Professional Documents
Culture Documents
Page 1 of 7
To define this Properties file, follow the steps below. To set up the Problem Definition file from within Aspen Batch Distillation: 1. 2. Start Aspen Batch Distillation. In the Simulation Explorer, click Component Lists.
3.
In the Contents of Component Lists pane, double click Default component list.
4. 5. 6.
In the message box that appears, click Yes to Initialize Properties now. Click Use Aspen Properties. Click Edit using Aspen Properties.
mk:@MSITStore:C:\Program%20Files\AspenTech\AMSystem%20V7.0\Help\ABS220.ch... 7/25/2011
Page 2 of 7
7.
mk:@MSITStore:C:\Program%20Files\AspenTech\AMSystem%20V7.0\Help\ABS220.ch... 7/25/2011
Page 3 of 7
Tip: You can use the Next button required. 8. 9. Click the Next button
On the Properties Specifications form, in the Property method field, select NRTL.
Tip: Clicking the pull-down arrow on the field and typing N (the first letter of the property method name) takes you to the right choice much faster than just scrolling down the long list.
10.
Click Next
You are taken to the binary parameters forms, where you can view the binary parameters that will be used for Properties Calculations.
mk:@MSITStore:C:\Program%20Files\AspenTech\AMSystem%20V7.0\Help\ABS220.ch... 7/25/2011
Page 4 of 7
11.
Click Next
mk:@MSITStore:C:\Program%20Files\AspenTech\AMSystem%20V7.0\Help\ABS220.ch... 7/25/2011
Page 5 of 7
12. There is no need for further input, so click OK. You are prompted as to whether to generate the Properties Plus input file now.
13.
14. Close Aspen Properties by clicking File | Exit. You are prompted with the following:
Click Yes to save the file. To define the components to use in the simulation, in the Available Components list (left pane), select both components. Move them to the Components list (right pane) by clicking the button.
mk:@MSITStore:C:\Program%20Files\AspenTech\AMSystem%20V7.0\Help\ABS220.ch... 7/25/2011
Page 6 of 7
18.
Click Edit Physical Properties to verify physical properties selections as shown below:
19. Click OK to close each window. The Property setup is now complete. See Also Step 2 Set up the flowsheet in Aspen Batch Distillation Step 3 Enter structural data and specifications for the Aspen Batch Distillation block Step 4 Enter Operating Steps
mk:@MSITStore:C:\Program%20Files\AspenTech\AMSystem%20V7.0\Help\ABS220.ch... 7/25/2011
Page 7 of 7
mk:@MSITStore:C:\Program%20Files\AspenTech\AMSystem%20V7.0\Help\ABS220.ch... 7/25/2011