Professional Documents
Culture Documents
DESCRIPTION
The H11GX series are photodarlington-type optically coupled optocouplers. These devices have a gallium arsenide infrared emitting diode coupled with a silicon darlington connected phototransistor which has an integral base-emitter resistor to optimize elevated temperature characteristics.
FEATURES
High BVCEO - Minimum 100 V for H11G1 - Minimum 80 V for H11G2 - Minimum 55 V for H11G3 High sensitivity to low input current Minimum 500 percent CTR at IF = 1 mA Low leakage current at elevated temperature (maximum 100 A at 80C) Underwriters Laboratory (UL) recognized File# E90700
APPLICATIONS
CMOS logic interface Telephone ring detector Low input TTL interface Power supply isolation Replace pulse transformer
ANODE 1 6 BASE
CATHODE 2
5 COLLECTOR
N/C 3
4 EMITTER
VCEO
PD
mW mW/C
7/21/00
200045A
TRANSFER CHARACTERISTICS
DC Characteristic EMITTER Current Transfer Ratio Collector to Emitter (IF = 1 mA, VCE = 5 V) (IF = 16 mA, IC = 50 mA) Saturation Voltage (IF = 1 mA, IC = 1 mA) (IF = 20 mA, IC = 50 mA) (IF = 10 mA, VCE = 1 V) CTR H11G1/2 H11G3 H11G1/2 VCE (SAT) H11G1/2 H11G3 5 (500) 2 (200) 0.85 0.75 0.85 1.0 1.0 1.2 V H11G1/2 100 (1000) mA (%) Test Conditions Symbol Device Min Typ** Max Unit
TRANSFER CHARACTERISTICS
Characteristic SWITCHING TIMES Turn-on Time Turn-off Time Test Conditions (RL = 100 1, IF = 10 mA) Symbol ton toff Device ALL ALL Min Typ** 5 100 Max Unit s
7/21/00
200045A
10
IF = 50 mA IF = 5 mA IF = 1 mA IF = 0.5 mA
0.1
0.01
0.1
0.001 0.1
10
0.01 -60
-40
-20
20
40
60
80
100
120
IF = 50 mA IF = 10 mA IF = 2 mA
100
VCE = 80V
10
10
VCE = 30V
IF = 1 mA IF = 0.5 mA
VCE = 10V 1
0.1
0.1
0.01 1 10
0.01 0 10 20 30 40 50 60 70 80 90 100
RL = 10
RL = 100
RL = 1k
7/21/00
200045A
3
0.270 (6.86) 0.240 (6.10)
PIN 1 ID.
4
SEATING PLANE
5
0.350 (8.89) 0.330 (8.38)
6
4 5 6
0.016 (0.41) 0.008 (0.20) 0.020 (0.51) MIN 0.100 (2.54) TYP
0 to 15
0.070 (1.78)
0.060 (1.52)
0.415 (10.54)
SEATING PLANE
0.295 (7.49)
0.004 (0.10) MIN
7/21/00
200045A
Description
Surface Mount Lead Bend Surface Mount; Tape and reel 0.4 Lead Spacing VDE 0884 VDE 0884, 0.4 Lead Spacing VDE 0884, Surface Mount VDE 0884, Surface Mount, Tape & Reel
0.1 MAX
10.30 0.20
1.6 0.1
7/21/00
200045A
MARKING INFORMATION
H11G1 V XX YY K
3 4 5
2 6
Denitions
1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option See order entry table) Two digit year code, e.g., 03 Two digit work week ranging from 01 to 53 Assembly package code
300 Temperature (C) 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 3 225 C peak
215C, 1030 s
Peak reflow temperature: 225C (package surface temperature) Time of temperature higher than 183C for 60150 seconds One time soldering reflow is recommended
Time (Minute)
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx FAST ActiveArray FASTr Bottomless FPS CoolFET FRFET CROSSVOLT GlobalOptoisolator DOME GTO EcoSPARK HiSeC E2CMOS I2C EnSigna i-Lo FACT ImpliedDisconnect FACT Quiet Series
ISOPLANAR LittleFET MICROCOUPLER MicroFET MicroPak MICROWIRE MSX MSXPro OCX OCXPro OPTOLOGIC Across the board. Around the world. OPTOPLANAR PACMAN The Power Franchise POP Programmable Active Droop
Power247 PowerEdge PowerSaver PowerTrench QFET QS QT Optoelectronics Quiet Series RapidConfigure RapidConnect SerDes SILENT SWITCHER SMART START SPM
Stealth SuperFET SuperSOT-3 SuperSOT-6 SuperSOT-8 SyncFET TinyLogic TINYOPTO TruTranslation UHC UltraFET VCX
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I13