Professional Documents
Culture Documents
AISI 1015
ability.
Carbon content improves machine-ability. Good forming and 100
GENERAL PURPOSE STEELS AISI 1020
welding.
Higher carbon content further improves machine-ability and 100
AISI 1025
machined surface finish.
ASTM A572-50 High strength-low alloy steel, also known as EX-TEN 50. 50 124
KSI minimum yield.
ASTM A441 Offers 50 KSI minimum yield, plus increased corrosion 125
resistance (two times more than carbon steel). AKA TRI-TEN.
HSLA STRUCTURAL STEELS
ASTM A242 Resistance to atmospheric corrosion four times greater than 138
carbon 8 steel. Excellent paint adhesion. AKA COR-TEN A.
ASTM A588A Similar to A242, but has modified chemistry. Atmospheric 138
corrosion is four times better than carbon steel. AKA COR-
TEN B.
ASTM A514-B Lowest in cost with two times the corrosion resistance of 250
carbon steel. Also known as T-1 Type A & NAX.
ASTM A514-H Modification of A514-B chemistry to obtain the minimum 270
mechanical properties in thicknesses over 1-1/4". AKA T-1
Type B.
ALLOY STRUCTURAL STEELS
ASTM A514-F Higher alloy modification offering 100KSI minimum yield 310
strength thru 2 1/2" thickness and four times corrosion
resistance of carbon steel. Also known as T-1.
ASTM A514-Q Higher alloy modification offering 100KSI minimum yield 320
strength 320 thru 6" thickness'. Also known as T-1 Type C.
ASTM A285-C Popular, moderate strength steel for stationary service 130
vessels and boilers. Excellent forming and welding
properties.
ASTM A515-70 Silicon killed carbon steel plate designed for intermediate and 135
high temperature service. Coarse grained. As rolled through
2".
ASTM A516-70 Carbon-manganese-silicon steel plate for moderate and 156
lower temperature service in PV. Improved notch toughness.
PRESSURE VESSEL STEELS
ASTM A517-F Same as A514-F, but produced to PVQ for endurance under 280
thermal and mechanical stress. Thickness' to 2.5".
ASTM A387-G11 Chromium-molybdenum alloy steel plate intended primarily
for boiler and pressure vessels designed for high temperature
service.
Annealed Chromium-molybdenum alloy steel plate intended primarily
ASTM A387-G22 for boiler and pressure vessels designed for high temperature
Norm. & Temp. service. Similar to grade 11 except for higher levels of
chromium and molybdenum.