Professional Documents
Culture Documents
WWW.AUSTLIFT.COM.AU
CONTENTS:
TUCKAWAY SERIES ................................................... 4 TILT TAIL LIFT SERIES................................................ 7 CANTILEVER LIFT SERIES ........................................ 10 SLIDER SERIES ........................................................... 13 RAIL LIFTER HALF GATE ........................................................... 16 ............................................................... 18
Tailgates
AHT TUCKAWAY&CANTILEVER.................................. 23 ZEPRO TILT................................................................... 25 ZEPRO VAN LIFT ........................................................ 28 ZEPRO SLIDER ........................................................... 29 SIDE LIFT..................................................................... 30 MINIGATE ................................................................... 32 VAN STEP LIFT ......................................................... 36 VAN SWING LIFT ........................................................ 43
Cranes
DOCK SCISSOR LIFT ............................................ 47 AUSTLIFT DOCK LEVELLER ............................... 48 DOOR SEAL
.......................................................... 51 ........................................................ 51
Warehouse Solutions
PALLET JACK
BLUEGAINT DOCK LEVELLER............................ 53 CONTAINER RAMP............................................... 56 LIFTEZY ................................................................... 56 MEZZ LIFT ............................................................... 57 CELLAR LIFT .......................................................... 58 SCISSOR LIFT ........................................................ 59 GIRD LIFT ............................................................... 60
Waste Management
New Design
TUCKAWAY SERIES
Loading Capacity: 500KG TO 1000KG We have never stopped researching, developing and designing our Tuckaway range Tailgates. Todays AustLift Tuckaway has pulled out all the stops when it comes to performance. The main draw is the push cylinder sits in the centre of the device, combined with automatic levelling design and full working sized platform, it is far and away superior in performance and features to others in the market place.
Applications:
5
LOADING AREA
Opposition's Platform
GENERAL FEATURES
Harden & Tempered spring to assist folding and closing platform Locked control station plus hand control pendant to suits to your operation. Battery isolator switch with removable key for longer battery life. A pair of Wider supporting arm providing a better load stability.
Push Cylinder
Hydr
Oil
ELECTRICAL SPECIFICATIONS
All electrical components are sealed in a heavy duty plastic box. New Control eliminating troublesome electronic components. All contactors are silver coated for maximise electrical current transparent Available in 12V & 24 Volt.
PLATFORM MATERIAL
Steel, Aluminium, PVC
LOADING AREA
AUSTLIFT Platform
OPTIONS
Oil
To answer the question of how to reduce the Tailgate weight for achieving trucks Pull CylinderOpposition's Product payload, we have chosen a new material: PVC Form Board with coated anti slip paint. (patent pending) to make our platform. It can easily fold up with one hand, due to significant reduce the weight it feels incredibly light in the hand, but still maintains a reassuring robustness.
6
TUCKAWAY SPECIFICATIONS
Model
Tuckaway AL-TK500 AL-TK750 AL-TK1000
Loading Capacity
kg 500 750 1000
Platform W/L
mm 1600/1000 1800/1200 1800/1200
Load Centre
mm 500 500 500
Trolley Stops
Opt Opt Opt
INSTALLATION REQUIREMENTS
FIXED STATION
Model
AL-TK500 AL-TK750 AL-TK1000
A (Min)
1800 2100 2100
B
50 50 50
C
700 1400 1400
D (Min)
800 1000 1000
E (Max)
1100 1300 1300
HOW TO USE:
Applications:
Fitted 1T Tilt
Fitted 2T Tilt
GENERAL FEATURES
High-quality power pack Aluminium or Steel Steel platform or aluminium platform. Platform tilt adjustable at any position Low maintenance bushes fitted to all pivot points Level ride platform with Automatic tilt to ground at ground level Hose burst stoppers Trolley stoppers optional/standard Three button control pendant Lockable fix control station Battery Isolator switch Preset pressure compensating flow lowing control valve Wide frame lift mechanism improves load stability 5T Rollover capacity available on 3T and 2T steel platforms (Optional)
PLATFORM MATERIAL
ELECTRICAL SPECIFICATIONS
Waterproof control box with power switch Wander lead with spiral cable Control unit without electronic components Starter solenoid with silver contact Available in 12 or 24 Volt
AL-TT4000 comes with hydraulic out riggers
9
SPECIFICATIONS
Model
TILT AL-TT500 AL-TT750 AL-TT1000 AL-TT1500 AL-TT2000 AL-TT3000 AL-TT4000*
Loading Capacity
kg 500 750 1000 1500 2000 3000 4000
Platform W/L
mm 1800/1600 2000/1650 2470/2000 2000/1650 2470 (w) / 2300, 2400, 2500, 2600 2470 (w) / 2300, 2400, 2500, 2600 2470 (w) / 2300, 2400, 2500, 2600 2470(w)/ 2500,2600
Load Centre
mm 600 600 600 600 600 600 600
Trolley Stops
INSTALLATION REQUIREMENTS
Model
AL-TT500 AL-TT750 AL-TT1000 AL-TT2000 AL-TT3000 AL-TT4000
A/B
DEPENDING ON PLATFORM SIZE DEPENDING ON PLATFORM SIZE DEPENDING ON PLATFORM SIZE DEPENDING ON PLATFORM SIZE DEPENDING ON PLATFORM SIZE DEPENDING ON PLATFORM SIZE
C (Max)
100 100 100 100 125 125
D (Min)
NIL 800 800 900 900 900
E (Max)
1000 1000 1000 1900 1900 1900
F (Min)
800 1000 1000 1000 1150 1150
10
11
GENERAL FEATURES PLATFORM MATERIAL
Steel or Galvanised Mesh High-quality power pack Spring assisted platform opening Low maintenance bushes fitted to all pivot points All pins are galvanised Warning labels Mechanical travel lock Level ride platform with Automatic tilt to ground at ground level Hose burst protection Mesh or steel platform construction Battery Isolator switch Preset pressure compensating flow lowing control valve Wide frame lift mechanism improves load stability Self closing mechanism ALCL500T twin cylinders version available for truck need install tow bar.
ELECTRICAL SPECIFICATIONS
Waterproof control box with power switch Wander lead with spiral cable Control unit without electronic components Starter solenoid with silver contact Two button control pendant Lockable fix control station Available in 12 or 24 Volt
12
RHS 75x75
FIXED STATION
INSTALLATION REQUIREMENTS
Model
ALCL500 ALCL500T ALCL750 ALCL1000
A/B
DEPENDING ON PLATFORM SIZE DEPENDING ON PLATFORM SIZE DEPENDING ON PLATFORM SIZE DEPENDING ON PLATFORM SIZE
D (Max) mm
700 700 800 800
E (Min) mm
1000 1000 1000 1000
CANTilever SPECIFICATIONS
Model
Cantilever ALCL500 ALCL500T ALCL500H ALCL750 ALCL1000
Loading Capacity
kg 500 500 500 750 1000
Platform W/L
mm 1800/1200 1800/1200 900x1200 2000/1400 2000/1400
Load Centre
mm 500 500 500 500 500
Trolley Stops
Opt Opt Opt Opt Opt
13
SLIDER SERIES
Loading Capacity: 1500KG TO 3000KG Austlift Slider Tailgates are designed and manufactured for Australian conditions. They offer customers the ultimate in lifting capacity.
14
GENERAL FEATURES ELECTRICAL SPECIFICATIONS
External controls in sealed metal box Battery switch with removable key 2-handed operation for all functions from the external controls Control unit without electronic components Three button control pendant with special cable Lockable fix control station Battery Isolator switch Available in 12 or 24 Volt
Aluminium Platform 2 single acting lift cylinders Sliding tubes in hard chromed steel with mounting plates adjusted to the chassis (truck or trailer) Platform tilt adjustable at any position Low maintenance bush fitted to all pivot points Rollers to protect the platform on the ground Wander lead with spiral cable Level ride platform with Automatic tilt to ground at ground level Hose burst protection Trolley stoppers (optional) Self lubricating bushes Preset pressure compensating flow lowing control valve Wide frame lift mechanism improves load stability
PLATFORM MATERIAL
Aluminium
HYDRAULIC SPECIFICATIONS
Powder-coated power pack casing Steel oil tank with filter Oil pressure controlled by pressure relief valve
15
SLider SPECIFICATIONS
Model
Slider ALSL1500 ALSL2000 ALSL3000 ALSLTILT SLIDER 3000
Loading Capacity
kg 1500 2000 3000 3000
Platform W/L
mm 2300/1610* 2300/1610* 2450/1800* 2450/2000*
Load Centre
mm 600 600 750 750
Trolley Stops
ST ST ST ST
INSTALLATION REQUIREMENTS
Model
ALSL1500 ALSL2000 ALSL3000
A
NO LOWER THAN CHASSIS NO LOWER THAN CHASSIS NO LOWER THAN CHASSIS
B (Min)
300 300 300
C (Max)
100 100 100
D (Max)
1000 1000 1000
E (Min)
1600 1670 1600
F (Min)
2000* 2000* 2000*
G (Min)
960 960 960
16
17
FEATURES
Level ride platform with tilting cylinders Hose burst protection Three button control pendant Lockable fix control station Battery Isolator switch Preset pressure compensating flow lowering control valve Chromed cylinder piston rods Powder-coated power pack casing Steel oil tank with site glass Oil pressure controlled by pressure relief valve Cylinders equipped with synthetic gaiters and lubrication
ELECTRICAL SPECIFICATIONS
Available in 12 or 24 Volt External controls in sealed metal box Battery isolating switch with removable key 2-handed operation for all functions from the external controls Control unit without electronic components Starter with silver contact (200AMP)
PLATFORM MATERIAL
Steel, Mesh or Aluminium
OPTIONAL
Trolley stoppers
SPECIFICATIONS
Model
ALRL500 ALRL1000 ALRL2000
Lifting Capacity
500kg 1000kg 2000kg
Platform Size W x L mm
Optional 2470 x 2000 Optional
Weight (kg)
990* 1200* *
Voltage
12/24v 12/24v 12/24v
* Weights are a guide only, will vary due to different vehicle widths and operating heights.
Units are custom made to customer specifications.
18
HALF Gate
19
HALF Gate
AUSTLIFT Half gate with hand rail and trolley stoppers.
20
Quality platform A: Sandblasted steel platform with Two pack ( Polyurethane) paint B: Anodised aluminium platform
21
Permaglid Bush
Simplified design on Power Pack and Control Box to avoid potential problems.
INDUSTRIAL CLEANING
COUNCIL
BUILDING CONSTRUCTION
TUCKAWAY CANTILEVER TILT TYPE SLIDER RAIL LIFT SIDE LIFT MINIGATE FOR LIGHT TRUCK GRID LIFT VAN LIFT VAN STEP LIFT VAN SIDE LIFT VAN TROLLEY LIFT VAN SWING LIFT REAR SWING LIFT MINIGATE FOR UTE SWING LIFT
22
6 Montgomery Way6 Montgom Malaga WA 6090 Malaga W Tel: 08 9248 6674 Tel: 08 92 Material Handling Services Pty www.olearys www.olearys.com.au 6 Montgomery Malaga WA AHT are the aluminium whentailgate it comes to truck tailgate hoists. They are the only tailgate manufact 08 9248 AHT are the aluminium specialists when it specialists comes to truck hoists. They are the only tailgate manufacturer inTel: the world to offer a full aluminium tailgate hoist, not just an aluminium platform. www.olearys.co the world to offer a full aluminium tailgate hoist, not just an aluminium platform.
The ATK model requires a small bridging to beto set into or added The ATK model requires a small bridging plate to be set intoplate or added the truck tray. to the truck tray. AHT are the aluminium specialists when it comes to truck tailgate hoists. They are the only tailgate manufacture the world to offer a full aluminium tailgate hoist, not just an aluminium platform.
ATK 1000 ATK 1000 1tonne Capacity The ATK model requires a small bridging plate to be set into or added to the truck tray. 1tonne Capacity ATK 1000 1tonne Capacity
24
Material Handling Services Pty L Material Handling Services Pty Ltd 6 Montgomery W
6 Montgomery Way WA 60 Malaga Malaga WA 6090 Tel: 08 9248 66 Tel: 08 www.olearys.com. 9248 6674 www.olearys.com.au
This superior and cost effective lift is designed for small Pick-Up trucks. It is extremely light in weight This superior and cost effective lift is designed for small Pick-Up It is in weight (120kg) and will be installed directly onto the bed level. trucks. No need to extremely change thelight lights, license plates or (120kg) and will be installed directly onto the bed level. No need to change the lights, license plates or underrun beam. The tow bar is not affected by the installation. underrun beam. The tow bar is not affected by the installation. - The complete lifting mechanism and the platform are made from - The complete mechanism and the platform are made from high lifting strength aluminium. high strength aluminium. - So the Pick-Up lift is extremely light in weight: 120kg - So the Pick-Up lift is extremely light in weight: 120kg - Platform size: 1430x1137mm (WxD) - Platform size: 1430x1137mm (WxD) - The load capacity is 300kg-400kg with load centre point of - The load capacity 500mm. is 300kg-400kg with load centre point of 500mm.
- Easy & quick installation - Easy & quick installation - Long life - low maintenance - Long life - low maintenance
- Very small and compact - Very small and compact - Installed into the main tube, keeping it completely safe from the - Installed into the main tube, keeping it completely safe from the weather. weather. - Power consumption is very low - Power consumption is very low - Sound proof - Sound proof - Two battery cables (Plus and Minus) - Two battery cables (Plus and Minus)
25
Material Handling Services Pty Ltd
A light weight lift with lifting capacity of 1000kg. Load + centre 600mm. Fitted with 3 piece aluminium bumper bar and standard with aluminium platform. This is an ideal hoist for a wide range of uses for skids, trolleys and light pallet loads with manual pallet jacks for small to medium trucks. The hydraulic power pack is separately mounted to reduce lifting beam and reduce required overhang . Zepro tailgates are compliant with the European Standards EN-1756-1 2001 which are specific for truck tailgates unlike Australian Standard AS1418.8. Zepro is also the only European tailgate manufacturer to be certified to ISO 9001 and ISO 14001.
Optional Wireless Remote Control available on all Zepro models.
Technical Specifications
Width of chassis Arm length Cylinders Max load distance Min battery capacity C max C min E max Platform lengths (Max) Aluminium Weights Frame Aluminium Platform x 2490mm wide
RZU 100 -132 715 to 860mm 750mm 2 x (Single acting one-speed tilt adjustable tilt angle) 2 x (Single acting one- speed lift) 600mm 170Ah 620mm 370mm 1320mm 1800mm 197kgs 129kgs
26
The ideal lightweight tailgate hoist for small to medium trucks with all the features you will need. Ideally suited for small crates,skids, fridges etc. This model is not recommended for use with standard pallets and pallet trolleys. Zepro tailgates are compliant with the European Standards EN-1756-1 2001 which are specific for truck tailgates unlike Australian Standard AS1418.8. Zepro is the only European tailgate manufacturer to be certified to ISO 9001 and ISO 14001.
The ZLU75 features single acting lift and tilt cylinders. The push rods are protected against corrosion with zinc iron treatment and the piston rods are coated Corr-i-Dur . Threaded cylinder tops seal effectively against water and dirt ingress. Optional Wireless Remote control available on all Zepro models.
Technical Specifications
Maximum Lifting Capacity Lift type Load centre Maximum platform length Tilt Cylinders Lift Cylinders Auto tilt ZLU-75-90 Overhang required Weight Height of Truck ZLU-75-110 Overhang required Weight Height of Truck
750kg Standard light duty 600mm Aluminium platform 1600mm x 2200x 30mm thick 2 2 Hydraulic auto tilting function 384-554mm Lift 141kg, Platform 58-72kg 900mm 432-675mm Lift 146.5kg, Platform 58-72kg 1100mm
27
ZHD 2500-150
Maximum lifting capacity: Maximum lifting height: Operation voltage: Lift cylinders: Tilt cylinders: solid cylinders with stainless steel piston rods Load centre of gravity: Platform, reinforced: Weight: 2500 kg 1500 mm 24V 2 2
1000 mm Steel Lift chassis 422 kgs steel platform 2000 mm 365 kgs Bellows
Option:
28
Material Handling Services Pty Ltd
6 Montgomery Way Malaga WA 6090 Tel: 08 9248 6674 www.olearys.com.au
Technical Specifications
Maximum lifting capacity Loading capacity Overhang required Lift type Load centre Maximum platform length Tilt Cylinders Lift Cylinders Weight Maximum Height of Van Floor.
500kg 500kg 642-735mm Standard for vans-light duty 600mm Aluminium platform 1600mm, 30 flat 1 2 Lift 96kg, Platform 47-59kg 500mm
29
Material Handling Services Pty Ltd
6 Montgomery Way Malaga WA 6090 Tel: 08 9248 6674 www.olearys.com.au
This modern slider model range includes the use of aluminium profiles for oil transport reducing the hose lengths. High tensile steel and powder coating are offered as standard for all steel components. A hydraulic motor drives the slide system and gives the smoothest most reliable extend / retract movement in the industry. The ZSS model range is optimized for high C measure and maximizing ground clearance. This is the heaviest duty slider in the ZEPRO range. Zepro tailgates are compliant with the European Standards EN-1756-1 2001 which are specific for truck tailgates unlike Australian Standard AS1418.8. Zepro is also the only European tailgate manufacturer to be certified to ISO 9001
The hydraulic unit is placed in front of the support frame to minimize the vertical height of the tail lift. Aluminium profiles are used for hydraulic fluid transport which reduces hydraulic hose use. Optional Wireless Remote control available on all Zepro models. The ZSS250 features double acting tilt cylinders and single acting lift cylinders. The push rods are protected against corrosion with zinc iron treatment and the piston rods are coated Corr-i-Dur . Threaded cylinder tops seal effectively against water and dirt ingress.
Technical Specifications
Maximum lifting capacity Lift type Load centre Maximum platform length Tilt Cylinders Lift Cylinders Auto tilt ZSS-250-135 Overhang required Weight Height of Truck ZSS-250-155 Overhang required Weight Height of Truck 2500kg Slider 750mm 1976mm 2 Double acting one speed adjustable tilt. 2 single acting one speed Hydraulic auto tilting function 1771-1971mm Lift 403kg 1350mm 1891-2091mm Lift 412kg 1550mm
30
SIDE LIFT
model:
AL-SL250 Designed for 3.5 to 17 tonne vehicles, Side Lift enables deliveries to be made directly onto the kerb side, dramatically reducing the space required to park and enabling more even distribution of the load, thereby reducing route planning time and risks of axle overload.
31
Features
Hydraulically powered for a smooth controlled operation Easy installation, no welding required 12v or 24v versions available Minimal reduction in vehicle payload Handles loads up to 250kg Remote and static controls In cab isolator and warning buzzer Hydraulic overload protection
Options
Radio remote control Off-set platforms Battery protection
Applications
Highways Construction Council Local authorities Tyre industry
32
FEATURES
Excellent off-road ground clearance Specifically designed to suit pickup and dropside vehicles No under-slung columns, ropes or chains Cantilever action means standard tow bars can be fitted Low self-weight maximises payload Standard 500kg MWL A wide range of platform materials are available including steel, mesh and aluminium A wide range of platform sizes tailored to suit your requirements, including folding platforms
33
Options
Radio remote control Bespoke platform sizes Folding or drop-in guard frames Manual back-up hand pump Battery protection
Applications
Highways Construction Council Railways Tyre industry
PLATFORM MATERIAL
Aluminium, Steel or Mesh 750mm steel platform 145kg 800mm galvanised steel mesh platform 138kg 600mm aluminium platform + 200mm toe 135kg
34
Features
Low self weight maximises payload Standard 500kg MWL Specifically designed to suit pickup and dropside vehicles No under-slung columns, ropes or chains Cantilever action means standard tow bars can be fitted A wide range of platform materials are available including steel, mesh and aluminium A wide range of platform sizes tailored to suit your requirements, including folding platforms
35
PLATFORM MATERIAL
Aluminium, Steel or Mesh 750mm steel platform 150kg 800mm galvanised steel mesh platform + 200mm toe 140kg 600mm aluminium platform + 200mm toe (illustrated) 138kg 800mm aluminium platform + 200mm toe 143kg 800mm aluminium platform (including 200mm fold) + 200mm toe 145kg 1000mm aluminium platform (including 200mm fold) + 200mm toe 153kg
Options
Radio remote control Bespoke platform sizes Upgrade up to 550kg MWL Folding or drop-in guard frames Manual back-up hand pump Battery protection
Applications
Highways Construction Council Tyre industry
36
Features
External mounting allows unhindered access and means that internal load space can be utilised to its maximum Hydraulically powered for a smooth controlled operation Easy installation, no welding required 12v or 24v versions available Loading capacity 250kg Minimal reduction in vehicle payload Remote and static controls In-cab isolator and warning buzzer Hydraulic overload protection Anti-roll-off toes and bridging flaps on multifold platforms where applicable
Options
Customized platform sizes Radio remote control Towing bracket MWL upgrade Side rails Reversing sensors Battery protection
37
Applications
Highways Construction Council Fire & rescue Healthcare Plumbers & Builders merchants
Platform range
825mm x 315mm step only 80kg 825mm x 615mm single fold 95kg 1200mm multifold (as illustrated) 105kg A unique lifting platform that replaces the rear step for loading most types of van.
1205
1200
200
38
MICRO CRANES
Made in Italy
NEW
MICRO CRANES
AL130
Max. Lifting Moment: 12 kNm(1.2 mt) Max. Lifting Capacity: 1130 kg Max. Hydraulic Outreach: 2.7 m Max. Outreach: 3.5 m Slewing Angle: 340 Slewing Torque: 3.2 kNm (0.33 mt) Operating Pressure: 19 Mpa (190 bar) Recommended Pump Capacity: 6 L / min
Hydr. Boom Extensions Max. Outreach First Manual Extension Crane Weight First Manual Extension 2 2.7 m 3.5m 165 Kg 177 Kg 3 3.5m 187 Kg -
39
AL130* NO CE
AL130* CE
40
MICRO CRANES
Max. Lifting Moment: Max. Lifting Capacity: Max. Hydraulic Outreach: Max. Outreach: Slewing Angle: Slewing Torque: Operating Pressure: Recommended Pump Capacity:
Hydr. Boom Extensions Max. Outreach First Manual Extension Second Manual Extension Crane Weight First Manual Extension Second Manual Extension 2 3.1m 4.1m 5.1m
AL230
22.8 kNm (2.3 mt) 1820kg 4.1 m 5.6 m 340 3.2 kNm (0.33 mt) 19 Mpa (190 bar) 6 L/min
3 4.1m 5.1m 259 Kg 271Kg
AL230* CE
AL230* NO CE
MICRO CRANES
Max. Lifting Moment: 31 kNm (3.2mt) Max. Lifting Capacity: 2050 kg Max. Hydraulic Outreach: 4.7 m Max. Outreach: 6.7 m Slewing Angle: 340 Slewing Torque: 3.2 kNm (0.33 mt) Operating Pressure: 18 Mpa (190 bar) Recommended Pump Capacity: 8 L / min
Hydr. Boom Extensions Max. Outreach First Manual Extension Second Manual Extension Third Manual Extension Crane Weight First Manual Extension Second Manual Extension Third Manual Extension 2 3.68m 4.68m 5.6m 6.68m 315 Kg 355 Kg 350Kg 360Kg 3 4.68m 5.6m 6.68m 345 Kg 360Kg 370Kg
AL330
41
V3
V2
AL330-2 NO CE
AL330-3 NO CE
2050kg 1130kg 820kg 500kg 380kg 630kg 20.1KN 11.1KN 8KN 6.2KN 4.9KN 3.7KN
2020kg 1130kg 19.8KN 11.1KN 800kg 620kg 500kg 380kg 7.9KN 6.1KN 4.9KN 3.7KN
Einstufung: H1/B3 nach DIN15018 classification: H1/B3 in DIN15018 classement: H1/B3 en mesure DIN15018
Konstruktionsnderungen vorbehalten, fertigungstechn. Toleranzen mssen bercksichtigt werden. Subject to change, production tolerances have to be taken into account. Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Einstufung: H1/B3 nach DIN15018 Subject to change, production tolerances have to be taken into account. classification: H1/B3 in DIN15018 Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration. classement: H1/B3 en mesure DIN15018
42
Crane Outriggers
DIMENSIONS
A mm 1800 B mm 2800 b h C D E F mm mm mm mm mm mm 80 120 425 330 70 35 STD mm 540
PSF-PSP
OPTIONAL
CE
43
Options
Customized boom length to suit application 12v or 24v Radio remote control Corner bracket for mounting direct to a pick-up vehicle headboard Cranked hinge available allowing even greater flexibility Additional pillar height Extra rope length (9m/30 up to 250kg) Battery protection Lifting accessory kit
43
Applications
Highways Construction Council Fire & rescue
44
Features
Lifts 500kg in all configurations of boom position Remote control Easily demountable Low crane weight from 44kg (pillar is extra) Above or below floor socket mounting for pickups Overload protection Compact design folds away when not in use Manual boom extension with three height settings Easily installed at our own premises, on site or by a vehicle body builder
Options
12v or 24v operation from vehicle battery Fitting kit Extra rope length up to 12m/40 Manual stabiliser leg Radio remote control Additional pillar height Battery protection Lifting accessory kit
Applications
Construction Council & waste management Fire & rescue
45
46
Pacific Lifting is the Australian distributors for PM Crane a LEADING ITALIAN BRAND Truck mounted knuckleboom crane offering supply only /or supply and fit from the various branches throughout Australia. Models available from 1.0T/M to 60T/M
47
48
DOck leveller
FEATURES:
Easy Maintenance
16mm one piece Lip Plate & 8mm Check Plate Platform
16mm LIP Grade GR-250 material with Laminated Backing Plate 150mm x 10mm Displacement cylinders used in both lift and lip with large rods made in our cylinder factory using SKF brand seals from Germany standard sizes off the shelf 25mm Hard chrome pins used material K1045 Perma glide bushes in all cylinder pivot points, standard bushes off the shelf items CBC Bearings Australia wide Brevini powerpack from Italy, parts available Australia wide, Standard motor start contactors and standard push button control all parts Australia wide.
49
Developed over 15 years, AUSTLIFT Dock Leveller has been innovative in design. AUSTLIFT Dock leveller is a proven design and a cost effective Dock Leveller. The Cylinder has to be tested 50,000 cycles before use. Sand blasted and two pack paint make it suitable for any wet working condition.
50
Specifications:
DOOR SEAL
We have carefully chosen a high density poly sponge as the core material and the covers are made from UV proof, heavy duty tarpaulins. The seal has past fatigue test to Australian Standards, It can withstand more than 50,000 squashes at less than 5% distortion of its size. It is one of the best in market.
51
Accessories
Traffic Light Truck Restraint
Pallet Jack
Features: model:
Model
Capacity Lowered fork height Steering wheel Fork wheel single Fork wheel tandem Max. lift height Total height Overall length Fork length Width overall forks Ground clearance, centre of wheelbase Aisle width for pallets 1000x1200 crossways
Pallet truck with brake system can conveniently cease the truck an navigate ramps. PL-BSB (With Hand Brake) Specifications:
PL-BSB
2500KG 85/75mm 200/180mm 80x93/74x93 80x70/74x70 200/190mm 1224mm 1533/1603mm 1150/1220mm 550/685mm 40/30
52
Option:
(1) Nylon wheel, polythene wheel,rubber wheel,single fork roller or tan dem fork rollers. (2) Fork length:800mm,900mm,1000mm (3) Foot pedal release.
100
Wa
h14
m2
53
h3
100 Ast
h13
l1
( MM )
1KG=2.205LB 1INcH=25.40MM
Model
capacity Lowered fork height Steering wheel Fork wheel single Fork wheel tandem Max. lift height Total height overall length Fork length Width overall forks Ground clearance, centre of wheelbase Aisle width for pallets 1000x1200 crossways Aisle width for pallets 800x1200 lengthways Turning radius Service weight Q(kg) h13(mm) mm mm mm h3(mm) h14(mm) l 1(mm) l(mm) b5(mm) m 2(mm) A st(mm) A st(mm) W a(mm) kg 2500/3000 85 200 80x93 80x70 200 1224 1483/1533/1603 1100/1150/1220 520/550/685 32 1733/1733/1803 1883/1783/1803 1216/1266/1336 65-80
BF
2500/3000 75 180 74x93 74x70 190 1214 1483/1533/1603 1100/1150/1220 520/550/685 22 1733/1733/1803 1783/1783/1803 1216/1266/1336 65-80
b5
160
53
W O R L D W O R L D C L A S S , C L A S S , W O R L D W O R L D W I D E . W I D E .
Dock Levelers Vehicle Restraints Dock Levelers Lifts Vehicle Dock Restraints Seals and Shelters Dock Lifts Accessories Seals and Shelters Accessories
54
Inflates around the trailer providing an effective seal for a variety of trailer sizes
The Series IS401As in atable, air-tight seal is the solution for any door opening required for a wide variety of trailer widths and heights up to 3048 W x 3454 H. RipStop fabric provides greater resistance to wear and tear normally found on standard truck shelters. It also blocks foul weather, insects, dust, and dirt, thus giving you years of trouble free service while saving you money on energy costs. In atable truck shelters also help productivity by increasing safety, protecting personnel, products, and equipment.
Series IS401A standard dimensions for door openings up to 3302 W x 3353 H are 3606 W x 3708H (O.D.) with a 610 projection, 1220 header air bag drop, and two (2) vertical air bags (one per side) with 610 inward projection when in ated. Seals trailers 3200 to 4115 high from grade with a dock height of 1220. Also seals trailers with widths from 2286 W. 16 oz. RipStop fabric developed speci cally for in atable units gives years of trouble free service. Can be part of a totally automated dock loading system. Gives full access to trailer opening. 457-508 projection in front of the dock bumper face is recommended to provide a proper seal. Side frame made of Hot Dipped galvanized tubular framing.
OPTIONS
Wider Units
Extended projections
Higher units
09/31/08-0
BLUE GIANT .
BLUE GIANT .
55
Material Handling Services Pty Ltd6 Montgomery Way
6 Montgomery Way Malaga WA 6090 Malaga WA 6090 Tel: 08 9248 6674 Tel: 08 9248 6674 www.olearys.com.au www.olearys.com.au
Blue Giant is one of the largest dock equipment manufacturers in the world and Olearys are proud to be the authorised dealer of their products for Australia and New Zealand. the authorised dealer of their products for Australia and New Zealand.
FEATURES SAFETY FEATURESSAFETY A hydraulic velocity fuse
A hydraulic velocity fuse That limits the loaded Ramps free fall to within 76mm. Full operating range metal toe guards painted safety yellow as specified by ANSI Z535.1 Stationary side toe guards with high visibilty OSHA safety striping. A maintenance strut that supports the deck and lip and facilitates under deck maintenance and inspection.
Blue Giant is one of the largest dock equipment manufacturers in the world and Olearys are proud to be
That limits the loaded Ramps free fall to within 76mm. Full operating range metal toe guards painted safety yellow as specified by ANSI Z535.1 Stationary side toe guards with high visibilty OSHA safety striping. A maintenance strut that supports the deck and lip and facilitates under deck maintenance and inspection.
Upside down lifting cylinder for self bleeding, and clear hydraulic tank Upside down lifting cylinder for self bleeding, and clear hydraulic tank for ease of maintenance.
New HU Series with Deck Flex Advantage. The deck is a single sheet of hi-strength floor-plate and is supported by a minimum of 6 high tensile solid steel beam members. This allows the deck to flex up to 100mm maintain contact with the truck tray while loading and keeps NewU HU Series with Deck Flex Advantage. The deck is a to single sheet of hi-strength floor-plate and is supported by a minimum of 6 high the rear hinge flush with the floor U at beam all times for smooth crossover. tensile solid steel members. This allows the deck to flex up to 100mm to maintain contact with the truck tray while loading and keeps Available in standard widths 1829mm 1981mm & 2108mm and lengths 1918mm, 2527mm & 3137. Other sizes available on request. the rear hinge flush with the floor at all times for smooth crossover.
Intelligent dock control is now available at the touch of a finger.
Available in standard widths 1829mm 1981mm & 2108mm and lengths 1918mm, 2527mm & 3137. Other sizes available on request.
Intelligent dock control is now available at the touch of a TM finger. Optional Gold Series Control Panels The Blue Genius Gold Series I Dock Control Panel with advanced microprocessor technology improves both productivity TM Thevia Blue Genius Gold Series I Dock Control Panel with and dock safety a clear onboard communication system, advanced technology improves fast-acting touch buttons, microprocessor and a supervisory keypad lockout and both productivity override function. and dock safety via a clear onboard communication system, TM The Blue Genius detectstouch finger buttons, proximityand through the insulated fast-acting a supervisory keypad lockout and panels surface withoutfunction. direct electrical contact with electrode override TM metal, removing the problems associated wear, corrosion The Blue Genius detects with finger proximity through the insulated and contamination. Maintenance issues surrounding mechanical panels surface without direct electrical contact with electrode buttons, such as breakage, are eliminated completely. metal, removing the problems associated with wear, corrosion The Blue GeniusTM software offers intelligent programmable and contamination. Maintenance issues surrounding mechanical menu options and is easy to upgrade. such as breakage, are eliminated completely. Blue Genius TM Gold Series I Blue Genius TM Gold Series II Blue Genius TM Gold Series III Also available buttons, is an advanced TM The Blue ,Genius software offers intelligent programmable communication package which menu options and is easy to upgrade. includes LED interior and exterior TM TM TM Blue Genius Gold Series I Blue Genius Gold Series II Blue Genius Gold Series III Also available is an advanced traffic lights, and driver warning communication package, which signs.
includes LED interior and exterior traffic lights, and driver warning signs.
A full range of models available, Mini Dock, Vertical Type, Hydraulic and Mechanical.
Passive mechanical stop to prevent drive off.
A full range of models available, Mini Dock, Vertical Type, Hydraulic and Mechanical.
56
Mobile Container Ramp, Load capacities: 10,000kg-22,000kg The Container Ramp is made from pre-forged grid as its surface material, it is easy to clean and reduces overall weight. The ramps height can be manually operated if there is no power supplied on site. Fork point is fitted on the left corner for easy movement on the job site. Weight: 3.6t 2m x 11.5, 1.2m/.1.7m
Liftezy
models: ALWLG-20 LiftEzy is a portable material lift for construction and industrial applications. Lightweight modern design for easy movement. Safe, strong and reliable. Fit thought a standard door, easy set up. Folding stabilizers for compact storage Aluminium telescopic mast system Work height form 3.5m to 7.9m. Other size available upon request.
Specifications
ALWLG-20 Storage height Storage Length Work Length Work Width Smallest Load Height Capacity 2000mm 740mm 2080mm 800mm 150mm 363KG Weight Work Height (Fork Upwards) Work Height (Fork downwards) Straight arm ALWLG-20 184Kg 5940mm 6460mm 6250mm
57
Options Free-standing fabricated shaft Inter-locking gate system Railings or guard panels to suit location Loading ramp Bespoke platform Dual push button control stations 3-phase motor
Features Rugged, reliable & proven construction Hydraulic overload protection Hold to run controls No lift pit required Can operate outside Compact design Standard 240 volt 20 amp power requirement
MEZZ LIFT
Factories, Warehouses and Stores often neglect the most important aspect of their business How to move goods quickly and safely from the ground floor to mezzanine level. Austlift Mezz Lift provides a robust, reliable and cost effective solution, dramatically reducing the risk of injury to staff and increasing the efficiency of operation. Its small footprint and no requirement for a lift pit make it ideal for even the most restricted of sites. Built in Britain, built for you, built to last. Safety at work Employers must make an assessment of risk relating to the manual handling of loads at work. If the risk cannot be eliminated then it must be reduced to an acceptable level. The Mezz Lift is in use with many factory, warehouse and store operators, helping them to meet their statutory responsibilities. They also benefit from productivity increases and reductions in property and product damage. Mezz Lifts are designed and built within a total quality system, ISO 9000/2000, and are CE marked to demonstrate compliance with the latest legislation.
58
CELLAR LIFT
NEW!
Pub and restaurant refurbishments all too frequently neglect the powerhouses of the whole business, the cellar and the kitchen. The Cellar Lift provides a robust, reliable and cost effective solution to the problems associated with deliveries. It can also be of great benefit when used as a case hoist for restocking the bar. Built in Britain, built for you, built to last.
59
59
60
Grid Lift
model: AL-GL300 The new GridLifts are designed for installation on highway maintenance vehicles such as gully tankers and jetters, for lifting heavy covers out of the way and to provide clear access for safe, efficient cleaning and maintenance. Crews can clear more gullies in the same period with greater safety, each operation taking only around two minutes.
61
Features
300kg lifting capacity Replaces alternative cover handling equipment such as electric Hydraulic rams extend and retract the lifter to raise and lower the gully lid Smooth, precise and accurate movements for the best possible combination of performance and safety Designed to pivot so that the cover can be moved aside for easy access and cleaning of the gully Separate frame locks into place on the end of the vertical arm and attaches securely to the gully cover by simple twist clips that can accommodate castings with different profiles Remote control key pad allows maintenance crews to stand safely away from any moving parts during lifting and lowering Two independent locking pins secure the device safely in the retracted position when the vehicle is moving to comply with vehicle safety regulations
Applications
Council & waste management Highway maintenance work Local authorities
62
Waste Management
The ideal press for the large stores with high volumes of cardboard.
Product type description: Pressing power: Specific pressing power: Press chamber depth: Loading height: Loading aperture width: Loading aperture height: Press chamber width: Bale length: Bale width: Bale height: Bale weight (max.): Number of strappings: Strapping material: Cycle time in idle operation: Hourly bale output: Type of door: Door lock: Driving power: Depth: Width: Height: Weight: HSM V-Press 1160 plus 532 kN 40.3 N/cm 1100 mm 1115 mm 1195 mm 650 mm 1195 mm 1200,00 mm 1100 mm 1200 mm 550 kg 4 Wire 46 s 1-2 Sliding door Handwheel 7.5 kW 1568 mm 1737 mm 2990 mm 2403 kg
63
Waste Management
The ideal press for the smaller store with limited access or space.
Product type description Pressing power Press chamber depth Loading height Loading aperture width Loading aperture height Press chamber width Bale length Bale width Bale height Bale weight (max.) Number of strappings Strapping material Cycle time in idle operation Hourly bale output Type of door Door lock Driving power Voltage Voltage Frequency Depth Width Height Weight
HSM V-Press 610 120kN 600mm 655mm 800mm 495mm 800mm 800mm 600mm 600mm 100kg 3 Polyester tape 22 s 3-6 Double door Handwheel 3 kW 400v 50 Hz 815mm 1190mm 1980mm 488kg
Tel. +49 (0) 75 54 / 2100-0 Fax +49 (0) 75 54 / 2100-160 info@hsm.eu www.v-press.com
64
Waste Management
The ideal press for the medium size stores with restricted height access.
Product type description: Pressing power: Specific pressing power: Press chamber depth: Loading height: Loading aperture width: Loading aperture height: Press chamber width: Bale length: Bale width: Bale height: Bale weight (max.): Number of strappings: Strapping material: Cycle time in idle operation: Hourly bale output: Type of door: Door lock: Driving power: Depth: Width: Height: Weight: V-Press 818 Eco 185 kN 19.23 N/cm 780 mm 871 mm 1195 mm 541 mm 1200 mm 1200 mm 780 mm 700 mm 200 kg 4 Polyester tape 35 s 2-5 Double Door Handwheel 3 kW 997 mm 1700 mm 2370 mm 994 kg
Tel. +49 (0) 75 54 / 2100-0 Fax +49 (0) 75 54 / 2100-160 info@hsm.eu www.v-press.com
65
Waste Management
The ideal press for the medium size stores with restricted height access.
Product type description: Pressing power: Specific pressing power: Press chamber depth: Loading height: Loading aperture width: Loading aperture height: Press chamber width: Bale length: Bale width: Bale height: Bale weight (max.): Number of strappings: Strapping material: Cycle time in idle operation: Hourly bale output: Type of door: Door lock: Driving power: Depth: Width: Height: Weight: V-Press 818 Plus 185 kN 19.23 N/cm 780 mm 871 mm 1195 mm 530 mm 1200 mm 1200 mm 780 mm 700 mm 200 kg 4 Polyester tape 35 s 2-5 Loading flap Handwheel 3 kW 997 mm 1700 mm 2370 mm 956 kg
Tel. +49 (0) 75 54 / 2100-0 Fax +49 (0) 75 54 / 2100-160 info@hsm.eu www.v-press.com
66
Waste Management
Material Handling Services Pty Ltd Material Handling Services Pty Ltd 6 Montgomery Way
6 Montgomery Way Malaga WA 6090 Tel: 08 9248 6674 6 Montgomery Way Tel: 08 9248 6674 www.olearys.com.au Malaga WA 6090 www.olearys.com.au Tel: 08 9248 6674
www.olearys.com.au
The ideal press for the medium with restricted height access. The ideal press for the mediumto to large large store store with access. The ideal press for the medium to large store with restricted restrictedheight height access.
Product type description Product type description Product type description Pressing power Pressing power Pressing power Specific pressing power Specific pressing power Specific pressing power Press chamber depth Press chamber depth Press chamber depth Loading height Loading height Loading aperture width Loading height Loading aperture width Loading aperture height Loading aperture width Loading aperture height Press chamber width Loading aperture height Press chamber width Bale length width Press chamber Bale length Bale width Bale length Bale width Bale height Bale width Bale height Bale weight (max.) Bale height Bale weightof (max.) Number strappings Bale weight (max.) Number of strappings Strapping material Number of strappings Strapping material Cycle time in idle operation Strapping material Cycle timebale in idle operation Hourly output Cycle time idle operation Type of in door Hourly bale output Hourly bale output Door lock Type of door Type of door Driving power Door lock Door lock Depth Driving power Width Driving power Depth Height Depth Width Weight Width Height Height Weight Weight
HSM GmbH + Co. KG Austrasse 1 9 Frickingen HSM 88699 GmbH + Co. KG www.hsm.eu Tel. +49 (0) 75 54 / 2100-0 Fax +49 (0) 75 54 / 2100-160 info@hsm.eu Tel. +49 (0) 75 54 / 2100-0 www.v-press.com
HSM V-Press V-Press820 820 eco eco HSM V-Press 820 eco 178 kN kN 178 kN N/cm 19.23 N/cm 19.23 N/cm 780 mm mm 780 855 mm mm 855 mm 1200 mm 855 mm 1200 mm 610 mm 1200 mm 610 mm 1195 mm 610 mm 1195 mm 1200 mm mm 1195 1200 mm 780 mm 1200 mm 780 mm 1000 mm 780 mm 1000 mm 250 kg 1000 mm 250 kg 4 250 kg 4 Polyester tape 4 Polyester tape 23 s Polyester tape 23 2-s 5 23 Double 2 -s 5 Door 2 5 Handwheel Double Door Double 4 kW Door Handwheel Handwheel 997 mm 4 kW 1700 mm 4 kWmm 997 2470 997 mm 1700 mm mm 1300 kg 1700 2470 mm mm 2470 1300 mm kg 1300 kg
HSM GmbH +9 Co. KG Austrasse 1 Austrasse 19 88699 Frickingen 88699 Frickingen www.hsm.eu
Tel. Fax+49 +49(0) (0)75 7554 54//2100-0 2100-160 Fax +49 (0) 75 54 / 2100-160 info@hsm.eu info@hsm.eu www.v-press.com
67
Waste Management
The ideal press for the medium to large store with no restricted height access.
Product type description: Pressing power: Specific pressing power: Press chamber depth: Loading height: Loading aperture width: Loading aperture height: Press chamber width: Bale length: Bale width: Bale height: Bale weight (max.): Number of strappings: Strapping material: Cycle time in idle operation: Hourly bale output: Type of door: Door lock: Driving power: Depth: Width: Height: Weight: HSM V-Press 840 eco 356 kN 38.03 N/cm 780 mm 1100 mm 1195 mm 650 mm 1195 mm 1200 mm 780 mm 1200 mm 360 kg 4 Wire 32 s 2-3 Double door Handwheel 7.5 kW 1096 mm 1767 mm 2985 mm 1990 kg
Tel. +49 (0) 75 54 / 2100-0 Fax +49 (0) 75 54 / 2100-160 info@hsm.eu www.v-press.com
68
Waste Management
The ideal press for the medium to large store with no restricted height access.
Product type description Pressing power Specific pressing power Press chamber depth Loading height Loading aperture width Loading aperture height Press chamber width Bale length Bale width Bale height Bale weight (max.) Number of strappings Strapping material Cycle time in idle operation Hourly bale output Type of door Door lock Driving power Depth Width Height Weight HSM V-Press 840 plus 356 kN 38.03 N/cm 780 mm 1100 mm 1195 mm 650 mm 1195 mm 1200 mm 780 mm 1200 mm 360 kg 4 Wire 32 s 2-3 Sliding door Handwheel 7.5 kW 1247 mm 1767 mm 2985 mm 1990 kg
Tel. +49 (0) 75 54 / 2100-0 Fax +49 (0) 75 54 / 2100-160 info@hsm.eu www.v-press.com
69
Waste Management
The ideal press for the larger stores with no restricted height access.
Product type description: Pressing power: Specific pressing power: Press chamber depth: Loading height: Loading aperture width: Loading aperture height: Press chamber width: Bale length: Bale width: Bale height: Bale weight (max.) : Number of strappings: Strapping material: Cycle time in idle operation: Hourly bale output: Type of door: Door lock: Driving power: Depth: Width: Height: Weight: HSM V-Press 860 plus 532 kN 56.83 N/cm 780 mm 1100 mm 1195 mm 650 mm 1195 mm 1200 mm 780 mm 1200 mm 480 kg 4 Wire 46 s 1-2 Sliding door Handwheel 7.5 kW 1247 mm 1797 mm 2986 mm 2010 kg
Tel. +49 (0) 75 54 / 2100-0 Fax +49 (0) 75 54 / 2100-160 info@hsm.eu www.v-press.com
70
Waste Management
Tel. +49 (0) 75 54 / 2100-0 Fax +49 (0) 75 54 / 2100-160 info@hsm.eu www.v-press.com
71
Waste Management
HSM _V-PRESS 60
The mobile baling press HSM V-Press 60 compresses foils and lightweight packaging material (paper, cardboard) right where the material is.
Compresses plastic foils, paper bags, lightweight boxes and packing paper. Mobile on casters. Effortless to operate with a minimum amount of strength. No electric or hydraulic components no electricity, no servicing, no maintenance required. Produces well compressed, stackable bales. Product type description: Press chamber depth: Loading height: Loading aperture width: Press chamber width: Bale length: Bale width: Bale height: Bale weight (max.): Number of strappings: Strapping material: Door lock: Depth: Width: Height: Weight: HSM V-Press 60 635 mm 1015 mm 740 mm 740 mm 800 mm 600 mm 800 mm 40 kg 3 GARN lever 735 mm 810 mm 1280 mm 95 kg
Tel. +49 (0) 75 54 / 2100-0 Fax +49 (0) 75 54 / 2100-160 info@hsm.eu www.v-press.com
72
ABN 80 135196468
73
7 DELIVERY a. If Austlift specifies particular terms of delivery, carriage and insurance with respect to goods in a quotation provided by Austlift to the Purchaser, those terms and conditions will apply to the delivery, carriage and insurance of the relevant goods. b. If Austlift does not specify terms for delivery, carriage and insurance within a quotation provided to the Purchaser or there is no quotation, the purchaser shall arrange his own transport for the order. c. Austlift can arrange a transport service for your order at your cost. Deliveries are often arranged via our selected carrier on general freight (based on logistics and most economical pricing structure), and charges, where applicable are invoiced to customers accordingly. d. Any (part or complete) orders sourced via another branch shall incur freight transfer charges unless or until goods were to accompany general monthly stock transfers. DIMENSIONS AND MASSES Dimensions and masses published or quoted with respect to goods supplied by Austlift are based on standards and manufacturing specifications, therefore must be considered as approximate and for guidance only. All such measurements are subject to commercial tolerances and may also be subject to change without notice. CLAIMS BY THE PURCHASER a. All goods sold will be deemed to be of the required quantity and type unless a claim specifying particulars of deficiencies or incorrect type is made within seven (7) days after receipt of the goods by the Purchaser. b. Where products are on-forwarded by goods air, rail or carrier nominated by the Purchaser, then a receipt from the airline, railway or carrier shall be considered adequate proof of delivery and Austlifts liability with respect to loss or damage to the goods will cease upon delivery of the goods to the carrier. c. Where Austlift accepts responsibility for delivery of the goods, Austlift will not be liable to the Purchaser in relation to defective goods unless the Purchaser gives notice of the defect to Austlift in writing within seven (7) days after receipt of goods by the Purchaser. d. Except as specifically provided to the contrary in these conditions, Austlift shall in no case be liable in any way for goods damaged in transit.
10 CANCELLATIONS AND RETURNS FOR CREDIT a. Orders can only be cancelled or goods returned for credit with the prior written agreement of Austlift provided that the goods are returned in the same re-saleable conditions as when they were originally sold. Goods accepted for return must be despatched by a carrier nominated by Austlift, only after receiving a credit return authority number from Austlift (invoice number and date are required on all claims). Returns due to purchase error will incur a restocking charge of 15% and transportation costs of products will be for account of the Purchaser. b. Any goods specifically made and or procured on behalf the Purchaser, that meet the Purchasers specific request are not refundable for credit. 11 DELAYS IN DELIVERY Austlift will use its best endeavors to meet specified delivery dates and whether or not a delivery date is specified Austlift will be under no liability of any kind for any delay in delivery from any cause whatsoever. If for any reason beyond the control of Austlift, orders cannot be filled at the time stipulated by the Purchaser, Austlift shall be entitled to determine the relevant contract of sale and the Purchaser shall not have any claims against Austlift arising out of such cancellation, without prejudice to the rights of Austlift to recover all sums owing to it in respect of goods or services provided prior to the date of such determination. 12 PRODUCT SUITABLITY Except to the extent that Austlift has made express representations in writing (whether in catalogue or otherwise) as to safe working loads, the Purchaser shall be responsible for determining the fitness of goods sold by Austlift for the purpose for which they are intended and acknowledges that Austlift is not aware of that purpose and that he has not relied on Austlifts advice. 13 LIABILTY 13.1 Subject to statutory warranties that cannot be excluded, Austlift shall not be liable for any loss or damage whatsoever and howsoever arising whether direct, indirect or consequential or in respect of any claim whenever and however made for any loss or damage deterioration, deficiency or other fault or harm in the goods manufactured and/or delivered, work executed or services provided by or on behalf of or in any arrangement with Austlift or occasioned to the purchaser or any third or other party or to his or their property or interest and whether or not due to the negligence of Austlift its servants or agents.
74
13.2 13.3 As soon as any of the facts or matters which form any part of any claim or complaint whatsoever become known to the purchaser, the purchaser shall within fourteen (14) days notify Austlift in writing of the same. Austlift shall not be liable in any circumstances for any; (i) defects or damages caused in while or in part by misuse, abuse, neglect, electrical or other overload, non-suitable lubricant, improper installation, repair or alteration (other than by) or accident. (ii) any transport freight charges, installation, removal, labour or other cost; (ii) defects in goods not manufactured by it but endeavour to pass on to the purchaser the benefit of any claim made by Austlift and accepted by the manufacturer of such goods under a warranty given by the manufacturer of such goods provided that nothing contained in this subparagraph shall limit the rights of the purchaser to proceed against Austlift pursuant to the Trade Practices Act 1974. (iv) technical advice or assistance given or rendered by it to the purchaser or not in connection with the manufacture, construction or supply of goods for or to the purchaser provided always that Austlift has rendered such services with due care and skill and that any material supplied in connection with those services are reasonably fit for the purpose for which they are supplied. The exemptions, limitations, terms and conditions in these terms and conditions shall apply whether or not the loss or damage is caused by negligence or actions constituting fundamental breach of contract.
13.4
14. DEFAULT BANKRUPTCY ETC. If the Purchaser is in default in making payment for any goods whether the subject of the same or different orders, or if the purchaser being an individual shall become bankrupt or being a corporation shall take or have taken against it any steps having the object of winding-up or placing the Purchaser under any form of insolvency administration, Austlift shall be entitled by notice in writing to the Purchaser to require re-delivery to Austlift, at the cost and expense of the Purchaser of all goods which have not been paid for as aforesaid and for the purpose of recovering the goods. Austlift, its servants or agents may enter any land or building upon which Austlift believes the goods may be located within business hours without notice. 15. TITLE IN GOODS Notwithstanding anything to the contrary express or implied in these Conditions between Austlift and the Purchaser: a. Property in all goods supplied by Austlift to the Purchaser (Goods) shall remain with Austlift and shall not pass to the Purchaser until Austlift has received payment in full for the Goods and until all outstanding debts owed by the Purchaser to Austlift arising from the operation of the Account have been paid; b. Until such time as Austlift has received payment in full for the Goods and until all outstanding debts owed by the Purchaser to Austlift arising from the operation of the Account have been paid, the Purchaser shall hold the Goods as bailee for Austlift and shall store and identify the Goods in a manner which enables them to be clearly identified as Goods belonging to Austlift. c. As agent for Austlift, the Purchaser is authorised to sell any Goods supplied to the Purchaser by Austlift to third parties prior to the Due Date which is applicable in relation to payment for such goods. In the event of such sale, the Purchaser shall specifically earmark monies resulting from such sale and shall place the monies into a separate account to be held on trust for Austlift until such time as payment for those goods is made to Austlift, The Purchaser shall not represent to third parties that it is selling the Goods as agent for Austlift; d. In the event that the Purchaser fails to pay Austlift for Goods supplied by the Due Date, the Purchaser hereby agrees to deliver up the Goods to Austlift upon demand by Austlift and consents to Austlift retaking possession of the Goods and for this purpose the Purchaser authorises Austlift without notice, to enter upon the Purchasers premises in which such goods are stored to collect the Goods; e. In the event that the Purchaser commits an act of bankruptcy or where the Purchaser is a company, has a receiver, administrator or liquidator appointed to it or goes into any other form of insolvency administration, Austlift shall be entitled to immediate possession of the Goods supplied by it to the Purchaser remaining at that time in the possession of the Purchaser and is authorised to enter upon the Purchasers premises to collect such goods without prejudice to any other rights of Austlift; f. If Austlift retakes possession of any of the Goods pursuant to sub-clause (d) or (e) above, Austlift shall have the right to sell the Goods to any other party; and, g. The parties acknowledge that no charge or mortgage is intended to be created over the Goods supplied by Austlift to the Purchaser.
10 RISK The goods shall be at the Purchasers risk from the time of the first occurrence of any of the following events: a. the passing of property to the Purchaser; b. the physical delivery of the goods to the Purchaser; or c. the physical delivery to a carrier or other bailee whether named by the Purchaser or not Austlift shall be under no obligation to give its Purchaser a notice referred to in Section 35(3) of the Sale of Goods Act 1923. 17 DISCOUNTS NULLIFIED BY RECOVERY PROCEEDINGS If it becomes necessary to institute legal proceedings to recover unpaid debts to Austlift, all discounts showing on unpaid invoices become null and void and the total list prices showing become payable. 18 COSTS OF RECOVERY PROCEEDINGS In the event of the Purchasers default under these Conditions, the Purchaser shall pay to Austlift upon demand, all costs and expenses, including all recovery and legal costs (assessed on a solicitor and own client basis) incurred by Austlift in the enforcement of its rights with respect to that default. 19 CHANGE IN OWNERSHIP / EFFECTIVE CONTROL The Purchaser agrees to notify Austlift in writing of any change in ownership or effective control of the Purchaser within seven (7) days from the date of such change in effective control or ownership and indemnifies Austlift against any loss or damage incurred by Austlift as a result of the Purchasers failure to notify Austlift of any such change. 20 JURISDICTION The parties agree that the terms and conditions applying to any credit account opened in the name of the applicant and any other contract between Austlift and the Purchaser shall be governed by the laws of the State of New South Wales in force for the time being and from time to time, and the parties irrevocably submit generally and unconditionally to the jurisdiction of the Courts of New South Wales in respect of claims, proceedings and matters arising out of or in respect of the said credit account or any said contract. 21 PURCHASERS AUTHORITY The Purchaser agrees to be bound by the Terms and Conditions of Sale for Delivery. Claims on Delivery, Returned Goods, Transport Charges, Pricing Warranty and Written Contracts, when and where as stated on the current price list, invoices and/or notice sent to all customers of Austlift. If the Purchaser is a trustee, the directors warrant that they have authority and power to enter into this agreement and personally guarantee the performance of all the trusts obligations under this agreement. The Purchaser acknowledges that Austlift is entitled to presume that any person purporting to have the authority to bind the Purchaser to a contract in respect of goods and/or services from Austlift, has the authority they claim. 22 NOTICES Any notice by one party to the other shall be sufficiently served personally or by facsimile transmission, or if posted, by pre-paid post to the party to be served at the registered office of that party or its last known place of business or address and shall be deemed to have been received; a. within three (3) business days of the date of posting if served by post to an address in Australia b. within fourteen (14) days of the date of posting if served by post to an address outside of Australia, and c. immediately upon receipt of a successful transmission report by the sender if served by facsimile transmission. 23 CHARGE The Purchaser hereby charges with payment of any indebtedness to Austlift all beneficial interest (freehold and leasehold) in land and personal property held now or in the future by the Purchaser. Austlift may lodge a caveat noting the interest given by this charge on the title of any property of the Purchaser whenever it so wishes. 24 SERVICE The parties agree that service of any notices, demands, proceedings; statement of claim, suits or actions (process) upon the Purchaser may be effected by Austlift or its solicitors sending such process by prepaid post to the address given in the Credit Application as the address of the Purchaser. Services shall be deemed to have been effected two business days after the posting of the process.
75
Copyright Pacific Lifting 2013, Specifications and dimensions subject to change without notice.