Professional Documents
Culture Documents
Page 1 of 10
adejjw00000675
Terminal 1A
Signal
Connected to
Inspection item (s) Windshield wiper motor Related wiring harness Windshield wiper motor Related wiring harness R.DEF 20A fuse Related wiring harness Windshield wiper motor Related wiring harness TAIL 15A fuse Related wiring harness Windshield wiper motor Related wiring harness
1B
1C
R.DEF 20 A fuse
1D
Ignition switch is off. Under any condition Windshield wiper operating Windshield wiper not operating
1E
TAIL 15 A fuse
1F
B+ 1.0 or less
http://esi.mazda.co.jp/esicont/au_eng/mazda2/20070628144957/html/id094000800300.... 03-Oct-13
Page 2 of 10
Terminal 1G
Inspection item (s) Parking light Related wiring harness Washer motor Related wiring harness
1H
Washer motor
Ignition switch at ON
Rear washer motor not operating Windshield washer motor operating Windshield washer motor not operating
B+
1I
Washer motor
Ignition switch at ON
1.0 or less
1J
1K
Front turn light (RH) not illuminated Turn switch (LH) on 1L Front turn light (LH) control Interior light power supply Front turn light (LH) Front side turn light (LH) ROOM 15 A fuse Under any condition Hazard warning switch on Front turn light (LH) flashes
HAZARD 10A fuse Related wiring harness Front turn light Alternates (RH) between 1.0 or Front side turn light less and B+ (RH) Related wiring 1.0 or less harness Front turn light (LH) Alternates between 1.0 or Front side turn light less and B+ (LH) Related wiring 1.0 or less harness B+ B+ ROOM 15 A fuse Related wiring harness D/L 20 A fuse Related wiring harness F.WIP 20A fuse Ignition switch Related wiring harness METER 10A fuse Ignition switch Related wiring harness Wiper and washer switch Related wiring harness Wiper and washer switch Related wiring harness Related wiring harness R.WIP 10 A fuse Ignition switch Related wiring harness ILLUMI 7.5 A fuse Illumination light Related wiring harness
1P 2A 2B 2C 2D 2E 2F
Door lock power supply D/L 20 A fuse Windshield wiper power supply (IG 2) Meter power supply (IG 1) F.WIP 20 A fuse Ignition switch METER 10 A fuse Ignition switch
Under any condition Ignition switch at ON Ignition switch at off. Ignition switch at ON Ignition switch is off. Windshield washer switch on Windshield washer switch off
2G
2H
Ignition switch at ON
B+
2I 2J 2K
1.0 or less
2L
Ignition switch at ON
2M
Signal ground Rear window wiper power supply (IG 2) Illumination output Power ground
Body ground R.WIP 10 A fuse Ignition switch ILLUMI 7.5 A fuse Illumination light Body ground
Under any condition Ignition switch at ON Ignition switch at off. TNS ON TNS OFF Under any condition
2N
2O 2P
http://esi.mazda.co.jp/esicont/au_eng/mazda2/20070628144957/html/id094000800300.... 03-Oct-13
Page 3 of 10
Terminal
Signal
Connected to
Measurement condition
Voltage (V)
Inspection item (s) Related wiring harness Liftgate latch and lock actuator Related wiring harness Filament Related wiring harness Liftgate latch and lock actuator Related wiring harness Rear wiper motor Related wiring harness Door lock actuator Related wiring harness Rear motor Related wiring harness
3A*7
Under any condition Rear window defroster on Rear window defroster off
1.0 or less
3B
B+ 1.0 or less B+ 1.0 or less B+ 1.0 or less 1.0 or less B+ 1.0 or less 1.0 or less
Filament
Ignition switch at ON
3C
Liftgate opener actuator power supply Rear window wiper power supply
Liftgate opener actuator switch pressed, lock release operation Other Ignition switch at ON
3D
3E
*6
3F
Ignition switch at ON
3G 3H
Any door is open Interior light at DOOR position Within 5 seconds after all doors closed Five seconds after all doors closed Turn switch (RH) on 3J Rear turn light (RH) control Rear turn light (LH) control Rear turn light (RH) Hazard warning switch on Turn switch (LH) on 3L Rear turn light (LH) Hazard warning switch on Rear turn light (LH) flashes Rear turn light (RH) flashes
3I
Interior light
B+ Alternates between 1.0 or Rear turn light (RH) less and B+ Related wiring harness 1.0 or less
Rear turn light (LH) not illuminated Door lock actuator locking (without double locking system) 3M Door lock control Door lock actuator Door lock actuator locking (with double locking system) Other 3N 3O Door unlock control Door lock actuator Door lock actuator unlocking Other
Alternates between 1.0 or Rear turn light (LH) less and B+ Related wiring harness 1.0 or less B+ 1.0 or less 1.0 or less B+ 1.0 or less Door lock actuator Related wiring harness Climate control unit Instrument cluster Audio unit Keyless receiver Steering lock unit Theft-deterrent control module Related wiring harness Brake fluid level sensor Related wiring harness Oil pressure switch Related wiring harness Door lock actuator Related wiring harness
3P
Power supply
Climate control unit Instrument cluster Audio unit Keyless receiver Steering lock unit Theft-deterrent control module
B+
4A
Brake fluid level less than MIN Brake fluid level above MIN.
4B*4
Engine running Oil pressure switch Back-up light switch Engine not running Shift lever is in R position
http://esi.mazda.co.jp/esicont/au_eng/mazda2/20070628144957/html/id094000800300.... 03-Oct-13
Page 4 of 10
Terminal 4C*3 4D
Signal
Connected to
Inspection item (s) Back-up light switch Related wiring harness Rear fog light relay Related wiring harness Headlight low relay Related wiring harness Front fog light relay Related wiring harness Headlight relay (LO) Related wiring harness Headlight relay (HI) Related wiring harness
Rear fog light switch ON Rear fog light switch OFF Headlights on
4E
Headlight ON
4F 4G 4H
Headlights off Headlights on or TNS ON Headlights on Front fog light switch ON Front fog light switch OFF
4I
4J 4K 4L 4M 4N 4O 4P 4Q 4R 4S 4T
Headlight relay (LO) Headlight relay (HI) PCM ABS HU/CM (with ABS) DSC HU/CM (with DSC) TCM PCM ABS HU/CM (with ABS) DSC HU/CM (with DSC) TCM
1.0 or less B+
4U
CAN_H
Terminal used for communication therefore determination based on terminal voltage inspection not possible. Terminal used for communication therefore determination based on terminal voltage inspection not possible. Terminal used for communication therefore determination based on terminal voltage inspection not possible. Terminal used for communication therefore determination based on terminal voltage inspection not possible. Turn switch at RH position 1.0 or less Turn switch Wave pattern Related wiring (See Pattern harness 1.) 1.0 or less Turn switch Wave pattern Related wiring (See Pattern harness 1.) 1.0 or less Wiper and washer Wave pattern switch (See Pattern Related wiring harness 1.) Climate control unit (rear window Wave pattern defroster switch) (See Pattern Related wiring 1.) harness Light switch 1.0 or less Related wiring B+ harness Wiper and washer 1.0 or less switch Related wiring B+ harness 1.0 or less
4V*8
CAN_H
4W
CAN_L
4X*8
CAN_L
6A
Turn switch
6B
Turn switch
6C
6D
6E
Light switch not at ON position Wiper switch in HI position Wiper switch not at HI position
6F
http://esi.mazda.co.jp/esicont/au_eng/mazda2/20070628144957/html/id094000800300.... 03-Oct-13
Page 5 of 10
Terminal
Signal
Connected to
6G
Measurement condition Rear window defroster indicator illuminated Ignition switch at ON Rear window defroster indicator turned off Under any condition HI beam at passing position or lights on status Except above TNS ON
B+
Climate control unit (rear window defroster indicator) Related wiring harness
6H
1.0 or less
Wiper and washer switch Related wiring harness Light switch Related wiring harness Light switch Related wiring harness Light switch Related wiring harness
6I
Light switch
6J
TNS switch signal Headlight switch input (front fog light) Headlight switch input (vehicles with auto light/wiper system) Headlight switch input (rear fog light)
Light switch
6K
Light switch
Front fog light switch in off position Light switch in AUTO position
6L
Light switch
Light switch not at AUTO position Rear fog light switch in on position
6M
Light switch
Rear fog light switch in off position Windshield wiper LO operation Windshield wiper not operation
Light switch Wave pattern Related wiring (See Pattern harness 1.) Light switch 1.0 or less Related wiring B+ harness 1.0 or less B+ 1.0 or less B+ 0.72 0.48 0.32 0.18 0.08 0 1.0 or less Wave pattern (See Pattern 6.) B+ 1.0 or less Hazard warning switch Related wiring harness Steering lock unit (Advanced keyless and start system) Key reminder switch (Keyless entry system) Related wiring harness Wiper and washer switch Related wiring harness Wiper and washer switch Related wiring harness Light switch Related wiring harness
6N
Ignition switch at ON
6O
Light switch
Light switch at headlight position and low beam Light switch at OFF or TNS position Switch position 1 position Switch position 2 position
6P
Voltage decreases when speed control volume is turned from position to + position
Switch position 3 position Switch position 4 position Switch position 5 position Switch position 6 position
6Q
Hazard warning switch on Hazard warning switch Hazard warning switch signal Hazard warning switch off Key inserted Steering lock unit (Advanced keyless and start system) Key reminder switch Key removed (Keyless entry system) Wiper switch in AUTO position (vehicles with auto light/wiper system) Wiper switch in INT position (vehicles without auto light/wiper system) Except above
6R
6S
Wiper and washer switch Related wiring Wave pattern harness (See Pattern 1.) Liftgate opener switch Related wiring harness
1.0 or less
6T 6U*2
Liftgate opener switch CAN system related module (L.H.D.) Keyless control module (R.H.D.)
Wave pattern (See Liftgate Opener Switch Input Signal Pulse (Reference) .)
6V
CAN_L
Terminal used for communication therefore determination based on terminal voltage inspection not possible.
http://esi.mazda.co.jp/esicont/au_eng/mazda2/20070628144957/html/id094000800300.... 03-Oct-13
Page 6 of 10
Connected to Measurement condition Voltage (V) Inspection item (s) Keyless control Terminal used for communication therefore determination based on terminal module (with advanced voltage inspection not possible. keyless and start system) Keyless receiver (vehicles with keyless entry system) CAN system related module (L.H.D.) Keyless control module (R.H.D.) Terminal used for communication therefore determination based on terminal voltage inspection not possible. Liftgate opener switch not pressed 1.0 or less Liftgate opener Wave pattern*2 switch (See Pattern Related wiring 2.) harness approx. 3*1 1.0 or less Wave pattern (See Pattern 3.) Wave pattern (See Pattern 4.) 1.0 or less Wave pattern (See Pattern 5.) 1.0 or less B+ Rear door (LH) open Rear door (LH) closed Parking brake switch Related wiring harness
6X
CAN_H
7A
Parking brake applied 7B Parking brake switch signal Parking brake switch Parking brake not applied Driver's door key cylinder rotated to lock direction 7C Key cylinder switch signal Door key cylinder switch Driver's door key cylinder rotated to unlock direction Drivers door key cylinder at neutral position after rotating in lock or unlock direction 7D 7E 7F All outer door handles Rear door latch switch (LH) Power window main switch Rear door latch switch (LH) Any door open All doors closed
7G*5
Wave pattern Rear door latch (See Pattern switch (LH) 6.) Related wiring harness 1.0 or less Wave pattern Front door latch (See Pattern switch (driver side) 6.) Related wiring harness 1.0 or less Wave pattern (See Pattern Door lock-link 6.) switch Wave pattern Related wiring (See Pattern harness 7.) Wave pattern Front door latch (See Pattern switch (passenger side) 6.) Related wiring 1.0 or less harness Wave pattern Rear door latch (See Pattern switch (RH) 6.) Related wiring harness 1.0 or less Wave pattern Door lock-link (See Pattern switch 6.) Related wiring harness 1.0 or less 1.0 or less B+ Liftgate switch Related wiring harness
7H
7I
Front door latch switch Front door latch switch Front door (driver side) open (driver side) (driver side) Front door (driver side) closed Driver's door locked
7J
7K
7L
7M
Front door latch switch Front door latch switch Front door (passenger side) open (passenger side) (passenger side) Front door (passenger side) closed Rear door latch switch (RH) Rear door latch switch (RH) Driver's door locked Driver's door unlocked Rear door (RH) open Rear door (RH) closed
7N
7O
*5
7P
7Q
Unlock input (door lockDoor lock-link switch link switch) Liftgate switch signal
7R 7S 7T
Liftgate opened
Liftgate switch
Liftgate closed
http://esi.mazda.co.jp/esicont/au_eng/mazda2/20070628144957/html/id094000800300.... 03-Oct-13
Page 7 of 10
Connected to Rain sensor CAN system related module DLC-2 Rain sensor CAN system related module DLC-2
Measurement condition Voltage (V) Inspection item (s) Terminal used for communication therefore determination based on terminal voltage inspection not possible. Terminal used for communication therefore determination based on terminal voltage inspection not possible. Wipers moving Ignition switch at ON Wipers not moving B+ 1.0 or less Rain sensor Related wiring harness
7V
CAN_L
7W
7X
CAN_H
Terminal used for communication therefore determination based on terminal voltage inspection not possible.
*1 *2 *3 *4 *5 *6 *7 *8
:Vehicles with advanced keyless and start system :Vehicles without advanced keyless and start system :MZ-CD 1.4 DI Turbo, MZ-CD 1.6 (Y6) :Except MZ-CD 1.4 DI Turbo, MZ-CD 1.6 (Y6) :5HB :With double locking system :With terminal 3A :CVT
Pattern 1
adejjw00005004
Terminal: Turn switch input (RH): 6A (+) body ground (-) Turn switch input (LH): 6B (+) body ground (-) Rear wiper switch input (ON): 6C (+) body ground (-) Rear defroster switch input: 6D (+) body ground (-) Headlight switch input: 6L (+) body ground (-) Windshield wiper switch input: 6S (+) body ground (-)
Pattern 2
am2zzw00004145
Terminal: 7A (+) body ground (-) Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range
http://esi.mazda.co.jp/esicont/au_eng/mazda2/20070628144957/html/id094000800300.... 03-Oct-13
Page 8 of 10
Pattern 3
am2zzw00004146
Terminal: 7B (+) body ground (-) Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range
Pattern 4
am2zzw00004147
Terminal: 7C (+) body ground (-) Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range
Pattern 5
am2zzw00004148
Terminal: 7C (+) body ground (-) Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range
Pattern 6 Note
For vehicles with the theft-deterrent system, the wave pattern output by the theft-deterrent control module and the BCM appears overlapped because they are wired together. The wave pattern in the figure indicates the BCM output wave pattern. For wave patterns not in the figure, refer to the theft-deterrent control module inspection. (See THEFT-DETERRENT CONTROL MODULE INSPECTION.)
http://esi.mazda.co.jp/esicont/au_eng/mazda2/20070628144957/html/id094000800300.... 03-Oct-13
Page 9 of 10
am2zzw00004149
Terminal: Hazard warning switch signal: 6Q (+) body ground (-) Rear door latch switch (LH): 7G (+) body ground (-) Front door latch switch (driver side): 7I (+) body ground (-) Lock input (door lock-link switch) (vehicles without advanced keyless and start system): 7K (+) body ground (-) Front door latch switch (passenger side): 7M (+) body ground (-) Rear door latch switch (RH): 7O (+) body ground (-) Unlock input (door lock-link switch): 7Q (+) body ground (-)
Pattern 7 Note
The output signals from BCM terminal 7K and keyless control module terminal 3P are displayed simultaneously and the wave patterns may overlap each other.
am2zzw00004150
Terminal: 7K (+) body ground (-) Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range
adejjw00005004
Terminal: 6U (+) body ground (-) Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range Measurement condition: Liftgate opener switch not pressed
http://esi.mazda.co.jp/esicont/au_eng/mazda2/20070628144957/html/id094000800300.... 03-Oct-13
Page 10 of 10
adejjw00005005
Terminal: 6U (+) body ground (-) Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range Measurement condition: Liftgate opener switch pressed
adejjw00005005
Terminal: 7A (+) body ground (-) Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range Measurement condition: Liftgate opener switch pressed
http://esi.mazda.co.jp/esicont/au_eng/mazda2/20070628144957/html/id094000800300.... 03-Oct-13