Professional Documents
Culture Documents
We can introduce the triple integral similar to double integral as a limit of a Riemann sum. We start from the simplest case when the reg of integration U is a rectangular box (Figure 1).
Fig.1 Let the set of numbers {x0, x1, ..., xm} be a partition of [a, b] into small intervals so that the following relations are valid:
Similarly, we can construct partitions of the segment [c, d] along the y-axis and the segment [p, q] along the z-axis:
is defined by
Here (ui , vj , wk) is some point in the rectangular box (xi1, xi)(yi1, yi)(zi1, zi), and the differences are
The triple integral of a function f (x,y,z) in the parallelepiped maximum values of the differences xi, yj and zk approach zero:
To define the triple integral over a general region U, we choose a rectangular box
Then the triple integral of the function f (x,y,z) over a general region U is defined as
Let f (x,y,z) and g (x,y,z) be functions which are integrable in the region U. Then the following properties are valid:
1.
2.
3.
, where k is a constant;
4.
If
5.
6.
Let m be the minimum and M be the maximum value of a continuous function f (x,y,z) in the region U. Thenthe following estimate is valid for the triple integral:
7.
The Mean Value Theorem for Triple Integrals. If a function f (x,y,z) is continuous in the region U, then there exists a point M0
U such that
Example 1
From here we can get the maximum value of the triple integral:
Example 2
Solution.
Triple Integrals in Cartesian Coordinates Calculation of a triple integral in Cartesian coordinates can be reduced to the consequent calculation of three integrals of one variable.
Consider the case when a three dimensional region U is a type I region, i.e. any straight line parallel to the z-axis intersects the boundar the region U in no more than 2 points. Let the region U be bounded below by the surface z = z1(x,y), and above by the surface z = z2(x,y) (Figure 1). The projection of the solid U onto the xy-plane is the region D (Figure 2). We suppose that the functions z1(x,y) and z2(x,y) are continuous in the region D.
Fig.1 Then for any function f (x,y,z) continuous in the region U we can write the relation:
Fig.2
Thus, calculating a triple integral is reduced to calculating a double integral, where the integrand is an one-dimensional integral. In the case, we need first to calculate the inner integral with respect to the variable z, and then the double integral with respect to the variables x and y. If D(x,y) is a type I region in the xy-plane (see Iterated Integrals), which is bounded by the lines
where f1(x), f2(x) are continuous functions on the intervals [a,b] and f1(x) f2(x), then writing the double integral as an iterated integra get
where the functions 1(y), 2(y) are continuous on the interval [c,d] so that 1(y) 2(y), we can rewrite the formula forthe triple inte as
The formulas (1) and (2) are an application of Fubini's theorem to triple integral. They enable us to reduce the computation of triple inte to iterated integrals.
In the particular case when the region of integration U is the rectangular box
Similar formulas for triple integrals exist for the solid regions U of type II or III. The projection of a solid region of type II is the region D(y,z) in the yz-plane, and, respectively, the projection of a solid region of type III is the region D(x,z) inthe xz-plane. Finally, if a solid region of integration U is more complex than considered above, we can break the region U into two or more smaller regions, each of which can be integrated separately. Example 1 Evaluate the integral
Solution. Applying the Fubini's theorem, we can calculate the iterated integral starting from the inner one:
where the region U lies in the first octant below the plane 3x + 2y + z = 6. Solution. Rewrite the equation of the plane 3x + 2y + z = 6 in the form:
Fig.3 Fig.4 The limits of integrations for z range from z = 0 to z = 6 3x 2y. Considering the projection D in the xy-plane, we find that the
Fig.5
Fig.6
Solution. The projection of the solid region U onto the xy-plane looks as shown in Figure 6. Taking this into account, we findthe corresponding iterated integral:
Example 4
Express the triple integral through iterated integrals in six different ways. The region U lies in the first octant and is boun by the cylinder x2 + z2 = 4 and the plane y = 3 (Figure 7). Find the value of the integral.
Fig.7 Solution. If the order of integration is "z-y-x", then the iterated integral can be written as
Fig.8
Similarly, we can write the iterated integral to carry out the integration in the order "z-x-y":
Now we consider the case of "x-y-z", i.e. when the first inner integral is taken over the variable x. Then
Since the projection of the solid onto the yz-plane is a rectangle (Figure 8), then by changing the order of integration over yand z, we ha
Finally we can write the iterated integral in the order "y-x-z" (starting from the inner integral):
We can use any of the iterated integrals to calculate the value of the initial triple integral. Taking the last one, we get
As a result, we obtain:
It is easy to check that this value is just 1/4 of the volume of the cylinder hange of Variables in Triple Integrals
As with double integrals, triple integrals can often be easier to evaluate by making the change of variables. This allows to simplify the r of integration or the integrand. Let a triple integral be given in the Cartesian coordinates x, y, z in the region U:
We need to calculate this integral in the new coordinates u, v, w. The relation between the old and new coordinates is given by It is supposed here that the following conditions are satisfied: 1. The functions , , are continuous together with their partial derivatives;
2.
There's a single valued relation between points of the region of integration U in the xyz-space and points ofthe region the uvw-space;
3.
is non-zero and keeps a constant sign everywhere in the region of integration U. Then the formula for change of variables in triple integrals is written as
Here
Triple integrals are often easier to evaluate in the cylindrical or spherical coordinates. The corresponding examples are considered on th pages Triple Integrals in Cylindrical Coordinates Triple Integrals in Spherical Coordinates
Some examples of using other transformations of coordinates are given below. Example 1 Find the volume of the region U defined by the inequalities
Solution. Obviously, this region is a parallelepiped. It's convinient to change variables in such a way to transform the parallelepiped into a rectan box. In this case the triple integral becomes the product of three integrals of one variable. Make the following replacement: The region of integration U' in the new variables u, v, w is defined by the inequalities The volume of the solid is
Calculate the Jacobian of this transformation. In order to not express the old variables x, y, z through the new ones u, v, w, we find first Jacobian of the inverse transformation:
Then
Solution. Introduce the new variables Calculate the Jacobian of the inverse transformation:
By expanding the determinant along the third row, we find its value to be
The position of a point M(x,y,z) in the xyz-space in cylindrical coordinates is defined by three numbers: , , z , where is the projecti the radius vector of the point M onto the xy-plane, is the angle formed by the projection of the radius vector with the x-axis (Figure 1 the projection of the radius vector on the z-axis (its value is the same in Cartesian and cylindrical coordinates).
Fig.1 The relationship between cylindrical and Cartesian coordinates of a point is given by We assume here that The Jacobian of transformation from Cartesian to cylindrical coordinates is
Then the formula of change of variables for this transformation can be written in the form
Transition from clindrical coordinates makes calculation of triple integrals simpler in those cases when the region of integration is form a cylindrical surface. Example 1 Evaluate the integral
where the region U is bounded by the surface x2 + y2 1 and the planes z = 0, z = 1 (Figure 2).
Fig.2
Fig.3
Solution. It is more convenient to calculate this integral in cylindrical coordinates. Projection of the region of integration ontothe xy-plane is the circle x2 + y2 1 or 0 1 (Figure 3). Notice that the integrand can be written as
The second integral contains the factor which is the Jacobian of transformation of the Cartesian coordinates into cylindrical coordinat All the three integrals over each of the variables do not depend on each other. As a result the triple integral is easy to calculate as
Fig.4
Fig.5
Solution. The region of integrations is shown in Figure 4. To calculate the integral we convert it to cylindrical coordinates: The differential of this transformation is The equation of the parabolic surface becomes
The projection of the region of integration U onto the xy-plane is the circle x2 + y2 9 with radius = 3 (Figure 5). The coordinate ra from 0 to 3, the angle ranges from 0 to 2, and the coordinate z ranges from 2/3 to 3. As a result, the integral becomes
Fig.6
Fig.7
Solution. The region of integration U is shown in Figure 6. Its projection on the xy-plane is the circle x2 + y2 = 22 (Figure 7). The new variables in the cylindrical coordinates range within the limits: Substituting x = cos and y = sin , we find the value of the integral:
The region U is bounded by the paraboloid z = 4 x2 y2, by the cylinder x2 + y2 = 4 and by the planes y = 0, z = 0(Figure 8).
Fig.8
Fig.9
Solution. By sketching the region of integration U (Figure 9), we see that its projection on the xy-plane (the region D) is the half-circle of radius We convert to cylindrical coordinates using the substitutions The new variables will range within the limits Now we can calculate the integral:
where the region U is bounded by the planes z = x + 1, z = 0 and by the cylindrical surfaces x2 + y2 = 1, x2 + y2 = 4(Figure 10).
Fig.10 Solution. We calculate this integral in cylindrical coordinates. From the condition it follows that
Fig.11
The projection of the region of integration onto the xy-plane is the ring formed by the two circles: x2 + y2 = 1 andx2 + y2 = 4 (Figure 1 Hence, the variables and range in the interval Calculate the integral:
This result is natural as the region U is symmetric about the xz-plane, and the integrand is even.
Triple Integrals in Spherical Coordinates The spherical coordinates of a point M(x,y,z) are defined to be the three numbers: , , , where is the length of the radius vector to the point M; is the angle between the projection of the radius vector is the angle of deviation of the radius vector on the xy-plane and the x-axis; from the positive direction of the z-axis (Figure 1).
Fig.1 It's important to take into account that the definition of differs in spherical and cylindrical coordinates. The spherical coordinates of a point are related to its Cartesian coordinates as follows:
It is easier to calculate triple integrals in spherical coordinates when the region of integration U is a ball (or some portion of it) and/or w the integrand is a kind of f (x2 + y2 + z2).
It is sometimes more convenient to use so-called generalized spherical coordinates, related to the Cartesian coordinates by the formulas In this case the Jacobian is
Example 1
Solution. As the region U is a ball and the integrand is expressed by a function depending on f (x2 + y2 + z2), we can convert the triple integral to spherical coordinates. Make the substitution: The new variables range within the limits: Taking into account the Jacobian 2sin , we can write the integral as follows:
where the region U is the unit ball x2 + y2 + z2 1. Solution. This ball is centered at the origin. Hence, the region of integration U in spherical coordinates is described by the inequalities Writing the integral in spherical coordinates, we have
As can be seen, the triple integral is transformed into the product of three single-valued integrals, each of which can be calculated independently. As a result, we obtain
Example 3
xyzdxdydz, where the region U is a portion of the ball x2 + y2 + z2 R2 lying in the first octantx 0, y 0,
Solution. We convert the integral to spherical coordinates. Change the variables: The new variables range within the limits:
Solution. To calculate the integral we use generalized spherical coordinates by making the following change of variables:
The absolute value of the Jacobian of the transformation is |I| = abc2sin . Therefore, the following relation is valid forthe differentials The integral in the new coordinates becomes
The region of integration U' (being an ellipsoid) in the new coordinates is defined by the inequalities Then the triple integral can be written as
using spherical coordinates. Solution. The region of integration is a portion of the ball lying in the first octant (Figures 2,3) and, hence, it is bounded bythe inequalities
Fig.3
Calculation of Volumes Using Triple Integrals The volume of a solid U in Cartesian coordinates xyz is given by
Example 1 Find the volume of the cone of height H and base radius R (Figure 2). Solution.
Fig.1
and the plane z = H (Figure 1). Its volume in Cartesian coordinates is expresse
Calculate this integral in cylindrical coordinates that range within the limits: As a result, we obtain (do not forget to include the Jacobian ):
Example 2
Solution. We calculate the volume of the part of the ball lying in the first octant (x 0, y 0, z 0), and then multiply the result by 8. This yields
As a result, we get the well-known expression for the volume of the ball of radius R. Example 3 Find the volume of the tetrahedron bounded by the planes passing through the points A (1;0;0), B (0;2;0), C (0;0;3) andthe coordinate planes Oxy, Oxz, Oyz (Figure 2).
Fig.2
Fig.3
Solution. The equation of the straight line AB in the xy-plane (Figure 3) is written as y = 2 2x. The variable x ranges here in the interval 0 x and the variable y ranges in the interval 0 y 2 2x.
Write the equation of the plane ABC in segment form. Since the plane ABC cuts the line segments 1, 2, and 3, respectively, on the x-, y and z-axis, then its equation can be written as
Hence, the limits of integration over the variable z range in the interval from z = 0 to of the tetrahedron:
Example 4 Find the volume of the tetrahedron bounded by the planes x + y + z = 5, x = 0, y = 0, z = 0 (Figure 4). Solution. The equation of the plane x + y + z = 5 can be rewritten in the form By setting z = 0, we get
Fig.4 Fig.5 Hence, the region of integration D in the xy-plane is bounded by the straight line y = 5 x as shown in Figure 5. Representing the triple integral as an iterated integral, we can find the volume of the tetrahedron:
Fig.6
Fig.7
Solution. Investigate intersection of the two paraboloids (Figure 6). Since 2 = x2 + y2, the equations of the paraboloids can be written as By setting z1 = z2 for the intersection curve, we obtain
Solution. It is easier to calculate the volume of the ellipsoid using generalized spherical coordinates. Let Since the absolute value of the Jacobian for transformation of Cartesian coordinates into generalized spherical coordinates is
hence, The volume of the ellipsoid is expressed through the triple integral:
By symmetry, we can find the volume of 1/8 part of the ellipsoid lying in the first octant (x 0, y 0, z 0), and then multiply the resu 8. The generalized spherical coordinates will range within the limits:
Example 7 Find the volume of the solid bounded by the sphere x2 + y2 + z2 = 6 and the paraboloid x2 + y2 = z.
Solution. We first determine the curve of intersection of these surfaces. Substituting the equation of the paraboloid into the equation of the sphere find:
The second root z2 = 3 corresponds to intersection of the sphere with the lower shell of the paraboloid. So we do not consider this cas Thus, intersection of the solids happens at z = 2. Obviously, the projection of the region of integration on the xy-plane is the circle (Fig defined by the equation x2 + y2 = 2.
Fig.8 Fig.9 The region of integration is bounded from above by the spherical surface, and from below by the paraboloid (Figure 9). The volume of the solid region is expressed by the integral
We change the variable: 2 = t. Here t = 0 when = 0, and, respectively, t = 2 when = 2. Now we can calculate the volume of the solid:
Example 8 Calculate the volume of the solid bounded by the paraboloid z = 2 x2 y2 and the conic surface .
Solution. First we investigate intersection of the two surfaces. By equating the coordinates z, we get the following equation:
Only the root t = 1 has the sense in the context of the given problem, i.e.
Thus, both the surfaces intersect at z = 1, and the intersection is a circle (Figure 10).
Fig.10 Fig.11 The region of integration is bounded from above by the paraboloid, and from below by the cone (Figure 11). To calculate the volume of the solid we use cylindrical coordinates:
As a result, we find:
Physical Applications of Triple Integrals Mass and Static Moments of a Solid Suppose we have a solid occupying a region U. Its volume density at a point M(x,y,z) is given by the function (x,y,z). Then the mass of the solid m is expressed through the triple integral as
The static moments of the solid about the coordinate planes Oxy, Oyz, Oxz are given by the formulas
The coordinates of the center of gravity of the solid are described by the expressions:
If a solid is homogeneous with density (x,y,z) = 1 for all points M(x,y,z) in the region U, then the center of gravity ofthe solid is determ only by the shape of the solid and is called the centroid. Moments of Inertia of a Solid The moments of inertia of a solid about the coordinate planes Oxy, Oxz, Oyz are given by
and the moments of inertia of a solid about the coordinate axes Ox, Oy, Oz are expressed by the formulas
As seen, the following properties are valid: The moment of inertia about the origin is called the integral
The moment of inertia about the origin can be expressed through the moments of inertia about the corodinate planes as follows:
Tensor of Inertia Using the 6 numbers considered above: Ix, Iy, Iz, Ixy, Ixz, Iyz, we can construct the so-called matrix of inertia or the tensor of inertia o solid:
This tensor is symmetric and, hence, it can be transformed to a diagonal view by choosing the appropriate coordinate axesOx', Oy', Oz' values of the diagonal elements (after transforming the tensor to a diagonal form) are called the main moments of inertia, and the indica directions of the axes are called the eigenvalues or the principal axes of inertia of the body.
If a body rotates about an axis which does not coincide with a principal axis of inertia, it will experience vibrations at the high rotation speeds. Therefore, when designing such devices it is necessary the axis of rotation to be coinciding with one of the principal axes of ine For example, when replacing car tires, it's often necessary to balance the wheels by attaching small lead weights to ensure the coinciden the rotation axis with the principal axis of inertia and to eliminate vibration. Gravitational Potential and Attraction Force The Newton potential of a body at a point P(x,y,z) is called the integral
The integration is performed over the whole volume of the body. Knowing the potential, one can calculate the force of attraction of the material point of mass m and the distributed body with the density (,,) by the formula where G is the gravitational constant. Example 1 Find the centroid of a homogeneous half-ball of radius R. Solution. Introduce the system of coordinates in such a way that the half-ball is located at z 0 and centered at the origin (Figure 1).
Fig.1 Using this system of coordinates, we find the centroid (the center of gravity) of the solid. Obviously, by symmetry, Calculate the coordinate of the centroid by the formula
Fig.2
The symbol V in the denominator denotes the volume of the solid, which is equal to
It remains to compute the triple integral . For this, we pass to spherical coordinates. In this case, the radial coordinate is denoted by r in order not to be confused with the density . As a result, we have
Example 2 Determine the mass and coordinates of the center of gravity of the unit cube with the density (x,y,z) = x + 2y + 3z (Figure 2). Solution. First we calculate the mass of the cube:
Example 3 Find the mass of a ball of radius R whose density is proportional to the squared distance from the center. Solution. According to the condition of the problem, the density is given by = ar2, where a is a constant, r is the distance fromthe center. It is convenient to calculate the mass of the ball in spherical coordinates:
Example 4 Find the moment of inertia of a right circular homogeneous cone about its axis. The cone has base radius R, height H andthe
Fig.3 Solution. The moment of inertia of a bodt about the z-axis is expressed by the formula
Because the cone is homogeneous, then the density (x,y,z) = 0 can be taken outside the integral sign:
We express the density 0 through the known mass of the cone m. Since
hence,
Finally we obtain
It is interesting that the moment of inertia of the cone does not depend on its height. Example 5
With what force does a homogeneous ball of mass M attract a material point of mass m, located at distance a from the center of the ball R)? Solution. Without sacrificing generality, the material point can be placed on the z-axis (Figure 4), so that its coordinate is (0, 0, a).
Fig.4 Fig.5 We solve the problem as follows. First, we calculate the potential of the ball, and then find the force of attraction of the point and the ba find the potential of the ball, it is more convenient to first determine the potential of the sphere (through the surface integral) instead of calculating the triple integral, and then get the result for the ball (by performing one more integration).
So, calculate the potential of the sphere of arbitrary radius r (r R). Consider a small area element dS on the sphere as shown in Figure The mass of this area element is where (r) is the sphere density and dr is its width. This sphere creates the potential at the point P, which is equal to
where the distance from the area element dS to the point P is expressed by the cosine theorem through a, r, .
, we get
Calculate separately the integral over the variable . We make the following substitution: Let Then
Now we can calculate the potential of the ball of radius R. We suppose for simplicity that the density of the ball is constant and equal to This yields
In this expression 4/3R3 = V is the volume of the ball, and 0V = M is the mass of the ball. Thus, we have proved thatthe gravitational potential of the ball at the distance a from the center of the ball (a > R) is expressed by the formula
Further, it is easy to find the force of attraction between the ball and the material point. Since the force is
The "minus" sign means that the force is directed opposite to the z-axis, i.e. it is the force of attraction.
As can be seen, the attractive force of the ball and the point has the same form as the force of attraction between two point masses! This one of the fundamental results in astrophysics and celestial mechanics. Because of this, the planets and stars can often be considered as material points in the description of their movement. To prove this result, Isaac Newton was even forced to postpone publication of his masterpiece on astronomy. Perhaps the difficulties were related to the fact that he did not use spherical coordinates to solve this problem Example 6 Suppose that a planet has a radius R and its density is expressed by the formula
Find the mass of the planet. Solution. Consider in detail the law of density variation. If = R, then
Fig.6 We calculate the mass of the planet using triple integral by the formula:
Since the volume of the planet is 4/3R3, the answer can be written in the form:
As can be seen, the mass of the planet is 25% more compared with the case when the density is distributed uniformly.