Professional Documents
Culture Documents
TIS #1901
W56GARTRY1 W56GARDRIR
Method of Application:
1. Prior to installation it is the Owners responsibility to determine whether the structure is adequately reinforced to withsta nd the added weight of a fully saturated vegetative tray. This decision should be completed with the aid of a registered structural engineer. 2. Perform tray installation only after the Firestone Roofing System has been inspected and found to be in accordance with current Firestone Specifications. 3. Place the vegetative trays directly on the roofing membrane. 4. Using the interlocking sides overlap the vegetative trays to one another. 5. Secure the trays to each other using the 3/8 removable drive-pin fastener. 6. With trays secured in place, lay out drip irrigation lines, emitter side up, on top of retention layer. 7. Make connections of irrigation lines to water supply provided and install regulator to govern pressures exceeding 15 psi. 8. Conduct testing procedures to verify performance prior to installing growing medium. 9. Add growing media to a depth in accordance with the design plans and specifications. Depths range from 5-1/4 to 8 inches. 10. Add vegetative cover. 11. After all trays have been installed sufficiently water new plugs to ensure growth. Note: General maintenance (including watering and weeding) is the responsibility of the building owner. See the SkyScape Maintenance Guide at the Technical Database.
Precautions:
A certified Structural Engineer must be contacted prior to installation to ensure that the deck can withstand the weight of the Vegetative trays when fully saturated. To facilitate drainage a minimum roof slope of 1/8 in 12 must be provided. Vegetative Roofing Trays shall be installed between April 1 and November 1, but not when the weather is below 45 F (7.2 C) or above 95 F (35 C). Do not drag modules into position. Use caution when lifting trays. Check roof drains regularly to ensure there are no obstructions to impede water flow.
Compliance:
Post Consumer Recycled Content: Pre Consumer Recycled Content: Manufacturing Location: 0% 100% Not Applicable
Firestone Building Products 250 W. 96th Street, Indianapolis, IN 46260 Sales: (800) 428-4442 Technical (800) 428-4511 www.firestonebpco.com
S723-RFS-321
2.1.2012
Please Contact your Firestone Roof Systems Advisor at 1-800-428-4511 for further information.
This sheet is meant to highlight Firestone products and specifications and is subject to change without notice. Firestone takes responsibility for furnishing quality materials which meet published Firestone product specifications. Neither Firestone nor its representatives practice architecture. Firestone offers no opinion on and expressly disclaims any responsibility for the soundness of any structure. Firestone accepts no liability for structural failure or resultant damages . Consult a competent structural engineer prior to installation if the structural soundness or structural ability to properly support a planned installation is in question. No Firestone representative is authorized to vary this disclaimer.
Firestone Building Products 250 W. 96th Street, Indianapolis, IN 46260 Sales: (800) 428-4442 Technical (800) 428-4511 www.firestonebpco.com
S723-RFS-321
2.1.2012