You are on page 1of 12

AIRLITE PLATE CARRIER

OPERATOR INSTRUCTIONS

01 02 03 04 05

INSERTING PLATE AND BACKER INTO PLATE COVER (OPTIONAL) INSERTING PLATE INTO CARRIER INSERTING SIDE PLATES (EK02 & EK04) ADJUSTING RIDE HEIGHT ADJUSTING SIDE STRAPS

AIRLITE PLATE CARRIER

INSERTING PLATE AND BACKER INTO PLATE COVER (OPTIONAL)

1. Open plate cover from bottom of sleeve and insert plate.

2. Insert plate backer behind plate.

3. Seal plate cover by pulling ap over end of sleeve. Repeat for other plate set.

OPERATOR INSTRUCTIONS

INSERTING PLATE INTO CARRIER

1. Flip carrier over, inside facing up. Detach plate strap and remove from buckle.

2. Fully insert plate behind plate carrier bungee and straps.

3. Route plate strap back through buckle and pull tight to secure plate in place. Reattach strap.

4. Pull bungee up under top ap and hook it over plate strap tab, located behind the upper portion of the plate carrier. Repeat for other side.

AIRLITE PLATE CARRIER

INSERTING SIDE PLATES (EK02 & EK04)

1. Locate side plate pockets on sides of front plate carrier. Open pocket and insert side plate in proper orientation. Pull side pocket sleeve over cover closest to carrier.

2. Continue by pulling side pocket sleeve over other corner of side plate.

3. Tuck sleeve in tightly and seal side plate pocket.

OPERATOR INSTRUCTIONS

ADJUSTING RIDE HEIGHT

Slide back shoulder covers and adjust Velcro shoulder pieces as required. Replace shoulder cover and repeat for other side.

AIRLITE PLATE CARRIER

ADJUSTING SIDE STRAPS

1. Locate side strap bungee by removing stretch cover from side straps.

2. Untie knot in bungee. For a tighter t, re-tie knot away from ends of bungee loop.

3. For a looser t, remove a loop of bungee from the carrier.

4. Replace side strap cover and repeat for other side.

AIRLITE PLATE CARRIER MODELS AND ACCESSORY

EK01: STANDARD CUT PLATE CARRIER EK03: SWIMMER CUT PLATE CARRIER

EK02: STANDARD CUT + SIDE PLATE CARRIER EK04: SWIMMER CUT + SIDE PLATE CARRIER

AIRLITE CHEST RIG

ABOUT US
Crye Precision designs and manufactures truly innovative equipment for Americas ghting forces. We are proud and honored to serve our customers' needs. We spend as much time as we can with users, continuously incorporating their experience and feedback into the gear. We give them our full support and are indebted to them for their service and their sacrice. We make uncompromising gear for uncompromising individuals. We work hard to provide smart, high-performance, long-wearing gear for people who demand the best. We make all of our gear in America from American materials. Every item is designed to help you perform better.

for any and all return shipping charges. This applies to the original purchaser and is nontransferable.

in-person sales, unless the sale is made to certain law enforcement or military personnel. We require that all orders of body armor be accompanied by a government issued photo

BODY ARMOR
It is against Federal Law for a person convicted of a violent felony to purchase or possess body armor. In addition, various states also have laws restricting the purchase or possession of body armor by persons convicted of certain felonies, other crimes of violence, or drug crimes. By purchasing body armor, you acknowledge and certify that (i) you have no felony convictions, (ii) you have not been convicted of any other crime that would restrict your ability to purchase or possess body armor under any Federal or State law, (iii) you do not

identication.

CONTACT INFO
Crye Precision LLC Brooklyn Navy Yard 63 Flushing Ave Unit 252 Brooklyn, NY 11205

Phone: 1.718.246.3838 Fax: 1.718.246.3833 E-mail: sales@cryeprecision.com Web: www.cryeprecision.com

WARRANTY
If a defect in materials or workmanship is found in any of our products, we will repair or replace it, free of charge, for the lifetime of the product. This excludes normal wear and tear. Be aware that the customer is responsible

intend to use the body armor for any criminal purpose and (iv) you are over 18 years old. Crye Precision reserves the right, in its sole discretion, to refuse to sell body armor to any person. Additionally, the sale of body armor to residents of Connecticut is restricted to

COPYRIGHT
2013 Crye Precision LLC. AirLite, EK01, EK02, EK03, EK04, Crye Precision, and the CP logo are trademarks of Crye Precision LLC.

REV 030113

You might also like