Professional Documents
Culture Documents
TK Bausysteme
Coil-coating systems
For external applications: PLADUR, SP (lacquer system) Galvanized steel coil with dual layer oven cured polyester lacquer on the exposed face, nominal coating thickness 25 m; reverse side with protective layer (RSL). PLADUR, PVDF (lacquer system) Galvanized steel coil with dual layer oven cured polyvinylidene difluoride lacquer on the exposed face, nominal coating thickness: 25 m; reverse side with protective layer (RSL). These systems, along with our protective coatings, correspond to corrosion protection class III as per DIN 55928-8. ReflectionsOne For special colour systems such as the Reflections collection, please see the special leaflets which we will be pleased to send you on request. Alternatively visit our homepage on the Internet www.thyssenkrupp-bausysteme.com. Other coating systems Altogether 14 coating systems are available to meet most requirements. As an example, we recommend the HDP 50 system for use as a water proof external coating for roofs. Please contact us, we will be pleased to give you advice.
PLADUR SP
For internal applications: PLADUR, DU (lacquer system) Galvanized steel coil with oven cured polyester lacquer on the exposed face, nominal coating thickness 12 m; reverse side with protective layer (RSL). Low corrosion resistance, only recommended for use in dry interiors. Due to the thin nominal coating thickness, a uniform colour shade cannot be guaranteed, not even for the sheets of a single batch. This system, along with our protective coatings, correspondes to corrosion protection class II as per DIN 55928-8.
Protective coating on the reverse side (RSL) Coil-coated reverse side, coating system PLADUR with a nominal layer thickness of approx. 10 m. Colour similar to grey white. Due to the thin nominal coating thickness, a uniform olour shade cannot be guaranteed). When PLADUR is combined with DU/RSL, the coating system and the colour will be determined by our works (combination may vary within one order).
PLADUR PVDF
Special coatings
ems-isolier FS 3000 is a highly durable dual layer oven cured food safe lacquer with a nominal coating thickness of 25 m. Certified to be food safe, being suitable for use in food processing environments under European and German regulations. LMF is a food safe laminate with a nominal film thickness of 150 m. It is only suitable for internal applications. Wrinkle is a special coating with a low gloss grade for exacting demands for an aesthetic colour appearance. The coating does not stain easily and can be readily cleaned. PLADUR Agro 3 is a special coating in RAL 9002 for use in agricultural applications with highly contaminated atmospheres.
PLADUR DU
FS 3000
LMF
Wrinkle
PLADUR Agro 3
The colours
Colours in their true sense offer building owners, architects and planners fantastic possibilities of designing building exteriors to meet exacting asthetic demands. The colours specified herein (e.g. 1002) are similar to RAL. The colour prints are only representational and may deviate from the original colours. The original colour samples which are available on request are definitive. Other colours in SP and PVDF coating systems are available on request (min. order quantity: 600 m). The colour groups (CG I, II and III) are allocated to the various colours. For further information on brightness values, please see www.thyssenkrupp-bausysteme.com. For the standard delivery range a large choice, classified according to products, coatings and colours, is kept in stock. Please consult us for the lead times of your preferred selection of colours.
Protective coatings
Protective coatings Weight Coating of thickness coating per side m Percentage by weight gr/m2 275 20 Constituents Corrosion protection class I as per DIN 55928, part 8 I as per DIBt*** certification Z-30.11-30 I as per DIN 55928, part 8 III as per DIN 55928, part 8 Applications
Z 275 hot-dip galvanized steel* > 99.0 % zinc (Z) Hot-dip galvanized ZMg 130 alloy-galvanized steel* (ZM) ZMg EcoProtect ZA 255 alloy-galvanized steel* (ZA) GALFAN AZ 185 alloy-galvanized steel** (AZ) GALVALUME > 98.0 % zinc 1.0 % magnesium 95.0 % zinc 5.0 % aluminium 55.0 % aluminium 43.4 % zinc 1.6 % silicium
Hoesch Trapezoidal Sheets, Hoesch Liner Trays and flashings. All composite panels (the official approval allows for a different galvanizing method for the reverse side (foam side). Hoesch Trapezoidal Sheets, Hoesch Liner Trays and flashings. All composite panels (the official approval allows for a different galvanizing method for the reverse side (foam side). All composite panels. The official approval allows for a different galvanizing method of the reverse side (foam side). Hoesch Trapezoidal Sheets and Hoesch Liner Trays. Composite panels in roof applications (the official approval allows for a different galvanizing method of the reverse side (foam side).
130
255
20
185
25
* Galvanized steel coil used as a substrate for additional coil coating systems ** Galvanized steel coil used mill finish *** German Institute for Building Technology
TK Bausysteme GmbH Hammerstrasse 11 D-57223 Kreuztal, Germany Phone: +49 / 27 32 / 599 1 221 Fax: +49 / 27 32 / 599 1 219 E-Mail: export.tks-bau@thyssenkrupp.com Internet: www.thyssenkrupp-bausysteme.com
All details contained in this brochure are only guaranteed insofar as they have been expressly and specifically confirmed in writing. Subject to technical modifications. GB Colour chart 7.2009 BC