You are on page 1of 48

Inverter Single

Wall Mounted
(60Hz/R410A)
6RMI0-02A

Inverter Single-60Hz
(R410A)
1. Models line up.........................................................................................5
2. Specifications .........................................................................................8
3. Dimensional drawings .........................................................................10
4. Wiring diagrams ...................................................................................18
5. Refrigerant cycle diagram ...................................................................23
6. Capacity tables .....................................................................................27
7. Capacity coefficient factor...................................................................32
8. Operation range....................................................................................35
9. Air flow and temperature distributions(reference data)....................36
10. Sound level .........................................................................................38
11. Remote controller ...............................................................................41
12. Installation...........................................................................................44

Inverter Single

6RMI0-02A

Publication history

Plb.No

Outdoor Units

Notes

Publication in

6RMI0-02A

All models

Added New models

July.2010

Inverter Single

6RMI0-02A

Test condition of international standard


CLASSIFICATION

Indoor
Cooling
Capacity

Outdoor

Indoor
Heating
Capacity

Maximum

Outdoor

Indoor

Cooling
Operating

Outdoor

Maximum

Indoor

Heating
Operating
Enclosure

Outdoor

Indoor

Sweat /
Condensate

Outdoor

Disposal
Freeze-up/

Indoor

Low
Temperature Outdoor

KSC
9306

ISO
5151

ARI
210/240

AHAM

AS
1861.1

SSA
385

DBC(F)

27.0

27.0

26.7(80)

26.7(80)

27.0

29.0

WBC(F)

19.5

19.0

19.4(67)

19.4(67)

19.0

19.0

DBC(F)

35.0

35.0

35.0(95)

35.0(95)

35.0

46.0

WBC(F)

24.0

24.0

23.9(75)

23.9(75)

24.0

24.0

DBC(F)

20.0

20.0

21.1(70)

21.1(70)

21.0

21.0

WBC(F)

15.0

15.0

15.6(60)

15.6(60)

15.0

15.5

DBC(F)

7.0

7.0

8.3(47)

8.3(47)

7.0

7.0

WBC(F)

6.0

6.0

6.1(43)

6.1(43)

6.0

6.0

DBC(F)

32.0

32.0

26.7(80)

32.2(90)

32.0

29.0

WBC(F)

23.0

23.0

19.4(67)

22.8(73)

23.0

19.0

DBC(F)

43.0

43.0

46.1(115)

43.3(110)

43.0

54.0

WBC(F)

26.0

26.0

23.9(75)

25.6(78)

26.0

24.0

DBC(F)

27.0

27.0

26.7(80)

26.7(80)

WBC(F)

19.0

19.0

19.4(67)

22.8(73)

DBC(F)

21.0

24.0

23.9(75)

23.9(75)

WBC(F)

15.0

18.0

18.3(65)

18.3(65)

DBC(F)

27.0

27.0

26.7(80)

26.7(80)

27.0

27.0

WBC(F)

24.0

24.0

23.9(75)

23.9(75)

24.0

24.0

DBC(F)

27.0

27.0

26.7(80)

26.7(80)

27.0

27.0

WBC(F)

24.0

24.0

23.9(75)

23.9(75)

24.0

24.0

DBC(F)

21.0

21.0

19.4(67)

21.1(70)

21.0

21.0

WBC(F)

15.0

15.0

13.9(57)

15.6(60)

16.0

16.0

DBC(F)

21.0

21.0

19.4(67)

21.1(70)

21.0

21.0

WBC(F)

15.0

15.0

13.9(57)

15.6(60)

16.0

16.0

KS : Korea Standard
ISO : International Standard Organization
ARI : Airconditioning and Refrigeration Institute
AHAM : Association of Home Appliance Manufacturers

AS : Australia Standard
SSA : Saudi Arabian Standard

Inverter Single

6RMI0-02A

General Description
Split type of Air conditioners are known by the category name of Wall Mounted Type of units.These units can
be easily installed in a small space and have exceptional Cooling capacity.Designed for Low-noise operation,it
ensures a pleasant air conditioned environment.
LG Offers various types of units to its customers to suit for the best application and requirement.The following
are the important categories offered by LG :
1) General Wall Mounted Type Units : Units with Simplicity in design.
2) Art Cool Units : A new concept of cooling introduced by LG in the field of Air Conditioning.
3) Inverter Units : These units are capable of minimising the Power consumption with the unique inverter
technology.
Some of the Important Features of these units are listed below :
1) Providing Health to the Customers : By having Filters such as Plasma Filter which is capable of removing the
Micro Organisms up to 0.1 microns.
2) Long Term Money Saving : By providing the Features such as Gold Fin, Auto Clean etc. to maintain the
same performance for years.
3) Best Comfort : With Features such as Sleep Mode,Timer,Auto Restart etc.
The Units are available with many standard and optional features which give our Customers the choice to
select the unit of their own desire.For details refer to the detailed specification followed after this description.

LG Electronics Inc.
Air Conditioning Company

Inverter Single

6RMI0-02A

Models line up

1. Models Line up
1.1 Indoor Unit
Indoor Unit

Type

Capacity
[kW(kBtu/h)]

Model name

2.63(9)

ASNQ093B1U0 (VA093CL.NB0)

3.51(12)

ASNQ123B1U0 (VA123CL.NB0)

5.27(18)

ASNQ183C2U0 (VA183CL.NB0)

7.03(24)

ASNQ243C2U0 (VA243CL.NB0)

2.63(9)

ASNW093ERH0

3.51(12)

ASNW123ERH0

5.27(18)

ASNW1838RH0

7.03(24)

ASNW2438RH0

C/O

H/P

Inverter Single

Models line up

6RMI0-02A

1.2 Outdoor Unit


Heat pump
Total capacity index of connectable
indoor units
Power supply

kW
kBtu/h

ASUQ093B1U0 (VA093CL.UB0)

ASUQ123B1U0 (VA123CL.UB0)

2.63
9

3.51
12
220V, 60Hz

Chassis

Heat pump
Total capacity index of connectable
indoor units
Power supply

kW
kBtu/h

ASUQ183C2U0 (VA183CL.UB0)

ASUQ243C2U0 (VA243CL.UB0)

5.27
18

7.03
24
220V, 60Hz

Chassis

Heat pump
Total capacity index of connectable
indoor units
Power supply

kW
kBtu/h

ASUW093ERH0

ASUW123ERH0

2.63
9

3.51
12
220V, 60Hz

Chassis

Inverter Single

6RMI0-02A

Models line up

Heat pump
Total capacity index of connectable
indoor units
Power supply

kW
kBtu/h

ASUW1838RH0

ASUW2438RH0

5.27
18

7.03
24
220V, 60Hz

Chassis

Inverter Single

Specifications

6RMI0-02A

2. Specifications
Libero Inverter (C/O)
Sales Model
Models
Cooling Capacity
Heating Capacity
Power Input
Running Current
Starting Current

Cooling/Heating
Cooling/Heating
Cooling/Heating

EER
SEER
HSPF
Power Supply
Power Factor
Air Flow Rate

Indoor,Max
Outdoor,Max

Moisture Removal
Indoor,H/M/L
Outdoor,Max
Refrigerant & Charge (at 7.5 m)
Additional Refrigerant charge
Type
Model
Motor Type
Compressor
Oil Type
Oil Charge
O.L.P. name
Type
Fan(Indoor)
Motor Output
Type
Fan(Outdoor)
Motor Type
Motor Output
Circuit Breaker*
Power Supply Cable
Power and Transmission Cable No.*mm2
Liquid Side
Piping Connections
Gas Side
Drain Hose(O.D / I.D.)
Sound Level

Indoor (W*H*D)
Dimensions
Outdoor (W*H*D)
Net Weight
Gross Weight
Operation Range

Indoor
Outdoor
Indoor
Outdoor
Cooling(Outdoor)
Heating(Outdoor)

Unit
kW
Btu/h.
kW
Btu/h.
W
A
A
W/W
Btu/h.W

/ V / Hz
%
m3/min(CFM)
m3/min(CFM)
l/h.
dB(A)3
dB(A)3
g(oz)
g/m(oz/ft)

cc

W
A
No.*mm2
No.*mm2
mm(in)
mm(in)
mm(in)
mm
inch
mm
inch
kg(lbs)
kg(lbs)
kg(lbs)
kg(lbs)
C
C
m(ft)
m(ft)
m(ft)

Piping Length (Min/Max)


Chargeless
Max. Elevation Difference
Indoor + Outdoor
Tool Code(Chassis)
Temperature Control
Allergy free filter
Plasma Filter
Prefilter(washable/anti-fungus)
Auto Clean
CHAOS Wind(Auto Wind)
Steps, Fan/Cool/Heat
Airflow Direction Control(up& Down)
Airflow Direction Control(left & right)
Remote Controller Type
Cooling
Setting Temperature
Range
Heating
Functions
Auto Operation (Micom Control)
Auto Changeover (Micom Control)
Self Diagnosis
Timer
Sleep Operation
Soft Dry Operation
Restart Delay(minute)
Deice Control(Defrost)
Hot Start
Jet Cool
Low Ambient Operation
Special Function

VA093CL
AS-Q093B1U0
0.89~2.64~3.70
3,070~9,000~12,620
NA

VA123CL
AS-Q123B1U0
0.89~3.23~4.30
3,070~11,000~14,660
681
840
3.1
4.0
3.1
4.0
4.1
3.85
13.2
13.1
16.4
19.6
1/220/60
1/220/60
94.7
97.1
11.0(388)
11.0(388)
27.0(953)
33(1,165)
1.1
1.3
39 / 33 / 24 / 19
39 / 33 / 24 / 19
47
47
R410A, 900(25.5)
R410A, 950 (33.5)
20(0.22)
20(0.22)
Rotary
Rotary
GA102DBA
GA102DBA
Brushless DC Motor
Brushless DC Motor
PVE(FVC68D)
FVC68D
310
310
Cross Flow Fan
Cross Flow Fan
20
20
Propeller
Propeller
BLDC
BLDC
43
43
15
15
3*1.0
3*1.0
4*1.0 (Including Earth)
4*1.0 (Including Earth)
6.35(1/4)
6.35(1/4)
9.52(3/8)
9.52(3/8)
21.5 / 16.0(0.85 / 0.63)
21.5 / 16.0(0.85 / 0.63)
895*285*195
895*285*195
35.2*11.2*7.7
35.2*11.2*7.7
717*483*230
770*545*245
28.2*19.0*9.1
30.3*21.5*9.6
11(24.5)
11(24.5)
28(61.7)
30(66.1)
13.5(29.7)
13.5(29.7)
30(66.1)
33(72.8)
10~48(50~118.4)
10~48(14~118.4)
7.5(24.6) / 15(49.2)
7.5(24.6) / 15(49.2)
7(23)
7(23)
SB + UA3
SB + UL
Thermistor
Thermistor
O
O
O
O
O
O
O
O
O
O
5/6/5/6/Auto
Auto
Auto
Auto
Wireless LCD(EZ-Remocon) Wireless LCD(EZ-Remocon)
18C ~ 30C
18C ~ 30C
O
O
O
O
24h On/Off
24h, On/Off
O
O
O
O
3
3
O
O
-

Note : O : Applie, X : Not applied, : No relation


Filters are optional in some specific areas.
For Circuit Breaker Rating, please conform to local standards whenever necessary.

Inverter Single

VA183CL
AS-Q183C2U0
0.90~5.28~5.715
3,070~18,000~19,500

1510
6.6
6.6
3.49
11.9
17
1/220/60
99.4
19.5(689)
60(2,119)
1.9
42 / 38 / 34 / 30
53
R410A, 1,350(47.62)
20(0.21)
Twin Rotary
GKT141DAA
Brushless DC Motor
FVC68D
570
Cross Flow Fan
30
Propeller
AC
61/75 (50/60Hz)
20
3*1.5
4*1.5 (Including Earth)
6.35(1/4)
12.70(1/2)
21.5 / 16.0(0.85 / 0.63)
1,030*325*250
40.6*12.8*9.84
870*655*320
34.3*25.79*12.6
17(37.5)
46(101.4)
19(41.9)
53(116.8)
10~48(50~118.4)
5 / 20(65.6)
5~7.5
15(49.2)
SC + UE
Thermistor
O
O
O
O
O
5/6/Auto
Auto
Wireless LCD(EZ-Remocon)
18C ~ 30C
O
O
24h, On/Off
O
O
3
O
-

VA243CL
AS-Q243C2U0
0.88 ~ 7.03 ~ 8.56
3,000~24,000~29,200
2300
10.3
10.3
3.04
10.4
16.3
1/220/60
99.4
21(741)
58(2,048)
2.7
45 / 40 / 35 / 29
53
R410A, 1,800(63.5)
35(0.38)
Twin Rotary
GJT240DAA
Brushless DC Motor
PVE(FVD68C)
900
Cross Flow Fan
76.1
Propeller
AC
150
30
3*2.5
4*2.5 (Including Earth)
9.52(3/8)
15.88(5/8)
21.5 / 16.0(0.85 / 0.63)
1,030*325*250
40.6*12.8*9.84
870*800*320
34.3*31.5*12.6
17(37.5)
60(132.3)
19(41.9)
64(141.1)
10~48(50~118.4)
7.5(24.6) / 30(98.4)
15(49.2)
SC + UE1+
Thermistor
O
O
O
O
O
5/6/Auto
Auto
Wireless LCD(EZ-Remocon)
18C ~ 30C
O
O
24h On/Off
O
O
3
O
-

6RMI0-02A

Specifications

Artcool Inverter
Sales Model
Models
Cooling Capacity
Heating Capacity
Power Input
Running Current
Starting Current

Cooling
Cooling/Heating
Cooling/Heating

EER
SEER
HSPF
Power Supply
Power Factor
Air Flow Rate

Indoor,Max
Outdoor,Max

Moisture Removal
Indoor,H/M/L
Sound Level
Outdoor,Max
Refrigerant & Charge (at 7.5 m)
Additional Refrigerant charge
Type
Model
Motor Type
Compressor
Oil Type
Oil Charge
O.L.P. name
Type
Fan(Indoor)
Motor Output
Type
Fan(Outdoor)
Motor Type
Motor Output
Circuit Breaker*
Power Supply Cable
Power and Transmission Cable No.*mm2
Liquid Side
Piping Connections
Gas Side
Drain Hose(O.D / I.D.)
Indoor (W*H*D)
Dimensions
Outdoor (W*H*D)
Net Weight
Gross Weight
Operation Range

Indoor
Outdoor
Indoor
Outdoor
Cooling(Outdoor)
Heating(Outdoor)

Unit
kW
Btu/h.
kW
Btu/h.
W
A
A
W/W
Btu/h.W

/ V / Hz
%
m3/min(CFM)
m3/min(CFM)
l/h.
dB(A)3
dB(A)3
g(oz)
g/m(oz/ft)

cc

W
A
No.*mm2
No.*mm2
mm(in)
mm(in)
mm(in)
mm
inch
mm
inch
kg(lbs)
kg(lbs)
kg(lbs)
kg(lbs)
C
C
m(ft)
m(ft)

Piping Length (Max)


Max. Elevation Difference
Indoor + Outdoor
Tool Code(Chassis)
Temperature Control
Allergy free filter
Plasma Filter
Prefilter(washable/anti-fungus)
Auto Clean
CHAOS Wind(Auto Wind)
Steps, Fan/Cool/Heat
Airflow Direction Control(up& Down)
Airflow Direction Control(left & right)
Remote Controller Type
Cooling
Setting Temperature
Range
Heating
Functions
Auto Operation (Micom Control)
Auto Changeover (Micom Control)
Self Diagnosis
Timer
Sleep Operation
Soft Dry Operation
Restart Delay(minute)
Deice Control(Defrost)
Hot Start
Jet Cool
Low Ambient Operation
Special Function

AS-W093ERH0

AS-W123ERH0

AS-W1838RH0

AS-W2438RH0

0.89~2.70~3.70
3,070~9,200~12,620
0.89~3.52~5.00
3,070~12,000~17,060
690
3.2 / 4.2
3.2 / 4.2
3.91
13.33
19.7
9.5
1/220/60
94.2
10.5(371)
27(954)
1.2
31 / 27 / 22
45
R410A, 1,000(35.3)
20(0.22)
Rotary
5RS102XAA21
Brushless DC Motor
PVE(FV50S)
320
Cross Flow Fan
20
Propeller
BLDC
43
15
3*1.0
4*1.0 (Including Earth)
6.35(1/4)
9.52(3/8)
21.5 / 16.0(0.85 / 0.63)
912*282*165
35.9*11.1*6.5
770*545*245
30.3*21.5*9.6
10(22)
32(71)
12.0(26.5)
37(81.6)
-5~43(23~109.4)
-10(-15)~24(14.0~75.2)
15(49.2)
7.5(24.6)
SE MIRROR + UL
Thermistor
O
O
O
O
3/4/3
Auto
Auto
Wireless LCD(EZ-Remocon)
18C ~ 30C
16C ~ 30C
O
O
24h, On/Off
O
O
2
O
O
O
O
-

0.89~3.52~4.04
3,070~12,000~13,800
0.89~4.54~5.49
3,070~15,500~18,720
1120
5.0 / 5.9
5.0 / 5.9
3.14
10.71
18.7
9.5
1/220/60
98.7
10.5(371)
27(954)
1.5
35 / 29 / 25
45
R410A, 1,000(35.3)
20(0.22)
Rotary
5RS102XAA21
Brushless DC Motor
PVE(FV50S)
320
Cross Flow Fan
20
Propeller
BLDC
43
15
3*1.0
4*1.0 (Including Earth)
6.35(1/4)
9.52(3/8)
21.5 / 16.0(0.85 / 0.63)
912*282*165
35.9*11.1*6.5
770*545*245
30.3*21.5*9.6
10(22)
32(71)
12.0(26.5)
37(81.6)
-5~43(23~109.4)
-10(-15)~24(14.0~75.2)
15(49.2)
7.5(24.6)
SE MIRROR + UL
Thermistor
O
O
O
O
3/4/3
Auto
Auto
Wireless LCD(EZ-Remocon)
18C ~ 30C
16C ~ 30C
O
O
24h, On/Off
O
O
2
O
O
O
O
-

1.76~5.28~5.80
6,000~18,000~19,800
1.40~6.07~6.65
4,800~20,700~22,700
1675
7.3 / 7.3
7.3 / 7.3
3.15
10.75
16.2
8.2
1/220/60
98.3
16(565)
42(1483)
2.1
42 / 39 / 36
54
R410A, 1,200(42.3)
20(0.21)
E-Scroll
5CS130XCC03
Brushless DC Motor
RB68A
480
Cross Flow Fan
30
Propeller
AC Induction
65
20
3*1.5
4*1.5 (Including Earth)
6.35(1/4)
12.70(1/2)
21.5 / 16.0(0.85 / 0.63)
1,107*299*200
43.6*11.8*7.9
870*655*320
34.3*25.79*12.6
15(33.1)
46(101)
17(37.5)
50(110.2)
-5~43(23~109.4)
-10(-15)~24(14.0~75.2)
15(49.2)
7.5(24.6)
S8 + UE
Thermistor
O
O
O
O
3/4/3
Auto
Auto
Wireless LCD(EZ-Remocon)
18C ~ 30C
16C ~ 30C
O
O
24h, On/Off
O
O
3
O
O
O
O
-

3.87~7.03~7.74
13,200~24,000~25,500
3.37~8.09~8.88
12,300~27,600~29,700
2450
11.0 / 13.0
11.0 / 13.0
2.87
9.8
16.2
8.2
1/220/60
96.8
20.3(717)
58(2048)
2.7
43 / 40 /36
55
R410A, 1,800(63.0)
30(0.32)
Rotary
5KD240XCA21
Brushless DC Motor
PVE(FV50S)
900
Cross Flow Fan
30
Propeller
AC Induction
76.5
30
3*2.5
4*2.5 (Including Earth)
9.52(3/8)
15.88(5/8)
21.5 / 16.0(0.85 / 0.63)
1,107*299*200
43.6*11.8*7.9
870*800*320
34.3*31.5*12.6
15(33.1)
60(132)
17(37.5)
64(141.1)
-5~43(23~109.4)
-10(-15)~24(14.0~75.2)
30(98.4)
15(49.2)
S8 + UE1
Thermistor
O
O
O
O
3/4/3
Auto
Auto
Wireless LCD(EZ-Remocon)
18C ~ 30C
16C ~ 30C
O
O
24h, On/Off
O
O
3
O
O
O
O
-

Note : O : Applie, X : Not applied, : No relation


Filters are optional in some specific areas.
For Circuit Breaker Rating, please conform to local standards whenever necessary.

Inverter Single

Left rear piping

Inverter Single

175

133

Unit Outline

442

Installation Plate
5

Place a level on raised tab

442

95

50.5
59.5

23
217

70

159.5

210

285

10

70

885

Right rear piping

210

[Unit : mm]

CHASSIS CODE : SB

Libero

Dimensional drawings
6RMI0-02A

3. Dimensional drawings
3.1 Indoor Units

Inverter Single

Left rear
piping

70

105

69

Unit Outline

460

Measuring Tape
Hanger

Measuring Tape

Installation Plate

Place a level on raised tab

1030

570

56

210

Right rear
piping

325

(Unit : mm)

207

70

250

[Unit : mm]

CHASSIS CODE : SC

Libero

6RMI0-02A
Dimensional drawings

11

Inverter Single

77

71

107

28
50
50*6=300

567
354

912

2-R16

51
50

171
282

12
165

53

282
4

[Unit : mm]

51

Knockout hole

For pipe and cable

Remark

CHASSIS CODE: SE

1. Unit should be installed in compliance with the installation manual


in the product box.
2. Unit shall be grounded in accordance with the local regulations or
applicable national codes.
3. The Unit is powered from the outdoor unit. Therefore power cable
should be connected with the outdoor unit.

Note

Installation plate

Air suction grille

3
5

Display & signal receiver

Part Name
Front panel

No.

ART COOL Mirror

Dimensional drawings
6RMI0-02A

37

148

45

140
188

70

926

1107

70
65
221

72
58 122

296

175

Inverter Single
45

93

53

[Unit : mm]

200

10
63

299

Knockout hole

For pipe and cable

Remark

CHASSIS CODE: S8

1. The unit should not be installed in a closed area.


2. In an area or space having no proper circulation, an air guide should
be installed on the outdoor side.

Note

Installation plate

Air suction grille

Display & signal receiver

Part Name
Front panel

No.

ART COOL Mirror

6RMI0-02A
Dimensional drawings

13

48

Dimensional drawings

6RMI0-02A

[Unit : mm]

CHASSIS CODE : UA3

3.2 Outdoor Units

14

Inverter Single

261

450

267

275

770

770

45

56

245
285
10
65
4.3

518.4

245

Inverter Single
3

[Unit : mm]

55.3

CHASSIS CODE : UL

6RMI0-02A
Dimensional drawings

15

540

Inverter Single

630
513

25

16

301

531

546

54.6

160

340
360
79

870

320

[Unit : mm]

CHASSIS CODE : UE

Dimensional drawings
6RMI0-02A

76.4

319

655

Inverter Single

319

25

800

301

546

3
5

160

54.6

340
76.4
79

870

320

2
3

[Unit : mm]

CHASSIS CODE : UE1

6RMI0-02A
Dimensional drawings

17

360

Wiring diagrams

6RMI0-02A

4. Wiring diagrams
4.1 Indoor units
Models: ASNQ093B1U0 (VA093CL.NB0), ASNQ123B1U0 (VA123CL.NB0)

Models: ASNQ183C2U0 (VA183CL.NB0), ASNQ243C2U0 (VA243CL.NB0)

18

Inverter Single

6RMI0-02A

Wiring diagrams

Models: ASNW093ERH0 , ASNW123ERH0

Models: ASNW1838RH0 , ASNW2438RH0

Inverter Single

19

Wiring diagrams

6RMI0-02A

4.2 Outdoor units


Models: ASUQ093B1U0 (VA093CL.UB0)

Models: ASUQ123B1U0 (VA123CL.UB0)

20

Inverter Single

6RMI0-02A

Wiring diagrams

CN_CENTRAL

Models: ASUQ183C2U0 (VA183CL.UB0)

Models: ASUQ243C2U0 (VA243CL.UB0)

Inverter Single

21

Wiring diagrams

6RMI0-02A

Models: ASUW093ERH0 , ASUW123ERH0

Models: ASUW1838RH0 , ASUW2438RH0

22

Inverter Single

6RMI0-02A

Refrigerant cycle diagram

5. Refrigerant cycle diagram


Models : AS-Q093B1U0 (VA093CL.SB0), AS-Q123B1U0 (VA123CL.SB0)

Indoor Unit

Outdoor Unit

Liquid Side
EEV

2-Way Valve

Th2
Th1
Th4

Heat
Exchanger
(Evaporator)

Heat
Exchanger
(Condenser)

Th3

Th7

Th6

Gas Side
Th6

3-Way Valve

Accumulator

Compressor
Cooling

LOC.

Description

PCB Connector

Th1

Thermistor for sunction air temperature

Th2

Thermistor for evaporator inlet temperature

Th3

Thermistor for evaporator outlet temperature

CN-TH2(Indoor)

Th4

Thermistor for evaporator middle temperature

CN-TH3(Indoor)

Th5

Thermistor for discharge pipe temperature

CN-TH2(OUTDOOR)

Th6

Thermistor for condensing temperature

CN-TH1(OUTDOOR)

Th7

Thermistor for outdoor air temperature

CN-TH1(OUTDOOR)

CN-TH1(Indoor)

EEV : Electronic Expansion Valve

Inverter Single

23

Refrigerant cycle diagram

6RMI0-02A

Models : AS-Q183C2U0 (VA183CL.SB0), AS-Q243C2U0 (VA243CL.SB0)

Indoor Unit

Outdoor Unit

Liquid Side
EEV

2-Way Valve

Th2
Th1
Th4

Heat
Exchanger
(Evaporator)

Heat
Exchanger
(Condenser)

Th3

Th7

Th6

Gas Side
3-Way Valve

Reversing Valve

Accumulator

Th5

Cooling
Heating

Compressor

LOC.

Description

PCB Connector

Th1

Thermistor for suction air temperature

Th2

Thermistor for evaporator inlet temperature

Th3

Thermistor for evaporator outlet temperature

CN-TH2(Indoor)

Th4

Thermistor for evaporator middle temperature

CN-TH3(Indoor)

Th5

Thermistor for discharge pipe temperature

Th6

Thermistor for suction pipe temperature

Th7

Thermistor for condensing temperature

Th8

Thermistor for outdoor air temperature

Th9

Thermistor for condensing middle temperature

EEV : Electronic Expansion Valve

24

Inverter Single

CN-TH1(Indoor)

CN-TH3(OUTDOOR)
CN-TH2(OUTDOOR)
CN-TH4(OUTDOOR)

6RMI0-02A

Refrigerant cycle diagram

Models : AS-W093ERH0 , AS-W123ERH0


Indoor Unit

Outdoor Unit

Liquid Side
EEV

2-Way Valve

Th2
Th1

Heat
Exchanger
(Evaporator)

Heat
Exchanger
(Condenser)
Th5
Th4

Gas Side
3-Way Valve

Reversing Valve

Accumulator

Th3

Compressor

LOC.

Description

Cooling
Heating

PCB Connector

Th1

Thermistor for indoor air temperature

CN_TH1(INDOOR)

Th2

Thermistor for evaporating temperature

CN_TH2(INDOOR)

Th3

Thermistor for discharge pipe temperature

CN_D_PIPE(OUTDOOR)

Th4

Thermistor for condensing temperature

Th5

Thermistor for outdoor air temperature

CN_TH1(OUTDOOR)

* EEV : Electronic Expansion Valve.

Inverter Single

25

Refrigerant cycle diagram

6RMI0-02A

Modes : AS-W1838RH0 , AS-W2438RH0


Indoor Unit

Outdoor Unit

Liquid Side
EEV

2-Way Valve

Th2
Th1

Heat
Exchanger
(Evaporator)

Heat
Exchanger
(Condenser)
Th4

Th3
Th5

Gas Side
Reversing Valve

Accumulator

3-Way Valve

Th6

Th7

Compressor

LOC.
Th1
Th2
Th3

26

Description

PCB Connector

Thermistor for indoor air temperature

CN_TH1(INDOOR)
CN_TH2(INDOOR)

Thermistor for evaporating temperature

CN_TH3(INDOOR)

Th4

Thermistor for outdoor air temperature

Th5

Thermistor for condensing temperature

Th6

Thermistor for discharge pipe temperature

Th7

Thermistor for suction pipe temperature

CN_TH2(OUTDOOR)
CN_TH3(OUTDOOR)

Inverter Single

Cooling
Heating

6RMI0-02A

Capacity tables

6. Capacity tables
6.1 Cooling Capacity

AS-Q093B1U0 (VA093CL.SB0)
Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

CDB
20.0
22.0
25.0
27.0
30.0
32.0

20
TC
2.59
2.75
2.91
2.99
3.23
3.39

CDB
20.0
22.0
25.0
27.0
30.0
32.0

PI
0.38
0.51
0.55
0.56
0.56
0.55

TC
2.48
2.63
2.79
2.87
3.11
3.27

SHC
2.37
2.33
2.28
2.27
2.15
2.08

32
PI
0.39
0.51
0.55
0.56
0.57
0.58

TC
2.32
2.48
2.64
2.72
2.96
3.11

SHC
2.42
2.38
2.33
2.32
2.19
2.13

35
PI
0.53
0.62
0.65
0.66
0.68
0.69

TC
2.25
2.41
2.57
2.64
2.88
3.04

SHC
2.46
2.42
2.37
2.36
2.23
2.16

PI
0.59
0.67
0.69
0.68
0.71
0.73

Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

25

SHC
2.34
2.30
2.25
2.25
2.12
2.06

40
TC
2.16
2.31
2.47
2.55
2.78
2.94

43

SHC
2.45
2.40
2.35
2.35
2.22
2.15

PI
0.65
0.70
0.71
0.71
0.72
0.73

TC
2.10
2.25
2.41
2.49
2.72
2.88

46

SHC
2.47
2.44
2.39
2.39
2.25
2.19

PI
0.63
0.66
0.66
0.66
0.67
0.68

TC
2.04
2.19
2.35
2.43
2.66
2.82

SHC
2.49
2.45
2.40
2.39
2.26
2.19

PI
0.57
0.58
0.56
0.56
0.56
0.57

AS-Q123B1U0 (VA123CL.SB0)
Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

CDB
20.0
22.0
25.0
27.0
30.0
32.0

20
TC
3.17
3.36
3.56
3.65
3.95
4.14

CDB
20.0
22.0
25.0
27.0
30.0
32.0

PI
0.46
0.63
0.68
0.69
0.69
0.68

TC
3.03
3.22
3.42
3.51
3.81
4.00

SHC
2.64
2.59
2.54
2.53
2.39
2.32

32
PI
0.48
0.63
0.68
0.69
0.71
0.71

TC
2.84
3.04
3.23
3.33
3.62
3.81

SHC
2.70
2.65
2.59
2.59
2.44
2.37

35
PI
0.65
0.77
0.81
0.81
0.83
0.85

TC
2.76
2.95
3.14
3.23
3.53
3.72

SHC
2.74
2.69
2.64
2.63
2.48
2.41

PI
0.73
0.82
0.85
0.84
0.88
0.90

Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

25

SHC
2.61
2.57
2.51
2.50
2.36
2.30

40
TC
2.64
2.83
3.02
3.12
3.41
3.60

SHC
2.73
2.68
2.62
2.62
2.47
2.40

Symbol
AFR : Air flow rate
DB : Dry bulb temperature
WB : Wet bulb temperature
TC : Total capacity
SHC : Sensible capacity
PI : Power Input
(Comp.+ indoor fan motor+outdoor fan motor)

43
PI
0.80
0.86
0.87
0.87
0.89
0.91

[m3/min]
[C]
[C]
[kW]
[kW]
[kW]

TC
2.56
2.76
2.95
3.04
3.33
3.52

SHC
2.76
2.72
2.67
2.66
2.51
2.44

46
PI
0.78
0.82
0.82
0.81
0.82
0.84

TC
2.49
2.68
2.88
2.97
3.26
3.45

SHC
2.78
2.73
2.67
2.66
2.52
2.44

PI
0.70
0.71
0.69
0.69
0.69
0.70

Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
4. Capacities are based on the following conditions:
- Interconnecting Piping Length 7.5m
- Level Difference of Zero.

Inverter Single

27

Capacity tables

6RMI0-02A

AS-Q183C2U0 (VA183CL.SB0)
Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

CDB
20.0
22.0
25.0
27.0
30.0
32.0

20
TC
5.18
5.50
5.81
5.97
6.45
6.77

SHC
4.23
4.16
4.07
4.06
3.83
3.72

CDB
20.0
22.0
25.0
27.0
30.0
32.0

PI
0.83
1.13
1.22
1.24
1.24
1.23

TC
4.95
5.27
5.59
5.75
6.22
6.54

SHC
4.28
4.20
4.11
4.10
3.87
3.76

32
PI
0.87
1.14
1.23
1.25
1.27
1.28

TC
4.65
4.97
5.28
5.44
5.91
6.23

SHC
4.37
4.29
4.20
4.19
3.96
3.84

35
PI
1.17
1.38
1.45
1.46
1.50
1.53

TC
4.51
4.82
5.14
5.28
5.76
6.08

SHC
4.44
4.37
4.27
4.26
4.02
3.90

PI
1.31
1.48
1.54
1.51
1.58
1.61

Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

25

40
TC
4.31
4.62
4.94
5.10
5.57
5.88

43

SHC
4.42
4.34
4.25
4.24
4.00
3.88

PI
1.43
1.54
1.57
1.57
1.60
1.63

TC
4.19
4.51
4.82
4.98
5.45
5.76

46

SHC
4.47
4.41
4.32
4.31
4.07
3.95

PI
1.40
1.47
1.47
1.46
1.48
1.51

TC
4.07
4.39
4.70
4.86
5.33
5.64

SHC
4.50
4.42
4.32
4.31
4.07
3.95

PI
1.26
1.28
1.25
1.23
1.23
1.26

AS-Q243C2U0 (VA243CL.SB0)
Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

CDB
20.0
22.0
25.0
27.0
30.0
32.0

20
TC
6.89
7.32
7.74
7.95
8.59
9.02

CDB
20.0
22.0
25.0
27.0
30.0
32.0

PI
1.27
1.72
1.86
1.88
1.88
1.87

SHC
5.14
5.05
4.94
4.93
4.66
4.52

40
TC
5.74
6.16
6.58
6.78
7.41
7.83

SHC
5.31
5.22
5.10
5.09
4.81
4.67

Symbol
AFR : Air flow rate
DB : Dry bulb temperature
WB : Wet bulb temperature
TC : Total capacity
SHC : Sensible capacity
PI : Power Input
(Comp.+ indoor fan motor+outdoor fan motor)

28

TC
6.59
7.02
7.44
7.65
8.28
8.70

32
PI
1.33
1.74
1.87
1.90
1.93
1.95

TC
6.19
6.61
7.03
7.24
7.87
8.29

SHC
5.25
5.16
5.05
5.04
4.76
4.62

35
PI
1.78
2.10
2.21
2.23
2.28
2.33

TC
6.00
6.42
6.84
7.03
7.67
8.09

SHC
5.34
5.25
5.13
5.12
4.83
4.69

PI
1.99
2.26
2.34
2.30
2.41
2.46

Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

25

SHC
5.09
5.00
4.89
4.87
4.60
4.47

43
PI
2.18
2.35
2.39
2.39
2.43
2.48

[m3/min]
[C]
[C]
[kW]
[kW]
[kW]

TC
5.58
6.00
6.42
6.63
7.25
7.67

SHC
5.37
5.30
5.19
5.18
4.89
4.74

46
PI
2.14
2.24
2.24
2.23
2.25
2.30

TC
5.42
5.84
6.26
6.47
7.10
7.51

SHC
5.41
5.31
5.20
5.18
4.90
4.75

PI
1.92
1.94
1.90
1.88
1.88
1.93

Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
4. Capacities are based on the following conditions:
- Interconnecting Piping Length 7.5m
- Level Difference of Zero.

Inverter Single

6RMI0-02A

Capacity tables

AS-W093ERH0
Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

CDB
20.0
22.0
25.0
27.0
30.0
32.0

20
TC
2.65
2.81
2.97
3.05
3.30
3.46

25

SHC
2.21
2.17
2.12
2.11
2.00
1.94

PI
0.38
0.52
0.56
0.57
0.57
0.56

CDB
20.0
22.0
25.0
27.0
30.0
32.0

SHC
2.23
2.19
2.14
2.14
2.02
1.96

32
PI
0.40
0.52
0.56
0.57
0.58
0.58

TC
2.38
2.54
2.70
2.78
3.02
3.18

SHC
2.28
2.24
2.19
2.18
2.06
2.00

35
PI
0.53
0.63
0.66
0.67
0.69
0.70

TC
2.31
2.47
2.63
2.70
2.95
3.11

SHC
2.32
2.27
2.23
2.22
2.10
2.03

PI
0.60
0.68
0.70
0.69
0.72
0.74

Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

TC
2.53
2.69
2.86
2.94
3.18
3.34

40
TC
2.20
2.36
2.53
2.61
2.85
3.01

SHC
2.30
2.26
2.21
2.21
2.08
2.02

43
PI
0.66
0.71
0.72
0.72
0.73
0.74

TC
2.14
2.30
2.46
2.54
2.79
2.95

46

SHC
2.33
2.30
2.25
2.24
2.12
2.06

PI
0.64
0.67
0.67
0.67
0.68
0.69

TC
2.08
2.24
2.40
2.48
2.73
2.89

SHC
2.35
2.30
2.25
2.25
2.12
2.06

PI
0.58
0.58
0.57
0.56
0.56
0.58

AS-W123ERH0
Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

CDB
20.0
22.0
25.0
27.0
30.0
32.0

20
TC
3.45
3.66
3.88
3.98
4.30
4.51

CDB
20.0
22.0
25.0
27.0
30.0
32.0

PI
0.62
0.84
0.91
0.92
0.92
0.91

TC
3.30
3.51
3.72
3.83
4.15
4.36

SHC
3.40
3.34
3.27
3.26
3.08
2.99

32
PI
0.65
0.85
0.91
0.93
0.94
0.95

TC
3.10
3.31
3.52
3.63
3.94
4.15

SHC
3.48
3.42
3.34
3.33
3.15
3.06

35
PI
0.87
1.02
1.07
1.09
1.11
1.13

TC
3.01
3.21
3.42
3.52
3.84
4.05

SHC
3.54
3.47
3.40
3.39
3.20
3.11

PI
0.97
1.10
1.14
1.12
1.17
1.20

Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

25

SHC
3.37
3.31
3.24
3.23
3.05
2.96

40
TC
2.87
3.08
3.29
3.40
3.71
3.92

SHC
3.52
3.45
3.38
3.37
3.18
3.09

Symbol
AFR : Air flow rate
DB : Dry bulb temperature
WB : Wet bulb temperature
TC : Total capacity
SHC : Sensible capacity
PI : Power Input
(Comp.+ indoor fan motor+outdoor fan motor)

43
PI
1.06
1.15
1.16
1.16
1.18
1.21

[m3/min]
[C]
[C]
[kW]
[kW]
[kW]

TC
2.79
3.00
3.21
3.32
3.63
3.84

SHC
3.55
3.51
3.44
3.43
3.24
3.14

46
PI
1.04
1.09
1.09
1.09
1.10
1.12

TC
2.72
2.92
3.13
3.24
3.55
3.76

SHC
3.58
3.52
3.44
3.43
3.24
3.15

PI
0.93
0.95
0.92
0.92
0.92
0.94

Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
4. Capacities are based on the following conditions:
- Interconnecting Piping Length 7.5m
- Level Difference of Zero.

Inverter Single

29

Capacity tables

6RMI0-02A

AS-W1838RH0
Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

CDB
20.0
22.0
25.0
27.0
30.0
32.0

20
TC
5.18
5.50
5.81
5.97
6.45
6.77

25

SHC
3.84
3.78
3.69
3.68
3.48
3.38

PI
0.93
1.25
1.36
1.37
1.37
1.36

CDB
20.0
22.0
25.0
27.0
30.0
32.0

SHC
3.89
3.82
3.74
3.73
3.52
3.42

32
PI
0.97
1.27
1.36
1.38
1.41
1.42

TC
4.65
4.97
5.28
5.44
5.91
6.23

SHC
3.97
3.90
3.82
3.81
3.60
3.49

35
PI
1.30
1.53
1.61
1.62
1.66
1.69

TC
4.51
4.82
5.14
5.28
5.76
6.08

SHC
4.04
3.97
3.88
3.87
3.65
3.55

PI
1.45
1.64
1.70
1.68
1.76
1.79

Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

TC
4.95
5.27
5.59
5.75
6.22
6.54

40
TC
4.31
4.62
4.94
5.10
5.57
5.88

43

SHC
4.01
3.94
3.86
3.85
3.63
3.53

PI
1.59
1.71
1.74
1.74
1.77
1.81

TC
4.19
4.51
4.82
4.98
5.45
5.76

46

SHC
4.06
4.01
3.92
3.91
3.69
3.59

PI
1.56
1.63
1.63
1.62
1.64
1.68

TC
4.07
4.39
4.70
4.86
5.33
5.64

SHC
4.09
4.02
3.93
3.92
3.70
3.59

PI
1.40
1.42
1.38
1.37
1.37
1.40

AS-W2438RH0
Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

CDB
20.0
22.0
25.0
27.0
30.0
32.0

20
TC
6.89
7.32
7.74
7.95
8.59
9.02

CDB
20.0
22.0
25.0
27.0
30.0
32.0

SHC
5.17
5.08
4.97
4.96
4.68
4.55

PI
1.35
1.83
1.98
2.01
2.01
1.99

SHC
5.23
5.14
5.03
5.02
4.74
4.60

40(104)
TC
5.74
6.16
6.58
6.78
7.41
7.83

SHC
5.40
5.31
5.19
5.18
4.89
4.75

Symbol
AFR : Air flow rate
DB : Dry bulb temperature
WB : Wet bulb temperature
TC : Total capacity
SHC : Sensible capacity
PI : Power Input
(Comp.+ indoor fan motor+outdoor fan motor)

30

TC
6.59
7.02
7.44
7.65
8.28
8.70

32
PI
1.41
1.85
2.00
2.02
2.06
2.08

TC
6.19
6.61
7.03
7.24
7.87
8.29

SHC
5.35
5.25
5.14
5.13
4.84
4.70

35
PI
1.90
2.24
2.35
2.38
2.43
2.48

TC
6.00
6.42
6.84
7.03
7.67
8.09

SHC
5.44
5.34
5.22
5.21
4.92
4.78

PI
2.12
2.40
2.49
2.45
2.57
2.62

Outdoor Air Temperature : CDB

Indoor Air
Temperature
CWB
14.0
16.0
18.0
19.0
22.0
24.0

25

43(109.4)
PI
2.33
2.51
2.54
2.55
2.59
2.64

[m3/min]
[C]
[C]
[kW]
[kW]
[kW]

TC
5.58
6.00
6.42
6.63
7.25
7.67

SHC
5.46
5.40
5.28
5.27
4.97
4.83

46(114.8)
PI
2.28
2.38
2.38
2.38
2.40
2.45

TC
5.42
5.84
6.26
6.47
7.10
7.51

SHC
5.50
5.41
5.29
5.28
4.98
4.84

PI
2.04
2.07
2.02
2.00
2.00
2.05

Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
4. Capacities are based on the following conditions:
- Interconnecting Piping Length 7.5m
- Level Difference of Zero.

Inverter Single

6RMI0-02A

Capacity tables

6.2 Heating Capacity

AS-W093ERH0
Outdoor Air Temperature : CWB

Indoor Air
Temperature
CDB
16.0
18.0
20.0
21.0
22.0
24.0

-15
TC
2.65
2.62
2.60
2.60
2.59
2.56

-10
PI
0.73
0.74
0.76
0.77
0.77
0.79

TC
2.78
2.78
2.78
2.78
2.78
2.75

-5
PI
0.72
0.73
0.75
0.76
0.77
0.80

TC
3.02
3.02
3.02
3.02
3.02
2.99

0
PI
0.75
0.77
0.79
0.80
0.82
0.84

TC
3.22
3.22
3.21
3.21
3.20
3.17

6
PI
0.80
0.83
0.85
0.86
0.87
0.89

TC
3.58
3.55
3.52
3.50
3.47
3.44

10
PI
0.86
0.88
0.90
0.91
0.92
0.93

TC
3.78
3.73
3.71
3.71
3.70
3.64

15
PI
0.90
0.91
0.93
0.93
0.94
0.95

TC
4.10
4.09
4.10
4.07
4.04
3.99

PI
0.95
0.97
0.97
0.97
0.97
0.98

AS-W123ERH0
Outdoor Air Temperature : CWB

Indoor Air
Temperature
CDB
16.0
18.0
20.0
21.0
22.0
24.0

-15
TC
3.41
3.38
3.36
3.35
3.34
3.30

-10
PI
1.11
1.13
1.15
1.16
1.17
1.20

TC
3.59
3.59
3.58
3.58
3.59
3.55

-5
PI
1.08
1.11
1.14
1.15
1.17
1.20

TC
3.89
3.90
3.90
3.90
3.90
3.85

0
PI
1.13
1.16
1.20
1.22
1.23
1.27

TC
4.16
4.16
4.15
4.14
4.12
4.09

6
PI
1.22
1.25
1.28
1.30
1.32
1.35

TC
4.61
4.58
4.54
4.51
4.48
4.44

10
PI
1.30
1.33
1.36
1.37
1.38
1.41

TC
4.88
4.82
4.78
4.78
4.78
4.70

PI
1.69
1.73
1.77
1.79
1.80
1.83

TC
6.52
6.44
6.40
6.40
6.39
6.28

15
PI
1.35
1.38
1.40
1.41
1.42
1.43

TC
5.29
5.28
5.29
5.25
5.21
5.15

PI
1.76
1.80
1.82
1.84
1.85
1.86

TC
7.08
7.05
7.07
7.02
6.96
6.88

PI
1.44
1.46
1.47
1.47
1.47
1.48

AS-W1838RH0
Outdoor Air Temperature : CWB

Indoor Air
Temperature
CDB
16.0
18.0
20.0
21.0
22.0
24.0

-15
TC
4.56
4.52
4.49
4.48
4.47
4.42

-10
PI
1.44
1.46
1.49
1.51
1.52
1.56

TC
4.80
4.79
4.79
4.79
4.79
4.75

-5
PI
1.41
1.44
1.48
1.50
1.52
1.57

TC
5.20
5.21
5.21
5.21
5.21
5.15

0
PI
1.47
1.52
1.56
1.58
1.60
1.65

TC
5.56
5.56
5.54
5.53
5.51
5.47

6
PI
1.58
1.63
1.67
1.69
1.71
1.75

TC
6.17
6.13
6.07
6.03
5.99
5.94

10

15
PI
1.88
1.90
1.91
1.91
1.91
1.93

AS-W2438RH0
Outdoor Air Temperature : CWB

Indoor Air
Temperature
CDB
16.0
18.0
20.0
21.0
22.0
24.0

-15
TC
6.08
6.02
5.98
5.97
5.96
5.88

-10
PI
2.36
2.40
2.44
2.47
2.49
2.55

TC
6.40
6.39
6.39
6.39
6.39
6.33

-5
PI
2.31
2.36
2.43
2.46
2.49
2.56

Symbol
AFR : Air flow rate
DB : Dry bulb temperature
WB : Wet bulb temperature
TC : Total capacity
SHC : Sensible capacity
PI : Power Input
(Comp.+ indoor fan motor+outdoor fan motor)

TC
6.94
6.95
6.95
6.95
6.95
6.86

[m3/min]
[C]
[C]
[kW]
[kW]
[kW]

0
PI
2.41
2.48
2.55
2.59
2.63
2.70

TC
7.41
7.40
7.39
7.37
7.35
7.29

6
PI
2.59
2.67
2.74
2.77
2.81
2.87

TC
8.22
8.17
8.09
8.04
7.98
7.92

10
PI
2.78
2.84
2.90
2.93
2.95
3.00

TC
8.69
8.58
8.52
8.52
8.51
8.37

15
PI
2.89
2.94
2.99
3.01
3.02
3.05

TC
9.43
9.40
9.42
9.36
9.28
9.17

PI
3.08
3.11
3.13
3.13
3.13
3.16

Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
4. Capacities are based on the following conditions:
- Interconnecting Piping Length 7.5m
- Level Difference of Zero.
- Outdoor air : 85%RH. However, the condition on nominal capacity
is 7CDB/6CWB

Inverter Single

31

Capacity coefficient factor

6RMI0-02A

7. Capacity coefficient factor


Libero Inverter (C/O)
Cooling

Capacity(%)

100

24K,30K

18K

9K,12K
90

80

70
7.5

15

Total Pipe Length(m)

32

Inverter Single

30

50

6RMI0-02A

Capacity coefficient factor

Artcool Inverter
Cooling

Capacity(%)

100
18K, 24K
9K,12K
90

80

70
7.5

15

30

50

Total Pipe Length(m)

Heating

Capacity(%)

100
18K, 24K

9K,12K
90

80

70
7.5

15

30

50

Total Pipe Length(m)

Inverter Single

33

Capacity coefficient factor

6RMI0-02A

Model No.

Max. Pipe Length[m(ft)] A

Max. Elevation[m(ft)] B

Additional
Refrigerant[g/m(oz/ft)]

AS-Q093B1U0

15(49.2)

7(23)

20(0.22)

AS-Q123B1U0

15(49.2)

7(23)

20(0.22)

AS-Q183C2U0

20(65.6)

15(49.2)

20(0.22)

AS-Q243C2U0

30(98.4)

15(49.2)

35(0.38)

AS-Q243C2U0

15(49.2)

7.5(24.6)

20(0.22

AS-W123ERH0

15(49.2)

7.5(24.6)

20(0.22)

AS-W1838RH0

15(49.2)

7.5(24.6)

20(0.22)

AS-W2438RH0

30(98.4)

15(49.2)

30(0.32)

Indoor unit

Outdoor unit

Capacity is based on standard length


and maximum allowance length is on
the basis of reliability.

A
B

CAUTION:

A
Outdoor unit

Indoor unit

Notes
Equivalent pipe length = actual pipe length + number of band x 0.3
Additional Refrigerant Charge
Example: For Model 12k Btu/h having 20m pipe length, additional refrigerant to be charged is (20-7) x 20 = 260g
* Refer to the specification for the maximum pipe length of each model.

34

Inverter Single

6RMI0-02A

Operation range

8. Operation range
Libero Inverter (C/O)
Cooling
48

Operative

10

Outdoor
Unit
[C DB]

Continuous
operation

10
18

32

Indoor Unit [C DB]


Operative: Intermittent operation due to the operational
conditions (indoor/outdoor temperature, humidity,
load etc.) can cause the heating capacity to
decrease.

Artcool Inverter
Cooling

Heating

43

Continuous
operation

24
Outdoor
Unit
[C DB]

Warming up
Operation

Outdoor
Unit
[C DB]

Continuous
operation

-10

Operative

-5

-15
18

32

Indoor Unit [C DB]

16

30

Indoor Unit [C DB]


Operative: Intermittent operation due to the operational
conditions (indoor/outdoor temperature, humidity,
load etc.) can cause the heating capacity to
decrease.

Inverter Single

35

Air flow and temperature distributions(reference data)

6RMI0-02A

9. Air flow and temperature distributions(reference data)


Libero Inverter (C/O)
2.63 kW (9kBtu/h)

3.51 kW (12kBtu/h)

Cooling

Cooling

Discharge angle:45

Discharge angle:45

AirVelocity [m/s]

2.7m

AirVelocity [m/s]

2.7m
2m

2m
1.21.5
1.0

1.25
1.0

1m

1m
0.75
1.0
0.75

0.75
0.50.5

0.5

5m

4m

3m

2m

0m
0m

1m

Temperature [C]

2.7m

5m

3m

4m

2m

1m

Temperature [C]

2.7m
2m

2m

23

1m

1m
29

25

5m

36

4m

3m

25

24

2m

1m

0m
0m

0m
0m

5m

Inverter Single

4m

28

3m

24

2m

23
30

1m

0m
0m

6RMI0-02A

Air flow and temperature distributions(reference data)

2.63 kW (9kBtu/h)
Cooling

Heating

Discharge angle:45

Discharge angle:50

Air velocity [m/s]

Air velocity [m/s]

2.7m

2.7m

2m

2m
1.2
1.0

1.0
1m

0.75

1m

0.75
0.5
5m

4m

3m

0.5

2m

0m
0m

1m

Temperature [C]

5m

4m

3m

2m

0m
0m

1m

Temperature [C]

2.7m

2.7m

2m

23

5m

4m

25
3m

2m

1m

1m

28
29

24
2m

0m
0m

1m

5m

4m

3m

30
2m

0m
0m

1m

3.51 kW (12kBtu/h)
Cooling

Heating

Discharge angle:45

Discharge angle:50

Air velocity [m/s]

2.7m

Air velocity [m/s]

2.7m

2m

2m

1.2
1.0

1m

1.0

1m

0.75
0.5
5m

4m

3m

0.75

0.5

1m

2m

Temperature [C]

0m
0m

2.7m

5m

4m

2m

3m

0m
0m

1m

Temperature [C]

2.7m

2m

23

2m

30

1m

1m

29
24

25
5m

4m

3m

2m

1m

0m
0m

28
5m

Inverter Single

4m

3m

2m

1m

0m
0m

37

Sound level

6RMI0-02A

10. Sound levels


10.1 Indoor Units
Overall
Notes:
- Sound measured at 1m away from the center of the unit.
- Data is valid at free field condition.
- Data is valid at nominal operation condition.
- Reference accoustic pressure 0dB=20Pa.
- Sound level will vary depending on a range of factors such as
the construction(acoustic absorption coefficient) of particular
room in which the equipment is installed.
- The operating conditions are assumed to be standard.

1m
0.8m
Microphone
Model

H
39
39
42
45
31
35
42
43

ASNQ093B1U0
ASNQ123B1U0
ASNQ183C2U0
ASNQ243C2U0
ASNW093ERH0
ASNW123ERH0
ASNW1838RH0
ASNW2438RH0

Sound Levels [dB(A)]


M
33
33
38
40
27
29
39
40

L
24
24
34
35
22
25
36
36

Sound Pressure Level

70

70

NC-65

60
NC-60
NC-55

50
NC-50
NC-45
NC-40
NC-35

30

NC-30

NC-25

20

Approximate
Hearing
Threshold
63

NC-60

250

500

1000

2000

4000

NC-55

50

NC-50
NC-45

40

NC-40
NC-35

30

NC-30

10

8000

Approximate
Hearing
Threshold
63

Octave Band Center Frequency (Hz)

70

50

40

30

20

40

30

20

Approximate
Hearing
Threshold

38

10

NC-40
NC-35

30

NC-30
NC-25
Approximate
Hearing
Threshold
63

125

NC-20

250

500

NC-15
1000 2000 4000 8000

Octave Band Center Frequency (Hz)

ASNW1838RH0
70

60

50

40

30

20

10

Inverter Single

NC-45

40

80

50

NC-55
NC-50

10

NC-15
125
250 500 1000 2000 4000 8000
Octave Band Center Frequency (Hz)

60

Approximate
Hearing
Threshold
10

NC-60
50

NC-20

Octave Band Sound Pressure Level (dB re 20Pa )

70

Octave Band Sound Pressure Level (dB re 20Pa )

Octave Band Sound Pressure Level (dB re 20Pa )

80

NC-65

60

ASNW123ERH0

ASNW093ERH0
80

60

70

20

NC-25

20

NC-15

125

NC-65

60

NC-20

10

80

Octave Band Sound Pressure Level (dB re 20Pa )

80

40

ASNQ243C2U0

ASNQ183C2U0

80

Octave Band Sound Pressure Level (dB re 20Pa )

Octave Band Sound Pressure Level (dB re 20Pa )

ASNQ093B1U0
ASNQ123B1U0

6RMI0-02A

Sound level

ASNW2438RH0
Octave Band Sound Pressure Level (dB re 20Pa )

80

70

60

50

40

30

20

10
63

125

250

500

1000

2000

4000

8000

Octave Band Center Frequency (Hz)

Inverter Single

39

Sound level

6RMI0-02A

10.2 Outdoor Units


Overall
Notes:
- Sound measured at 1m away from the center of the unit.
- Data is valid at free field condition.
- Data is valid at nominal operation condition.
- Reference accoustic pressure 0dB=20Pa.
- Sound level will vary depending on a range of factors such as
the construction(acoustic absorption coefficient) of particular
room in which the equipment is installed.
- The operating conditions are assumed to be standard.

Center of
Outdoor Unit

1m

1m

Sound Levels [dB(A)]


H
47
47
53
53
45
45
54
55

Model
ASUQ093B1U0
ASUQ123B1U0
ASUQ183C2U0
ASUQ243C2U0
ASUW093ERH0
ASUW123ERH0
ASUW1838RH0
ASUW2438RH0

Sound Pressure Level


ASUQ093B1U0
ASUQ123B1U0

80

70

70

70

Sound Pressure Level (dB re 20Pa )

NC-65

NC-65

60

NC-60

NC-55

50

NC-60
NC-55

50

NC-50
NC-45

40

NC-50
NC-45

40

NC-40

NC-35

30

NC-30

20

63

NC-30

NC-15

125

250

500

1000

2000

4000

NC-25

20

NC-20

10

NC-35

30

NC-25

Approximate
Hearing
Threshold

NC-40

10

8000

Approximate
Hearing
Threshold
63

500

NC-15
1000 2000 4000 8000

NC-65

60
NC-60
NC-55

50
NC-50
NC-45

40

NC-40
NC-35

30

NC-30

NC-25

20

Approximate
Hearing
Threshold

70

NC-65

60
NC-60
NC-55

50
NC-50

NC-15

125

250

500

1000

2000

4000

Octave Band Center Frequency (Hz)

8000

NC-45

40

NC-40
NC-35

30

NC-30

NC-25

20

Approximate
Hearing
Threshold

NC-20

10
63

Octave Band Sound Pressure Level (dB re 20Pa )

80

70

NC-20
NC-15

10
63

NC-6
NC-5

50
NC-5
NC-4

40
NC-4

125

250

500

1000

2000

4000

Octave Band Center Frequency (Hz)

Inverter Single

NC-3

30

NC-3

NC-2

20

Approximate
Hearing
Threshold

NC-2
NC-1

10
63

125

250

500

1000

2000

4000

Octave Band Center Frequency (Hz)

ASUW2438RH0

ASUW1838RH0
Octave Band Sound Pressure Level (dB re 20Pa )

250

Octave Band Center Frequency (Hz)

80

NC-6

60

NC-20

125

Octave Band Center Frequency (Hz)

Octave Band Sound Pressure Level (dB re 20Pa )

80

Pare)20Pa )
Octave Band Sound Pressure Level (dB

80

60

40

ASUW093ERH0
ASUW123ERH0

ASUQ183C2U0
ASUQ243C2U0

8000

8000

6RMI0-02A

Remote controller

11. Remote controller


Wireless Remote Controller
The controls will look like the following.

Signal transmitter
ON/OFF BUTTON
Used to turn off/on the unit.
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.

INDOOR FAN SPEED SELECTION BUTTON


Used to select fan speed in six steps low, medium-low,
medium, medium-high, high and natural wind.
PLASMA BUTTON
Used to start or stop the plasma-purification.
SLEEP

SLEEP MODE AUTO BUTTON


Used to set sleep mode auto operation.

Operation Mode
Cooling Operation
Auto Operation

Healthy Dehumidification Operation


Air Circulation

Reset (display): When you press the reset button, all the functions shown on the screen
of remote controller (above image), will be visible on the display. But some of these
functions are optional for your product and may not actually function.

Inverter Single

41

Remote controller

6RMI0-02A

The controls will look like the following.

Signal transmitter

TIME ADJUSTING BUTTONS


Used to adjust the time.
TIMER SET/CLEAR BUTTON(after adjusting)
Used to set and to cancel the timer operation.
RESET BUTTON
Used prior to resetting time.
LED LUMINOSITY BUTTON
Used to adjust LED luminosity.

SLEEP

JET COOL BUTTON


Used to start or stop the speed cooling.
The Jet Cool operates fan in super high speed
in cooling mode.
HORIZONTAL VANE CONTROL BUTTON
Used to set the desired vertical airflow direction.
VERTICAL LOUVER CONTROL BUTTON
Used to set the desired horizontal airflow direction.
AUTO CLEAN BUTTON
Used to set auto clean.
ENERGY SAVING COOLING BUTTON
Used to save Energy.
ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
TIMER BUTTON(before adjusting)
Used to set the current time and the time of starting / stopping.

Reset (display): When you press the reset button, all the functions shown on the screen of remote
controller (above image), will be visible on the display. But some of these functions are optional
for your product and may not actually function.

42

Inverter Single

6RMI0-02A

Remote controller

The controls will look like the following.


Signal transmitter

6
3
4
10

2
7
11
8
13

CANCEL
ON

OFF

9
12
17
18

SET
AUTO CLEAN

14

15

16

Flip-up door
(opened)

Operation Mode
Cooling Operation
Auto Operation or Auto Changeover

Healthy Dehumidification Operation


Heating Operation

Cooling Model(

), Heat Pump Model(

1. START/STOP BUTTON
Used to turn off/on the unit.
2. OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
3. ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
4. INDOOR FAN SPEED SELECTOR BUTTON
Used to select fan speed in four steps
low, medium, high and CHAOS.
5. JET COOL/HEAT BUTTON
Used to start or stop the speed cooling/heating.
(It operates fan in super high speed)
6. CHAOS SWING BUTTON
Used to stop or start louver movement and set the
desired up/down airflow direction.
7. ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping
operation.
8. TIME SETTING BUTTONS
Used to adjust the time.
9. TIMER SET/CANCEL BUTTON
Used to set and to cancel the timer operation.
10. SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
11. AIR CIRCULATION BUTTON(OPTIONAL)
Used to circulate the room air without cooling or
heating.
ENERGY-SAVING COOLING MODE
BUTTON (OPTIONAL) For inverter type models
12. ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
13. PLASMA BUTTON(OPTIONAL)
Used to start or stop the plasma-purification
function.
14. HORIZONTAL AIRFLOW DIRECTION
CONTROL BUTTON (OPTIONAL)
Used to set the desired horizontal airflow
direction.
15. RESET BUTTON
Used prior to resetting time.
16. 2nd F BUTTON
Used prior to using modes printed in blue at the
bottom of buttons.
17. AUTO CLEAN BUTTON(OPTIONAL)
Used to set auto clean mode.
In some models this button has a 2nd function of
LED luminosity control.
18. LCD LUMINOSITY BUTTON(OPTIONAL)
Used to adjust LCD luminosity.

NOTICE
To use the functions printed in blue at the bottom of the buttons press 2nd F button first and then the required
function button. Pressing the 2nd F button activates the blue printed function of the respective button. To
cancel the function press the 2nd F button again else it will automatically cancel if remains idle after 10
seconds.

Inverter Single

43

Installation

6RMI0-02A

12. Installation
Installation Map

Installation plate
Sleeve
Bushing-Sleeve
Putty(Gum Type Sealant)
Bend the pipe as closely
on the wall as possible,
but be careful that it
doesn't break.

Vinyl tape (Wide)

Saddle

Apply after carrying out a


drainage test.
To carry out the drainage
test, remove the air filters
and pour water into the heat
exchanger.

Gas side piping


(Optional Parts)
Liquid side piping
(Optional Parts)
Additional drain pipe
Vinyl tape (Narrow)
Drain Hose
Connecting cable
(Optional Parts)

- The feature can be changed according a type of model.

NOTICE
You should purchase the installation parts.

44

Inverter Single

6RMI0-02A

Installation

Connecting the Cables


Indoor
Connect the cable to the indoor unit by connecting the wires to the terminals on the control board individually
according to the outdoor unit connection. (Ensure that the color of the wires of the outdoor unit and the terminal
No. are the same as those of the indoor unit.)

The circuit diagram is a subject to change without notice.


The earth wire should be longer than the common wires.
When installing, refer to the circuit diagram on the chassis cover.
Connect the wires firmly so that they may not be pulled out easily.
Connect the wires according to color codes, referring to the wiring diagram.

Main power source

Provide a circuit breaker between


power source and the outdoor unit as
shown below.
Circuit
Breaker
(A)

Air
Conditioner

Capacity(Btu/h)
9k~12k
15

18k
20

24k~36k
25

Circuit Breaker
Use a circuit breaker
or time delay fuse.

The power cord connected to the outdoor unit should be complied with the following
specifications (UL recognized or CAS certified).
m

AWG_"A"

m
3

10

Power

Power supply cable (208/230V)


GN

"A"

/YL

Capacity(Btu/h)
9k/12k/18k
24k/30k/36k
14
12

20

mm

The power connecting cable connected to the indoor and outdoor unit should be complied
with the following specifications (UL recognized or CAS certified).
AWG_"B"

Connecting cable (208/230V)

m
3

10

Power
GN

/YL

"B"

Capacity(Btu/h)
9k/12k/16k/18k/24k/30k/36k
18

20

mm

When using the separate wire as the power cord, please fix the separate wire into the control box
panel by using tie wrap as the fixture.

Inverter Single

45

6RMI0-02A

Installation

Installation Guide at the Seaside


CAUTION
1. Air conditioners should not be installed in areas where corrosive gases, such as acid or alkaline gas, are produced.
2. Do not install the product where it could be exposed to sea wind (salty wind) directly. It can result corrosion
on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient performance.
3. If outdoor unit is installed close to the seaside, it should avoid direct exposure to the sea wind. Otherwise it
needs additional anticorrosion treatment on the heat exchanger.

Selecting the location(Outdoor Unit)


1) If the outdoor unit is to be installed close to the seaside, direct exposure to the sea wind should be avoided.
Install the outdoor unit on the opposite side of the sea wind direction.

Sea wind

Sea wind

2) In case, to install the outdoor unit on the seaside, set up a windbreak not to be exposed to the sea wind.

Windbreak

It should be strong enough like concrete to prevent


the sea wind from the sea.
The height and width should be more than 150% of
the outdoor unit.

Sea wind

It should be keep more than 70 cm of space


between outdoor unit and the windbreak for easy
air flow.

3) Select a well-drained place.


1. If you cant meet above guide line in the seaside installation, please contact LG Electronics for the additional anticorrosion treatment.
2. Periodic ( more than once/year ) cleaning of the dust or salt particles stuck on the heat exchanger by using water

46

Inverter Single

P/No.: MFL66305302

Air Conditioner
20 Yeouido-dong, Yeongdeungpo-gu,
Yeouido P.O.Box 335 Seoul,
150-721, Korea.
http://www.lgeaircon.com

All rights reserved


Printed in Korea July.2010
The specifications, designs, and
information in this brochure are subject to
change without notice.

The air conditioners manufactured by LG have received ISO9001 certificate for


quality assurance and ISO14001 certificate for environmental management system.

You might also like