GASOSYN Energies Canada is a division of Franbec cda ltd, a company established 35 years ago to work in energies, biomass and gas industries.
GASOSYN Energies Canada is promoting the installation of Thermocycling tm plants, using our thermocracking reactor called GASOSYN tm .
We are proposing a new and unique solution to clean the polluted tailings ponds resulting from rejected water from oil sands treatment.
Our solution is to use our Thermocycling tm process. Taking for example, 100 pounds of oil sands, collected and transported to the treatment plant, to fuel the GASOSYN tm , we can get 1 to 1,3 barrel of clean distillated water from tailings ponds.
These dirty tailings ponds can be emptied and the cleaned water reused in boilers for steam underground injection processes, to recover the oil.
The sand, used for fuel, exiting the GASOSYN tm , is in fact sterilized at high temperatures and is free of oil. No other product added, only oil is taken out from the sand. It can then be used for reclaiming or other uses...
The solids from the tailings ponds are circulated in the GASOSYN tm and dried, while traces of organics in it are used as fuel in the process. Dried solids can be disposed of in numerous ways.
A Thermocycling tm plant can be adapted to numerous other applications. The cleaned SYNGAS can replace natural gas or, with additional transformation, generate diesel or gasoline, still having enough residual heat to distillate water in tailings ponds.
See the following diagram of our oil sands treatment and our web site: gasosyn.com
800, Place Victoria, R. 522, Montral (Qc) H4Z 1A1 Tl.: 514-942-8630, fax: 450-723-1301 Courriel: franbec@contact.net
100 pounds of oil sand can produce 1 to 1.3 barrel of distillated water. A Thermocycling tm Plant is an assembly of technologies to use the residual heat from hydrocarbons thermocracking and maximize the overall process efficiency. The source of fuel can be any type of solid or liquid organic materials but we give priority to raw oil sands and/or residues of heavy fractions, not pumpable to the refinery. With Thermocycling tm the heat sources are used to distillate the polluted water from storage ponds. We recover the organics and return the cleaned water, to replace the fresh water for boiler uses or directed back to the river under continuous sampling recording. Using a Thermocycling tm Plant will make oil sands industries more ecological friendly.
Thermocycling applied to Albertas Oil Sands to clean ponds of dirty water. Oil sands extraction produces dirty water usually held in ponds. Raw oil sand as collected can be used to feed our GASOSYN tm Thermocracker. No other fuel required. We have our own autonomy; no connections needed to natural gas or electricity. Existing facilities above the red dotted line with our Thermocycling plant process added under red line. Steam oil to pipeline to the refinery
New cleaned water for boiler OR back to RIVER
ADDED FACILITIES THERMOCYCLING TO CLEAN polluted water PONDS USING only raw oil sand as the FUEL
Clean distilled Hot Recovered water back to River Syngas heat Dirty Conditioned Water from ponds SYNGAS
SLUDGE
Existing Steam boiler Water feeder Existing facilities for Oil Sands processing units. Natural gas Existing source Water from wells or river Heavy fractions Heat recovery & Syngas conditioning GASOSYN tm
REACTOR UP TO 20 T/h raw oil Sand Heat recovery and Distillation Unit Combustible feeder Ponds of dirty and contaminated water ready to be cleaned to recover oil and minerals in it. FEEDSTOCKS AS A COMBUSTIBLE: