Professional Documents
Culture Documents
Release Notes
Contents
1
TEKLA STRUCTURES 15
TEKLA STRUCTURES 15
12
12
12
12
13
13
13
13
13
13
13
13
14
14
14
14
14
14
15
15
15
15
15
15
15
15
16
16
16
16
16
16
16
16
17
17
17
17
17
17
17
17
TEKLA STRUCTURES 15
TEKLA STRUCTURES 15
This document explains new features, fixes and improvements in Tekla Structures 16.0 Service
Release 1. We recommend this service release for all Tekla Structures 16.0 users.
The number after the description of the fix (for example TT12345) is the development item
number of that particular fix. Your local Tekla office may have referred to this number when
you have for example submitted a maintenance request.
General
Multi-user mode
When saving the model in the multi-user mode, the Crossing selection is inactive
message is no longer shown on top of the Database stored message.
TT54470
Modeling
Surface treatment
If a surface treatment has been copied or moved to another object, the deletion of the
original object part does not delete the moved/copied surface treatment(s).
TT53680
Reinforcing bars
The end hook of a reinforcing bar is now correct independently of hook bending radius and
reinforcing bending radius values.
TT53141
Reference models
The change visualization of large subdivided reference models is now considerably faster
than before.
TT54762
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
Splitting objects
If there were both lines and circles, and 3D solids in the model, splitting objects did not
function. This has now been fixed.
TT54933
Cuts in solid parts sometimes failed, especially if the cut did not extend very far outside the
part face to be cut. Now the cuts in solid parts are created more robustly and there are
fewer failures.
TT54335
Assembly properties
Previously, it was possible to modify the assembly name, start number and prefix in the
Construction Management configuration. This has been changed so that modifying these
properties is not possible in the Construction Management configuration anymore.
TT54285
Previously, filtering by object types and logical areas did not work if objects were
organized as assemblies in Model Organizer. This has now been fixed.
TT54155
Profile Catalog
TT54185
Model Organizer
Model objects that have been deleted from the model are now removed from the Model
Organizer when you manually refresh the Model Organizer view.
TT53395
It is not possible to delete model objects in the Model Organizer. You can, however,
remove objects from a selected category in the Model Organizer.
TT53673
When you changed to another model, sometimes there was an error in the Model
Organizer and you had to restart Tekla Structures to open the object pane. This has now
been fixed.
TT54197
Drawings
Dimensions
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
Views
View frame of the enlarged views in anchor bolt plans was too small in some cases. This
has now been fixed.
TT53615
Sometimes after drawing update, the section symbols were moved out of the view, the
view frames were enlarged and views were placed incorrectly. This has now been fixed.
TT53299
Sometimes section marks and view labels changed unnecessarily in multidrawings. This
has now been fixed.
TT54232
Dragging
Sometimes the section views were not combined or were combined incorrectly if the
advanced option XS_DRAWING_CUT_VIEW_COMPARISON_CRITERIA was used. This has
now been fixed.
TT53738
Filtering
The Save and Save as buttons are now working correctly and the related boxes show the
correct settings in filtering dialog boxes in drawings.
TT53781, TT54014
Filtering categories Task, Template and Logical area are now available also in drawing
filters.
TT54435
If an existing cast unit drawing sheet number is set to zero, the drawing marks are modified
so that the sheet number is not included. This is similar as when the drawing is created
with sheet number zero from the beginning.
TT54021
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
Select objects in the Drawing List now works correctly and shows the related parts also
when the sheet number is set to 0 for cast unit drawings.
TT53659
When you pressed the Modify button in the Object level settings dialog box, also the
settings from the drawing properties dialog box and its sub-dialog boxes were applied.
This has now been fixed.
TT54005
When you pressed the Save button in the Object level settings dialog box, the settings
were saved in the file the name of which you had entered in the Save as box. This has now
been fixed.
TT53766
The new detailed object level settings work also when drawings are created using the old
AutoDrawings wizard file type of rule sets.
TT54469
The drawing object level setting groups are no longer displayed in the Object level
settings dialog box, if the classifier files have been deleted from the model folder.
TT53791
The weld line type is now taken into account when drawing new welds.
TT53876
The quantity of the included single-part drawings is now ignored. For example, if you
have a plate p8 in many different assemblies, and you add another p8 in the model,
and the p8 has not changed after numbering, the assembly drawing can be opened
without numbering.
The Select objects button in the Drawing List now selects the assembly parts as
before.
TT54468
Mini Toolbar
When you tried to remove a fill from a circle using the Mini Toolbar, Mini Toolbar was
not working properly and gave an error message. This has now been fixed.
TT54618
10
The Draw protect command can again be added in a toolbar in the Customize dialog box.
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
TT53283
Use the new advanced option XS_HATCH_SPECIAL_COLOR_ACI to set the autocad color
index for the Special color in hatches in drawing export. The default values is 120.
TT53925
Level attributes
When creating reports, the GetFieldFormula rule did not function correctly in some
situations. This has now been fixed.
TT53833
Subassemblies are now calculated correctly in cast unit center of gravity template fields
(COG_X, COG_Y, COG_Z).
TT54143
Template Editor
In some rare cases, adding an image caused an application error, especially if the file path
to the image file was very long. This has now been fixed.
TT54514
It is now possible to select the position number type to be exported: cast unit number or
assigned control number (ACN). This setting only affects the pieces and plotter data of the
export file.
TT53700
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
11
NC files
In the NC files, the number of parts was incorrect when a hard stamp was used in the NC
file containing also part position information.
TT54673
In NC files, round contour plates with round part cut produced incorrect results. This has
now been fixed.
TT50500
Task Manager
Task dependencies
Task dependencies are now checked when task duration is changed as a result of
production rate calculation.
TT53760
You can now select in which direction a dependent task is moved when the preceding task
is moved.
TT53947
Previously, task dates and dependencies were not correctly exported from Task Manager
to MS Project if you had made changes in the tasks and not saved the task list. This has
now been fixed so that saving is not needed before exporting.
TT54251
Importing from Task Manager to Primavera P6 did not function correctly. This has now
been fixed.
TT54534
Non-working days
The following improvements have been made in the Non-working days dialog box:
Now it is easier to define weekly recurring events for one non-working days.
TT54104
12
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
Viewing selections
Now Task Manager remembers all selections that you make in the View menu. When you
open the Task Manager the next time, the selections you made in the View menu in the
previous Task Manager session are used. However, if you position toolbars right after each
other, they may be misplaced, so we recommend that you do not position the toolbars
right after each other.
TT53942
In tasks that did not have any objects linked to them, there was an error when you clicked
the column headings on the Manage Dates of Individual Objects tab in the Task
Information dialog box. This has now been fixed.
TT53828
Previously, sometimes when you modified the dates of a task in the Task Information
dialog box and clicked Modify, the changes were not shown on the Manage Dates of
Individual Objects tab. This has now been fixed.
TT53945
Task duration
Modifying the planned duration of a summary task from the task list is now disabled.
TT54271
When you assigned a task type to a summary task, the duration of the task did not match
the length of its subtasks. This has now been fixed.
TT54826
The quantitiy for production rate was different for parts and assemblies. This has now been
fixed.
TT54443
User-defined attributes
The names of user-defined attrributes are now presented correctly in the Task Types
dialog box.
TT54722
Custom components
Custom component browser
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
13
Connections
JP Floor beam gusset (11)
There is now a cut in the upper side corner of the gusset to show which is the upper side of
the gusset.
TT51025
Two closed beams were regarded as a twin profile beam in the JP Floor beam gusset (11)
connection. This has now been fixed.
TT51024
Welded parts, for example stiffeners, were sometimes incorrectly regarded as the main part
flange plate of a built-up beam. This caused gusset plates to have incorrect shapes. This
has now been fixed.
TT51023
The analysis profile length did not work correctly for the main part. This has now been
fixed.
TT52745
The gap between the secondary beam web and the double shear plates is now created.
TT54539
14
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
TT54730
Modeling tools
Ship Ladder (1)
The weld created is now always an on site weld. The shop/site weld selection has been
removed from the Welds tab.
TT53058
Cold rolled
Albion SIGMA profiles
The default bolt sizes are now correct: M12 for CW and ZED sections, and M16 for Zeta
and Zeta2.
TT36446
Web bolts did not go through the eaves beam in a face fix condition. This has now been
fixed.
TT36441
The default bolt size for the component is now M16 4.6XOX.
TT40146
The component now allows slotted holes to be defined within the connection.
TT52126
Non-standard eaves beams did not have the correct Arrangement and Position in the D3
(CAM) file. This has now been fixed.
TT38975
TT53560
Box Bolt diameter is now shown in the table on the Parameters tab.
TT54038
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
15
Bolts used within the Beam Clamp components will not appear in the standard bolt reports
Bolt_Site_Summary and Bolt_Site_location.
TT54064
Side rail struts now use 12 mm bolts with 14 mm holes in the cleat and 14 mm square holes
in the rail.
TT46973
When the Autoform bolt backmark is below the specified minimum it gives a red cone, but
only when it is to the web of the section. If it is below the specified minimum to the end of
the Autoform, it leaves a green cone, but fails the file transfer.
TT45627
When deleting an Autoform connection from a beam it would remove the connection, but
would leave the Autoform data on the beam. This has now been fixed, removing the
Autoform connection also removes the Autoform data.
TT52090
When using CSK holes, the actual depth of the CSK is 5 mm from the inside face of the
section, was previously using 5 mm from the outside face of the section.
TT38920
UltraZED Eaves Brace no longer puts a packer plate on when using CSK bolts.
TT44157
When fixing to 2 eaves beams with standard UltraZED cleats, if the setting Number of
Profiles is Double, then entire connection and bolts would be doubled. This has now been
fixed.
TT54273
Minimum bolt grade for UltraZED sections is 8.8, if no bolt grade was specified it would
previously use 4.6, it now uses 8.8.
TT54195
16
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
When connecting to two secondary members, getting the correct cleats would depend on
the picking order of the secondary members. Now Tekla Structures uses the correct cleats
using any picking order of the secondary members.
TT50301
In some rare cases, the total load and applied load differed for area loads, and a warning
was displayed. This has now been fixed.
TT49859
In some rare cases, incorrect loading was created for single spanning loads. This has now
been fixed.
TT53288
The longitudinal member offset as defined in the analysis properties of a connection was
not taken into account when creating an analysis model in which Member end release
method by connection was enabled. This has now been fixed.
TT53087
Analysis nodes
Sometimes, split nodes inserted by users did not function correctly in analysis model
updates. This has now been fixed.
TT54298
TT54280
Nodal loads
In some rare cases, nodal load was applied to a node which did not exist in the model. This
has now been fixed.
TT53113
Snapping
Snapping to an analysis bar or analysis area edge did not work even if the Snap to lines
and edges switch was selected. This has now been fixed. Also, snapping to a node now
works if the Snap to geometry lines / points switch is selected.
TT54314
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes
17
TT53583
18
TEKLA STRUCTURES 15
Tekla Structures 16.0 SR1 Release Notes