Professional Documents
Culture Documents
The Differential Pressure Switch is a new type flow switch,whenthewaterflow(differentialpressure)insystem rises up or falls down to one set value, it will output a warning or sent switchoff signal to automatic control system. And it could also be used to indicate the status of pumporwaterfilter. It could avoid the shortcomings of annual inspection or changing target flow switch for water chiller unit so it could beappliedwidelyinthewaterprotection,statusfeedbackof pump and bypass control of differential pressure in evaporator and condenser in medium and large sized water chillerunit.
Features
Type MaxVoltage MaxCurrent Output P1Setpoint P1ReturnPressure MaxStacticPressure MaxDifferentialPress WorkMedium WorkTemperature Windage ProtectionGrade Cable Connector GE512 250VAC 10A/3A OnorOffinOption SPDT 10bar 5bar WaterorGas 2093CDegree 1% IP54 0.75mm22;2000mm 1/4SAE7/1620UNF
Position
It is very important for the install position of switch. Suitable position is of advantage to the accurancy of DP Switch. The connector should be close with the Water Inlet of Heater Exchanger or Pump or Water Filter, making the WaterInputasthepositionofmeasurepressure.AsFig5. In view of the Low Temperature, to avoid the frost crackofconnectpipe,ifnecessary,shouldconsidertheKeep Warmofswitchandpipe.
AccessoryandOptionalDevice