Professional Documents
Culture Documents
ADAPTER APPLICATIONS: WE ARE NOT ABLE TO IDENTIFY EVERY APPLICATION THIS IS ONLY A GUIDE, PLEASE REPER TO PAGES TO THE INJECTOR INDEX.
ACCESSORY INFORMATION: REFER TO PAGES FOR THE BEST PERFORMANCE, CLEANED INJECTORS SHOULD BE INSTALLED IN VEHICLE IMMEDIATELY AFTER SERVICING WITH ASNU.
SHELF LIFE: SERVICED INJECTORS THAT WILL NOT BE RE-INSTALLED TO A VEHICLE ENGINE MUST BE TREATED WITH AN INHIBITER AND FITTED WITH EITHER 2-15110 OR 2-15114 DUST PROTECTION CAPS. FAILURE TO FOLLOW RECOMENDATIONS COULD RESULT IN SEIZURE OF INTERNAL COMPONENTS. REFER TO ASNU OPERATION MANUAL FOR PROPER PROCEDURE.
DUST PROTECTION CAPS MUST BE INSTALLED TO PREVENT CONTAMINATION & PRESURVE INJECTOR SHELF LIFE. SEE INJECTOR INDEX TO SELECT PROPER PROTECTIVE CAPS. IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Page 2
Copyright 2009 ASNU Corporation All Rights Reserved
Machine Warranty
All repairs or replacements of machines will be handled NAPA Echlin DSM. All questions regarding inoperative machines will be conducted through your local NAPA Echlin DSM. If a machine breaks down and repairs cannot be determined in the field, the NAPA Echlin DSM will get authorization to ship the machine back to the factory for repairs or replacement for up to one year after purchase. The customer will be instructed where to ship the machine prepaid and then all freight charges will be re-reimbursed. If the customer is able to determine the problem causing an inoperative machine, upon approval of the NAPA Echlin DSM, the necessary parts will be shipped on a no charge basis for up to one year after purchase. The customer will perform the replacement of these parts. No labor will be paid for customer installed components. In instances where the machine has been damaged due to user neglect, we will ship parts for a charge, plus freight. If repairs are done at the ASNU repair center, all freight, parts and labor are the responsibility of the user. After the 12 month warranty period, the user may continue to have the machine serviced at the ASNU Repair Center, on a labor, materials and freight cost basis. The ASNU Repair Center will not be responsible for any damage which occurs during the shipment of a machine back to the user.
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Page 3
Copyright 2009 ASNU Corporation All Rights Reserved
Machine Warranty
DELPHI Page
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 1 Page 1
Copyright 2009 ASNU Corporation All Rights Reserved
Injector Index
BOSCH Page
IMPORTANT IMPORTANT
Many Many injectors injectors look look alike. alike. The The illustrations illustrations shown shown in in this this catalogue catalogue are are the the best best possible possible representations representations & & should should be be used used only only as as a a guide. guide. Prior Prior to to selecting selecting injector injector components components & & before before disassembling, disassembling, always always inspect inspect the the injector injector to to be be serviced. serviced. Match Match & & select select the the components components with with the the injector. injector. Ensuring Ensuring they they are are suitable suitable for for use. use.
Page 2
Copyright 2009 ASNU Corporation All Rights Reserved
Injector Index
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Page 3
Copyright 2009 ASNU Corporation All Rights Reserved
Injector Index
ROCHESTER/WEBER Page
ROCHESTER/WEBER Page
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Page 4
Copyright 2009 ASNU Corporation All Rights Reserved
Injector Index
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Page 5
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
2-15662 SPACER-1mm
GM / BMW MERCEDES (16V & 24V ENGINES) BOSCH MULTI HOLE TYPE 2-15536 with filter in.
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 1
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
2-15109 SPACER
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 2
Copyright 2009 ASNU Corporation All Rights Reserved
NA FILTER
ROVER / BMW SAAB / PSA LUCAS IDISC Use Test Adapter 2-15536 with filter in. 2-15511 Test Adapter for injectors with filter removed 2-15536 Test Adapter for injectors with filter installed
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 3
Copyright 2009 ASNU Corporation All Rights Reserved
NA FILTER
NA PINTLE CAP
2-15012 SPACER
2-15004 O-RING
FORD / FIAT PSA (EUROPE) Weber Use Test Adapter 2-15536 with filter in. 2-15511 Test Adapter for injectors with filter removed 2-15536 Test Adapter for injectors with filter installed 2-15502 Universal Injector Wire Harness
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 4
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
2-15009 O-RING
FORD / FIAT PSA (EUROPE) Weber Use Test Adapter 2-15536 with filter in.
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 5
Copyright 2009 ASNU Corporation All Rights Reserved
2-15015 O-RING
PINTLE CAP CANNOT BE REPLACED. DO NOT REMOVE FOR INJECTOR CLEANING OR TESTING
2-15016 GROMMET
2-15064 FILTER
2-15114 CAP
2-15110 CAP
HONDA KEIHIN STYLE Use Test Adapter 2-15538 with filter in.
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 6
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
PLASTIC O'RING RETAINING WASHER NOT YET AVAILABLE, REMOVE CAREFULLY AND RE-USE OLD WASHER
VARIOUS VEHICLES BOSCH EV6 MULTIPOINT Use Test Adapter 2-15538 use Adapter 2-15640 plate in fuel rail for testing
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 7
Copyright 2009 ASNU Corporation All Rights Reserved
2O-RING (LOWER)
2O-RING (UPPER)
2-15001 FILTER
BUICK Delphi production Use Injector Adapter 2-15536 Use custom harness 2-15637
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 8
Copyright 2009 ASNU Corporation All Rights Reserved
2-15006 O-RING
2-15001 FILTER
2-15110 CAP
2-15114 CAP
2-15010 O-RING
2-15024 FERRULE
2-15011 SEAL
GM / JAGUAR FIAT-ALFA Use Adapter 2-15537 with hose and filter installed 2-15511 Test Adapter for injectors with filter removed 2-15537 Tests injectors with hose & filter installed 2-15502 Universal Injector Wire Harness
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 9
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
2-15006 O-RING
2-15011 SEAL
2-15110 CAP
2-15114 CAP
2-15024 FERRULE
MERCEDES JAGUAR / VOLVO BOSCH D-JETRONIC Use Adapter 2-15537 with hose installed Use Adapter 2-15511 without hose and filter installed Connect Injectors with 2-15502 Universal Harness 2-15511 (ASNU 51) Test Adapter for injectors with filter removed
2-15537 (ASNU 58) Tests injectors with hose & filter installed
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 10
Copyright 2009 ASNU Corporation All Rights Reserved
2-15012 WASHER
2-15001 FILTER
2-15110 CAP
2-15114 CAP
GM / SAAB Chimney Style Aliminium Pintle Cap 2-15536 with filter in Replacement cap not available, remove and replace with 2-15672
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 11
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
2-15110 CAP
2-15114 CAP
2-15007 bushing
FORD / HYUNDAI MAZDA / PROTON Pintle type with SINGLE SPRAY exit hole. For Multi Hole Spray See page 25 Use Test Adapter 2-15538 with filter in
2-15009 O'RING
2-15102 O'RING
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 12
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
2-15110 CAP
CADILLAC Use Test Adapter 2-15511 Connect Injectors with 2-15502 Universal Harness
2-15302 O-RING
Test Adapter 2-15511 tests injectors with hose & filter removed
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 13
Copyright 2009 ASNU Corporation All Rights Reserved
2-15002 O-RING
2-15114 CAP
2-15110 CAP
Test Adapter 2-15535 10mm Female Coupling For Male K-Jet & Cold Start
Test Adapter 2-15514 8mm Male Coupling for Female K-Jet & Cold Start
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 14
Copyright 2009 ASNU Corporation All Rights Reserved
2-15009 O-RING
2-15106 BUSHING
2-15001 FILTER
2-15114 CAP
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 15
Copyright 2009 ASNU Corporation All Rights Reserved
2-15009 O-RING
2-15001 FILTER
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 16
Copyright 2009 ASNU Corporation All Rights Reserved
2-15009 O-RING
2-15033 COLLAR
CHRYSLER
NISSAN Use Test Adapter 2-15538 with filter in Connect Injectors w/ 2-15502 Universal Harness
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 17
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
2-15006 O-RING
2-15009 O-RING
2-15051 BUSHING
NISSAN Use Test Adapter 2-15538 with filter in Connect injectors w/ 2-15502 Universal Harness
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 18
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 19
Copyright 2009 ASNU Corporation All Rights Reserved
2-15501 FILTER
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 20
Copyright 2009 ASNU Corporation All Rights Reserved
CITROEN PEUGEOT- GDI SIEMENS Gasoline Direct Injection Use Test Adapter ASNU 56 with filter in
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 21
Copyright 2009 ASNU Corporation All Rights Reserved
TO TEST: REMOVE TOP O'RING & SPLIT WASHER. REPLACE WITH 2 x 2-15004 & USE 2-15536 COUPLING
ASNU 20 FILTER
MITSUBUSHI HITACHI - GDI Gasoline Direct Injection Use Test Adapter 2-15536 with filter in
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 22
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
FORD - GDI BOSCH Gasoline Direct Injection Use Test Adapter 2-15536 with filter in
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 23
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
VW - GDI Bosch Gasoline Direct Injection Use Test Adapter 2-15536 with filter in
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 24
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
FORD - USA BOSCH Use Test Adapter 2-15536 with filter in Use 2-15640 Adapter Plate in fuel rail for testing
Test Adapter 2-15511 tests injectors with hose & filter removed
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 25
Copyright 2009 ASNU Corporation All Rights Reserved
ASNU 04 FILTER
CITROEN PEUGEOT RENAULT FIAT Weber & Siemens Use Test Adapter 2-15536 with filter in Use 2-15640 Adapter Plate in fuel rail for testing
Test Adapter 2-15511 tests injectors with hose & filter removed
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 26
Copyright 2009 ASNU Corporation All Rights Reserved
ASNU 03 FILTER
Test Adapter 2-15511 tests injectors with hose & filter removed
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 27
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
Test Adapter 2-15511 tests injectors with hose & filter removed
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 28
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 29
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 30
Copyright 2009 ASNU Corporation All Rights Reserved
2-15001 FILTER
Test Adapter 2-15511 tests injectors with hose & filter removed
BMW / KIA Air Assisted Sagem Use Tests Adapter 2-15536 with filter in
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 3 Page 31
Copyright 2009 ASNU Corporation All Rights Reserved
WEBER / ROCHESTER LARGE MONO POINT / SINGLE POINT TBI (USA) Use Test Adapter 2-15518 (single injector block includes custom harness) or Use Test Adapter 2-15598 (twin injector block includes custom harness)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 1
Copyright 2009 ASNU Corporation All Rights Reserved
2-15110 CAP
VARIOUS APPLICATIONS WEBER / ROCHESTER SMALL MONO POINT / SINGLE POINT TBI (USA) Use Test Adapter 2-15519 (single injector block includes custom harness) or Use Test Adapter 2-15632 4 injector block (includes custom harness) 2-15519 ADAPTER BLOCK 2-15632 ADAPTER BLOCK & HARNESS GM TBI MULTEC 700
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 2
Copyright 2009 ASNU Corporation All Rights Reserved
2-15065 FILTER
2-15669
CHRYSLER CFI SINGLE UNIT BOSCH (LONG VERSION) Use Test Adapter 2-15597 (single block) or Test Adapter 2-15528(twin block)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 3
Copyright 2009 ASNU Corporation All Rights Reserved
2-15077 FILTER
2-15673 O-RING
2-15635 CAP
NISSAN / SUBARU SINGLE POINT Use Test Adapter 2-15523 (single block) MULTI POINT Use Adapter 2-15608 (6 inj. block) Connect injectors with universal harness 2-15502 2-15523 SINGLE BLOCK Use 2-15608 4 INJ. BLOCK 2-15608 6 INJ. BLOCK
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 4
Copyright 2009 ASNU Corporation All Rights Reserved
VARIOUS APPLICATIONS BOSCH MONOPOINT / SINGLE POINT TBI (USA) Use Test Adapter 2-15524 (single block includes custom harness)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 5
Copyright 2009 ASNU Corporation All Rights Reserved
2-15065 FILTER
2-15659 SINGLE SPRAY PINTLE CAP BOSCH VARIOUS APPLICATIONS BOSCH, WEBER, DENSO, SIEMENS Use Test Adapter 2-15530 (block holds 4 injectors) or Test Adapter 2-15635 (block holds 6 injectors for Chrysler 3.5L) Connect injectors with universal harness 2-15502
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 6
Copyright 2009 ASNU Corporation All Rights Reserved
2-15114 CAP
NISSAN & TOYOTA Use Test Adapter 2-15598 (block holds 2 injectors, includes custom harness)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 7
Copyright 2009 ASNU Corporation All Rights Reserved
2-15050 2-15052 TOP O-RING Nissan / TOP O-RING Nissan / Toyota Toyota Housing seal (small) Housing seal (medium)
NISSAN JECS Use Test Adapter 2-15609 (block holds 6 injectors) Connect injectors with universal harness 2-15502
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 8
Copyright 2009 ASNU Corporation All Rights Reserved
2-15059 INSULATOR
2-15110 CAP
TOYOTA JECS Use Test Adapter 2-15606 (block holds 4 injectors) Connect injectors with universal harness 2-15502
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 9
Copyright 2009 ASNU Corporation All Rights Reserved
2-15114 CAP NISSAN JECS Use Test Adapter 2-15529 (block holds 4 injectors) Connect injectors with universal harness 2-15502
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 10
Copyright 2009 ASNU Corporation All Rights Reserved
REPLACEMENT FILTER CURRENTLY NOT AVAILABLE DO NOT REMOVE FILTER 2-15659 SINGLE SPRAY PINTLE CAP BOSCH
MAZDA NIPPON DENSO Use Test Adapter 2-15634 (Injector block) Connect injectors with universal harness 2-15502
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 11
Copyright 2009 ASNU Corporation All Rights Reserved
NISSAN JECS Use Test Adapter 2-15661 (4 Injector block) Connect injectors with universal harness 2-15502
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 12
Copyright 2009 ASNU Corporation All Rights Reserved
2-15110 CAP
HONDA CIVIC KEIHIN Use Test Adapter 2-15636 (double block) Connect injectors with universal harness 2-15502
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 13
Copyright 2009 ASNU Corporation All Rights Reserved
2-15110 CAP
HONDA CIVIC KEIHIN Use Test Adapter 2-15636 (double block) Connect injectors with universal harness 2-15502
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 14
Copyright 2009 ASNU Corporation All Rights Reserved
FORD CFI SINGLE UNIT BOSCH Use Test Adapter 2-15597 (single block) or Test Adapter 2-15528 (block)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 15
Copyright 2009 ASNU Corporation All Rights Reserved
2-15306 FILTER
NISSAN CFI SINGLE UNIT BOSCH Use Test Adapter 2 2-15597 (single block) or Test Adapter 2-15528 (twin block)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 16
Copyright 2009 ASNU Corporation All Rights Reserved
2-15065
FILTER
2-15322
O-RING (UPPER)
2-15321
O-RING (LOWER)
2-15669 CHRYSLER CFI SINGLE UNIT BOSCH (LONG VERSION) 2-15597 (single block) or Test Adapter 2-15528 (twin block)
2-15597
(single block w/harness)
2-15528
(twin block w/harness)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 17
Copyright 2009 ASNU Corporation All Rights Reserved
2-15027 O-RING
2-15026 O-RING
REPLACEMENT FILTER CURRENTLY NOT AVAILABLE DO NOT REMOVE FILTER 2-15114 DUST CAP
2-15525
HARNESS
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 4 Page 18
Copyright 2009 ASNU Corporation All Rights Reserved
Vortec Injectors
SPRAYING
SECURING
FLOWING
2-15631 Test Adapter Kit Includes plastic cleaning tray (see below) for ultrasonic cleaning of individual injector coils & frame mount shown below. Injector components not available at this time
Use Test Adapter 2-15631 (tests & cleans complete assembly ) Connect injectors with 2-15629 Universal Harness GM VORTEC 4.3L V-6 & 5.7L CPI
2-15631 Test Adapter Stainless Steel Frame in Anodized Aluminum Rail Complete with cleaning tray
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 5 Page 1
Copyright 2009 ASNU Corporation All Rights Reserved
Vortec Injectors
Vor-
Vor-
GM VORTEC 4.3L V-6 CPI MODELS 92-95 Use Test Adapter 2-15630 (tests complete assembly)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 5 Page 2
Copyright 2009 ASNU Corporation All Rights Reserved
2-15532 8MM FEMALE ADAPTER COUPLING FOR 8MM MALE COLD START INJECTOR
2-15533 10MM MALE ADAPTER COUPLING FOR 10MM FEMALE COLD START INJECTOR
2-15535 10MM FEMALE ADAPTER COUPLING FOR 10MM MALE COLD START INJECTOR
2-15511 ADAPTER COUPLING TOP FEED MULTIPORT INJECTORS WITH FILTER BASKET REMOVED
2-15512
2-15511 COUPLING
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 6 Page 1
Copyright 2009 ASNU Corporation All Rights Reserved
2-15514 8MM MALE ADAPTER COUPLING FOR 10MM FEMALE CIS (K-JET)
2-15515 12MM FEMALE ADAPTER COUPLING FOR 12MM MALE CIS (K-JET)
NOT AVAILABLE
ASNU 56 ADAPTER COUPLING FOR SLIM TOP SIEMENS GDI INJECTORS TESTS INJECTORS WITHOUT REMOVING INLET FILTER
2-15536 ADAPTER COUPLING BOSCH, LUCAS, WEBER, MARELLI, SIEMENS TESTS INJECTORS WITHOUT REMOVING INLET FILTER
2-15537 ADAPTER COUPLING TESTS MULTIPORT INJECTORS WITH FUEL HOSE INSTALLED
2-15538 ADAPTER COUPLING SLIM TYPE DENSO TESTS INJECTORS WITHOUT REMOVING INLET FILTER
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 6 Page 2
Copyright 2009 ASNU Corporation All Rights Reserved
Injector Index
2-15518 ADAPTER BLOCK GM TBI MAXI WITH CUSTOM HARNESS (single block - use 2-15598 for double block)
2-15519 ADAPTER BLOCK GM TBI MULTEC WITH CUSTOM HARNESS (single block - use 2-15632 for Quad Block)
2-15526 ADAPTER BLOCK FORD CFI - HOLLEY SPI CHRYSLER & BOSCH WITH CUSTOM HARNESS (single block - use 2-15528 for double block)
2-15522 ADAPTER KIT MITSUBISHI MPI WITH CUSTOM HARNESS (Tests 2 injectors)
2-15530 ADAPTER BLOCK FORD ZETA MPI / SPI (BOSCH / WEBER / SIEMENS / DENSO) (Tests 4 injectors)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 6 Page 3
Copyright 2009 ASNU Corporation All Rights Reserved
DISCONTINUED
DISCONTINUED
COMPONENT ASSTS 2-15100 / FILTERS & CAPS 2-15200 /O'RINGS-SEALS 2-15300 /MONOPOINT KIT
2-15639 PINTLE PINTLECAP CAP& & FILTER FILTER BASKET BASKET ASSEMBLY TOOL
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 6 Page 4
Copyright 2009 ASNU Corporation All Rights Reserved
2-15640 WEBER / SIEMENS TOP FEED MULTIPOINT "MINI PECO INJECTOR" ADAPTER PLATE
2-15531 TBI ADAPTER RING USE W/ 2-15507 CRADLE LARGE TBI INJECTORS (GM MAXI)
2-15601 TBI ADAPTER RING USE W/ 2-15507 CRADLE SMALL TBI INJECTORS GM MULTEC / DAEWOO
2-15641 SIDE FEED INJECTOR CLEANING TRAY (SHALLOW) ASNU 1992 onward 2-15600 ASNU UPTO 1992 (DEEP)
2-15598 ADAPTER BLOCK GM TBI MAXI (Tests 2 injectors, includes custom harness)
2-15607 ADAPTER BLOCK NISSAN / TOYOTA 2 WIRE (Tests 2 injectors, includes blanking off plug & custom harness
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 6 Page 5
Copyright 2009 ASNU Corporation All Rights Reserved
Injector Index
2-15606 ADAPTER BLOCK TOYOTA JECS MPI PREVIA / TARAGO (Tests 6 injectors)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 6 Page 6
Copyright 2009 ASNU Corporation All Rights Reserved
Injector Index
2-15631 ADAPTER KIT GM VORTEC 4.3L & 5.7L LATE VERSION (Tests complete assembly includes cleaning tray)
SPRAYING
SECURING
FLOWING
Echlin Part Numbers 2-15630 and 2-15631 Adapters comes complete with 2-15629 harness and plastic cleaning tray for ultrasonic cleaning of individual injector coils. 2-15629 Harness assembly is a available separately. The later GM Vortec (late) system is a Multi Point operation with 6 or 8 individual injectors mounted in the housing, allowing either a simultaneous or sequential injection delivery. The fuel is pressurized into the injector housing and as the injector is electronically opened, the fuel is pressure fed into a nylon delivery tube. At the end of the tube is a pressure poppet valve. The poppet valve sits in the inlet manifold and can be subject to extremely harsh conditions that may affect the performance of the valve. The opening and closing of the poppet valve is controlled by pressure and determines the fuel distribution, fuel atomization and the fuel delivery to each cylinder. The is therefore very important to examine the performance of this system, both before servicing (to understand the cause of the engine problem) and after, to ensure the cause of the problem had been eliminated and that the system is working properly.
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 6 Page 7
Copyright 2009 ASNU Corporation All Rights Reserved
Injector Index
2-15631 ADAPTER KIT GM VORTEC 4.3L & 5.7L LATE VERSION (Tests complete assembly includes cleaning tray)
2-15635 ADAPTER BLOCK FORD ZETA / SIEMENS CHRYSLER 3.5L (Tests 6 injectors)
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 6 Page 8
Copyright 2009 ASNU Corporation All Rights Reserved
2-15637
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 6 Page 9
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Section 6 Page 10
Copyright 2009 ASNU Corporation All Rights Reserved
Section 7 Page 1
Copyright 2009 ASNU Corporation All Rights Reserved
Page 2
Copyright 2009 ASNU Corporation All Rights Reserved
Page 3
Copyright 2009 ASNU Corporation All Rights Reserved
Page 4
Copyright 2009 ASNU Corporation All Rights Reserved
Page 5
Copyright 2009 ASNU Corporation All Rights Reserved
Page 6
Copyright 2009 ASNU Corporation All Rights Reserved
Page 7
Copyright 2009 ASNU Corporation All Rights Reserved
IMPORTANT
Many injectors look alike. The illustrations shown in this catalogue are the best possible representations & should be used only as a guide. Prior to selecting injector components & before disassembling, always inspect the injector to be serviced. Match & select the components with the injector. Ensuring they are suitable for use.
Page 8
Copyright 2009 ASNU Corporation All Rights Reserved