 turn valve
Design capable of passing 1x10-9 scc/sec inboard helium
leak rate (production models are tested to 1x10-7 scc/sec)
Welded fitting models have VCR compatible fittings
semi-automatically butt welded
Welded models are electro- polished
All valves are 100% helium leak tested
SPECIFICATIONS
Maximum inlet...................................................3000 psig
Available porting - Choice of:..........1/4 NPT (F) ports or
1/4 VCR(F) fittings
Maximum leak rate across seat .....................1x10-9 scc/sec
Temperature Operating Range.......................- 400F to +1650F
Flow coefficient..............................................DRK - Cv = .33
DRL - Cv = .17
MATERIAL OF CONSTRUCTION
Body: Choice of ................................1/4 - 18 NPT (F) ports
316L Stainless steel or
1/4 VCR fittings
316L Stainless steel
Seat...................................................................PCTFE
Seat holder.......................................316L Stainless steel
Gasket...............................................................PCTFE
Diaphragm contacting gas ...................316L Stainless steel
Spring....................................................316L Stainless steel
Knob..............................................Glass filled polypropylene
Seat guide holder.................................................PCTFE
74
Valves
Ordering information
DRK Stainless Steel Full Turn Valve
Model No.
Description
DRK-2-4S
Stainless steel
21/4-18 Female NPT ports
DRK-2-VCR-FS
Stainless steel
21/4-18 Female NPT ports
0910-0070
Adapter,
NPTM x 1/4 NPTM, Chrome
1/4
75
Accessories
Regulator Parts and Accessories
Miniature Metering VCalve
Description
Accessories
SPECIFICATIONS
Maximum outlet ............................... 3000 psi
Temperature operating range ........... -250F to 2500F
Ordering Information
Part No.
0660-0081
0660-0091
0660-0080
Material
Brass
Stainless
Chrome
Swagelok
Brass Tube Fittings/ Compression Type
Description
Brass Swagelok tube fittings provide a leak resistant seal for
copper or brass tubing connections. Swagelok fittings come
completely assembled and finger-tight. Installation is made easy
by inserting the tube until tubing rests firmly against the shoulder
and the nut is finger-tight. Hold the fitting body with a back-up
wrench and tighten the nut one-and-one quarter turns.
Ordering Information
Part No.
0910-0062
0910-0092
0910-0001
Material
Brass
76
Gauges
Gauges for G.P. Regulators
Part
Diameter
4000#/28000 KPA
400#/2800 KPA
200#/1400 KPA
100#/700 KPA
60#/400 KPA
30#/200 KPA (red line)
30#/200 KPA
Number
1424-0210
1424-0211
1424-0212
1424-0213
1424-0214
1424-0216
1424-0217
Valves
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
Description
Note: All gauges listed above have chrome plated brass case and
one piece Lexan lens. Inlet connection 1/4 NPT (M)
Description
4000#/28000 KPA
400#/2800 KPA
200#/1400 KPA
100#/700 KPA
60#/400 KPA
30#/200 KPA (red line)
30 HG VAC/30#/200 KPA
Part Number
1424-0285
1424-0295
1424-0286
1424-0287
1424-0288
1424-0279
1424-0289
Note: All gauges listed above have chrome plated brass case and
one piece Lexan lens. Inlet connection 1/4 NPT (M)
Diameter
3000#/20000 KPA
400#/2800 KPA
30 HG VAC/200#/1400 KPA
30 HG VAC/100#/700 KPA
30 HG VAC/60#/400 KPA
30 HG VAC/30#/200 KPA
Part Number
1424-0311
1424-0316
1424-0315
1424-0314
1424-0313
1424-0312
Note: All gauges listed above have stainless steel case and one
piece Lexan lens. Inlet connection 1/4 NPT (M)
Diameter
30#
4000#
Part Number
1424-0120
1424-0166
Note: All gauges listed above have chrome plated brass case and
one piece Lexan lens. Inlet connection 1/4 NPT (M)
77
CGA Valve
Outlet
& Conn.
Acetylene . . . . . . . . . . . . . . . . . . . . .510
Air (Industrial) . . . . . . . . . . . . . . . . . .590
Outlet Connections
CGA Valve
Outlet
& Conn.
GAS
Freon 13
GAS
CGA Valve
Outlet
& Conn.
(Chlorotrifluoromethane) . . . . . . . . .660
Freon 13B1
(Bromotrifluoromethane) . . . . . . . . .660
Freon 14
(Tetrafluoromethane) . . . . . . . . . . .580
Freon 22
Monomethylamine . . . . . . . . . . . . . .705
Natural Gas . . . . . . . . . . . . . . . . . . .350
(Chlorodifluoromethane) . . . . . . . . .660
Freon 114
Neon . . . . . . . . . . . . . . . . . . . . . . . .580
Nickel Carbonyl . . . . . . . . . . . . . . . .660
(Hexafluoroethane) . . . . . . . . . . . . .660
Freon RC318
(Octafluorocyclobutane) . . . . . . . . .660
Genetron 21
(Dichlorofluoromethane) . . . . . . . . .660
Oxygen . . . . . . . . . . . . . . . . . . . . . .540
Perfluoro-2-Butene . . . . . . . . . . . . . .660
Perfluoropropane . . . . . . . . . . . . . . .660
chloropentafluoroethane) . . . . . . . .660
Genetron 152A
Phosgene . . . . . . . . . . . . . . . . . . . . .660
Phosphine . . . . . . . . . . . . . . . . . . . .350
Cyanogen . . . . . . . . . . . . . . . . . . . . .750
Propylene . . . . . . . . . . . . . . . . . . . . .510
Germane . . . . . . . . . . . . . . . . . . . . .350
Silane . . . . . . . . . . . . . . . . . . . . . . . .350
Cyclopropane . . . . . . . . . . . . . . . . . .510
Helium . . . . . . . . . . . . . . . . . . . . . . .580
Deuterium . . . . . . . . . . . . . . . . . . . .350
Hexafluoroacetone . . . . . . . . . . . . . .330
Diborane . . . . . . . . . . . . . . . . . . . . .350
Hexafluoropropylene . . . . . . . . . . . . .660
1,2-Dibromodifluoromethane . . . . . . .668
Hydrogen . . . . . . . . . . . . . . . . . . . . .350
Dimethylamine . . . . . . . . . . . . . . . . .705
Tetrafluoroethylene . . . . . . . . . . . . . .350
Trimethylamine . . . . . . . . . . . . . . . . .705
Ethane . . . . . . . . . . . . . . . . . . . . . . .350
Ethylene . . . . . . . . . . . . . . . . . . . . . .350
Isobutane . . . . . . . . . . . . . . . . . . . . .510
Isobutylene . . . . . . . . . . . . . . . . . . . .510
Xenon . . . . . . . . . . . . . . . . . . . . . . .580
Fluorine . . . . . . . . . . . . . . . . . . . . . .679
Krypton . . . . . . . . . . . . . . . . . . . . . .580
Freon 12
Methane . . . . . . . . . . . . . . . . . . . . . .350
(Dichlorodifluoromethane) . . . . . . . .660
NOTE: The above are standard CGA connections and are designated by Compressed Gas Association, Standard V-1. For alternate
and latest standards and connections, contact Compressed Gas Association, 1235 Jefferson Davis Hwy., Arlington, VA 22202.
78
These dimensional drawings illustrate cylinder valve outlet and connections. The drawing at the left side
illustrates the cylinder valve outlet. The one at right illustrates its mating regulator or valve connection.
Washer
1408-0071
Order No.s
Swivel
0998-0003**
8 NGT
818
Order No.s
Nut
0976-0003
Swivel
0976-0002
Order No.s
Nut
0968-0003
0968-0006*
Order No.s
Nut
0985-0030
0985-0031*
Swivel
0968-0014
0968-0051*
Washer
1408-0065
Swivel
0985-0004
0985-0008*
Order No.s
Nut
0963-0015
0963-0016*
Order No.s
Nut
0986-0007*
0986-0008**
Swivel
0963-0004*
0963-0010
WASHER
1408-0023
Swivel
0985-0006**
** Chrome
** Stainless Steel
79
Outlet Connections
SWIVEL
0980-0003
0980-0005*
Order No.s
Nut
0981-0002
0981-0006**
0981-0004*
Washer
1408-0070
Swivel
0981-0000
0981-0005**
0981-0003*
1618
Outlet Connections
Order No.s
Nut
0972-0015
0972-0016*
0972-0036**
Order No.s
Nut
0983-0003
0983-0039*
0983-0013**
Swivel
0972-0010
0972-0017*
0972-0035**
Swivel
0983-0008
0983-0040*
0983-0014**
Order No.s
Nut
0976-0000
Order No.s
Nut
0970-0003
0970-0011*
0970-0006**
Swivel
0970-0017*
Swivel
0970-0005
0970-0017*
0970-0051**
Order No.s
Nut
0967-0044
0967-0045*
0967-0052**
Order No.s
Nut
0973-0003
0973-0005*
0973-0004**
Swivel
0967-0034
0967-0042*
0967-0022**
Swivel
0970-0005
0970-0017*
0970-0051**
Order No.s
Nut
0974-0003
0974-0010*
0974-0004**
Order No.s
Nut
0995-0016*
0995-0003
0995-0007**
Washer
1408-0024
Swivel
0995-0017**
0995-0018*
Swivel
0970-0005
0970-0017*
** Chrome
** Stainless Steel
80
Glossary of Terms
Absolute Zero - The lowest temperature attainable. All molecular activity is considered ceased. Its value is -459.7 degrees
F or -273.15 degrees C.
Aerobic Mixture - Gas mixture containing oxygen. A control
atmosphere for the growth of biological cultures.
AIT (Auto Ignition Temperature) - The lowest temperature at
which a material will ignite and sustain combustion in the
absence of a spark or flame.
Anaerobic Mixture - Oxygen free gas mixture with carbon
dioxide used as an atmosphere for the growth of biological
cultures.
Corrosive - A substance that erodes and deteriorates materials with which it comes in contact, such as metals, fabrics
and human tissue.
Creep - The increase in outlet pressure of a pressure regulator. Gas from the high pressure side of the regulator is
leaking into the low pressure side causing the delivery set
pressure to increase. Usually this malfunction is more
detectable when the regulator is in a static (no flow) or low
flow condition.
81
Glossary of Terms
Glossary of Terms
Glossary of Terms
Rare Gas - Refers to those constituents of air which comprise
less than 1% of air and are generally considered inert
such as argon, helium, krypton, neon, and xenon.
Rise - The increase in delivery pressure as the cylinder pressure decreases. Rise is sometimes stated as the amount
of psig increase in delivery pressure per 100 psig
decrease in cylinder pressure.
Zero Gas - Gases which have low THC and are used as reference point to zero a THC analyzer.
STP (Standard Temperature and Pressure) - An internationally accepted reference set of conditions of temperature
and pressure. Standard temperature is 0 degrees C and
14.7 psia (1 atmosphere).
LB 150, LB 165
Relief
82
Conversion Factors
Flow Conversions
Pressure Conversions
Multiply by
To obtain
If pressure is given in
Multiply by
To obtain
ml/min.
ml/min.
ml/min.
ml/min.
ml/min.
L.P.M.
L.P.M.
L.P.M.
L.P.M.
L.P.M.
S.C.F.H.
1.0 x 10-3
3.5316 x 10-5
2.1189 x 10-3
2.6418 x 10-4
1.5852 x 10-2
1.0 x 103
3.5316 x 10-2
2.11896
2.6418 x 10-1
1.58508 x 101
.47192
L.P.M.
S.C.F.M.
S.C.F.H.
G.P.M.
G.P.H.
cc/min.
S.C.F.M.
S.C.F.H.
G.P.M.
G.P.H.
L.P.M.
4.912 x 10-1
3.613 x 10-2
2.036
27.73
6.804 x 10-2
1.47 x 101
1.45 x 101
13.57
3.937 x 10-2
5.343 x 101
407.631
PSIA
PSIA
Inches of Mercury
Inches of Water at 70F
Atmospheres
PSIA
PSIA
Inches of Water at 70F
Inches of Water at 70F
Inches of Water at 70F
Inches of Water at 70F
Temperature Conversions
If temperature
is given In
Degrees Centigrade
Degrees Centigrade
Degrees Fahrenheit
Degrees Fahrenheit
Degrees Rankine
Degrees Rankine
Density Conversions
Multiply by
(C + 17.78) x 1.8
(C + 273.16) x 1.8
(F - 32.0) x 5.56 x 10-1
(F x 1.0) + 459.70
(R x 1.0) - 459.70
(R x 5.56 x 101) - 273.16
To obtain
If density is
given In
Multiply by
To obtain
Fahrenheit
Rankine
Centigrade
Rankine
Fahrenheit
Centigrade
Pounds / ft3
Pounds / ft3
Pounds / in3
Pounds / in3
Grams / cm3
Grams / cm3
5.787 x 10-4
1.602 x 10-2
1.728 x 103
2.768 x 101
3.613 x 10-2
6.243 x 101
Pounds / in3
Grams / cm3
Pounds / ft3
Grams / cm3
Pounds / in3
Pounds / ft3
How to estimate the flow of gases other than air based on air flow data and gas temperature.
Table 1.
Q1 (f1)
Q2 =
f2
0
10
20
0.932 0.942 0.952
30
0.962
40
0.971
50
60
0.981 0.991
70
80
90
100
110
1.000
1.009
1.018
1.028
1.037
0120
1.046
220
1.133
230
1.141
240
1.149
250
1.157
160
1.081
170
1.090
180
190
1.099 1.107
200
1.116
83
210
1.124
Conversion Factors
If flow is
given In
Conversion Factors
Table 2.
Conversion Factors
Gas Name
Acetylene
Air
Ammonia
Argon
Boron Trifluoride
Butane
Carbon Dioxide
Carbon Monoxide
Cyclopropane
Dimethyl Ether
Ethane
Helium
Hydrogen
Hydrogen Bromide
Hydrogen Sulfide
Methane
Symbol
C2H4
--
Specific
Gravity
@
14.7 psia
& 70F 1
205 2
1.000
1.000
1775-2200
NH3
Ar
0.596
0.772
114.1
1.380
1.175
BF3
C4H10
2.217
1.489
CO2
CO
C3H6
(CH3)2O
2.071
761
--
1128 liq
928
Highly Flammable
662
Flammable
959
1.218
75
3
3
62.3
3
543
0.138
0.372
2490
Asphyxiant
--
H2
BHr
0.0695
0.624
2200
H2S
CH4
2.575
1.605
1075
320
--
500
1000
--
1.087
1.043
252
0.554
0.744
2265
3
1.137
60
0.781
1775-2665
900-1100
0.638
0.799
225-1800
Asphyxiant
--
NO
0.950
0.974
500
--
N2
N2O
0.967
0.983
2000-2490
--
--
1.530
1.236
745
Supports Combustion/Anesthetic
--
O2
C3H8
1.105
1.051
2200
1.554
1.246
109
0.610
1.175
136.5
3.525
1.878
140
4.169
2.042
800
1.381
Sulfur Tetrafluoride
Xenon
Xe
Highly Flammable
16.3
1.024
C3H6
SF4
--
1.049
Nitrogen
C2H6
HE
Nitric Oxide
1600-1800
1650
Ne
Propylene
--
0.983
1.484
--
Asphyxiant
.0967
1.164
--
635
1775-2490
830
1.354
Highly Flammable
AutoIgnition
Temp (F)
1204
1.236
Neon
Propane
1.439
Hazards
in
Handling
1.529
Natural Gas
Oxygen
0.952
1.292
Nitrous Oxide
(f2)2
=SP.GR.
Full
Cylinder
pressure @
70F (psig)
0.907
C3H4
--
Methylacetylene
f2
Flammable
874
874
927
Asphyxiant
--
84
ACETYLENE (C2H2)
PURIFIED 99.6%
AIR
DRY
HYDROCARBON FREE
ZERO
AMMONIA (NH3)
ANHYDROUS
ARGON (Ar)
RESEARCH 99.9995%
U.H.P. 99.999%
PREPURIFIED 99.998%
ZERO 99.998%
02 FREE 99.996%
HIGH PURITY 99.995%
ARSINE (AsH3)
MINIMUM PURITY 99.9995%
BORON TRIFLUORIDE (BF3)
MINIMUM PURITY 99.5%
1,3 BUTADIENE (C4H6)
INSTRUMENT 99.5%
C.P. 99.0%
N-BUTANE (C4H10)
RESEARCH 99.9%
C.P. 99.0%
CiS-2 BUTENE (C4H8)
C.P. 99.0%
TRANS-2-BUTENE (C4H8)
C.P. 99.0%
CARBON DIOXIDE (CO2)
RESEARCH 99.998%
INSTRUMENT (COLEMAN) 99.99%
BONE DRY 99.9%
CARBON MONOXIDE (C0)
RESEARCH 99.99%
C.P. 99.0%
TECHNICAL 98.0%
CHLORINE (CI2)
HIGH PURITY 99.5%
SINGLE
STAGE
CYLINDER REGULATOR
TWO
STAGE
CGA
INLET
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
HPS280
None
510
HPL280
GPS270
HPS500/270
HPS500/270
GPT270
HPT500/270
HPT500/270
590
590
590
GPL270
HPL500/270
HPL500/270
SGS500/550
SGT500
240/705
SGL500
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
580
580
580
580
580
580
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
None
None
None
SGL500
CRS100/200
None
330
SGL500
GPS281
GPS281
None
None
510
510
GPL270
GPL270
GPS281
GPS281
None
None
510
510
GPL270
GPL270
GPS281
None
510
NONE
N/A
GPS281
None
510
NONE
N/A
HPS500/270
HPS500/270
GPS270*
HPT500/270
HPT500/270
GPT270
320
320
320
HPL500/270
HPL500/270
GPL270
HPS500/272
HPS500/272
GPS272*
HPT500/272
HPT500/272
GPT272
350
350
350
NONE
NONE
NONE
N/A
N/A
N/A
660
SGL500
CRS100/200
*Oxygen greater than 23% use CGA 296, and less than 23% use CGA 590.
85
PURE GASES
PURE GASES
DEUTERIUM (D2)
C.P. 99.5%
DIMETHYL ETHER (C2H60)
PURITY 99.5%
ETHANE (C2H6)
RESEARCH 99.98%
C.P. 99.0%
TECHNICAL 97.5%
ETHYLENE (C2H4)
RESEARCH 99.98%
C.P. 99.5%
TECHNICAL 98.55%
ETHYLENE OXIDE (C2H40)
FLUORINE (F2)
HALOCARBON 12 (CCIF2)
PURITY 99.0%
HALOCARBON 13 (CCIF3)
PURITY 99.0%
HALOCARBON 13B1 (CBrF3)
PURITY 99.0%
HALOCARBON 14 (CF4)
PURITY 99.7%
HALOCARBON 22 (CHCIF2)
PURITY 99.9%
HALOCARBON 116 (C2F6)
PURITY 99.95%
HELIUM (He)
RESEARCH 99.9995%
ULTRA HIGH 99.999%
ZERO 99.995%
HIGH PURITY 99.995%
HEXAFLUOROPROPYLENE (C3F6)
PURITY 99.5%
HYDROGEN (H2)
RESEARCH 99.9999%
ULTRA HIGH 99.999%
ZERO 99.99%
PREPURIFIED 99.99%
EXTRA DRY 99.95%
HYDROGEN CHLORIDE (HCI)
TECHNICAL 99.0%
HYDROGEN SULFIDE (H2S)
C.P. 99.5%
ISOBUTANE (C2H10)
RESEARCH 99.96%
INSTRUMENT 99.5%
C.P. 99.0%
ISOBUTYLENE (C4H8)
RESEARCH 99.6%
C.P. 99.0%
SINGLE
STAGE
CYLINDER REGULATOR
TWO
STAGE
CGA
INLET
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
HPS500/272
HPT500/270
350
None
None
GPS281
None
510
None
None
HPS500/272
HPS500/272
GPS272
HPT500/272
HPT500/272
GPT272
350
350
350
None
None
None
None
None
None
HPS500/272
HPS500/272
GPS272
None
None
HPT500/272
HPT500/272
GPT272
None
None
350
350
350
510/350
679
None
None
None
None
None
None
None
None
None
None
None
None
660
None
None
None
None
660
None
None
None
None
660
None
None
GPS270
GPT270
580
GPL270
None
None
660
None
None
None
None
660
None
None
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
580
580
580
580
HPL500/270
HPL500/270
HPL500/270
HPL500/270
None
None
660
NONE
None
HPS500/272
HPS500/272
HPS500/272
HPS500/272
HPS500/272
HPT500/272
HPT500/272
HPT500/272
HPT500/272
HPT500/272
350
350
350
350
350
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
CRS100/200
None
330
SGL500
None
None
330
SGL500
HPS281
GPS281
GPS281
None
None
None
510
510
510
None
None
None
None
None
None
HPS281
GPS 281
NONE
NONE
510
510
NONE
NONE
None
None
86
PURE GASES
CYLINDER REGULATOR
TWO
STAGE
CGA
INLET
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
HPS500/270
HPT500/270
580
HPL500/270
HPS500/270
HPS500/270
HPS500/270
GPS272
GPS272
HPT500/270
HPT500/270
HPT500/270
GPT272
GPT272
350
350
350
350
350
None
None
None
None
None
None
None
None
None
None
GPS281
None
510
None
None
None
None
510
None
None
HPS500/270
HPS500/270
HPS500/270
HPT500/270
HPT500/270
HPT500/270
580
580
580
HPL500/270
HPL500/270
HPL500/270
SGS500/550
SGT500
660
SGL500
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
580
580
580
580
580
580
580
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPS500/270
GPS270
HPT500/270
GPT270
326
326
HPL500/270
GPL270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
540
540
540
540
HPL500/270
HPL500/270
HPL500/270
HPL500/270
None
None
660
None
None
HPS281
GPS281
GPS281
GPS281
NONE
NONE
NONE
NONE
510
510
510
510
None
None
None
None
None
None
None
None
HPS281
GPS281
None
None
510
510
None
None
None
None
87
KRYPTON (Kr)
RESEARCH 99.995%
METHANE (CH4)
RESEARCH 99.99%
U.H.P. 99.97%
C.P. 99.0%
TECHNICAL 98.0%
COMMERCIAL 93.00%
METHYLACETYLENE (C3H4)
PURITY 96.0%
METHYL CHLORIDE (CH3CI)
C.P. 99.5%
NEON (Ne)
RESEARCH 99.999%
U.H.P. 99.996%
PURIFIED 99.89%
NITRIC OXIDE (NO)
C.P. 99.0%
NITROGEN (N2)
RESEARCH 99.9995%
ULTRA HIGH 99.999%
PREPURIFIED 99.998%
ZERO 99.998%
HIGH PURITY 99.99%
OXYGEN FREE 99.99%
EXTRA DRY 99.7%
NITROUS OXIDE (N2O)
U.H.P. 99.99%
ATOMIC ABSORPTION 99.0%
OXYGEN (O2)
RESEARCH 99.995%
U.H.P. 99.99%
ZERO 99.6%
EXTRA DRY 99.6%
PERFLUOROPROPANE (C3F8)
PURITY 99.0%
PROPANE (C3H8)
RESEARCH 99.99%
INSTRUMENT 99.5%
C.P. 99.0%
NATURAL 96.0%
PROPYLENE (C3H6)
RESEARCH
C.P. 99.0%
SINGLE
STAGE
PURE GASES
SILANE (SiH4)
PURITY 99.9%
SULFUR DIOXIDE (SO2)
ANHYDROUS 99.98%
COMMERCIAL 99.9%
SULFUR HEXAFLUORIDE (SF6)
INSTRUMENT 99.99%
C.P. 99.8%
XENON (Xe)
RESEARCH 99.995%
MIXED GASES
AMMONIA
IN ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
IN OXYGEN*
BUTANE
IN ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
CARBON DIOXIDE
IN AIR
IN ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
IN OXYGEN (>23% O2)*
CARBON MONOXIDE (>23% O2 = 580)
IN AIR
IN ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
SINGLE
STAGE
CYLINDER REGULATOR
TWO
STAGE
CGA
INLET
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
None
SGT500
350
None
None
None
None
None
None
660
660
SGL500
SGL500
HPS500/270
GPS270
None
None
590
590
HPL500/270
GPL270
HPS500/270
HPT500/270
580
HPL500/270
SINGLE
STAGE
CYLINDER REGULATOR
TWO
STAGE
CGA
INLET
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
SGS500
SGS500
SGS500
SGS500
SGT500
SGT500
SGT500
SGT500
705 or 240
705 or 240
705 or 240
705 or 240
SGL500
SGL500
SGL500
SGL500
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
580
580
580
296/590
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPS500/272
HPS500/272
HPS500/272
HPS500/272
HPT500/272
HPT500/272
HPT500/272
HPT500/272
350
350
350
350
None
None
None
None
None
None
None
None
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
580
580
580
580
580
296
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
350
350
350
350
350
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
*Oxygen greater than 23% use CGA 296, and less than 23% use CGA 590.
88
MIXED GASES
CHLORINE
IN ARGON
IN NITROGEN
ETHANE
IN ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
ETHYLENE
IN ARGON
IN HELIUM
IN NITROGEN
HELIUM
IN ARGON
IN HYDROGEN
IN NITROGEN
IN OXYGEN (>23% O2)*
HEXANE
IN AIR
IN ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
HYDROGEN
IN ARGON
IN HELIUM
IN NITROGEN
HYDROGEN CHLORIDE
IN ARGON
IN HELIUM
IN NITROGEN
HYDROGEN SULFIDE
IN ARGON
IN HELIUM
IN NITROGEN
ISOBUTANE
IN ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
CYLINDER REGULATOR
TWO
STAGE
SGS500
CRS100/200
SGS500
CRS100/200
SGS500
CRS100/200
CGA
INLET
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
SGT500
330
SGL500
SGT500
330
SGL500
SGT500
330
SGL500
HPS500/272
HPS500/272
HPS500//272
HPS500/272
HPT500/272
HPT500/272
HPT500/272
HPT500/272
350
350
350
350
HPL500/272
HPL500/272
HPL500/272
HPL500/272
HPS500/272
HPS500/272
HPS500/272
HPT500/272
HPT500/272
HPT500/272
350
350
350
HPL500/272
HPL500/272
HPL500/272
HPS500/272
HPS500/272
HPS500/272
HPS500/272
HPT500/272
HPT500/272
HPT500/272
HPT500/272
580
350
580
296
HPL500/272
HPL500/272
HPL500/272
HPL500/272
HPS500/272
HPS500/272
HPS500/272
HPS500//272
HPS500//272
HPT500/272
HPT500/272
HPT500/272
HPT500/272
HPT500/272
350
350
350
350
350
HPL500/272
HPL500/272
HPL500/272
HPL500/272
HPL500/272
HPS500//272
HPS500/272
HPS500/272
HPT500/272
HPT500/272
HPT500/272
350
350
350
HPL500/272
HPL500/272
HPL500/272
None
330
SGL500
SGS500
CRS100/200
SGS500/
CRS100/200
SGS500
CRS100/200
None
330
SGL500
None
330
SGL500
SGS500
SGS500
SGS500
SGT500
SGT500
SGT500
330
330
330
SGL500
SGL500
SGL500
HPS500/272
HPS500/272
HPS500/272
HPS500/272
HPT500/272
HPT500/272
HPT500/272
HPT500/272
350
350
350
350
HPL500/272
HPL500/272
HPL500/272
HPL500/272
*Oxygen greater than 23% use CGA 296, and less than 23% use CGA 590.
89
IN HELIUM
SINGLE
STAGE
MIXED GASES
METHANE
IN AIR
IN ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
NITRIC OXIDE
IN ARGON
IN HELIUM
IN NITROGEN
NITROGEN
IN ARGON
IN HELIUM
IN HYDROGEN
IN OXYGEN (>23% O2)*
NITROGEN DIOXIDE
IN AIR
IN ARGON
IN HELIUM
IN NITROGEN
OXYGEN
IN ARGON
IN HELIUM
IN NITROGEN
PROPANE
IN AIR
IN ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
PROPYLENE
IN AIR
IN ARGON
IN HELIUM
IN HYDROGEN
IN NITROGEN
SULFUR DIOXIDE
IN AIR
IN ARGON
IN HELIUM
IN NITROGEN
SINGLE
STAGE
CYLINDER REGULATOR
TWO
STAGE
CGA
INLET
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPS500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
HPT500/270
350/590
350
350
350
350
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
SGS500
SGS500
SGS500
SGT500
SGT500
SGT500
660
660
660
SGL500
SGL500
SGL500
HPS500/270
HPS500/270
HPS500/272
HPS500/272
HPT500/270
HPT500/270
HPT500/272
HPT500/272
580
580
350
296
HPL500/270
HPL500/270
HPL500/270
HPL500/270
SGS500
SGS500
SGS500
SGS500
SGT500
SGT500
SGT500
SGT500
660
660
660
660
SGL500
SGL500
SGL500
SGL500
HPS500/270
HPS500/270
HPS500/270
HPT500/270
HPT500/270
HPT500/270
296/590*
296/590
296/590
HPL500/270
HPL500/270
HPL500/270
HPS500/270
HPS500/272
HPS500/272
HPS500/272
HPS500/272
HPT500/270
HPT500/272
HPT500/272
HPT500/272
HPT500/272
350/590
350
350
350
350
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPS500/270
HPS500/272
HPS500/272
HPS500/272
HPS500/272
HPT500/270
HPT500/272
HPT500/272
HPT500/272
HPT500/272
350/590
350
350
350
350
HPL500/270
HPL500/270
HPL500/270
HPL500/270
HPL500/270
SGS500
SGS500
SGS500
SGS500
SGT500
SGT500
SGT500
SGT500
660
660
660
660
SGL500
SGL500
SGL500
SGL500
*Oxygen greater than 23% use CGA 296, and less than 23% use CGA 590.
90
STERILIZING GASES
ETHYLENE OXIDE
IN CARBON DIOXIDE
CYLINDER REGULATOR
TWO
STAGE
HPS500/270
SINGLE
STAGE
HPT500/270
CGA
INLET
350
CYLINDER REGULATOR
TWO
STAGE
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
HPL500/270
CGA
INLET
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
CRS100/200
SGT500
330
None
None
HPS500/270
HPT500/270
580
HPL500/270
INSTRUMENT MIXTURES
CHROMATOGRAPH CARRIER GAS
8.5% HYDROGEN
91.5% HELIUM
FLAME IONIZATION FUEL MIXTURES
40% HYDROGEN
60% HELIUM
40% HYDROGEN
60% NITROGEN
FURNACE ATMOSPHERE MIXTURE
40% CARBON DIOXIDE
60% CARBON MONOXIDE
GEIGER GAS MIXTURE
.95% ISO BUTANE
99.05% HELIUM
SINGLE
STAGE
CYLINDER REGULATOR
TWO
STAGE
CGA
INLET
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
HPS500/272
HPT500/272
350
HPL500/272
HPS500/272
HPT500/272
350
HPL500/272
HPS500/272
HPT500/272
350
HPL500/272
HPS500/272
HPT500/272
350
HPL500/272
HPS500/272
HPT500/272
350
HPL500/272
91
LASER GASES
SINGLE
STAGE
INSTRUMENT MIXTURES
SINGLE
STAGE
CYLINDER REGULATOR
TWO
STAGE
HPS500/272
SINGLE
STAGE
HPT500/270
580
CYLINDER REGULATOR
TWO
STAGE
HPS500/272
SINGLE
STAGE
CGA
INLET
HPT500/272
HPL500/270
CGA
INLET
350
CYLINDER REGULATOR
TWO
STAGE
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
HPL500/270
CGA
INLET
LINE REGULATOR
SINGLE
PORT
STAGE
SIZE
HPS500/272
HPT500/272
350
HPL500/270
HPS500/272
HPT500/272
350
HPL500/270
HPS500/272
HPT500/272
350
HPL500/270
HPS500/272
HPT500/272
350
HPL500/270
HPS500/272
HPT500/270
580
HPL500/270
HPS500/272
HPT500/270
580
HPL500/270
HPS500/272
HPT500/272
350
HPL500/270
92
Notes
93
Notes
94
Notes
95
Notes
96
Limited Warranty
97