Professional Documents
Culture Documents
The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. BS EN 62395 ......................................................16 BS EN 62490 ......................................................11 BS ISO 14813 .....................................................14 BS ISO 24101 .....................................................14 BS ISO 8913 .......................................................18 BS ISO 9679 .......................................................18 BS ISO 10649 .....................................................14 BS ISO 11026 .....................................................14 BS ISO 11452 .....................................................14 BS ISO 11745 .....................................................14 BS ISO 11790 .....................................................14 BS ISO 12319 .....................................................18 BS ISO 12573 .....................................................14 BS ISO 14223 .....................................................14 BS ISO 15031 .....................................................14 BS ISO 15893 .....................................................14 BS ISO 16031 .....................................................18
BS IEC 61892 ......................................................15 BS IEC 62526 ......................................................18 BS IEC 62528 ......................................................18 DD IEC/TS 62395 ................................................17 PD IEC 60079 ...............................................11, 21 PD IEC/TR 62362 ................................................15 PD IEC/TR 62627 ................................................15 PD IEC/TR 62630 ................................................15
Engineering
BS 1251 ..............................................................17 BS 3986 ..............................................................17 BS 4193 ........................................................12, 19 BS 5200 ..............................................................17 BS 7967 ................................................................8 BS EN 1559 ........................................................21 BS EN 3475 ..........................................................8 BS EN ISO 4254 ....................................................8 BS EN 4473 ..........................................................8 BS EN 4700 ..........................................................8 BS EN ISO 7963 ............................................10, 20 BS EN 10031 ......................................................21
BS ISO 17775 .....................................................18 BS ISO 23933 .....................................................18 BS ISO 23935 .....................................................18 BS ISO 26022 .....................................................15 BS ISO 26870 .....................................................15 BS IEC 60462 ......................................................15 DD ISO/TS 29001 ..........................................16, 21 PD CEN/TR 16017 ...............................................15 PD 5500 .............................................................17 PD ISO/TS 29001 ..........................................16, 21 PD IEC/TR 62061 ................................................15 BS 2C 11 ............................................................18 BS 2C 19 ............................................................19 BS 2F 128 ...........................................................16 BS 3F 128 ...........................................................16 BS 5M 23 ...........................................................19 BS 2M 49 ...........................................................19 BS 2M 53 ...........................................................19 BS M 55 .............................................................19 BS M 56 .............................................................19 BS M 57 .............................................................19 BS 2M 59 ...........................................................19 BS M 61 .............................................................19 BS M 62 .............................................................19 BS 2M 63 ...........................................................19 BS M 64 .............................................................19 BS M 65 .............................................................19 BS M 66 .............................................................19
Electrotechnical
BS 2618 ..............................................................19 DD CEN ISO/TS 17575 ........................................15 BS EN 12352 ......................................................16 BS EN 50017 ......................................................20 BS EN 50073 ......................................................20 BS EN 50206 ......................................................10 BS EN 50329 ......................................................17 BS EN 50495 ......................................................11 BS EN 60034 ......................................................20 BS EN 60079 ....................................11, 16, 20, 21 BS EN 60086 ......................................................20 BS EN 60335 ................................................11, 20 BS EN 60512 ......................................................16 BS EN 60730 ......................................................20 BS EN 60794 ......................................................11 BS EN 60898 ......................................................20 BS EN 60947 ......................................................20 BS EN 60950 ................................................16, 17 BS EN 61000 ......................................................17 BS EN 61241 ................................................11, 20 BS EN 61558 ......................................................11 BS EN 61779 ................................................20, 21 BS EN 61788 ......................................................11 BS EN 61935 ......................................................11 BS EN 62271 ......................................................21
BS EN 10222 ......................................................21 BS EN 10226 ......................................................16 BS EN 10228 ......................................................21 BS EN 10243 ......................................................21 BS EN 10250 ......................................................21 BS EN 10254 ......................................................21 BS EN 10293 ......................................................21 BS EN 10295 ......................................................21 BS EN 13141 ......................................................10 BS EN ISO 13349 ................................................10 BS EN 13477 ......................................................10 BS EN ISO 13628 ................................................17 BS EN ISO 13680 ................................................10 BS EN 14399 ......................................................16 BS EN 15566 ......................................................16 BS EN ISO 19879 ................................................10 BS EN ISO 21457 ................................................10 BS EN 27963 ................................................10, 20 BS EN ISO 28781 ................................................10 BS ISO 1726 .......................................................12 BS ISO 4701 .......................................................17 BS ISO 5610 .................................................12, 19 BS ISO 7314 .......................................................18 BS ISO 8574 .......................................................18 BS ISO 8769 .......................................................14 BS ISO 8829 .......................................................18
Information systems
BS EN ISO/IEC 15419 ..........................................10 BS EN ISO/IEC 15423 ..........................................10 BS EN ISO/IEC 15438 ....................................12, 16 BS EN ISO 15423 ................................................10 BS EN 50325 ......................................................11 BS EN 61784 ......................................................11 BS ISO 3901 .......................................................18 BS ISO/IEC 14443 ...............................................14 BS ISO/IEC 15438 ...............................................12 BS ISO 15706 .....................................................18 BS ISO 15707 .....................................................18 BS ISO/IEC 19763 ...............................................14 BS ISO/IEC 24723 ...............................................14 BS ISO/IEC 25045 ...............................................14 BS ISO/IEC 29159 ...............................................15 DD ISO/TS 22789 ................................................16
BS EN ISO 3211 ..............................................8, 20 BS EN ISO 7759 ............................................10, 20 BS EN ISO 8502 ..................................................20 BS EN ISO 9554 ..................................................10 BS EN 12103 ......................................................18 BS EN 12104 ......................................................18 BS EN 12105 ......................................................18 BS EN 12373 ............................................8, 10, 20 BS EN 12455 ......................................................18 BS EN 13121 ......................................................19 BS EN 13245 ................................................10, 20 BS EN 13845 ......................................................18 BS EN 13923 ......................................................19 BS EN 14521 ......................................................18 BS EN 14565 ......................................................18 BS EN 14900 ......................................................18 BS EN ISO 20565 ..........................................16, 19 BS ISO 48 ...........................................................12
Management systems
BS 6079 ................................................................8 BS 11000 ..............................................................8 BS EN ISO 14025 ..........................................12, 16 BS ISO 10668 .....................................................14 BS ISO 14025 .....................................................12 BS ISO 29990 .....................................................15 BS IEC 61710 ......................................................17 DD ISO/TS 10004 ................................................15 PAS 11000 ............................................................8
BS ISO 105 .........................................................12 BS ISO 2004 .................................................12, 19 BS ISO 9277 .................................................14, 19 BS ISO 11093 .....................................................17 BS ISO 11596 .....................................................14 BS ISO 18280 .....................................................14 BS ISO 28343 .....................................................15 DD ISO/TS 10867 ................................................15 DD ISO/TS 26873 ................................................16 PD CEN/TR 14548 ...............................................20 PD CEN/TR 15729 ...............................................15
British Standards
BS 7967-5:2010
Carbon monoxide in dwellings and other premises and the combustion performance of gas-fired appliances. Guide for using electronic portable combustion gas analysers in nondomestic premises for the measurement of carbon monoxide and carbon dioxide levels and the determination of combustion performance no current standard is superseded ISBN 978 0 580 52969 6 86.00 members, 172.00 non-members
GSE/30
BRITISH STANDARDS
The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: 020 7467 7100 Fax: 020 7255 1472 Email: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members.
BS EN ISO 3211:2010
Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation supersedes BS EN 12373-15:2001 ISBN 978 0 580 65993 5 35.00 members, 70.00 non-members
STI/32
BS EN 3475-100:2010
Aerospace series. Cables, electrical, aircraft use. Test methods. General supersedes BS EN 3475-100:2002 ISBN 978 0 580 64916 5 43.00 members, 86.00 non-members
ACE/6
BS 11000-1:2010
Collaborative business relationships. A framework specification supersedes PAS 11000:2006 which remains current ISBN 978 0 580 69562 9 81.00 members, 162.00 non-members
SVS/1/4
BS EN ISO 4180:2010
Packaging. Complete, filled transport packages. General rules for the compilation of performance test schedules supersedes BS EN 24180-1:1993 and BS EN 241802:1993 ISBN 978 0 580 60139 2 62.00 members, 124.00 non-members
PKW/0/-/6
BS EN PUBLICATIONS
The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard.
BS EN ISO 4254-10:2009
Agricultural machinery. Safety. Rotary tedders and rakes no current standard is superseded ISBN 978 0 580 56154 2 81.00 members, 162.00 non-members
AGE/32
BS EN 4473:2010 BS EN 530:2010
Abrasion resistance of protective clothing material. Test methods supersedes BS EN 530:1995 ISBN 978 0 580 61873 4 43.00 members, 86.00 non-members
PH/3/5
Aerospace series. Aluminium pigmented coatings for fasteners. Technical specification no current standard is superseded ISBN 978 0 580 65104 5 43.00 members, 86.00 non-members
ACE/12
BS 2634-1:2010
Roughness comparison specimens. Specification for turned, ground, bored, milled, shaped and planed specimens supersedes BS 2634-1:1987 ISBN 978 0 580 69915 3 35.00 members, 70.00 non-members
TDW/4/9
BS EN 4700-002:2010 BS EN 1536:2010
Execution of special geotechnical works. Bored piles supersedes BS EN 1536:2000 ISBN 978 0 580 65238 7 93.00 members, 186.00 non-members
B/526
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Bar and section no current standard is superseded ISBN 978 0 580 53326 6 71.00 members, 142.00 non-members
ACE/61/-/48
BS 2634-2:2010
Roughness comparison specimens. Specification for spark-eroded, shot-blasted, grit-blasted and polished specimens supersedes BS 2634-2:1987 ISBN 978 0 580 69916 0 35.00 members, 70.00 non-members
TDW/4/9
BS EN 1538:2010
Execution of special geotechnical works. Diaphragm walls supersedes BS EN 1538:2000 ISBN 978 0 580 65239 4 86.00 members, 172.00 non-members
B/526
BS EN 4700-005:2010
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Forging stock no current standard is superseded ISBN 978 0 580 55075 1 62.00 members, 124.00 non-members
ACE/61/-/48
BS 6079-1:2010
Project management. Principles and guidelines for the management of projects supersedes BS 6079-1:2002 ISBN 978 0 580 59996 5 93.00 members, 186.00 non-members
MS/2
BS EN ISO 2128:2010
Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by splitbeam microscope supersedes BS EN 12373-3:1999 ISBN 978 0 580 65994 2 35.00 members, 70.00 non-members
STI/32
BS EN 4700-006:2010
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Preproduction and production forgings no current standard is superseded ISBN 978 0 580 55076 8 62.00 members, 124.00 non-members
ACE/61/-/48
BS EN Publications continued...
BS EN ISO 7759:2010
Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer supersedes BS EN 12373-13:2001 ISBN 978 0 580 65997 3 43.00 members, 86.00 non-members
STI/32
BS EN ISO 13349:2010
Fans. Vocabulary and definitions of categories supersedes BS EN ISO 13349:2008 ISBN 978 0 580 63396 6 86.00 members, 172.00 non-members
MCE/17
BS EN 15757:2010
Conservation of cultural property. Specifications for temperature and relative humidity to limit climate-induced mechanical damage in organic hygroscopic materials no current standard is superseded ISBN 978 0 580 60906 0 43.00 members, 86.00 non-members
B/560
BS EN 13477-2:2010
Non-destructive testing. Acoustic emission. Equipment characterisation. Verification of operating characteristic supersedes BS EN 13477-2:2001 ISBN 978 0 580 61010 3 71.00 members, 142.00 non-members
WEE/46
BS EN ISO 7963:2010
Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2 supersedes BS EN 27963:1992 ISBN 978 0 580 70835 0 43.00 members, 86.00 non-members
WEE/46
BS EN 15758:2010
Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects no current standard is superseded ISBN 978 0 580 60907 7 43.00 members, 86.00 non-members
B/560
BS EN ISO 13680:2010
Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions supersedes BS EN ISO 13680:2008 which remains current ISBN 978 0 580 70775 9 93.00 members, 186.00 non-members
PSE/17/-/5
BS EN ISO 8362-2:2010
Injection containers and accessories. Closures for injection vials supersedes BS EN 28362-2:1993 ISBN 978 0 580 56904 3 35.00 members, 70.00 non-members
CH/212
BS EN 15767-3:2010
Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors. Foam devices no current standard is superseded ISBN 978 0 580 64649 2 62.00 members, 124.00 non-members
FSH/17/8
BS EN ISO 9554:2010
Fibre ropes. General specifications supersedes BS EN ISO 9554:2005 ISBN 978 0 580 64420 7 62.00 members, 124.00 non-members
TCI/77
BS EN ISO 13720:2010
Meat and meat products. Enumeration of presumptive Pseudomonas spp. supersedes BS 7857-1:1996 ISBN 978 0 580 61033 2 43.00 members, 86.00 non-members
AW/9
BS EN ISO 19879:2010
Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections supersedes BS EN ISO 19879:2005 ISBN 978 0 580 70344 7 62.00 members, 124.00 non-members
MCE/18/-/4
BS EN ISO 10993-13:2010
Biological evaluation of medical devices. Identification and quantification of degradation products from polymeric medical devices supersedes BS EN ISO 10993-13:2009 ISBN 978 0 580 57719 2 62.00 members, 124.00 non-members
CH/194
BS EN ISO 15001:2010
Anaesthetic and respiratory equipment. Compatibility with oxygen supersedes BS EN ISO 15001:2004 ISBN 978 0 580 61769 0 86.00 members, 172.00 non-members
CH/121/6
BS EN ISO 21457:2010
Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems no current standard is superseded ISBN 978 0 580 59223 2 81.00 members, 162.00 non-members
PSE/17/-/7
BS EN ISO 11609:2010
Dentistry. Dentifrices. Requirements, test methods and marking supersedes BS EN ISO 11609:1998 ISBN 978 0 580 59583 7 62.00 members, 124.00 non-members
CH/106/7
BS EN ISO/IEC 15419:2010
Information technology. Automatic identification and data capture techniques. Bar code digital imaging and printing performance testing supersedes BS EN ISO/IEC 15419:2002 ISBN 978 0 580 62688 3 71.00 members, 142.00 non-members
IST/34
BS EN ISO 28781:2010
Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment no current standard is superseded ISBN 978 0 580 57552 5 86.00 members, 172.00 non-members
PSE/17/-/4
BS EN 13141-2:2010
Ventilation for buildings. Performance testing of components/products for residential ventilation. Exhaust and supply air terminal devices supersedes BS EN 13141-2:2004 ISBN 978 0 580 61453 8 62.00 members, 124.00 non-members
RHE/2
BS EN ISO 15423:2010
Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing supersedes BS EN ISO/IEC 15423:2005 ISBN 978 0 580 62963 1 81.00 members, 162.00 non-members
IST/37
BS EN 50206-1:2010
Railway applications. Rolling stock. Pantographs. Characteristics and tests. Pantographs for main line vehicles supersedes BS EN 50206-1:1998 ISBN 978 0 580 63413 0 62.00 members, 124.00 non-members
GEL/9/2
BS EN 13245-3:2010
Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications. Designation of PVC-UE profiles supersedes BS 7619:1993 ISBN 978 0 580 54281 7 62.00 members, 124.00 non-members
PRI/82
BS EN 15725:2010
Extended application reports on the fire performance of construction products and building elements no current standard is superseded ISBN 978 0 580 59959 0 62.00 members, 124.00 non-members
FSH/22
10
BS EN 50325-5:2010
Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces. Functional safety communication based on EN 50325-4 no current standard is superseded ISBN 978 0 580 65883 9 71.00 members, 142.00 non-members
AMT/7
BS EN 61558-2-3:2010
Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for ignition transformers for gas and oil burners supersedes BS EN 61558-2-3:2000 which remains current ISBN 978 0 580 64543 3 62.00 members, 124.00 non-members
PEL/96
BS EN 61784-3-12:2010
Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 12 no current standard is superseded ISBN 978 0 580 72032 1 98.00 members, 196.00 non-members
AMT/7
BS EN 50495:2010
Safety devices required for the safe functioning of equipment with respect to explosion risks no current standard is superseded ISBN 978 0 580 70994 4 71.00 members, 142.00 non-members
GEL/31
BS EN 61784-3-13:2010 BS EN 61558-2-5:2010
Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units supersedes BS EN 61558-2-5:1998 which remains current ISBN 978 0 580 64544 0 43.00 members, 86.00 non-members
PEL/96
Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 13 no current standard is superseded ISBN 978 0 580 72033 8 117.00 members, 234.00 non-members
AMT/7
BS EN 60079-15:2010
Explosive atmospheres. Equipment protection by type of protection n supersedes BS EN 60079-15:2005 ISBN 978 0 580 59523 3 93.00 members, 186.00 non-members
GEL/31/14
BS EN 61784-3-14:2010
Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 14 no current standard is superseded ISBN 978 0 580 72034 5 93.00 members, 186.00 non-members
AMT/7
BS EN 61784-3-1:2010
Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 1 supersedes BS EN 61784-3-1:2008 ISBN 978 0 580 72027 7 93.00 members, 186.00 non-members
AMT/7
BS EN 60079-18:2009
Explosive atmospheres. Equipment protection by encapsulation m supersedes BS EN 60079-18:2004 and BS EN 6124118:2004 ISBN 978 0 580 56290 7 71.00 members, 142.00 non-members
GEL/31/17
BS EN 61788-14:2010
Superconductivity. Superconducting power devices. General requirements for characteristic tests of current leads designed for powering superconducting devices no current standard is superseded ISBN 978 0 580 64252 4 62.00 members, 124.00 non-members
L/-/90
BS EN 60079-20-1:2010
Explosive atmospheres. Material characteristics for gas and vapour classification. Test methods and data supersedes PD IEC 60079-20:2000 ISBN 978 0 580 61542 9 93.00 members, 186.00 non-members
GEL/31
BS EN 61784-3-2:2010
Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 2 supersedes BS EN 61784-3-2:2008 ISBN 978 0 580 72028 4 134.00 members, 268.00 non-members
AMT/7
BS EN 60079-31:2009
Explosive atmospheres. Equipment dust ignition protection by enclosure t supersedes BS EN 61241-1:2004 ISBN 978 0 580 57359 0 43.00 members, 86.00 non-members
GEL/31/20
BS EN 61935-2:2010 BS EN 61784-3-3:2010
Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 3 supersedes BS EN 61784-3-3:2008 ISBN 978 0 580 72029 1 112.00 members, 224.00 non-members
AMT/7
Specification for the testing of balanced and coaxial information technology cabling. Cords as specified in ISO/IEC 11801 and related standards supersedes BS EN 61935-2:2005 ISBN 978 0 580 56602 8 71.00 members, 142.00 non-members
EPL/46
BS EN 60335-2-27:2010
Household and similar electrical appliances. Safety. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation supersedes BS EN 60335-2-27:2003 which remains current ISBN 978 0 580 68062 5 71.00 members, 142.00 non-members
CPL/61/1
BS EN 61784-3-6:2010
Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 6 supersedes BS EN 61784-3-6:2008 ISBN 978 0 580 72030 7 93.00 members, 186.00 non-members
AMT/7
BS EN 62490-1:2010
ESL measuring method. Capacitors with lead terminal for use in electronic equipment no current standard is superseded ISBN 978 0 580 57797 0 43.00 members, 86.00 non-members
EPL/40X
BS EN 60794-3-11:2010
Optical fibre cables. Outdoor cables. Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables no current standard is superseded ISBN 978 0 580 66571 4 71.00 members, 142.00 non-members
GEL/86/1
BS EN 61784-3-8:2010
Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 8 no current standard is superseded ISBN 978 0 580 72031 4 81.00 members, 162.00 non-members
AMT/7
BS EN 62490-2:2010
ESL measuring method. Surface mount capacitors for use in electronic equipment no current standard is superseded ISBN 978 0 580 63321 8 43.00 members, 86.00 non-members
EPL/40X
11
BS ISO 5610-8:2010
Tool holders with rectangular shank for indexable inserts. Style K supersedes BS 4193-7:1999 ISBN 978 0 580 58866 2 43.00 members, 86.00 non-members
MTE/18
BS ISO 5610-9:2010
Tool holders with rectangular shank for indexable inserts. Style L supersedes BS 4193-7:1999 ISBN 978 0 580 58867 9 43.00 members, 86.00 non-members
MTE/18
Tool holders with rectangular shank for indexable inserts. General survey, correlation and determination of dimensions supersedes BS 4193-7:1999 ISBN 978 0 580 58859 4 62.00 members, 124.00 non-members
MTE/18
BS ISO 5610-2:2010
Tool holders with rectangular shank for indexable inserts. Style A supersedes BS 4193-7:1999 ISBN 978 0 580 58860 0 43.00 members, 86.00 non-members
MTE/18
Tool holders with rectangular shank for indexable inserts. Style N supersedes BS 4193-7:1999 ISBN 978 0 580 58868 6 43.00 members, 86.00 non-members
MTE/18
BS ISO 5610-11:2010
BS IMPLEMENTATIONS
BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard.
BS ISO 5610-3:2010
Tool holders with rectangular shank for indexable inserts. Style B supersedes BS 4193-7:1999 ISBN 978 0 580 58861 7 43.00 members, 86.00 non-members
MTE/18
Tool holders with rectangular shank for indexable inserts. Style R supersedes BS 4193-7:1999 ISBN 978 0 580 58869 3 43.00 members, 86.00 non-members
MTE/18
BS ISO 5610-4:2010
Tool holders with rectangular shank for indexable inserts. Style D supersedes BS 4193-7:1999 ISBN 978 0 580 58862 4 43.00 members, 86.00 non-members
MTE/18
BS ISO 5610-12:2010
Tool holders with rectangular shank for indexable inserts. Style S supersedes BS 4193-7:1999 ISBN 978 0 580 58870 9 43.00 members, 86.00 non-members
MTE/18
BS ISO 48:2010
Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD) supersedes BS ISO 48:2007 ISBN 978 0 580 69658 9 71.00 members, 142.00 non-members
PRI/22
BS ISO 5610-5:2010
Tool holders with rectangular shank for indexable inserts. Style F supersedes BS 4193-7:1999 ISBN 978 0 580 58863 1 43.00 members, 86.00 non-members
MTE/18
BS ISO 5610-13:2010
Tool holders with rectangular shank for indexable inserts. Style T supersedes BS 4193-7:1999 ISBN 978 0 580 58871 6 43.00 members, 86.00 non-members
MTE/18
BS ISO 105-F10:1989+A1:2009
Textiles. Tests for colour fastness. Specification for adjacent fabric. Multifibre no current standard is superseded ISBN 978 0 580 65852 5 35.00 members, 70.00 non-members
TCI/81
BS ISO 5610-6:2010
Tool holders with rectangular shank for indexable inserts. Style G supersedes BS 4193-7:1999 ISBN 978 0 580 58864 8 43.00 members, 86.00 non-members
MTE/18
BS ISO 5610-14:2010
Tool holders with rectangular shank for indexable inserts. Style H supersedes BS 4193-7:1999 ISBN 978 0 580 58872 3 43.00 members, 86.00 non-members
MTE/18
BS ISO 1726-3:2010
Road vehicles. Mechanical couplings between tractors and semi-trailers. Requirements for semi-trailer contact area to fifth wheel no current standard is superseded ISBN 978 0 580 58734 4 35.00 members, 70.00 non-members
AUE/13
BS ISO 5610-7:2010
Tool holders with rectangular shank for indexable inserts. Style J supersedes BS 4193-7:1999 ISBN 978 0 580 58865 5 43.00 members, 86.00 non-members
MTE/18
BS ISO 5610-15:2010
Tool holders with rectangular shank for indexable inserts. Style V supersedes BS 4193-7:1999 ISBN 978 0 580 58873 0 35.00 members, 70.00 non-members
MTE/18
12
BS Implementations continued...
BS ISO 8769:2010
Reference sources. Calibration of surface contamination monitors. Alpha-, beta- and photon emitters no current standard is superseded ISBN 978 0 580 72936 2 62.00 members, 124.00 non-members
NCE/2
BS ISO 11790:2010
Copper, lead, zinc and nickel concentrates. Guidelines for the inspection of mechanical sampling systems no current standard is superseded ISBN 978 0 580 67747 2 62.00 members, 124.00 non-members
NFE/36
BS ISO 17712:2010
Freight containers. Mechanical seals supersedes DD ISO/PAS 17712:2006 ISBN 978 0 580 58150 2 71.00 members, 142.00 non-members
TW/1
BS ISO 12573:2010
Aircraft. Tubing tolerances. Inch series no current standard is superseded ISBN 978 0 580 64200 5 43.00 members, 86.00 non-members
ACE/69
Plastics. Epoxy resins. Test methods supersedes BS ISO 18280:2005 ISBN 978 0 580 65167 0 43.00 members, 86.00 non-members
PRI/42
BS ISO 18911:2010
Imaging materials. Processed safety photographic films. Storage practices supersedes BS ISO 18911:2000 ISBN 978 0 580 59918 7 71.00 members, 142.00 non-members
CPW/42
Radiofrequency identification of animals. Advanced transponders. Code and command structure no current standard is superseded ISBN 978 0 580 57468 9 81.00 members, 162.00 non-members
AGE/6/1
BS ISO/IEC 14443-2:2010
Identification cards. Contactless integrated circuit cards. Proximity cards. Radio frequency power and signal interface supersedes BS ISO/IEC 14443-2:2001+A1:2005 ISBN 978 0 580 58701 6 71.00 members, 142.00 non-members
IST/17
BS ISO 19250:2010
Water quality. Detection of Salmonella spp. no current standard is superseded ISBN 978 0 580 53204 7 71.00 members, 142.00 non-members
EH/3/4
BS ISO 10668:2010
Brand valuation. Requirements for monetary brand valuation no current standard is superseded ISBN 978 0 580 64260 9 43.00 members, 86.00 non-members
SVS/12
BS ISO 11026:2010
Heavy commercial vehicles and buses. Test method for roll stability. Closing-curve test no current standard is superseded ISBN 978 0 580 66380 2 62.00 members, 124.00 non-members
AUE/15
Information technology. Metamodel framework for interoperability (MFI). Metamodel for ontology registration supersedes BS ISO/IEC 19763-3:2007 ISBN 978 0 580 63568 7 81.00 members, 162.00 non-members
IST/40
BS ISO 11452-11:2010
Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Reverberation chamber no current standard is superseded ISBN 978 0 580 60625 0 71.00 members, 142.00 non-members
AUE/16
BS ISO 15031-2:2010
Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Guidance on terms, definitions, abbreviations and acronyms no current standard is superseded ISBN 978 0 580 63279 2 43.00 members, 86.00 non-members
AUE/16
BS ISO 24101-2:2010
Intelligent transport systems. Communications access for land mobiles (CALM). Application management. Conformance test no current standard is superseded ISBN 978 0 580 65781 8 86.00 members, 172.00 non-members
EPL/278
BS ISO 15686-10:2010
Buildings and constructed assets. Service life planning. When to assess functional performance no current standard is superseded ISBN 978 0 580 54360 9 81.00 members, 162.00 non-members
CB/101
Information technology. Automatic identification and data capture techniques. GS1 composite bar code symbology specification supersedes BS ISO/IEC 24723:2006 ISBN 978 0 580 71971 4 86.00 members, 172.00 non-members
IST/34
BS ISO 11745:2010
Brazing for aerospace applications. Qualification test for brazers and brazing operators. Brazing of metallic components no current standard is superseded ISBN 978 0 580 62132 1 62.00 members, 124.00 non-members
WEE/-/1
BS ISO 15893:2010
Space data and information transfer systems. Space communications protocol specification (SCPS). Transport protocol (SCPS-TP) no current standard is superseded ISBN 978 0 580 59774 9 112.00 members, 224.00 non-members
ACE/68/-/7
BS ISO/IEC 25045:2010
Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). Evaluation module for recoverability no current standard is superseded ISBN 978 0 580 66893 7 81.00 members, 162.00 non-members
IST/15
14
BS ISO 26022:2010
Road vehicles. Ergonomic aspects of transport information and control systems. Simulated lane change test to assess in-vehicle secondary task demand no current standard is superseded ISBN 978 0 580 58376 6 86.00 members, 172.00 non-members
AUE/12
PUBLISHED DOCUMENTS
PD CEN/TR 15729:2010
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Report on the determination of mean abrasion after a defined number of test cycles no current standard is superseded ISBN 978 0 580 60021 0 43.00 members, 86.00 non-members
PRI/88/2
PD IEC/TR 62630:2010
Guidance for evaluating exposure from multiple electromagnetic sources no current standard is superseded ISBN 978 0 580 67860 8 81.00 members, 162.00 non-members
GEL/106
BS ISO 26870:2009
Space systems. Launch pad and integration site operational documents no current standard is superseded ISBN 978 0 580 57805 2 62.00 members, 124.00 non-members
ACE/68/-/3
PD CEN/TR 16017:2010
Guide to the use of EN 598 no current standard is superseded ISBN 978 0 580 69117 1 43.00 members, 86.00 non-members
PSE/10
DD ISO/TS 10004:2010
Quality management. Customer satisfaction. Guidelines for monitoring and measuring no current standard is superseded ISBN 978 0 580 59353 6 44.00 members, 88.00 non-members
QS/1
BS ISO 28343:2010
Rubber compounding ingredients. Process oils. Determination of glass transition temperature by DSC no current standard is superseded ISBN 978 0 580 59106 8 43.00 members, 86.00 non-members
PRI/23
DD ISO/TS 10867:2010
Nanotechnologies. Characterization of singlewall carbon nanotubes using near infrared photoluminescence spectroscopy no current standard is superseded ISBN 978 0 580 61382 1 36.00 members, 72.00 non-members
NTI/1
BS ISO/IEC 29159-1:2010
Information technology. Biometric calibration, augmentation and fusion data. Fusion information format no current standard is superseded ISBN 978 0 580 68459 3 71.00 members, 142.00 non-members
IST/44
PD 25111:2010
Business continuity management. Guidance on human aspects of business continuity no current standard is superseded ISBN 978 0 580 71975 2 95.00 members, 95.00 non-members
BCM/1
DD ISO/TS 16610-28:2010
Geometrical product specifications (GPS). Filtration. Profile filters. End effects no current standard is superseded ISBN 978 0 580 66342 0 36.00 members, 72.00 non-members
TDW/4
BS ISO 29990:2010
Learning services for non-formal education and training. Basic requirements for service providers no current standard is superseded ISBN 978 0 580 66199 0 62.00 members, 124.00 non-members
SVS/10
PD IEC/TR 62061-1:2010
Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery no current standard is superseded ISBN 978 0 580 72793 1 62.00 members, 124.00 non-members
MCE/3
DD ISO/TS 16610-31:2010
Geometrical product specifications (GPS). Filtration. Robust profile filters. Gaussian regression filters no current standard is superseded ISBN 978 0 580 57486 3 36.00 members, 72.00 non-members
TDW/4
BS IEC 60462:2010
Nuclear instrumentation. Photomultiplier tubes for scintillation counting. Test procedures no current standard is superseded ISBN 978 0 580 61287 9 62.00 members, 124.00 non-members
NCE/2
ISO/TC 199 and IEC/TC 44 have jointly developed this Technical Report in support of the application of ISO 13849-1 and IEC 62061. However, these bodies have opted to publish the guide separately. The resulting publications are ISO/TR 23849:2010 and IEC/TR 62061-1:2010, which are technically identical in content
BS IEC 61892-5:2010
Mobile and fixed offshore units. Electrical installations. Mobile units supersedes BS IEC 61892-5:2000 ISBN 978 0 580 67921 6 71.00 members, 142.00 non-members
JPEL/18
Electronic fee collection. Application interface definition for autonomous systems. Charging no current standard is superseded ISBN 978 0 580 65001 7 44.00 members, 88.00 non-members
EPL/278
Electronic fee collection. Application interface definition for autonomous systems. Communication and connection to the lower layers no current standard is superseded ISBN 978 0 580 65009 3 44.00 members, 88.00 non-members
EPL/278
15
BS EN ISO 20565-1:2008
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Apparatus, reagents, dissolution and determination of gravimetric silica CORRIGENDUM 1
RPI/1
DD ISO/TS 26873:2010
Plastics pipes and fittings. Definition and construction procedures for reference lines no current standard is superseded ISBN 978 0 580 64291 3 17.00 members, 34.00 non-members
PRI/88/4
BS EN ISO 20565-2:2008
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Wet chemical analysis CORRIGENDUM 1
RPI/1
DD ISO/TS 29001:2010
Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations supersedes PD ISO/TS 29001:2007 ISBN 978 0 580 69494 3 63.00 members, 126.00 non-members
PSE/17
BS EN ISO 20565-3:2008
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) CORRIGENDUM 1
RPI/1
BS EN 10226-1:2004
Pipe threads where pressure tight joints are made on the threads. Taper external threads and parallel internal threads. Dimensions, tolerances and designation CORRIGENDUM 1
ISE/110
AEROSPACE SERIES
BS 3F 128:2010
Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex) supersedes BS 2F 128:1992+A1:2002 ISBN 978 0 580 68999 4 43.00 members, 86.00 non-members
ACE/65
BS EN 50132-1:2010
Alarm systems. CCTV surveillance systems for use in security applications. System requirements CORRIGENDUM 1
GW/1/10
BS EN 12352:2006
Traffic control equipment. Warning and safety light devices CORRIGENDUM 3
EPL/526
BS EN 60079-30-1:2007
Explosive atmospheres. Electrical resistance trace heating. General and testing requirements CORRIGENDUM 1
GEL/31/14
BS EN ISO 14025:2010
Environmental labels and declarations. Type III environmental declarations. Principles and procedures CORRIGENDUM 1
SES/1/3
BS EN 60079-30-2:2007
Explosive atmospheres. Electrical resistance trace heating. Application guide for design, installation and maintenance CORRIGENDUM 1
GEL/31/14
BS EN 14399-7:2007
High-strength structural bolting assemblies for preloading. System HR. Countersunk head bolt and nut assemblies CORRIGENDUM 1
FME/9/1
BS EN 60512-21-1:2010
Connectors for electronic equipment. Tests and measurements. R.F. resistance tests. Test 21a. R.F. shunt resistance CORRIGENDUM 1
EPL/48
PAS 96:2010
Defending food and drink. Guidance for the deterrence, detection and defeat of ideologically motivated and other forms of malicious attack on food and drink and their supply arrangements supersedes PAS 96:2008 ISBN 978 0 580 70039 2 Only available as a free download from http://shop.bsigroup.com/pas96
BS EN 14399-8:2007
High-strength structural bolting assemblies for preloading. System HV. Hexagon fit bolt and nut assemblies CORRIGENDUM 1
FME/9/1
BS EN 60950-1:2006+A1:2010
Information technology equipment. Safety. General requirements CORRIGENDUM 3
EPL/108
BS EN ISO/IEC 15438:2010
Information technology. Automatic identification and data capture techniques. PDF417 bar code symbology specification CORRIGENDUM 1
IST/34
BS EN 62395-1:2006 BS EN 15566:2009
Railway applications. Railway rolling stock. Draw gear and screw coupling CORRIGENDUM 1
RAE/1
http://shop.bsigroup.com/BSOL
Electrical resistance trace heating systems for industrial and commercial applications. General and testing requirements CORRIGENDUM 1
PEL/27
16
BS ISO 4701:2008
Iron ores and direct reduced iron. Determination of size distribution by sieving CORRIGENDUM 1
ISE/58
BS EN ISO 13628-1:2005+A1:2010
Petroleum and natural gas industries. Design and operation of subsea production systems. General requirements and recommendations AMENDMENT 1 134.00 members, 268.00 non-members
PSE/17/-/4
BS ISO 11093-5:2009
Paper and board. Testing of cores. Determination of characteristics of concentric rotation CORRIGENDUM 1
PAI/11
BS EN 50329:2003+A1:2010
Railway applications. Fixed installations. Traction transformers AMENDMENT 1 71.00 members, 142.00 non-members
GEL/9/3
BS IEC 61710:2000
Power law model. Goodness-of-fit tests and estimation methods CORRIGENDUM 1
DS/1
BS EN 61000-4-18:2007+A1:2010
Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test AMENDMENT 1 71.00 members, 142.00 non-members
GEL/210/12
DD IEC/TS 62395-2:2008
Electrical resistance trace heating systems for industrial and commercial applications. Application guide for system design, installation and maintenance CORRIGENDUM 1
PEL/27
BS 1251:1987
Specification for open-fireplace components
PD 5500:2009+A2:2010
Specification for unfired fusion welded pressure vessels
RHE/28
BS 3986-2:1998
Methods of test for drying performance of agricultural grain dryers. Additional procedures and crop specific requirements
AGE/32
SPECIAL ANNOUNCEMENTS
Comments can be sent by email or by post to named contacts at: BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000
BS 493:1995+A1:2010
Specification for airbricks and gratings for wall ventilation AMENDMENT 1 35.00 members, 70.00 non-members
B/519/1
BS 5200:1997
Specification for dimensions of hydraulic connectors and adaptors This standard was incorrectly announced in the October edition of Update Standards as withdrawn. The correct status for this standard should be confirmed. Contact: Sarah ONeil-Shaw Email: sarah.oneil-shaw@bsigroup.com
MCE/18
BS EN 957-4:2006+A1:2010
Stationary training equipment. Strength training benches, additional specific safety requirements and test methods AMENDMENT 1 35.00 members, 70.00 non-members
SW/136/4
BS 5200:1997 BS EN 60950-1:2006
Information technology equipment. Safety. General requirements Specification for dimensions of hydraulic connectors and adaptors
MCE/18
BS EN 12966-1:2005+A1:2009
Road vertical signs. Variable message traffic signs. Product standard AMENDMENT 1 93.00 members, 186.00 non-members
B/509/3
This standard has been re-instated, as it was withdrawn in error. Contact: Simon Merriman Email: simon.merriman@bsigroup.com
EPL/108
BS EN 433:1994
Resilient floor coverings. Determination of residual indentation after static loading
PRI/60
17
BS EN 12104:2000
Resilient floor coverings. Cork floor tiles. Specification
PRI/60
BS ISO 12319:2006
Aerospace. P (loop style) clamps. Procurement specification
ACE/69
BS EN 662:1995
Resilient floor coverings. Determination of curling on exposure to moisture
PRI/60
BS EN 12105:1998
Resilient floor coverings. Determination of moisture content of agglomerated composition cork
PRI/60
BS ISO 15706-1:2002+A1:2008
Information and documentation. International Standard Audiovisual Number (ISAN). Audiovisual work identifier
IDT/2/18
BS EN 663:1995
Resilient floor coverings. Determination of conventional pattern depths
PRI/60
BS EN 12455:1999
Resilient floor coverings. Specification for corkment underlay
PRI/60
BS ISO 15706-2:2007
Information and documentation. International Standard Audiovisual Number (ISAN). Version identifier
IDT/2/18
BS EN 664:1995
Resilient floor coverings. Determination of volatile loss
PRI/60
BS EN 13845:2005
Resilient floor coverings. Polyvinyl chloride floor coverings with particle based enhanced slip resistance. Specification
PRI/60
BS ISO 15707:2001
Information and documentation. International standard musical work code (ISWC)
IDT/2/18
BS EN 665:1995
Resilient floor coverings. Determination of exudation of plasticizers
PRI/60
BS EN 14521:2004
Resilient floor coverings. Specification for smooth rubber floor coverings with or without foam backing with a decorative layer
PRI/60
BS ISO 16031-1:2002
Aerospace fluid systems. O-rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes. Close tolerances for hydraulic systems
ACE/69
BS EN 666:1995
Resilient floor coverings. Determination of gelling
PRI/60
BS EN 14565:2004
Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification
PRI/60
BS ISO 16031-2:2003
Aerospace fluid systems. O-rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes. Standard tolerances for non-hydraulic systems
ACE/69
BS EN 986:2005
Textile floor coverings. Tiles. Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
PRI/3
BS EN 14900:2006
Textile floor coverings. Determination of the density of the textile fleece backing
PRI/3
BS ISO 17775:2006
Aircraft. Ground-service connections. Potable water, toilet-flush water and toilet drain
ACE/69
BS EN 1081:1998
Resilient floor coverings. Determination of the electrical resistance
PRI/60
BS ISO 3901:2001
Information and documentation. International Standard Recording Code (ISRC)
IDT/2/18
BS ISO 23933:2006
Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 C/20684 kPa (275 F/3000 psi) and 135 C/21000 kPa (275 F/3046 psi). Procurement specification
ACE/69
BS EN 1318:2005
Textile floor coverings. Determination of the apparent effective thickness of the backing
PRI/3
BS ISO 7314:2002
Aerospace. Fluid systems. Metal hose assemblies
ACE/69
BS ISO 23935:2006
Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones
ACE/69
BS ISO 8829-2:2006
Aerospace. Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies. Non-metallic braid
ACE/69
BS IEC 62526:2007
Standard for extensions to standard test interface language (STIL) for semiconductor design environments
GEL/93
BS EN 1815:1998
Resilient and textile floor coverings. Assessment of static electrical propensity
PRI/60
Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 F/3000 psi (204 C/20684 kPa) and 204 C/21000 kPa (400 F/3046 psi). Procurement specification
ACE/69
BS IEC 62528:2007
Standard testability method for embedded core-based integrated circuits
GEL/93
BS EN 12103:1999
Resilient floor coverings. Agglomerated cork underlays. Specification
PRI/60
BS ISO 9679:2006
Aerospace. Clamps for fluid systems. Test methods
ACE/69
18
BS 1902-2.2:1974
Methods of testing refractory materials. Chemical analysis (wet methods). Chemical analysis of chrome-bearing materials
RPI/1
BS 2618:1975
Specification for electric traction equipment
GEL/9
BS 2869:2006
Fuel oils for agricultural, domestic and industrial engines and boilers. Specification
PTI/2
Superseded by BS 2869:2010
BS 2782-11:Method 1112A:1989
Methods of testing plastics. Thermoplastics pipes, fittings and valves. Leaktightness of thermoplastics pipes and fittings for nonpressure applications
PRI/88
Superseded by BS ISO 5610-1:2010, BS ISO 56102:2010, BS ISO 5610-3:2010, BS ISO 5610-4:2010, BS ISO 5610-5:2010, BS ISO 5610-6:2010, BS ISO 5610-7:2010, BS ISO 5610-8:2010, BS ISO 5610-9:2010, BS ISO 5610-10:2010, BS ISO 5610-11:2010, BS ISO 5610-12:2010, BS ISO 5610-13:2010, BS ISO 5610-14:2010 and BS ISO 5610-15:2010
This standard was partially superseded by dual numbered standards BS EN 1053:1996, BS 278211:Method 1112B:1996 and BS EN 1277:1996, BS 2782-11:Methods 1112L M N and Q:1996. The clauses which remained current are no longer considered relevant and are now proposed for withdrawal
DD ENV 12718:2001
Medical compression hosiery
CH/205/1
BS 4994:1987
Specification for design and construction of vessels and tanks in reinforced plastics
PRI/5/1
This standard has been proposed for withdrawal as the corresponding European standard has been withdrawn
This standard has been proposed for withdrawal as the corresponding European standard has been withdrawn
19
BS EN 60730-2-11:1994
Specification for automatic electrical controls for household and similar use. Particular requirements. Energy regulators
CPL/72
Superseded by BS EN 60730-2-11:2008
Automatic electrical controls for household and similar use. Particular requirements for humidity sensing controls
CPL/72
Superseded by BS EN 60730-2-13:2008
Specification for circuit-breakers for overcurrent protection for household and similar installations
PEL/23/1
Superseded by BS EN 60898-1:2003+A1:2004
BS EN 60947-2:2006 BS EN 50017:1994
Electrical apparatus for potentially explosive atmospheres. Powder filling q
GEL/31/17
This standard has been withdrawn as the corresponding CEN and ISO standards have been withdrawn
Superseded by BS EN 60947-2:2006+A1:2009
Superseded by BS EN 50017:1998
BS EN 60947-5-2:1999 BS EN 12373-3:1999
Aluminium and aluminium alloys. Anodizing. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by splitbeam microscope
STI/32
BS EN 50017:1998
Electrical apparatus for potentially explosive atmospheres. Powder filling q
GEL/31/17
Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Proximity switches
PEL/17/2
Superseded by BS EN 60079-5:2007
Superseded by BS EN 60947-5-2:2007
BS EN 50073:1999
Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
GEL/31/19
BS EN 61241-1:2004
Electrical apparatus for use in the presence of combustible dust. Protection by enclosures tD
GEL/31/20
BS EN 12373-13:2001
Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
STI/32
Superseded by BS EN 60079-31:2009
Superseded by BS EN 60079-29-2:2007
BS EN 61241-18:2004 BS EN 60034-2:1999
Rotating electrical machines. Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)
PEL/2
Electrical apparatus for use in the presence of combustible dust. Protection by encapsulation mD
GEL/31/20
BS EN 12373-15:2001
Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
STI/32
Superseded by BS EN 60079-18:2009
Superseded by BS EN 60034-2-1:2007
BS EN 61779-1:2000
Electrical apparatus for the detection and measurement of flammable gases. General requirements and test methods
GEL/31/19
PD CEN/TR 14548:2003
Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
PRI/52
Superseded by BS EN 60079-29-1:2007
Superseded by BS EN 60086-4:2007
BS EN 61779-2:2000
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in the air
GEL/31/19
BS EN 60335-2-76:2005
Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers
CPL/61/01
This standard has been withdrawn as the corresponding European Standard has also been withdrawn
Superseded by BS EN 60079-29-1:2007
Superseded by BS EN 60335-2-76:2005+A1:2006
BS EN 61779-3:2000 BS EN 60601-2-37:2001
Medical electrical equipment. Particular requirements for the safety of ultrasonic diagnostic and monitoring equipment
CH/62/2
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air
GEL/31/19
Superseded by BS EN 60601-2-37:2008
Superseded by BS EN 60079-29-1:2007
20
BS EN 61779-4:2000
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit
GEL/31/19
BS EN 10228-2:1998
Non-destructive testing of steel forgings. Penetrant testing
ISE/111
Superseded by BS EN 60079-29-1:2007
BS EN 10228-3:1998
Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings
ISE/111
BS EN 61779-5:2000
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group II apparatus indicating a volume fraction up to 100% gas
GEL/31/19
BS EN 10228-4:1999
Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austeniticferritic stainless steel forgings
ISE/111
Superseded by BS EN 60079-29-1:2007
BS EN 62271-2:2003
High-voltage switchgear and controlgear. Seismic qualification for rated voltages of 72,5 kV and above
PEL/17/1
BS EN 1559-2:2000
Founding. Technical conditions of delivery. Additional requirements for steel castings
ISE/111
BS EN 10243-1:1999
Steel die forgings. Tolerances on dimensions. Drop and vertical press forgings
ISE/111
Superseded by BS EN 62271-207:2007
DD ISO/PAS 17712:2006
Freight containers. Mechanical seals
TW/1
BS EN 10031:2003
Semi finished products for forging. Tolerances on dimensions shape and mass
ISE/111
BS EN 10243-2:1999
Steel die forgings. Tolerances on dimensions. Upset forgings made on horizontal forging machines
ISE/111
PD ISO/TR 20573:2006
Footwear. Performance requirements for components for footwear. Heels and top pieces
TCI/69
BS EN 10222-1:1998
Steel forgings for pressure purposes. General requirements for open die forgings
ISE/111
BS EN 10250-1:1999
Open steel die forgings for general engineering purposes. General requirements
ISE/111
PD ISO/TS 29001:2007
Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations
PSE/17
BS EN 10222-2:2000
Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties
ISE/111
BS EN 10250-2:2000
Open steel die forgings for general engineering purposes. Non-alloy quality and special steels
ISE/111
PD IEC 60079-20:2000
Electrical apparatus for explosive gas atmospheres. Data for flammable gases and vapours, relating to the use of electrical apparatus
GEL/31
BS EN 10250-3:2000 BS EN 10222-3:1999
Steel forgings for pressure purposes. Nickel steels with specified low-temperature properties
ISE/111
Open steel die forgings for general engineering purposes. Alloy special steels
ISE/111
Superseded by BS EN 60079-20-1:2010
BS EN 10250-4:2000
Open steel die forgings for general engineering purposes. Stainless steels
Help Us to Help You! Always quote your Customer Number Dont know your number? Contact Customer Services 020 8996 9001 who will be happy to check it for you
BS EN 10222-4:1999
Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
ISE/111
ISE/111
BS EN 10254:1999
Steel closed die forgings. General technical delivery conditions
BS EN 10222-5:2000
Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
ISE/111
ISE/111
BS EN 10293:2005
Steel castings for general engineering uses
ISE/111
BS EN 10228-1:1999
Non-destructive testing of steel forgings. Magnetic particle inspection
ISE/111
BS EN 10295:2002
Heat resistant steel castings
ISE/111
21
EN ISO 11260
Soil quality. Determination of effective cation exchange capacity and base saturation level using barium chloride solution
EH/4
BS 8560
Code of practice on design for working at height
B/209
EN ISO 11611
Protective clothing for use in welding processes will supersede BS EN ISO 11611:2007
PH/3/2
EN 1591-5
Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method for full face gasketed joints
PSE/15
BS 8887-240
Design for manufacture, assembly, disassembly and end-of-life processing (MADE). Reconditioning
TDW/4/7
EN ISO 11612
Protective clothing. Clothing to protect against heat and flame will supersede BS EN ISO 11612:2008
PH/3/2
EN 1645-1
Leisure accommodation vehicles. Caravans. Habitation requirements relating to health and safety will supersede BS EN 1645-1:2004+A1:2008
B/511
BS 11000-2
Collaborative business relationships. Guide will partially supersede PAS 11000:2006
SVS/1/4
EN ISO 11640
Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing will supersede BS EN ISO 11640:1998
TCI/69
EN 1646-1
Leisure accommodation vehicles. Caravans. Habitation requirements relating to health and safety will supersede BS EN 1646-1:2004+A1:2008
B/511
EN 287-1
Qualification test of welders. Fusion welding. Steels will supersede BS EN 287-1:2004
WEE/29
EN ISO 11641
Leather. Tests for colour fastness. Colour fastness to perspiration will supersede BS EN ISO 11641:2003
TCI/69
EN 1730 EN 469
Protective clothing for firefighters. Requirements and test methods for protective clothing for firefighting will supersede BS EN 469:2005
PH/3/2
Furniture. Tables. Test methods for the determination of stability, strength and durability will supersede BS EN 1730:2000
FW/0/2
EN ISO 11642
Leather. Tests for colour fastness. Colour fastness to water will supersede BS EN ISO 11642:1998
TCI/69
EN 1815 EN 482
Workplace exposure. General requirements for the performance of procedures for the measurement of chemical agents will supersede BS EN 482:2006
EH/2/2
Resilient and textile floor coverings. Assessment of static electrical propensity will supersede BS EN 1815:1998
PRI/3/60
EN 12098-1
Controls for heating systems. Control equipment for hot water heating systems
RHE/16
EN 1838
Lighting applications. Emergency lighting
EN ISO 12127-1
Protective clothing. Protection against heat and flame. Test method. Determination of the contact heat transmission through protective clothing or its materials
PH/3/2
EN 693:2001+A1:2009/A2
Machine tools. Safety. Hydraulic presses
MTE/1/1
EN 1976 EN 890
Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate, liquid will supersede BS EN 890:2004
CII/59
Copper and copper alloys. Cast unwrought copper products will supersede BS EN 1976:1998
NFE/34
EN 12365-1
Building hardware. Gasket and weather stripping for doors, windows, shutters and curtain walling. Performance requirements and classification will supersede BS EN 12365-1:2003
B/538/4
Basic human body measurements for technological design. Statistical summaries of body measurements from individual ISO populations
PH/9/4
EN 12365-2
Building hardware. Gasket and weather stripping for doors, windows, shutters and curtain walling. Linear compression force test methods will supersede BS EN 12365-2:2003
B/538/4
22
EN 12365-3
Building hardware. Gasket and weather stripping for doors, windows, shutters and curtain walling. Deflection recovery test method will supersede BS EN 12365-3:2003
B/538/4
EN 13445-2:2009/A1
Unfired pressure vessels. Materials
PVE/1
EN ISO 15175
Soil quality. Characterization of soil related to groundwater protection
EH/4
EN 13445-2:2009/A2
Unfired pressure vessels. Materials
PVE/1
EN 15432-1
Winter and road service area maintenance equipment. Front-mounted equipment. Fixed front mounting plates will supersede BS EN 15432:2008
B/513
EN 12365-4
Building hardware. Gasket and weather stripping for doors, windows, shutters and curtain walling. Recovery after accelerated ageing test method will supersede BS EN 12365-4:2003
B/538/4
CEN/TR 13445-9
Unfired pressure vessels. Conformance of the EN 13445 series to ISO 16528
PVE/1
EN 15621
Animal feeding stuffs. Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES will supersede DD CEN/TS 15621:2007
AW/10
EN 13480-8:2007/A1
Metallic industrial piping. Additional requirements for aluminium and aluminium alloys
PVE/10
EN 12409:2008/A1
Plastics and rubber machines. Thermoforming machines. Safety requirements
MCE/3/2
EN 12599
Ventilation for buildings. Test procedures and measuring methods for handing over installed ventilation and air conditioning systems will supersede BS EN 12599:2000
RHE/2
EN 13852-1
Cranes. Offshore cranes. General purpose offshore cranes will supersede BS EN 13852-1:2004
MHE/3/10
EN ISO 15952
Soil quality. Effects of pollutants on juvenile land snails (helicidae). Determination of the effects on growth by soil contamination
EH/4
EN ISO 16050
Foodstuffs. Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products. High performance liquid chromatographic method
AW/-/3
Protective clothing. Protection against heat and flame. Limited flame spread materials, material assemblies and clothing will supersede BS EN ISO 14116:2008
PH/3/2
EN 13155
Cranes. Non-fixed load lifting attachments will supersede BS EN 13155:2003+A2:2009
MHE/3/12
EN 13224
Precast concrete products. Ribbed floor elements will supersede BS EN 13224:2004
B/524
EN 13229
Inset appliances, including open fires, fired by solid fuels. Requirements and test methods will supersede BS EN 13229:2001+A2:2004
RHE/28
CEN/TS 16209
Furniture. Classification for properties for furniture surfaces
FW/0/1
EN 14428
Shower enclosures. Functional requirements and test methods will supersede BS EN 14428:2004+A1:2008
B/503
EN 13240
Roomheaters fired by solid fuels. Requirements and test methods will supersede BS EN 13240:2001+A2:2004
RHE/28
EN 16212
Standard on top down and bottom up methods of calculation of energy consumption, energy efficiencies and energy savings
SEM/1/2
EN 14988-1:2006/A1
Childrens high chairs. Safety requirements
CW/1/5
EN 16214-1
Sustainably produced biomass for energy applications. Principles, criteria, indicators and verifiers for biofuels and bioliquids. Terminology
PTI/20/-/1
EN 13336
Leather. Upholstery leather characteristics. Guide for selection of leather for furniture will supersede BS EN 13336:2004
TCI/69
EN 14988-2:2006/A1
Childrens high chairs. Test methods
CW/1/5
EN 13418
Plastics and rubber machines. Winding machines for film or sheet. Safety requirements will supersede BS EN 13418:2004+A1:2008
MCE/3/2
EN ISO 15007-1
Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systems. Definitions and parameters will supersede BS EN ISO 15007-1:2002
AUE/12
EN 16214-3
Sustainably produced biomass for energy applications. Principles, criteria, indicators and verifiers for biofuels and bioliquids. Biodiversity and environmental aspects
PTI/20/-/3
23
EN ISO 23470
Soil quality. Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexammine cobalt trichloride solution
EH/4
EN 50126-2
Railway applications. The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Systems approach to safety will supersede PD CLC/TR 50126-2:2007
GEL/9
CEN/TS 16217
Transportable gas cylinders. Replacement of EEC Directive 84/526/EEC. Seamless aluminium alloy gas cylinders
PVE/3/3
EN ISO 23611-1
Soil quality. Sampling of soil invertebrates. Hand-sorting and formalin extraction of earthworms
EH/4
EN 50126-4
Railway applications. The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Functional safety. Electric and electronic systems
GEL/9
CEN/TS 16218
Transportable gas cylinders. Replacement of EEC Directive 84/527/EEC. Welded unalloyed steel gas cylinders
PVE/3/3
EN ISO 23611-2
Soil quality. Sampling of soil invertebrates. Sampling and extraction of micro-arthropods (collembola and acarina)
EH/4
EN 50126-5
Railway applications. The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS). Functional safety. Software
GEL/9
CEN/TR 16219
Electronic fee collection. Value added services based on EFC on-board equipment
EPL/278
EN ISO 23611-3
Soil quality. Sampling of soil invertebrates. Sampling and soil extraction of enchytraeids
EH/4
EN 50152-1
Railway applications. Fixed installations. Particular requirements for A.C. switchgear. Single-phase circuit-breakers will supersede BS EN 50152-1:2007
GEL/9/3
EN 16223
Leather. Guidelines on the designation and description of leather in upholstery and automotive interior applications
TCI/69
EN ISO 23611-4
Soil quality. Sampling of soil invertebrates. Sampling, extraction and identification of soil inhabiting nematodes
EH/4
EN ISO 23753-1
Soil quality. Determination of dehydrogenase activity in soil. Method using triphenyltetrazolium chloride (TTC)
EH/4
Railway applications. Fixed installations. Particular requirements for A.C. switchgear. Single-phase disconnectors, earthing switches and switches will supersede BS EN 50152-2:2007
GEL/9/3
EN ISO 17402
Soil quality. Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials
EH/4
EN ISO 23753-2
Soil quality. Determination of dehydrogenase activity in soils. Method using iodotetrazolium chloride (INT)
EH/4
EN 50153
Railway applications. Rolling stock. Protective provisions relating to electrical hazards will supersede BS EN 50153:2002
GEL/9/2
EN 50155
Railway applications. Electronic equipment used on rolling stock will supersede BS EN 50155:2007
GEL/9
EN ISO 28706-5
Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion in closed systems
ISE/NFE/8
EN ISO 20963
Soil quality. Effects of pollutants on insect larvae (oxythyrea funesta). Determination of acute toxicity
EH/4
EN 50343
Railway applications. Rolling stock. Rules for installation of cabling will supersede BS EN 50343:2003
GEL/9/2
EN 50065-1
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. General requirements, frequency bands and electromagnetic disturbances will supersede BS EN 50065-1:2001+A1:2010
PEL/205
EN ISO 22030
Soil quality. Biological methods. Chronic toxicity in higher plants
EH/4
EN 50388:2005/A1
Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability
GEL/9/3
CEN/TR 22411
Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
PH/9
EN 50119:2009/A1
Railway applications. Fixed installations. Electric traction overhead contact lines
GEL/9/3
EN 50526-2
Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices. Voltage limiting devices
GEL/9/3
Railway applications. Environmental conditions for equipment. Equipment on board rolling stock will supersede BS EN 50125-1:1999
GEL/9/2
EN 50547
Railway applications. Batteries for auxiliary power supply systems
GEL/9/2
24
EN 50XXX
Railway applications. Fixed installations. Requirements and testing methods for sectioning devices in the view of interoperability constituent
GEL/9/3
ISO 4210
Cycles. Safety requirements for bicycles
GME/25
ISO 11711-1
Ships and marine technology. Piping and machinery. Ballast water management systems. Discharge sampling apparatus
SME/32/-/3
ISO 4409
Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance will supersede BS ISO 4409:2007
MCE/18
ISO 12234-1
Electronic still-picture imaging. Removable memory. Basic removable-memory model will supersede BS ISO 12234-1:2007
CPW/42
EN 50XXX
Railway applications. Fixed installations. Simulation tool for the validation of the design of power supply systems
GEL/9/3
EN 60809:1996/A5
Lamps for road vehicles. Dimensional, electrical and luminous requirements
CPL/34/1
ISO 5145
Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning will supersede BS ISO 5145:2004+A2:2008
PVE/3/1
ISO 13734
Natural gas. Organic components used as odorants. Requirements and test methods
PTI/15
EN 61362
Guide to specification of hydraulic turbine governing systems will supersede BS EN 61362:1998
MCE/15
Assessment of translations
TS/1
ISO/TR 14786
Nanotechnologies. Framework for nomenclature models for nano-objects
NTI/1
EN 61375-2-5
Electronic railway equipment. Train communication network. ETB. Ethernet train backbone
GEL/9/2
ISO/TS 9241-411
Ergonomics of human-system interaction. Evaluation methods for the design of physical input devices
PH/9
ISO/TS 14907-2
Road transport and traffic telematics. Electronic fee collection. Test procedures for user and fixed equipment. Conformance test for the onboard unit application interface
EPL/278
EN 61535:2009/A1
Installation couplers intended for permanent connection in fixed installations
PEL/23
ISO 9912-2
Agricultural irrigation equipment. Filters. Strainer-type filters
AGE/30
ISO 15007-2
Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systems. Equipment and procedures
AUE/12
EN 61755-1-1
Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interfaces for 50.0um multimode fibre. General and guidance
GEL/86/2
ISO 10303-26
Industrial automation systems. Product data representation and exchange. Implementation methods. Binary representation of EXPRESSdriven data
AMT/4
ISO 15614-14
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Laser-arc hybrid welding of steels, nickel and nickel alloys
WEE/-/1
EN 61755-2-3
Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interface standard, 50.0um multimode, flat end face, physically contacting fibres
GEL/86/2
ISO/IEC 10373-6:2010/A2
Identification cards. Test methods. Proximity cards
IST/17
ISO 15883-7
Washer-disinfectors. Requirements and tests for general purpose washer-disinfectors employing chemical disinfection for bedframes, bedside tables, transport carts, containers, surgical tables, furnishings and surgical clogs
CH/198
Sterile, single-use intravascular catheters. Central venous catheters will supersede BS EN ISO 10555-3:1997
CH/84
ISO 10555-4
Sterile, single-use intravascular catheters. Balloon dilatation catheters will supersede BS EN ISO 10555-4:1997
CH/84
Development of provisions for manufacturing defects and manufacturing imperfections for seamless steel and aluminium alloy gas cylinders
PVE/3
EN 62701
Reprocessed mineral insulating oils. Re-refined oils and reclaimed mineral insulating oils for transformers and switchgear
GEL/10
ISO/TS 16195
Nanotechnologies. Generic requirements for reference materials for development of methods for characteristic testing, performance testing and safety testing of nano-particle and nano-fibre powders
NTI/1
EN 62702-1
Fibre optic interconnecting devices and passive components. Degrees of protection provided by fibre optic enclosures (IP codes 65 and 67). General requirements
GEL/86/2
ISO 10983
Timber structures. Solid timber finger-jointing. Production requirements
B/518
25
ISO 16697
Space systems. Safety and compatibility of materials. Method to determine the flammability thresholds of materials
ACE/68
IEC 60717:1981/A1
Method for determination of the space required by capacitors and resistors with unidirectional terminations
EPL/40X
ISO/TR 16335
Corrosion of metals and alloys. Corrosion tests in artificial atmospheres. Guidelines for selection of accelerated corrosion test for product qualification
ISE/NFE/8
ISO 16698
Methods for estimation of future geomagnetic activity
ACE/68
IEC/TR 61850-1
Communication networks and systems for power utility automation. Introduction and overview will supersede PD IEC/TR 61850-1:2003
PEL/57
IEC/TR 62655
Users guide for high-voltage fuses
PEL/32
ISO 19135-2
Geographic information. Procedures for item registration. XML schema implementation will supersede BS EN ISO 19135:2007
IST/36
ISO 16399-2
Meters for irrigation water. Installation and conditions for use
AGE/30
ISO 81060-2:2009/A1
Non-invasive sphygmomanometers. Clinical validation of automated measurement type
CH/121/5
ISO 16399-3
Meters for irrigation water. Test methods and equipment
AGE/30
ISO 21929-2
Sustainability in building construction. Sustainability indicators. Framework for the development of indicators for civil engineering works
B/558
ISO 16413
Evaluation of thickness, density and interface width of thin films by x-ray reflectometry. Instrumental requirements, alignment and positioning, data collection, analysis and reporting
CII/60
ISO 29943-2
Condoms. Guidance on clinical studies. Male condoms. In-use studies of slippage and breakage
CH/157
ISO 16424
Nuclear energy. Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements
NCE/9
CLC/TS 50126
Railway applications. Fixed installations. Code of practice covering electrical installations
GEL/9/3
CLC/TR 50501-2
Railway applications. Rolling stock. Intercommunication between vehicles and train/wayside. Technical contents of standardization work in the field of intercommunication
GEL/9/2
ISO 16438
Agricultural irrigation equipment. Thermoplastic collapsible hoses for irrigation. Specifications and test methods
AGE/30
ISO 16507
Timber structures. Performance test methods for wood-based panel assemblies under concentrated (static and impact) and uniformly distributed loads
B/518
ISO 51276
Practice for use of a polymethylmethacrylate dosimetry system
NCE/2
IEC/TS 60034-25
Rotating electrical machines. A.C. motors when used in power drive systems. Application guide will supersede DD CLC/TS 60034-25:2008 and DD IEC/TS 60034-17:2006
PEL/2
ISO 16598
Timber structures. Structural classification for sawn timber
B/518
ISO 16694
Space systems. The measured parameters at firing bench and flight tests of liquid rocket engines
ACE/68
IEC 60294:1969/A1
Measurement of the dimensions of a cylindrical component having two axial terminations
EPL/40X
10/30209509 DC
BS 1566-1 AMD1 Copper indirect cylinders for domestic purposes. Open vented copper cylinders. Requirements and test methods
B/504
26
10/30212801 DC
BS 6180 Barriers in and about buildings. Code of practice
B/208
10/30199146 DC
BS ISO 10930 Soil quality. Measurement of the stability of soil aggregates subjected to the action of water
EH/4
10/30212804 DC
BS 8417 Preservation of wood. Code of practice
B/515
10/30199632 DC
BS ISO 12404 Soil quality. Guidance on the selection and application of screening methods
EH/4
10/30219800 DC
BS 8509 AMD1 Childrens beds for domestic use. Safety requirements and test methods
FW/0/2
10/30201343 DC
BS ISO 5794-3 Rubber compounding ingredients. Silica, precipitated, hydrated. Evaluation procedures in a mixed solution of styrene-butadiene rubber and butadiene rubber
PRI/23
10/30228272 DC
BS 5395-4 Code of practice for the design of limited access stairs
B/208
10/30202140 DC
BS ISO 13207-1 Road vehicles. LED lamp characteristics for bulb compatible failure detection. LED lamps used for direction indicator and stop lamps
AUE/16
10/30203890 DC
BS EN 771-1 Specification for masonry units. Clay masonry units
10/30228489 DC
BS 8436 Electric cables. Specification for 300/500 V screen electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables
GEL/20/17
10/30004212 DC
BS ISO 11532 Aircraft ground equipment. Graphical symbols
ACE/57
B/519/1
10/30203906 DC
BS EN 771-6 Specification for masonry units. Natural stone masonry units
B/519/1
10/30173705 DC 10/30233750 DC
BS 2S 201 AMD1 Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty unground wire. Specification
ACE/61
BS EN 62282-5-1 Fuel cell technologies. Portable fuel cell power systems. Safety
GEL/105
10/30204395 DC
BS EN 14894 LPG equipment and accessories. Cylinder and drum marking
PVE/19
10/30194376 DC 10/30233752 DC
BS 2S 202 AMD1 Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty ground wire. Specification
ACE/61
10/30206672 DC
BS ISO 19145 Geographic information. Registry of representations of geographic point location
IST/36
BS EN 62585 Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter
EPL/29
10/30208681 DC
BS ISO/IEC Guide 63 Guide to the development and inclusion of safety aspects in International Standards for medical devices
CH/210/4
10/30196983 DC
BS ISO 24617-2 Language resource management. Semantic annotation framework (SemAF). Dialogue acts 18.00 members, 36.00 non-members
TS/1
10/30210869 DC
BS EN ISO 9117-4 Paints and varnishes. Drying tests. Test using a mechanical recorder
STI/10
Are you signed up for BSI newsletters? Sign up for BSIs sector-specific newsletter updates for news, new publications and developments. www.bsigroup.com/newsletters
10/30197471 DC
BS ISO 3087 Iron ores. Determination of the moisture content of a lot
ISE/58
10/30210872 DC
BS EN ISO 9117-5 Paints and varnishes. Drying tests. Modified Bandow-Wolff test
STI/10
10/30197731 DC
BS ISO 26900 Space data and information transfer systems. Orbit data messages
ACE/68/-/7
10/30210934 DC
BS EN 60601-2-3 Medical electrical equipment. Particular requirements for the basic safety and essential performance of short-wave therapy equipment
CH/62/4
27
10/30214984 DC
BS EN 13508-1 Investigation and assessment of drain and sewer systems outside buildings. General requirements
B/505
10/30228227 DC
BS EN 13523-20 Coil coated metals. Test methods. Foam adhesion
STI/27
10/30228230 DC
BS EN 13001-2 Crane safety. General design. Load actions
MHE/3/1
10/30210946 DC
BS EN 60601-2-10 Medical electrical equipment. Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
CH/62/4
10/30215731 DC
BS ISO 21940-23 Mechanical vibration. Rotor balancing. Balancing machines. Enclosures and other protective measures for the measuring station
GME/21
10/30228342 DC
BS EN ISO 20566 Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale carwash
STI/10
10/30211325 DC
BS ISO 15009 Soil quality. Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons. Purge-andtrap method with thermal desorption
EH/4
10/30216796 DC
BS ISO 3076 Round steel short link chains for general lifting purposes. Medium tolerance sling chains for chain slings. Grade 8
MHE/1
10/30211650 DC
BS ISO 8820-8 Road vehicles. Fuse-links. Fuselinks with bolt-in contacts (Type H and J) with rated voltage of 450 V
AUE/16
10/30229043 DC
BS EN 653 Resilient floor coverings. Expanded (cushioned) polyvinyl chloride floor coverings. Specification
PRI/60
10/30218287 DC
BS ISO 20022-1 Financial services. Universal financial industry message scheme. Metamodel 18.00 members, 36.00 non-members
IST/12
10/30212265 DC
BS ISO 14701 Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
CII/60
10/30229295 DC
BS EN 15430-1 AMD1 Winter and road service area maintenance equipments. Data acquisition and transmission. In vehicle data acquisition
B/513
10/30218290 DC
BS ISO 20022-2 Financial services. Universal financial industry message scheme. UML profile
IST/12
10/30212358 DC
BS ISO 13400-1 Road vehicles. Diagnostic communication over Internet Protocol (DoIP). General information and use case definition
AUE/16
10/30218293 DC
BS ISO 20022-3 Financial services. Universal financial industry message scheme. Modelling
IST/12
10/30229550 DC
BS EN 12451 Copper and copper alloys. Seamless, round tubes for heat exchangers
NFE/34/1
10/30212361 DC
BS ISO 13400-2 Road vehicles. Diagnostic communication over Internet Protocol (DoIP). Network and transport layer requirements and services
AUE/16
10/30218296 DC
BS ISO 20022-4 Financial services. Universal financial industry message scheme. XML schema generation
IST/12
10/30229703 DC
BS EN ISO 2812-3 Paints and varnishes. Determination of resistance to liquids. Method using an absorbent medium
STI/10
10/30212364 DC
BS ISO 13400-3 Road vehicles. Diagnostic communication over Internet Protocol (DoIP). IEEE 802.3 based wired vehicle interface
AUE/16
10/30218299 DC
BS ISO 20022-5 Financial services. Universal financial industry message scheme. Reverse engineering
IST/12
10/30229858 DC
BS EN ISO 11238 Health informatics. Identification of medicinal products. Data elements and structures for unique identification and exchange of regulated information on substances
IST/35
10/30212765 DC
BS ISO 10502 Aerospace. Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 C and 10500 kPa. Technical specification
ACE/69
10/30218302 DC
BS ISO 20022-7 Financial services. Universal financial industry message scheme. Registration
IST/12
10/30229861 DC 10/30218305 DC
BS ISO 20022-8 Financial services. Universal financial industry message scheme. ASN.1 generation
IST/12
10/30213501 DC
BS ISO 14380 Water quality. Determination of the acute toxicity to Thamnocephalus platyurus (crustacea, anostraca)
EH/3/5
BS EN ISO 11239 Health informatics. Identification of medicinal products. Data elements and structures for unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation and routes of administration
IST/35
10/30228056 DC
BS EN 16129 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 100kg/h, associated safety devices and adaptors for butane, propane, and their mixtures 18.00 members, 36.00 non-members
GSE/24
10/30214832 DC
BS ISO 27145-4 Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements. Connection between vehicle and test equipment
AUE/16
10/30229864 DC
BS EN ISO 11240 Health informatics. Identification of medicinal products. Data elements and structures for unique identification and exchange of units of measurement
IST/35
28
10/30229867 DC
BS EN ISO 11615 Health informatics. Identification of medicinal products. Data elements and structures for unique identification and exchange of regulated medicinal product information 18.00 members, 36.00 non-members
IST/35
10/30231775 DC
BS EN 687 Resilient floor coverings. Specification for plain and decorative linoleum on a corkment backing
PRI/60
10/30231832 DC
BS EN 14869-1 Structural adhesives. Determination of shear behaviour of structural bonds. Torsion test method using butt-bonded hollow cylinders
PRI/52
10/30231778 DC
BS EN 688 Resilient floor coverings. Specification for corklinoleum
PRI/60
10/30231835 DC
BS EN 1965-2 Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate
PRI/52
10/30229870 DC
BS EN ISO 11616 Health informatics. Identification of medicinal products. Data elements and structures for unique identification and exchange of regulated pharmaceutical product information
IST/35
10/30231781 DC
BS EN 13537 Requirements for sleeping bags
SW/136
10/30231838 DC
BS EN 1965-1 Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate
PRI/52
10/30229916 DC
BS EN 654 Resilient floor coverings. Semiflexible polyvinyl chloride tiles. Specification
PRI/60
10/30231802 DC
BS EN 13629 Wood flooring. Solid individual and pre-assembled hardwood boards
B/543
10/30229919 DC
BS EN 655 Resilient floor coverings. Tiles of agglomerated composition cork with polyvinyl chloride wear layer. Specification
PRI/60
10/30231805 DC
BS EN 1240 Adhesives. Determination of hydroxyl value and/or hydroxyl content
PRI/52
10/30231844 DC
BS EN 13225 Precast concrete products. Linear structural elements
B/524
10/30231808 DC 10/30229922 DC
BS EN 686 Resilient floor coverings. Specification for plain and decorative linoleum on a foam backing
PRI/60
10/30231853 DC
BS EN 10352 Stainless steel plumbing fittings. Fittings with press ends for metallic tubes
ISE/110
10/30231811 DC 10/30229983 DC
BS EN 500-4 AMD2 Mobile road construction machinery. Safety. Specific requirements for compaction machines
B/513/1
10/30231859 DC
BS EN 16154 Air traffic management. Software assurance levels
ACE/58/-/5
10/30231814 DC
BS EN 12962 Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index)
PRI/52
10/30231940 DC
BS EN ISO 12967-1 Health informatics. Service architecture. Enterprise viewpoint
IST/35
10/30230104 DC
BS SWERF Size Weighted Respirable Fraction. SweRF and Size Weighted Respirable Fraction of Crystalline Silica. SWeRFcs
EH/2
10/30231817 DC
BS EN 12705 Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration
PRI/52
10/30231944 DC
BS EN ISO 12967-2 Health informatics. Service architecture. Information viewpoint
IST/35
10/30230603 DC
BS ISO 21940-14 Mechanical vibration. Rotor balancing. Balance quality requirements of rigid and flexible rotors. Balance errors
GME/21
10/30231820 DC
BS EN 1238 Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball)
PRI/52
10/30231948 DC
BS EN ISO 12967-3 Health informatics. Service architecture. Computational viewpoint
IST/35
10/30231823 DC
BS EN 1239 Adhesives. Freeze-thaw stability
PRI/52
10/30231953 DC
BS EN ISO 12052 Health informatics. Digital imaging and communication in medicine (DICOM) including workflow and data management
IST/35
10/30231708 DC
BS ISO/IEC 10373-9 Identification cards. Test methods. Optical memory cards. Holographic recording method
IST/17
10/30231826 DC
BS EN 14869-2 Structural adhesives. Determination of shear behaviour of structural bonds. Thick adherends shear test
PRI/52
10/30231772 DC
BS EN 12258-1 Aluminium and aluminium alloys. Terms and definitions. General terms 18.00 members, 36.00 non-members
NFE/35
10/30231978 DC
BS EN ISO 28721-1 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Quality requirements for apparatus, components, appliances and accessories
STI/36
10/30231829 DC
BS EN 828 Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface
PRI/52
29
10/30233871 DC
BS ISO 17101-1 Agricultural machinery. Thrownobject test and acceptance criteria. Rotary mowers
AGE/32
10/30235496 DC
BS EN 50065-1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. General requirements, frequency bands and electromagnetic disturbances
PEL/205
10/30234175 DC
BS ISO 4251-2 AMD1 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre load ratings
AUE/4
10/30235503 DC
BS EN 61496-1 AMD2 Safety of machinery. Electro-sensitive protective equipment. General requirements and tests
MCE/3
10/30231986 DC
BS EN ISO 28721-3 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Thermal shock resistance
STI/36
10/30234443 DC
BS ISO 13887 Cold-reduced steel sheet of higher yield strength with improved formability
ISE/109
10/30235537 DC
BS EN 61249-4-18 Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
EPL/501
10/30231990 DC
BS EN ISO 28722 Vitreous and porcelain enamels. Characteristics of enamel coatings applied to steel panels intended for architecture
STI/36
10/30234446 DC
BS ISO 16363 Space data and information transfer systems. Audit and certification of trustworthy digital repositories
ACE/68/-/7
10/30231994 DC
BS EN ISO 28723 Vitreous and porcelain enamels. Determination of the edge covering on enamelled steel plate to be used in heat exchangers
STI/36
10/30235541 DC
BS EN 61249-4-19 Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). High performance, non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
EPL/501
10/30234576 DC
BS EN 60598-2-24 Luminaires. Particular requirements. Luminaires with limited surface temperatures
CPL/34/4
10/30231999 DC
BS EN ISO 28763 Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications
STI/36
10/30234777 DC
BS EN 61982 Secondary batteries (except lithium) for the propulsion of electric road vehicles. Performance and endurance tests
PEL/21
10/30235547 DC
BS EN 60350-1 Household electric cooking appliances. Ranges, ovens, steam ovens and grills. Methods for measuring performance
CPL/59
10/30232003 DC
BS EN ISO 28764 Vitreous and porcelain enamels. Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
STI/36
10/30234790 DC
BS EN 60838-2-2 AMD1 Miscellaneous lampholders. Particular requirements. Connectors for LED-modules
CPL/34/2
10/30235551 DC
BS EN 60350-2 Household electric cooking appliances. Hobs. Methods for measuring performance
CPL/59
10/30232007 DC
BS EN ISO 28765 Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
STI/36
10/30234803 DC
BS EN 61169-1 Radio frequency connectors. Generic specification. General requirements and measuring methods
EPL/46
10/30235844 DC
BS EN 61881-2 Railway applications. Rolling stock equipment. Capacitor for power electronics. Aluminium electrolytic capacitors with non solid electrolyte
GEL/9/2
10/30232407 DC
BS EN 126 Multifunctional controls for gas burning appliances
GSE/22
10/30235040 DC
BS EN 61362 Guide to specification of hydraulic turbine governing systems
MCE/15
10/30235845 DC
BS EN 61881-3 Railway applications. Rolling stock equipment. Capacitor for power electronics. Electric double-layer capacitors
GEL/9/2
10/30233322 DC
BS EN 16164 Water quality. Guidance standard for designing and selecting taxonomic keys
EH/3/5
10/30235313 DC
BS EN 50411-6-1 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Unprotected microduct for category S and A
GEL/86/2
10/30236476 DC 10/30233846 DC
BS ISO 17101-2 Agricultural machinery. Thrownobject test and acceptance criteria. Flail mowers
AGE/32
10/30235452 DC
BS EN 61988-2-5 Plasma display panels. Measuring methods. Acoustic noise
EPL/47
BS ISO/IEC 21118 Information technology. Office equipment. Information to be included in specification sheets. Data projectors
IST/3
30
prEN 2826
Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of gas components in the smoke These standards have now been issued for FV ballot. The texts are available on request from the contact point (below). Contact: Committee Service Centre Email: csc@bsigroup.com
ACE/65
EN 12413:2007/A1
Safety requirements for bonded abrasive products The above has recently been issued under the CEN UAP. Copies of the draft are available on request from the contact point (below). Contact: Committee Service Centre Email: csc@bsigroup.com
MTE/13
prEN 6031
Fibre reinforced plastics. Test methods. Determination of in-plane shear properties (+/45 tensile test)
prEN 6032
Fibre reinforced plastics. Test method. Determination of the glass transition temperatures
EN 326-2:2010 EN 60456:2005/A1
Clothes washing machines for household use. Methods for measuring the performance The above draft has been issued under the CENELEC UAP. Copies can be obtained from the Programme Manager (below). Any comments should be submitted no later than 31 December, 2010. Contact: Bob Stratton Email: bob.stratton@bsigroup.com
CPL/59
prEN 6033
Carbon fibre reinforced plastics. Test method. Determination of interlaminar fracture toughness energy. Mode I Gic
EN 459-2:2010
Building lime. Test methods
B/516/11
Fibre reinforced plastics. Test method. Determination of notched and unnotched tensile strength
prEN 6037
Fibre reinforced plastics. Test method. Determination of bearing strength
EN 558:
Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and class designated valves CORRIGENDUM 1:September 2010
prEN 6038
Fibre reinforced plastics. Test method. Determination of the compression strength after impact These standards have been circulated for CEN Enquiry vote. The drafts are available on request from the contact point (below). Contact: Committee Service Centre Email: csc@bsigroup.com
ACE/65
to EN 558:2008
PSE/18/1
ISO 15064
Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of the isomer ratio in toluenediisocyanate This standard has been issued for FDIS ballot without a circulated DIS ballot, as the revision constitutes only minor changes listed in the introduction. Copies of which are available upon request from the Programme Manager (below). Contact: Alex Price Email: Alex.Price@bsigroup.com
PRI/42
EN 975-1:
Sawn timber. Appearance grading of hardwoods. Oak and beech CORRIGENDUM 1:September 2010
to EN 975-1:2009
B/543
prEN 16102
Intelligent transport systems. ECall. Operating requirements for third party support This standard has been issued for DIS ballot, copies of which are available upon request from the Programme Manager (below). Contact: Alex Price Email: alex.price@bsigroup.com
EPL/278
EN 998-1:2010
Specification for mortar for masonry. Rendering and plastering mortar
B/519/2
prEN 2825
Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of smoke density
EN 998-2:2010
Specification for mortar for masonry. Masonry mortar
B/519/2
31
EN 13148:2010
Copper and copper alloys. Hot-dip tinned strip
NFE/34/1
EN 15891:2010
Foodstuffs. Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and UV detection
AW/-/3
EN 13285:2010 EN 1555-1:2010
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). General
PRI/88/2
EN 15930:2010 EN 13286-2:2010
Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
B/510/4
EN 1555-2:2010
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes
PRI/88/2
EN 15938:2010
Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity
PTI/13
EN 13477-2:2010 EN 1555-3:2010
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings
PRI/88/2
EN 15947-1:2010
Pyrotechnic articles. Fireworks, categories 1, 2 and 3. Terminology
CII/47
EN 1555-5:2010
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fitness for purpose of the system
PRI/88/2
EN 15193:
Energy performance of buildings. Energy requirements for lighting CORRIGENDUM 1:September 2010
EN 15947-2:2010
Pyrotechnic articles. Fireworks, categories 1, 2 and 3. Categories and types of firework
CII/47
to EN 15193:2007
CPL/34/10
EN 1591-1:
Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method CORRIGENDUM 1:September 2010
EN 15288-1:2008+A1:2010
Swimming pools. Safety requirements for design
SW/136/8
EN 15947-3:2010
Pyrotechnic articles. Fireworks, categories 1, 2 and 3. Minimum labelling requirements
CII/47
to EN 1591-1:2001+A1:2009
PSE/15
EN 15432:
Winter and road service area maintenance equipments. Front-mounted equipments. Interchangeability CORRIGENDUM 1:June 2010
EN 15947-4:2010
Pyrotechnic articles. Fireworks, categories 1, 2 and 3. Test methods
CII/47
EN 1656:
Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1) CORRIGENDUM 1:August 2010
to EN 15432:2008
B/513/-/16
EN 15947-5:2010
Pyrotechnic articles. Fireworks, categories 1, 2 and 3. Requirements for construction and performance
CII/47
to EN 1656:2009
CH/216
EN 15643-1:2010
Sustainability of construction works. Sustainability assessment of buildings. General framework
B/558
EN 4136:
Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235C CORRIGENDUM 1:September 2010
EN 15795:2010
Products used for treatment of water intended for human consumption. Natural unexpanded aluminosilicates
CII/59
to EN 4136:2009
ACE/12
EN 15821:2010 EN 12042:2005+A1:2010
Food processing machinery. Automatic dividers. Safety and hygiene requirements
MCE/3/5
Multi-firing sauna stoves fired by natural wood logs. Requirements and test methods
RHE/28
EN 12043:2000+A1:2010
Food processing machinery. Intermediate provers. Safety and hygiene requirements
MCE/3/5
The CEN ORCHID roadmap standardising information across the plant engineering supply chain. Implementation guide no current standard is superseded 81.00 members, 162.00 non-members
EN 15890:2010
Foodstuffs. Determination of patulin in fruit juice and fruit based puree for young children. HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection
AW/-/3
CWA 16180-3:2010
The CEN ORCHID roadmap standardising information across the plant engineering supply chain. Standards landscape no current standard is superseded 98.00 members, 196.00 non-members
EN 12697-44:2010
Bituminous mixtures. Test methods for hot mix asphalt. Crack propagation by semi-circular bending test
B/510/1
32
CENELEC PUBLICATIONS
EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.
CEN REPORTS
CEN/TR 15404:2010
Solid recovered fuels. Methods for the determination of ash melting behaviour by using characteristic temperatures
PTI/17
CEN/TR 15760:2010
Heat meters. Checklist documenting the relationship between the Directive 2004/22/EC (MID) and EN 1434:2007
CPI/30/7
Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile)
EPL/48
CEN/TR 16041:2010
Bicycles. Replies to requests for interpretation of EN 14764
GME/25
EN 50180:2010
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers
PEL/36
CEN/TR 16042:2010
Bicycles. Replies to requests for interpretation of EN 14765
GME/25
CEN/TR 16043:2010
Bicycles. Replies to requests for interpretation of EN 14766
GME/25
CEN/TR 16044:2010
Bicycles. Replies to requests for interpretation of EN 14781
GME/25
to EN 60335-2-27:2010
CPL/61/1
CEN/TS 15406:2010
Solid recovered fuels. Determination of bridging properties of bulk material
PTI/17
CEN/TS 15639:2010
Solid recovered fuels. Determination of mechanical durability of pellets
PTI/17
to EN 60335-2-90:2006
CPL/61/7
CEN/TS 16071:2010
Interoperability of Flight Data Processing (Air Traffic Control. Air Traffic Control) for application under the Single European Sky. Interoperability Regulation EC552/2004
ACE/58/-/5
34
to EN 60695-6-1:2005
GEL/89
to EN 62271-101:2006
PEL/17/1
IEC PUBLICATIONS
It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2)
to EN 61190-1-3:2007
EPL/501
IEC 60060-1:2010
(Edition 3) High-voltage test techniques. General definitions and test requirements 205.45 members, 216.26 non-members
PEL/42
IEC 60079-18:
Explosive atmospheres. Equipment protection by encapsulation m CORRIGENDUM 1:June 2009
to CLC/TS 50238-3:2010
GEL/9/1
to IEC 60079-18:2009
GEL/31
IEC 60252-1:2010
HARMONIZATION DOCUMENTS
CENELEC HD 639 S1:
(Edition 2) AC motor capacitors. General. Performance, testing and rating. Safety requirements. Guidance for installation and operation 128.40 members, 135.16 non-members
PEL/33
Electrical accessories. Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) AMENDMENT 2:September 2010
IEC/TR 60269-5:2010
Low-voltage fuses. Guidance for the application of low-voltage fuses 158.37 members, 166.70 non-members
PEL/32
35
IEC/PAS PUBLICATIONS
IEC/PAS 62326-14:2010
Printed boards. Device embedded substrate. Terminology/reliability/design guide 205.45 members, 216.26 non-members
EPL/501
ISO 3743-1:2010
(Edition 2) Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for small movable sources inreverberant fields. Comparison method for a hard-walled test room 49.16 members, 81.93 non-members
EH/1/4
IEC 60312-1:2010
Vacuum cleaners for household use. Dry vacuum cleaners. Methods for measuring the performance 205.45 members, 216.26 non-members
CPL/59/6
ISO PUBLICATIONS
It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2) ISO 3744:2010
(Edition 3) Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free fieldover a reflecting plane 65.06 members, 108.43 non-members
EH/1/4
IEC 60312-2:2010
Vacuum cleaners for household use. Wet cleaning appliances. Methods of measuring the performance 89.89 members, 94.62 non-members
CPL/59/6
IEC 60335-2-25:2010
(Edition 6) Household and similar electrical appliances. Safety. Particular requirements for microwave ovens, including combination microwave ovens 128.40 members, 135.16 non-members
CPL/61/7
ISO 225:2010
(Edition 3) Fasteners. Bolts, screws, studs and nuts. Symbols and descriptions of dimensions 57.11 members, 95.18 non-members
FME/9/2
ISO 4126-10:2010
Safety devices for protection against excessive pressure. Sizing of safety valves for gas/liquid two-phase flow 51.32 members, 85.54 non-members
PSE/18/6
IEC 62374-1:2010
Semiconductor devices. Time-dependent dielectric breakdown (TDDB) test for intermetal layers 59.93 members, 63.08 non-members
EPL/47
(Edition 2) Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test 28.91 members, 48.19 non-members
PRI/22
IEC 62376:2010
Maritime navigation and radiocommunication equipment and systems. Electronic chart system (ECS). Operational and performance requirements, methods of testing and required test results 128.40 members, 135.16 non-members
EPL/80
(Edition 2) Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Basic principles 23.86 members, 39.76 non-members
PRI/22
IEC 62475:2010
High-current test techniques. Definitions and requirements for test currents and measuring systems 222.57 members, 234.28 non-members
PEL/42
AW/7
ISO 3741:2010
(Edition 4) Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for reverberation test rooms 60.72 members, 101.20 non-members
EH/1/4
ISO 6472:2010
(Edition 4) Rubber compounding ingredients. Symbols and abbreviated terms 33.25 members, 55.42 non-members
PRI/10
36
ISO 8536-4:2010
(Edition 5) Infusion equipment for medical use. Infusion sets for single use, gravity feed 33.25 members, 55.42 non-members
CH/212
ISO 10360-5:2010
(Edition 2) Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using single and multiple stylus contacting probing systems 44.82 members, 74.70 non-members
TDW/4
ISO/IEC 10373-3:2010
(Edition 2) Identification cards. Test methods. Integrated circuit cards with contacts and related interface devices 57.11 members, 95.18 non-members
IST/17
to ISO 7010:2003
5.78 members, 9.64 non-members
PH/8/1
ISO 9187-2:2010
(Edition 2)
ISO 10537:2010
Space data and information transfer systems. Encapsulation service 42.65 members, 71.08 non-members
ACE/68/-/7
ISO 7619-1:2010
(Edition 2) Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (shore hardness) 23.86 members, 39.76 non-members
PRI/22
Injection equipment for medical use. One-pointcut (OPC) ampoules 15.91 members, 26.51 non-members
CH/212
Resilient floor coverings. Heterogeneous poly(vinyl chloride) floor coverings. Specification 20.96 members, 34.94 non-members
PRI/3/60
ISO 7619-2:2010
(Edition 2) Rubber, vulcanized or thermoplastic. Determination of indentation hardness. IRHD pocket meter method 18.07 members, 30.12 non-members
PRI/22
ISO 10678:2010
Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue 26.75 members, 44.58 non-members
RPI/13
ISO 10332:2010
(Edition 2) Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness 20.96 members, 34.94 non-members
ISE/110
ISO/IEC 7811-6:
Identification cards. Recording technique. Magnetic stripe. High coercivity CORRIGENDUM 1:September 2010
ISO 11005:2010
Technical product documentation. Use of main documents 20.96 members, 34.94 non-members
TDW/4
to ISO/IEC 7811-6:2008
IST/17
ISO 8394-1:2010
Building construction. Jointing products. Determination of extrudability of sealants 18.07 members, 30.12 non-members
B/547
Please do not send confirmation of orders placed by telephone as it can lead to duplication
ISO 11148-3:2010
Hand-held non-electric power tools. Safety requirements. Drills and tappers 42.65 members, 71.08 non-members
MCE/8/-/2
ISO 8394-2:2010
Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus 20.96 members, 34.94 non-members
B/547
ISO 11148-4:2010
Hand-held non-electric power tools. Safety requirements. Non-rotary percussive power tools 42.65 members, 71.08 non-members
MCE/8/-/2
38
ISO 12474:2010
Hexagon socket head cap screws with metric fine pitch thread 20.96 members, 34.94 non-members
FME/9/3
ISO 13007-4:2010
(Edition 2) Ceramic tiles. Grouts and adhesives. Test methods for grouts 38.32 members, 63.86 non-members
B/539
Standard test method for assessing the ignition propensity of cigarettes 35.42 members, 59.04 non-members
FSH/21/15
ISO 13526:2010
Space data and information transfer systems. Tracking data message 65.06 members, 108.43 non-members
ACE/68
(Edition 2) Textiles. Assessment of the ignitability of bedding items Ignition source: smouldering cigarette 26.75 members, 44.58 non-members
TCI/66/-/8
ISO 13527:2010
Space data and information transfer systems. XML formatted data unit (XFDU) structure and construction rules 60.72 members, 101.20 non-members
ACE/68
ISO 13537:2010
Space data and information transfer systems. Reference architecture for space data systems 80.96 members, 134.94 non-members
ACE/68
(Edition 2) Textiles. Assessment of the ignitability of bedding items. Ignition source: match-flame equivalent 26.75 members, 44.58 non-members
TCI/100
ISO 13541:2010
Space data and information transfer systems. Attitude data messages
(Edition 2) Ceramic tiles. Grouts and adhesives. Terms, definitions and specifications for adhesives 20.96 members, 34.94 non-members
B/539
ISO 13680:2010
(Edition 3) Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock. Technical delivery conditions 69.40 members, 115.66 non-members
PSE/17/-/5
ISO 11794:2010
Copper, lead, zinc and nickel concentrates. Sampling of slurries 51.32 members, 85.54 non-members
NFE/36
ISO 13007-2:2010
(Edition 2) Ceramic tiles. Grouts and adhesives. Test methods for adhesives 46.99 members, 78.31 non-members
B/539
ISO/IEC 13818-1:
Information technology. Generic coding of moving pictures and associated audio information. Systems AMENDMENT 4:September 2010
ISO 11839:2010
Machinery for forestry. Glazing and panel materials used in operator enclosures for protection against thrown sawteeth. Test method and performance criteria 18.07 members, 30.12 non-members
AGE/29
ISO 13007-3:2010
(Edition 2) Ceramic tiles. Grouts and adhesives. Terms, definitions and specifications for grouts 20.96 members, 34.94 non-members
B/539
to ISO/IEC 13818-1:2007
38.32 members, 63.86 non-members
IST/37
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO 12215-8:
Small craft. Hull construction and scantlings. Rudders CORRIGENDUM 1:September 2010 To order visit http://shop.bsigroup.com
ISO 13956:2010
Plastics pipes and fittings. Decohesion test of polyethylene (PE) saddle fusion joints. Evaluation of ductility of fusion joint interface by tear test 23.86 members, 39.76 non-members
PRI/88/4
to ISO 12215-8:2009
GME/33
40
ISO 14171:2010
(Edition 2) Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification 35.42 members, 59.04 non-members
WEE/39
ISO/TR 16178:2010
Footwear. Critical substances potentially present in footwear and footwear components 51.32 members, 85.54 non-members
TCI/69
ISO 21507:2010
(Edition 2) Earth-moving machinery. Performance requirements for non-metallic fuel tanks 18.07 members, 30.12 non-members
B/513/1
ISO 16532-3:2010
Paper and board. Determination of grease resistance. Turpentine test for voids in glassine and greaseproof papers 20.96 members, 34.94 non-members
PAI/11
ISO 22448:2010
Earth-moving machinery. Anti-theft systems. Classification and performance 18.07 members, 30.12 non-members
B/513/1
ISO/IEC 14496-2:
Information technology. Coding of audio-visual objects. Visual CORRIGENDUM 4:September 2010
to ISO/IEC 14496-2:2004
IST/37
ISO 18437-2:
Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Resonance method AMENDMENT 1:September 2010
ISO 22647:2010
(Edition 2) Space data and information transfer systems. Space link identifiers 38.32 members, 63.86 non-members
ACE/68/-/7
ISO/IEC 14496-5:
Information technology. Coding of audio-visual objects. Reference software CORRIGENDUM 4:September 2010
to ISO 18437-2:2005
5.78 members, 9.64 non-members
GME/21
to ISO/IEC 14496-5:2001+A10:2007
IST/37
ISO/IEC 23000-3:
Information technology. Multimedia application format (MPEG-A). MPEG photo player application format AMENDMENT 2:August 2010
ISO 14729:
Ophthalmic optics. Contact lens care products. Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses AMENDMENT 1:October 2010
ISO 18437-3:
Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Cantilever shear beam method AMENDMENT 1:September 2010
to ISO/IEC 23000-3:2007
5.78 members, 9.64 non-members
IST/37
to ISO 14729:2001
5.78 members, 9.64 non-members
CH/172/9
to ISO 18437-3:2005
5.78 members, 9.64 non-members
GME/21
ISO/IEC 23000-9:
Information technology. Multimedia application format (MPEG-A). Digital Multimedia Broadcasting application format AMENDMENT 1:August 2010
ISO/TS 14907-1:
Road transport and traffic telematics. Electronic fee collection. Test procedures for user and fixed equipment. Description of test procedures CORRIGENDUM 1:September 2010
ISO 18752:
Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification AMENDMENT 1:October 2010
to ISO/IEC 23000-9:2008
38.32 members, 63.86 non-members
IST/37
to ISO/TS 14907-1:2010
EPL/278
to ISO 18752:2006
5.78 members, 9.64 non-members
PRI/66
ISO/TS 23647:2010
Vegetable fats and oils. Determination of wax content by gas chromatography 31.09 members, 51.81 non-members
AW/307
ISO 15527:2010
(Edition 2) Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods 23.86 members, 39.76 non-members
PRI/75
ISO/IEC 19793:
Information technology. Open Distributed Processing. Use of UML for ODP system specifications CORRIGENDUM 1:September 2010
ISO 24034:2010
(Edition 2) Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification 26.75 members, 44.58 non-members
WEE/39
to ISO/IEC 19793:2008
IST/15
ISO/IEC 15693-1:2010
(Edition 2) Identification cards. Contactless integrated circuit cards. Vicinity cards. Physical characteristics 18.07 members, 30.12 non-members
IST/17
ISO 19899:2010
Plastics piping systems. Polyolefin pipes and mechanical fitting assemblies. Test method for the resistance to end load (AREL test) 20.96 members, 34.94 non-members
PRI/88/4
ISO 24500:2010
Ergonomics. Accessible design. Auditory signals for consumer products 20.96 members, 34.94 non-members
PH/9/1
41
ISO 28279:2010
Sintered metal materials. Determination of the level of cleanliness of powder-metallurgy parts 15.91 members, 26.51 non-members
ISE/65
ISO/IEC 29500-4:
Information technology. Document description and processing languages. Office Open XML File Formats Transitional Migration Features AMENDMENT 1:August 2010
to ISO/IEC 29500-4:2008
5.78 members, 9.64 non-members
IST/41
ISO/IEC TR 24772:2010
Information technology. Programming languages. Guidance to avoiding vulnerabilities in programming languages through language selection and use 80.96 members, 134.94 non-members
IST/5
ISO 28706-5:2010
(Edition 2) Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion in closed systems 26.75 members, 44.58 non-members
STI/36
ISO 29541:2010
Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method 23.86 members, 39.76 non-members
PTI/16
ISO 24917:2010
Space systems. General test requirements for launch vehicles 46.99 members, 78.31 non-members
ACE/68/-/2
ISO 28721-4:2010
Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Quality requirements for glass-lined flanged steel pipes and flanged steel fittings 18.07 members, 30.12 non-members
STI/36
ISO/TS 29843-1:2010
Soil quality. Determination of soil microbial diversity. Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis 23.86 members, 39.76 non-members
EH/4
ISO 26062:2010
Nuclear technology. Nuclear fuels. Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry 38.32 members, 63.86 non-members
NCE/9
ISO/IEC 29124:2010
Information technology. Programming languages, heir environments and system software interfaces. Extensions to the C$ library to support mathematical special functions 38.32 members, 63.86 non-members
IST/5
ISO 30011:2010
Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry 46.99 members, 78.31 non-members
EH/2/2
ISO 26322-2:2010
Tractors for agriculture and forestry. Safety. Narrow-track and small tractors 18.07 members, 30.12 non-members
AGE/6
ISO/PAS PUBLICATIONS
ISO/IEC TR 29125:2010
Information technology. Telecommunications cabling requirements for remote powering of terminal equipment 26.75 members, 44.58 non-members
TCT/7
ISO/PAS 28002:2010
Security management systems for the supply chain. Development of resilience in the supply chain. Requirements with guidance for use 57.11 members, 95.18 non-members
SME/32
ISO 26642:2010
Food products. Determination of the glycaemic index (GI) and recommendation for food classification 33.25 members, 55.42 non-members
AW/-/3
Help Us to Help You! Always quote your Customer Number Dont know your number? Contact Customer Services 020 8996 9001 who will be happy to check it for you
ISO 27547-1:2010
Plastics. Preparation of test specimens of thermoplastic materials using mouldless technologies. General principles, and laser sintering of test specimens 26.75 members, 44.58 non-members
PRI/82
Will not be implemented as a British Standard. Is approved as suitable for use in the UK
ISO/IEC 29500-1:
Information technology. Document description and processing languages. Office Open XML File Formats Fundamentals and Markup Language Reference AMENDMENT 1:August 2010
ISO 28218:2010
Radiation protection. Performance criteria for radiobioassay 51.32 members, 85.54 non-members
NCE/2
to ISO/IEC 29500-1:2008
5.78 members, 9.64 non-members
IST/41
42