Professional Documents
Culture Documents
Drills 300/440/660W
Models
[W]
14CF...
300
450
80
45-1408-S
14CS...
440
850
82
R 45-1508-S
14-1489
14-2169
1-10
14CN...
660
1.075
84
14-1489
14-2169
1-10
15SF0...
15SF081-381)
5 300
300
77
15SF2...
15SF281-721) 15SF286-721)
5 300 750
370 300 78 R
45-1408-S (models 15SF081-38 and 15SF281-72 rear exhaust without overhose. Overhose for model 15SF286-72 included)
14-1485
DO-621
0-6,5
45 Angle head
12
DE-STA-CO
Drills 300/440/660W
Model
15SF081-38
Model
Recommended accessories
Applications
Dimensions
Weight
Page/ Model-No. Drilling with drills up to 6,5 mm. Drilling with drills up to 10 mm and for countersinking or chamferring.
L1
L2
max.
D1
D2
[g]
160
45
10
132
30
680
220
51
9,1
150
36,5
1.310
51
9,1
150
36,5
1.080
45
10
38
30
600
Maintenance unit G1/4 or G1/8 Adapter with collet Carbide countersinks Pneumatic accessories
650 780
Series 15SF2...
Internal thread
DE-STA-CO
13
Accessories
Air hoses
Model-no. 45-0948-S
Model-no. 45-0948-S 45-1307-S 45-1408-S 45-1409-S 45-1508-S Inner- [mm] 4,5 4,5 6,0 6,0 8,0 Length [m] 1,5 2,1 2,4 2,4 2,4 N 1/8 NPT 1/4 NPT 1/8 NPT 1/4 NPT
Overhoses
Overhose with spring locking-ring Overhose with integrated clamping piece
Model-no. 45-0956-A
Model-no. 45-0956-A*) 45-1901-A*) 45-1902-A* *) Spring locking ring DO-6061 included Length [m] 1,2 1,2 2,2 22 22
KD-1/4
KS-1/4
Collets
Model-no.
148-3 mm 131-2,35 mm 103-1/16 100-1/8
Capacity
3 2,35 1,6 3,17
Series
Series 100
Series 200
14
DE-STA-CO
Accessories
Maintenance units
Maintenance units by WILKERSON consist in a filter, a regulator with gauge and a lubricator. The filters have a high standard filtration of 5 m and the lubricators produce a very fine oil mist (10 m).
Model-no.
Consists in
~B
Dimesions ~H
Ports
C08-C2-FKG0 C16-C3-0001)
F+R+L F+R+L
120 228
152 180
65 75
2 x G 1/4 2 x G 3/8
air-o-lube lubricators
These lubricators could be used where it is inconvenient for a standard maintenance unit. These lubricator contains no filter or regulator. Please mention that these lubricators only work when the grinder is started. So these lubricators are not applicable for continuous work.
94 Model-no. Working pressure min max. [bar] [bar] Usable oil content [cm3] Flow capacity1) [m3/h] Ports Weight w/o oil [g] 46
Application
210-1/4 210-3/8
1)
2 2
10 10
38 38
56 126
G 1/4 G3/8
170 170
Jacob chucks
with key
Model-no. Capacity [mm] D L ~ max. [mm] [mm] Key Model-no.
Keyless chucks
Model-no. Capacity [mm] D ~ [mm] L max. [mm] D
L max.
Jacobs chuck
L max. DO-1075 14-1485 14-1489 0-4 0-6,5 1-10 26 30 36,5 39 50 64 DO-620 DO-621 14-2169 DO-01633 DO-01634 0-6,5 0,5-10 35 37 69 85 D 3/8 -24 UNF
Keyless chuck
Grease gun Model-no. 45-1982 Grease for angular gears model-no. 45-0980 Grease for planetary gears model-no. 45-0983
DE-STA-CO
15
Accessories
Router attachment for grinders 12S20 and 12S25 (Page 6 and 7).
Guiding disc
Template Workpiece
Complete router for fiberglass routing consists in pneumatic grinder, router attachment, guiding disc and special carbide bur.
Fiberglass routers could be compiled out of straight grinders, router attachments and special carbide burs. The routers are used with the guiding discs and customer built templates.
The special fiberglass burs (page 26) must have the same shaft diameter like the bearing inside the router attachement which will guide the bur. Because the routing depth is adjustable these router attachements could be used for contour routing and for flute routing.
Additional collet
Recommended fibreglass bur with drill point Model-no. 191-1318-50 190-6555-40 Shaft- 6,0 6,35
Model-no. 208-1/4
D 25,4 38
16
DE-STA-CO
Accessories
Rivet trimmer attachment for angular grinders 12S12 (Page 10 and 11).
This rivet trimmer attachment is very small and compact (height only appr. 65 mm). In addition with the recommended grinders and burs this trimmer allows to trim pop or blind rivets and also weld seams without damaging the nearby surface of the workpiece. The trimmer has two runner pads and a micrometer control for the height of cut (setting accuracy 0,025 mm).
Trimmer attachment 14-1723 with special bur 14-1732 and grinder 12S1280-36
14-1723
308-1/4
14-1732
Chamfering attachment for grinders 12S20 and 12S25, pages 6 and 7).
This attachment gives the possibility to chamfer straight and curved rims. The attachment is guided horizontally by an plastic disc - vertically by a bearing which is mounted on the special bur. The recommended bur allows to chamfer 45 and the chamfering depth could be adjusted. This attachment is used for working on plastics, wood and non-ferrous metals.
Attachment 14-2300 with special bur 14-2446 and grinder series 12S20 or 12S25
DE-STA-CO
17
Accessories
Adapter with collet the space-saving compact combination for angular grinder series 12S12..-32 (pages 10 and 11) and drills
series 15SF2 (pages 12 and 13).
Adapter Model-no. 14-1104-6 14-1102-3 Applications
Angular grinder series 12S12..-32 (pages 10, 11) Angular grinder series 12S12..-32 (pages 10, 11) Angular drills series 15SF2 (pages 12, 13)
52
52
Adapter 14-1104-6
Drills
Mastab 1 : 1
Adapter with collet (capacity D)
Recommended wrenches
D 3 6
H 15,5 16,5
Adapter
the space-saving compact combination for angular grinder series 12S12..-32 (pages 10 and 11) and sanding disc holders 14-1112-6 and 14-1113-6.
Applications
Angular grinder series 12S12..-32 (pages 10, 11) Adapter 14-1144 Disc holder 14-1112-6 or 14-1113-6 Sanding disc 14-1113K...
Shaft unscrewable Sanding disc holder with shaft Model-no. 14-1112-6 or 14-1113-6
d 6 6
D 47 70
L 49 49
L1 15 17
Applications
Sanding discs, self-adhesive
Model-no. D1=75 (K=grain size) Model-no. D1=75 (K=grain size)
14-1113K800 14-1113K120
Angular grinder series 12S12-36 with disc holder and sanding disc.
Angular grinder series 12S12-32 direct connected to the disc holder by adapter 14-144
Disc holder
This disc holder is designed for the use of armed grinding discs (adapter- 22,2 mm) The pad contour develops draft action to cool the disc and avoids excessive pickup. Nut and wrench to be ordered separately.
Nut Wrench Disc holder
14-2255
18
DE-STA-CO
Accessories
Carbide countersinks
These two countersinks with 90 included angle could be directly mounted via a 1/4-28UNF thread into the head of the angular drill 15SF287-72 (pages 12, 13). Wrench 14-08229 has to be ordered separately.
Model-no. X053-0144-0
Application: Weak materials and plastics
Model-no. X053-0145-0
Application: high-strength materials and steel
Belt sander combination out of angular grinder and belt sander attachments
It is possible to use belt sander attachments on the angular grinder series 12S12. So it is not only possible to use this grinders with burs or sanding discs but also as a compact and handy belt sander system. The sanders attachment has a 180 pivoting arm for more flexibility and user comfort. The sanding belts are pre-stressed by a guiding roll and could be used on metals, woods or fiberglass. One side of the belt sanders arm is out of steel and the other side is covered by Tefloncoated rubber foam.
GF = rubber coating of the guide roll GA = rubber coating of the drive roll TS = Teflon-coated foam rubber plate
60 80 120
Applications
Belt sander attachment 14-1301 at a angular grinder 12S1280-32. The attachment is pivoted 30 down.
DE-STA-CO
19