Professional Documents
Culture Documents
www.umcproducts.com
2920 Airway Ave. Costa Mesa, Ca. 92626-2178 Phone: (714) 437-9600 Fax: (714) 437-9700
E-mail: info@umcmarine.com Web: http://www.umcmarine.com
Doors
Manholes
Hatches
2920 Airway Ave. Costa Mesa, Ca. 92626-2178 Phone: (714) 437-9600 Fax: (714) 437-9700
E-mail: info@umcmarine.com Web: http://www.umcmarine.com
Page 1 Volume 7
Manholes - Configurations and hardware combinations to meet your requirements. Multibolt manholes with raised coamings or flush screw.
Kevels, Single Bitts, Double Bitts, and Chocks. All models made of ASTM A27 cast steel. Custom sizes available by request.
WATER TIGHT DOORS - Doors available in 4-Dog, 6-Dog, and Quick Acting models. Offered in a variety of standard sizes and options. Replacement handles made of steel. aluminum also available. Custom sizes available by request
2920 Airway Ave, Costa Mesa, Ca. 92626 Tel.714.437.9600 Fax.714.437.9700 www.umcmarine.com
Page 2
Doors
Doors
Castings
Castings
Manholes
Manholes
Hatches
Hatches
T-Bolt Style
Hatches
Round - 18 & 20
This industry standard steel enclosure is based on the proven strongback style hatch and is operated by a single T-handle bolt. Its easy operation facilitates its convenient use while maintaining a near flush profile. Features: ? Made from high strength 3/8 steel for better impact resistance ? No tools required single bolt T-handle for secure engagement ? Stainless steel T-Handle and Brass Thread block uses dissimilar metals to prevent galling and ensure trouble free operation Hatch Clear (A) Outside (B) Technical ? Nitrile rubber gaskets ensure water tight seal Model Drawing Opening Diameter Also available in Galvanized Steel finish. UMC-430-18 18 (457mm) 20.75 (527mm) 01210-101A UMC-430-24 20 (508mm) 26.75 (679mm) 01220-101A
HATCH MATERIAL: Steel (ASTM A36) Painted Primer Grey HARDWARE: Tee Bolt Stainless Steel Thread Block - Brass Strongback Galvanized Steel Gasket Nitrile Rubber WasherBrass Handle Gasket - Nitrile Rubber B
Round - 20 & 22
This industry standard steel enclosure is also based on the proven strongback style hatch and is operated by a single 7/8 Stainless steel bolt. The simple design provides a secured hatch and flush deck profile. Features: ? Made from high strength 3/8 steel for better impact resistance ? 1-5/16 wrench required for single bolt secure engagement ? Stainless steel bolt and steel strongback provide Hatch Clear (A) Outside (B) Technical dissimilar metals to prevent galling and ensure trouble Model Drawing Opening Diameter free operation UMC-301-20 17.75(451mm) 20 (508mm) 08380-101A ? Nitrile rubber gaskets ensure Water tight seal ? Stainless steel chain ensures covers stay attached and UMC-301-22 19.75(502mm) 22 (559mm) 08381-101A never get lost
HATCH MATERIAL: Steel (ASTM A36) Painted Primer Grey HARDWARE: Bolt 7/8-9 Chain Hinge Pin Cotter Pin Washer Bolt Gasket Stainless Steel Stainless Steel Stainless Steel Stainless Steel Brass Nitrile Rubber A B
714-437-9600
Page 3
www.umcproducts.com
1
1.0 (25mm) .25 (6.3mm)
5.00 (127mm)
.88 (22mm)
.38 (9.6mm)
WELD
Deck
1.50 (38mm)
9 5
2 3
6
714-437-9600 714-437-9700 (FAX) info@umcproducts.com
SINGLE BOLT T-HANDLE STYLE 18 & 24 ROUGH OPENING MODEL 01210-101A - UMC-430-18 MODEL 01220-101A - UMC-430-24
DWG. NO. UMC-430
A B
WELD
6
Deck
714-437-9600 714-437-9700 (FAX) info@umcproducts.com
7 2
.38 (9.6MM) .38 (9.6MM)
3
Model Number UMC-301-20 UMC-301-22 Volume 7 Part Number 08380-101A 08381-101A
8
Weight LBS (KGS) 70 (32) 75 (34)
DIMENSIONS INCHES (MM) A B C 20 17.75 4 (508) (450) (102) 22 19.75 4 (559) (502) (102)
Page 4
Hatches
The Twist Lock hatch is a simple proven design for hatch enclosures. The twist engagement method for securing this hatch makes this the simplest hatch to operate. This hatch is made from high strength 3/8 cast steel with reinforced ribs. Built-in Lift-out handles are molded into the cover plate for convenience. Features: ? Low cost - high strength cast steel construction ? Lift-out grab handles Molded into cover casting ? Reinforced steel ribs on cover to provide greater impact resistance ? Galvanized steel chain ensures the cover stays attached and will never get lost
Hatch Model
UMC-474
Ullage Style
Round - 8 & 10
The Ullage hatch is a strong and secure method of enclosing a tank compartment while still providing easy single bolt operation for inspection or measuring of cargo. Available in 8 and 10 diameters. Features: ? Low cost - high strength cast steel construction. ? Cast Steel and Stainless Steel Dog handles (grease zerks Optional) ? Bronze tumble bolts for corrosion resistance and trouble free operation ? Bolts and nuts made from dissimilar metals to prevent galling and corrosion ? Simple Ullage arm hinge design allows for simple and clear access to port See Additional Products on the Hatch Matrix (p. 12)
Hatch Model
UMC-144 UMC-144-5 UMC-569-5
Technical Drawing
01242-102A 01242-104B 01243-101A
HATCH MATERIAL: Steel (ASTM A36) Painted Primer Grey HARDWARE: Tumble Bolt Dog Handle Ullage Arm Bolt 5/8-11 Nut 5-8-11 Washer Gasket Bronze Steel Steel Zinc Plated Steel Stainless Steel Stainless Steel Nitrile Rubber A B
714-437-9600
Page 5
www.umcproducts.com
24 (607mm) 20 (508mm)
Coaming Optional
.38 (10mm)
2 5
.69 (18mm)
8 9
3
1
5/8 COAMING
6
2
SINGLE BOLT ULLAGE HATCH 8 & 10 ROUGH OPENING MODEL 01242-102A - UMC-144 MODEL 01242-104B - UMC-144-5 MODEL 01243-101A - UMC-569-5
DWG. NO. UMC-144
Page 6
Hatches
Multi-Dog Style
Hatches
Multi-Dog Raised hatches are a strong and secure working enclosure system. They are universally used hardware on all kinds of commercial vessels from small workboats to ocean going cargo ships. Their simple design and quality steel construction help them meet the long range trouble free service requirements in the harshest environments. Features: ? Low cost - high strength cast steel construction ? Cast Steel and Stainless Steel Dog handles (available with grease zerks optional) ? Bronze tumble bolts for corrosion resistance and trouble Hatch free operation Model ? Bolts and nuts made from dissimilar metals to prevent galling and corrosion UMC-456-5
?
Number of Dogs
3 Dog 4 Dog
Technical Drawing
03410-101A 01230-101A
UMC-343-5
HATCH MATERIAL: Steel (ASTM A36) Painted Primer Grey HARDWARE: Tumble Bolt Dog Handle Bolt 5/8-11 Nut 5-8-11 Gasket -
Multi-Dog Style
Multi-Dog Raised hatches are a strong and secure enclosure system. They are universally used hardware on all kinds of commercial vessels. Features: ? Cast Steel and Stainless Steel dog handles (available with grease zerks optional) ? Bronze tumble bolts for corrosion resistance and trouble free operation ? Bolts and nuts made from dissimilar metals to prevent galling and corrosion See additional products on the Hatch Matrix (p. 10)
Hatch Model
Number of Dogs
2 Dog 4 Dog 4 Dog
Technical Drawing
01241-105A 01240-102A 03800-101A
UMC-274-5 15 x 23 (381 x 548 mm) UMC-174-5 15 x 23 (381 x 548 mm) UMC-464-5 18 x 24 (457 x 609 mm)
HATCH MATERIAL: Steel (ASTM A36) Painted Primer Grey HARDWARE: Tumble Bolt Dog Handle Bolt 5/8-11 Nut 5-8-11 Gasket Bronze Steel Zinc Plated Steel Stainless Steel Nitrile Rubber
714-437-9600
Page 7
www.umcproducts.com
3.41 (87mm)
3
4
6
.31 (8mm)
5 (127mm)
5 2
.38 (10mm)
MULTI-DOG RAISED HATCH 22 ROUGH OPENING MODEL 03410-101A - UMC-456-5 MODEL 01230-101A - UMC-343-5
DWG. NO. UMC-343
3
4
6
5 (127mm) .38 (10mm)
3.41 (87mm)
2
.38 (10mm)
A DIMENSIONS INCHES (MM) A B 15 (382) 23 (584) 15 (382) 18.25 (457) 23 (584) 24.25 (607) # OF DOGS 2 DOG 4 DOG 4 DOG Weight LBS (KGS) 91(41.2) 97(44) 106(48)
Page 8
Hatches
PC.NO. 1 2 3 4 5 6 7
DESCRIPTION COVER COAMING DOG HANDLE TUMBLE BOLT GASKET BOLT 5/8-11 NUT 5/8-11
MATERIAL STEEL STEEL STEEL BRASS NITRILE RUBBER ZINC PLATED STEEL STAINLESS STEEL
Multi-Dog Raised hatches are a strong and secure working enclosure system. The added Ullage hatch is likewise a strong and secure method of enclosing a tank compartment while still providing easy single-bolt operation for inspection or measuring of cargo. Features: ? Low cost - high strength cast steel construction ? Cast Steel and Stainless Steel Dog handles (grease zerks optional) ? Bronze tumble bolts for corrosion resistance and trouble free operation ? Bolts and nuts made from dissimilar metals to prevent galling and corrosion
?
Hatch Model
6
3.41 (87mm)
5 (127mm)
5 7
3.41 (87mm)
.38 (10mm)
7 (178mm)
MULTI-DOG RAISED HATCH 18X24 ROUGH OPENING W/ 8 ULLAGE MODEL 03800-130K - UMC-464-5/144
DWG. NO. UMC-174/144
Volume 7
UMCMarineHatchProductMatrixandSparePartsList
UMC274&UMC17415"X23"OvalMultiDogHatch
Cover Coaming Coaming Gasket Paint Material Material Height Material Spec 1 1 1 Desc/Quantity ST ST ST ST 1 ST ST ST ST ST 5" 5" 5" 12" 600mm 5" 5" NTRL NTRL 1 NTRL NTRL NONE NTRL NTRL PRIMER PRIMER Dog Handles 2 ST SS 4 PRIMER PRIMEREXTONLY PRIMEREXTONLY PRIMER PRIMER ST SS ST ST ST BR SS BR BR BR Tumble Bolt 2 BR SS 4 ST SS ST ST ST Lug Bolt 2 ST SS 4 ST SS ST ST ST ST SS 4 ST ST ST ST ST NO NO NO NO NO Lug Nut 2 ST SS NO NO Hinge Pin Hasp Lock
1 15"x23"4DogHatch Desc/Quantity 01240102A* Hatch,15x234Dog|StdPaint|NtrlGas ST 01240102B Hatch,15x234Dog|SPLPaint|NtrlGas|SSHw ST 01240112E Hatch,15x234Dog|SPLPaint ST 01240102E 01240102C Hatch,15x234Dog|StdPaint|NtrlGas|12"Coam ST Hatch,15x234Dog|StdPaint|NtrlGas|600mmCo ST
SS
SS
5"
NTRL
NONE
SS Dog Handles
01240302A 01240302B 01240302C
SS Tumble Bolt
NA
SS Lug Bolt
BR Lug Nut
02570802B
SS Hinge Pin
NO Hasp Lock
01240201A NA
UMC464503800SeriesMultiDogHatch18"x24"4dog
Cover Material 1 Desc/Quantity Hatch,18x244Dog|StdPaint|NtrlGas ST Hatch,18x244Dog|StdPaint|HDPack| ST Hatch,18x244Dog|SPLPaint|HDPack|Hasp ST Hatch,18x244Dog|SPLPaint|Hasp ST Hatch,18x244Dog|SplPaint ST Hatch,18x244Dog|SPLPaint|8"Coam ST Hatch,18x244Dog|SplPaint|FlaxPack|Hasp ST Hatch,18x244Dog|StdPaint|NtrlGas|SSDog Hatch,18x244Dog|ZincPaint|NtrlGas ST ST Coaming Material 1 ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST Coaming Gasket Height Material 1 5" NTRL 5" PTFE 5" PTFE 5" NONE 5" NONE 8" NONE 5" FLAX 5" 5" 5" 5" 5" 5" 8" 5" 5" 5" 5" 5" 5" NTRL NTRL PTFE NONE NONE NTRL NONE NTRL NONE NONE PTFE NTRL NONE Paint Spec PRIMER PRIMER PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY INTERPZINC22 PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY Dog Handles 4 ST ST ST ST ST ST ST SS SS SS SS ST/ZRK ST/ZRK ST/ZRK ST/ZRK ST/ZRK ST/ZRK NUTSS NUTSS NUTSS Tumble Bolt 4 BR BR BR BR BR BR BR SS SS SS SS SS SS SS SS BR BR BR BR BR Lug Bolt 4 ST ST ST ST ST ST ST ST ST SS SS SS SS SS ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST SS SS SS SS SS ST ST ST ST ST ST Lug Nut 4 ST ST ST ST ST ST ST ST ST SS SS SS SS SS SS ST ST ST ST ST NO NO YES YES NO NO YES NO NO YES YES YES NO YES NO NO YES YES YES YES Hinge Pin Hasp Lock
P/N 03800101A* 03800101F 03800101B 03800102A 03800101G 03800103A 03800101H 03800101C 03800101J
03800101D Hatch,18x244Dog|StdPaint|SSHw|HDPack|HaST 03800102D Hatch,18x244Dog|SPLPaint|SSHw|hasp ST 03800102E 03800102J 03800102U 03800101P 03800101E 03800102K Hatch,18x244Dog|SPLPaint|SSHw|ZerkDog|H ST Hatch,18x244Dog|SPLPaint|SSHw|ZerkDog|H ST Hatch,18x244Dog|8"Coam|SPLPaint|SSHw|ZeST Hatch,18x244Dog|SPLPaint|SSHw|ZerkDog|H ST Hatch,18x244Dog|StdPaint|ZerkDog ST Hatch,18x244Dog|StdPaint|ZerkDog|Hasp ST ST ST ST
03800101M Hatch,18x244Dog|SplPaint|HDPack|Hasp 03800101MN Hatch,18x244Dog|SplPaint|NtrlGas|Hasp 03800102M Hatch,18x244Dog|SplPaint|Hasp AllStainlessSteelHatchStainlessCoverandCoaming 03800101S SSHatch,18x244Dog|SS/BR|MetricM16 03800101T SSHatch,18x244Dog|SS/BR|HDPack 03800102T SSHatch,18x244Dog|SS/BR
SS SS SS
SS SS SS
SS SS SS
BR BR BR
SSM16 SS SS
BZM16 BZ BS
SS SS SS
NO NO NO
Dog Handles
01240302A 01240302B 01240302C 01240312A NA NA
Tumble Bolt
NA
Lug Bolt
Lug Nut
NA NA NA 01230803A
Hinge Pin
Hasp Lock
01240201A NA NA NA NA NA NA NA
56020012SS NA
01230804A NA
UMCMarineHatchProductMatrixandSparePartsList
UMC45603410SeriesMultiDogHatch12"Round3Dog
Cover Material 1 Desc/Quantity Hatch,12"Rnd3Dog|StdPaint|NtrlGas ST Hatch,12"Rnd3Dog|SplPaint|HDpack|Hasp ST Hatch,12"Rnd3Dog|SplPaint ST Coaming Material 1 ST ST ST Coaming Gasket Height Material 1 5" NTRL 5" PTFE 5" NONE Paint Spec PRIMER PRIMEREXTONLY PRIMEREXTONLY Dog Handles 3 ST ST ST Tumble Bolt 3 BR BR BR Lug Bolt 3 ST ST ST ST ST ST Lug Nut 3 Hinge Pin 1 ST ST ST Hasp Lock NO YES YES
18"CoamingHatches 03410102A Hatch,12"Rnd3Dog|SplPaint|18"Coam 03410101B Hatch,12"Rnd3Dog|SplPaint|HDpack|18"Coam 03410101C 03410103C 03410101E 03410103E 03410103J Hatch,12"Rnd3Dog|SplPaint|SSHw|HDpack|Hasp Hatch,12"Rnd3Dog|SplPaint|SSHw|Hasp Hatch,12"Rnd3Dog|SPlPaint|NtrlGas|ZerkDog Hatch,12"Rnd3Dog|SPlPaint|ZerkDog Hatch,12"Rnd3Dog|SPlPaint|ZerkDog|8"Coaming
ST ST ST ST ST ST ST
ST ST ST ST ST ST ST
BR BR SS SS BR SS SS Tumble Bolt
NA
ST ST SS SS ST SS SS Lug Bolt
ST ST SS SS ST SS SS Lug Nut
02570802B NA
ST ST SS SS ST SS SS Hinge Pin
01240201A NA NA NA
UMC34301230SeriesMultiDogHatch19"Round4Dog
Cover Material 1 Desc/Quantity ST ST ST ST ST ST Coaming Material 1 ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST Coaming Gasket Height Material 1 5" NONE 5" NONE 5" PTFE 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" NONE PTFE NONE NONE NTRL PTFE NTRL NONE NTRL NTRL PTFE NONE PTFE Paint Spec PRIMER PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMER PRIMER PRIMER PRIMEREXTONLY PRIMER PRIMER PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY Dog Handles 4 ST ST ST SS SS SS FLNGNUTSS FLNGNUTSS FLNGNUTSS FLNGNUTSS STDNUTSS STDNUTSS STDNUTSS STDNUTSS ST/ZRK ST/ZRK Tumble Bolt 4 BR BR BR SS SS SS BR BR BR SS SS SS SS SS BR BR Lug Bolt 4 ST ST ST ST SS SS ST ST ST SS SS SS SS SS ST ST ST ST ST ST SS SS ST ST ST SS SS SS SS SS ST ST Lug Nut 4 Hinge Pin 1 ST ST ST ST SS SS ST ST ST SS SS SS SS SS ST ST Hasp Lock NO YES NO NO NO NO NO NO NO NO NO NO NO NO YES NO
01230102M Hatch,19"Rnd4Dog|StdPaint|SSNutNoDog ST ST 01230101MN Hatch,19"Rnd4Dog|StdPaint|NtrlGas|SSNutNoDog 01230101M Hatch,19"Rnd4Dog|StdPaint|HDPack|SSNutNoDog ST 01230101J Hatch,19"Rnd4Dog|SplPaint|NtrlGas|SSHw|SSNutNoDST 01230111D 01230101G 01230101F 01230101D Hatch,19"Rnd4Dog|StdPaint|SSHw|SSNutNoDog ST Hatch,19"Rnd4Dog|StdPaint|NtrlGas|SSHw|SSNutNoDST Hatch,19"Rnd4Dog|SplPaint|NtrlGas|SSHw|SSNutNoDST Hatch,19"Rnd4Dog|SplPaint|HDpack|SSNutNoDog ST ST ST
01230111K Hatch,19"Rnd4Dog|SplPaint|ZerkDog|Hasp 01230101K Hatch,19"Rnd4Dog|SplPaint|HDpack|ZerkDog AllStainlessSteelHatchStainlessCoverandComaing 01230111T SSHatch,19"Rnd4Dog|SplPaint|SS/BR 01230101T SSHatch,19"Rnd4Dog|SplPaint|HDPack|SS/BR 01230101S SSHatch,19"Rnd4Dog|SplPaint|SS/BR|MetricM16
SS SS SS
SS SS SS
SS SS SS Dog Handles
01240302A 01240302B 01240302C 01240312A 56020012SS 01230802A NA NA
BR BR BR Tumble Bolt
NA
SS SS SS Hinge Pin
NO NO NO Hasp Lock
01240201A NA NA NA NA NA NA NA NA NA NA
01230804A NA
Page 11
Volume 7
UMCMarineHatchProductMatrixandSparePartsList
UMC144&UMC569UllageStyleHatch
Cover Coaming Clear Coaming Gasket Paint Material Material Opening Height Material Spec 1 1 1 Desc/Quantity ST ST ST ST ST ST ST SS ST ST ST ST ST ST ST SS ST ST ST ST ST ST ST ST ST ST ST ST 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 5" 5" 5" 5" 5" 12" 12" 12" 12" 12" 12" 12" NTRL NONE NTRL PTFE NONE NONE NONE NTRL NTRL PTFE PTFE NONE NONE NTRL NTRL PTFE PTFE NONE NONE NTRL PRIMER PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY NONE PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY Dog Handles 1 ST ST SS SS SS ST/ZRK SS/ZRK SS ST/ZRK ST/ZRK ST/ZRK ST/ZRK ST/ZRK ST ST ST ST ST ST ST/ZRK Tumble Bolt 1 BR5" BR5" SS5" SS5" SS5" SS5" BR5" BR5" BR5.6" BR5.6" BR5.6" BR5.6" BR5.6" BR5.6" BR5.6" BR5.6" BR5.6" BR5.6" BR5.6" SS5.6" Lug Bolt 1 BR BR SS SS SS SS BR SSM16 BR BR BR BR BR BR BR BR BR BR BR SS SS SS SS SS SS SS SS BRM16 SS SS SS SS SS SS SS SS SS SS SS SS Lug Nut 1 NO NO NO NO NO NO NO NO NO NO YES NO YES NO YES NO YES NO YES YES Hasp Lock
01242102B Hatch,Ullage8"|SPLPaint|NtrlGas|7/8"Coam|SSHw 01242103B Hatch,Ullage8"|SPLPaint|HDPack|7/8"Coam|SSHw 01242102C Hatch,Ullage8"|SPLPaint|7/8"Coam|SSHw 01242102J Hatch,Ullage8"|SPLPaint|7/8"Coam|SSHw|ZerkDog 01242102K Hatch,Ullage8"|SPLPaint|7/8"Coam|ZerkDog 01242102S SSHatch,Ullage8"|7/8"Coam|SSHw|MetricM16 01242104B 01242104A 01242104C 01242114A 01242114C 01242116A 01242105B 01242105A 01242105C 01242106A 01242106C
Hatch,Ullage8"|SPLPaint|NtrlGas|5"Coam|ZerkDog ST Hatch,Ullage8"|SPLPaint|HDPack|5"Coam|ZerkDog ST Hatch,Ullage8"|SPLPaint|HDPack|5"Coam|ZerkDog|HaST Hatch,Ullage8"|SPLPaint|5"Coam|ZerkDog ST Hatch,Ullage8"|SPLPaint|5"Coam|ZerkDog|Hasp ST Hatch,Ullage8"|SPLPaint|NtrlGas|12"Coam Hatch,Ullage8"|SPLPaint|NtrlGas|12"Coam|Hasp Hatch,Ullage8"|SPLPaint|HDPack|12"Coam Hatch,Ullage8"|SPLPaint|HDPack|12"Coam|Hasp Hatch,Ullage8"|SPLPaint|12"Coam Hatch,Ullage8"|SPLPaint|12"Coam|Hasp ST ST ST ST ST ST
ST ST
ST ST ST ST SS SS
SS SS SS SS SS SS Lug Bolt
SS SS SS SS SS BR Lug Nut
01240302A NA 01240302B
01240801B 02570802A NA NA
Volume 7
Page 12
Page 13
Volume 7
UMCMarineHatchProductMatrixandSparePartsList
UMC1745w/144ULLAGECOMBO15"X23"WITH8"ULLAGE
Cover Material 1 Desc/Quantity ST ST Coaming Material 1 ST ST Coaming Height 5" 5" Gasket Material 1 NONE PTFE Paint Spec PRIMEREXTONLY PRIMEREXTONLY Dog Handles 4 ST ST Dog Handles
01240302A NA NA
HatchCombo,15x234Dogw/Ullage HatchCombo,15x234Dogw/Ullage|HDPack
Ullage DogHndl 1 ST ST
Ullage Tumble 1 BR BR
01240801A 03570805A NA
01242102E 01240302A NA
01240201A NA NA NA
01240208B NA
UMC4645w/144ULLAGECOMBO18"x24"WITH8"ULLAGE
Cover Material 1 Desc/Quantity HatchCombo,18x244Dogw/Ullage|SSHw|NtrlGas ST HatchCombo,18x244Dogw/Ullage|NtrlGas|Hasp ST HatchCombo,18x244Dogw/Ullage|HDPack|Hasp ST HatchCombo,18x244Dogw/Ullage|SSHw|ZerkDog|Hasp HatchCombo,18x244Dogw/Ullage|ZerkDog|Hasp ST ST ST ST ST Coaming Material 1 ST ST ST ST ST ST ST ST Coaming Height 5" 5" 5" 5" 5" 5" 5" 5" Gasket Material 1 NTRL NONE PTFE NONE NONE PTFE NITRILE NONE Paint Spec PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY PRIMEREXTONLY Dog Handles 4 SS ST ST ST/ZRK ST/ZRK NUTSS NUTSS NUTSS Tumble Bolt 4 SS BR BR SS BR BR BR BR Lug Bolt 4 ST ST ST SS ST ST ST ST ST ST ST SS ST ST ST ST Lug Nut 4 Hinge Pin 1 ST ST ST SS ST ST ST ST Hasp Lock NO YES YES YES YES YES YES YES Ullage Hatch 1 ST ST ST ST ST ST ST ST Ullage DogHndl 1 SS ST ST ST/ZRK ST/ZRK ST/ZRK ST/ZRK ST/ZRK Ullage Tumble 1 SS BR BR SS BR BR BR BR Ullage LugBolt 3 SS BR BR SS BR BR BR BR Ullage LugNut 3 SS SS SS SS SS SS SS SS
SS
SS
5"
NONE
NONE
SS
BR
SSM16
BZM16
SS
NO
SS
SS
BR
SSM16
BZM16
Definitions NTRL=NITRILERUBBERGASKETFOR18"X24"03800701A NITRILERUBBERGASKETFOR8"ULLAGE01242701A PTFE=BRAIDEDTFEPACKINGFOR18"X24"HATCH03800701B BRAIDEDTFEPACKINGFOR8"ULLAGE01242701B FLAX=BRAIDEDFLAXPACKING03800701C NONE=NOGASKETPROVIDED PRIMER=GREYPRIMERFINISHONALLSURFACES PRIMEREXTONLY=GREYPRIMERFINISHONEXTERIOR INTERPZINC22=INTERPZINC22PRIMER01051902A
Dog Handles
01240302A 01240302B 01240302C 01240312A
Tumble Bolt
NA
Lug Bolt
Lug Nut
Hinge Pin
Hasp Lock
Ullage Hatch
Ullage LugBolt
NA
Ullage LugNut
03570805A
01240201A NA
56020012SS NA NA NA NA NA
01230804A NA
01230803A NA
Volume 7
Page 14
Oval - Manholes
UMCs complete line of multi-bolt manholes serves as a great inexpensive option for applications where frequent access is not required. Ideal for tank top covers, fuel and water tank access, inspection access to ship voids, barges, sanitary and digester tanks, clean outs and more. These water-tight manholes feature simple designs and utilize high strength steel. Model: 08866-101F - Flush Screw UMC offers a complete line of manholes with configurations and hardware combinations to meet your requirements. These industry-standard manholes are used on workboats, and equipment worldwide. UMCs simply-designed manholes have served the industrial marine and fishing industries for the past 30 years. Model: 08866-101S - Weld Stud FEATURES: ? High strength carbon steel construction ? Hardware combinations of dissimilar metal prevent galling and corrosion (Not available on all models see Manhole Matrix for details) ? High-quality neoprene rubber gaskets ensure water-tight seal (oil resistant Buna-N Optional) ? Neoprene Gasket material is UV resistant to prevent cracking and memory fatigue Model: 02590-101A - Weld Stud, Combo B ? Flush screw-down models offer a smooth-surfaced manhole that prevents catching and snagging ? Speciality features such as 3 NPT fill points and handles available on some models ? Raised coamings available on certain models For more details about all of the manholes available please see the complete feature set matrix available on the technical drawing.
Manholes
Model: 02570-101A- Raised Combing, Combo B See Additional Models on Manhole Matrix. (P. 18)
714-437-9600
Page 15
www.umcproducts.com
Oval - Manholes
26 bolt manholes are another industry standard model offered by UMC Marine. Typically used for specific application of increased air or water pressure. All of our manholes meet the ABS (American Bureau of Shipping) requirements for design and materials. Model: 02610-101A - Flush Screw, 26 Bolt See Additional Models on Manhole Matrix. (p. 18)
The 18 x 24 manholes feature many of the same configuration and hardware combinations featured on the standard size manhole. See the complete line of 18 x 26 manholes on the manhole product matrix. (P. 40)
Model: 02600-101A - Weld Bolt, Combo B See Additional Models on Manhole Matrix. (p. 18)
Model: 08451-101A - Raised Combing, Combo A See Additional Models on Manhole Matrix. (p. 18)
WELD BOLT - Combo A
WELD STUD
714-437-9600
Volume 7
www.umcproducts.com
Manholes
Oval - Manholes
7
WELD
Deck
3
WELD
EXAMPLE: NON-WELD C
Manholes
B B
Page 17
A (W)
15 x 23 26 BOLT PATTERN
2
WELD
4
Deck
Deck
WELD
A (L) B (L)
4
Deck
3
A (W)
18x 24 24 BOLT PATTERN
4
Deck
Volume 7
3 NPT PLUG RAISED PLUG STUD WELD FLUSH PLUG STUD WELD 3/4-10 2.25 3/4-10 2.25 15 15 23 23 21 21 29 29 .393 .393 .787 N/A 125 .787 N/A 125 SS SS BR BR SS SS BUNA N BUNA N
15 x 23 BMHC15X23-26F BMHC15X23-26D
26 Bolt Flush 02610-101A 02590-102SA UMC-505 FLUSH SCREW 5/8-11 1.25 TAP RING 5/8-11 1 15 15 23 23 22 21 30 29 .51 .393 1.125 N/A 160 .787 N/A 95 SS SS BR BUNA N BUNA N
15 x 23
20 Bolt Raised UMC-501 NON WELD NON WELD 5/8-11 1.75 5/8-11 1.75 15 15 23 23 20 20 28 28 .393 .393 .375 2.5 .375 4 85 95 ZN SS SS BR BR BR BUNA N BUNA N
18 x 24 BMHC18X24BZ
24 Bolt Flush 02600-101A UMC-504 WELD BOLT 5/8-11 2.25 18 24 24 30 .393 .787 N/A 112 ZN ZN BR BUNA Y
18 x 24
24 Bolt Raised UMC-502 NON-WELD 5/8-11 1.75 18 24 23 29 .393 .375 2.5 106 ZN SS BR BUNA N
BMHC18X24X2.5BZ 02580-101A
18 Round BMHC18BR BMHC18SS-FLAX BMHC18SS BMHC18SS-9 14 Round BMHC14BR BMHC14BR-FLAX BMHC14SS BMHC14SS-4.5 10 Round BMHC10U
Raised 08450-101A 08450-101B 08450-102B 08450-121B Raised 08451-101A 08451-101B 08451-102B 08451-112B 12 Bolt Flush 08866-110A WELD BOLT 5/5-11 2.25 10 10 16 16 .393 .787 N/A 48 SS BR SS BUNA N UMC-154-14 UMC-154-14 UMC-154-14 UMC-154-14 NON WELD NON WELD NON WELD NON WELD 5/8-11 2 5/8-11 2 5/8-11 2 5/8-11 2 14 14 14 14 14 14 14 14 19 19 19 19 19 19 19 19 .393 .393 .393 .393 .393 2.5 .393 2.5 .393 2.5 .393 4 55 55 55 68 ZN SS SS SS BR SS SS SS BUNA N FLAX N BUNA N BUNA N UMC-154-18 UMC-154-18 UMC-154-18 UMC-154-18 NON WELD NON WELD NON WELD NON WELD 5/8-11 2 5/8-11 2 5/8-11 2 5/8-11 2 18 18 18 18 18 18 18 18 23 23 23 23 23 23 23 23 .393 .393 .393 .393 .393 2.5 .393 2.5 .393 2.5 .393 9 78 78 78 85 ZN SS SS SS BR SS SS SS BUNA N FLAX N NONE N FLAX N
714-437-9600
www.umcproducts.com
Manholes
Kevel Chocks
C B D A
MODEL UMC-30
DESCRIPTION
PART # A 24 (610) 30 (762) 36 (914) 42 (1066) 48 (1219) B 3 (76) 3.25 (83) 4 (101) 4.75 (121) 5.5 (140) C 7.5 (190) 9.5 (241) 11 (279) 12.5 (318) 14 (356)
UMC-KC30 KEVEL CHOCK, 30 01081-301A UMC-482 UMC-483 UMC-484 KEVEL CHOCK, 36 01080-301A KEVEL CHOCK, 42 01090-301A KEVEL CHOCK, 48 01100-301A
DIMENSIONS IN INCHES (MM) D E F G H 4 5.63 5.13 2.25 3.25 (101) (143) (130) (57) (83) 4 7 5.62 2.38 6.88 (101) (178) (143) (60) (175) 5 8 6.75 3.25 8.25 (127) (203) (171) (83) (210) 6 9 7.88 4.13 9.63 (152) (229) (200) (104) (245) 7 10 9 5 11 (178) (254) (229) (127) (279)
Large Kevels
C B
Castings
.56 (14mm)
F
.56 (14mm)
DESCRIPTION PART # KEVEL, 36 KEVEL, 42 01050-301A 01060-301A 01070-301A A 36 (914) 42 (1067) 48 (1219)
UMC-159A KEVEL, 48
DIMENSIONS IN INCHES (MM) B C D E 5 10 7.13 5.88 (127) (254) (181) (149) 6 11 7.5 6.5 (152) (279) (191) (165) 6.5 11 10 8.75 (165) (279) (254) (222)
X-Large Kevels
C B A
.75 (19mm)
F
.75 (19mm)
F 1.25 (32)
G N/A (N/A)
H 32.5 (826)
I 38 (965)
714-437-9600
Page 19
www.umcproducts.com
B D A
N L J
MODEL
DESCRIPTION
DIMENSIONS IN INCHES (MM) F G H I J K 7.88 4.13 9.63 20 26.75 .63 (200) (105) (245) (508) (679) (16)
L J
MODEL
DESCRIPTION
DIMENSIONS IN INCHES (MM) F G H I J K 13 8.25 6 18 24 .63 (330) (210) (152) (457) (607) (16)
714-437-9600
Volume 7
www.umcproducts.com
Castings
Small Kevels
E F A
MODEL
DESCRIPTION
DIMENSIONS IN INCHES (MM) D E F G H 12 1.5 .75 2.5 .5 (305) (38) (19) (64) (13)
D C E B
I .63 (16)
J .5 (13)
F
K .63 (16)
MODEL
DESCRIPTION
F 1.38 (35)
G .88 (22)
Castings
E F
G B
MODEL UMC-518
DESCRIPTION KEVEL, 18
G 4.75 (121)
H .88 (22)
Button Chocks
B A F G D
E C H
PART # 01160-301A 01180-301A A 6 (152) 8.6 (218) 10 (254) B 8.5 (216) 12.5 (318) 15 (381)
DIMENSIONS IN INCHES (MM) C D E F 12 4.13 1.13 R .75 (305) (181) (105) (89) 13 5.75 2 .38 (330) (146) (51) (10) 17 8.5 N/A .5 (432) (216) (N/A) (13)
714-437-9600
Page 21
www.umcproducts.com
Open Chocks
PART # 07870-301A 06242-301A A 9 (229) 12 (305) B 27.75 (705) 36 (914) C 10.13 (257) 13.38 (340)
DIMENSIONS IN INCHES (MM) D E F G 12 3 R 2.06 1.5 (305) (76) (52) (38) 16 4 R 2.63 2.63 (406) (101) (67) (67)
Closed Chocks
E B G D H
MODEL
DESCRIPTION
PART # 04610-301A 06240-301A 06241-301A A 9 (229) 12 (305) 14 (356) B 27.75 (705) 36 (914) 42 (1066) C 10.13 (257) 13.38 (340) 15.63 (397)
DIMENSIONS IN INCHES (MM) D E F G H 12 5.25 6 2.06 1.5 (305) (133) (152) (52) (38) 16 7 8 2.63 1.88 (406) (178) (203) (67) (48) 18.75 8.17 9.38 3.06 2.19 (476) (208) (239) (78) (56)
714-437-9600
Volume 7
www.umcproducts.com
Castings
Panama Chocks
G
A C
F E
MODEL
DESCRIPTION
A UMC-1014 PANAMA CHOCK,10X14 08370-301A 10 (152) UMC-1218 PANAMA CHOCK,12X18 08372-301A 12 (218)
DIMENSIONS IN INCHES (MM) C D E F 28 27.25 14 .75 (305) (181) (105) (89) 33 31.5 14 1.13 (330) (146) (51) (10)
G 5 R (19) 6 R (22)
Castings
Mooring Eyes
A E
H G J
A C E
J H G
I B
MODEL
DESCRIPTION
A UMC-1218E MOORING EYE 12X18 08371-301A 12 (229) UMC-M812 MOORING EYE 8X12 08750-301A 8 (305)
DIMENSIONS IN INCHES (MM) D E F G H N/A 27 33 14 1.13 (133) (152) (52) (38) 13.31 19 15 17.5 5.25 1.25 (340) (483) (178) (203) (67) (48) C N/A
714-437-9600
Page 23
www.umcproducts.com
Single Bitts
THRU DECK STYLE
D
.75 (19mm)
G A I B
.75 (19mm)
G A I B
1 (25mm)
C
E F
MODEL UMC-492
DESCRIPTION
STYLE THRU DECK HEAVY DUTY THRU DECK THRU DECK FLUSH WLD
PART # 03720-301A 08000-301B 01142-301A 01140-301A A 8 (203) 8 (203) 10 (254) 10 (254) B 21 (533) 16 (406) 18 (457) 18 (457)
SINGLE BITT 8 SQUARE BASE UMC-530 SINGLE BITT 8 ROUND BASE UMC-SB10-T SINGLE BITT 10 ROUND BASE UMC-SB10 SINGLE BITT 10 ROUND BASE
DIMENSIONS IN INCHES (MM) C D E F G 12 12 9.63 14 5 (305) (305) (245) (356) (127) 11 12 10.25 14 6 (279) (305) (260) (356) (152) 12 13.5 10 14 8 (305) (343) (254) (356) (203) N/A 13.5 N/A 14 8 (343) (356) (203)
LBS (KGS) 370 (168) 260 (117) 293 (132) 190 (86)
D-Rings
A
MODEL UMC-196
DESCRIPTION D-RING
714-437-9600
Volume 7
www.umcproducts.com
Castings
.75 (19mm)
Double Bitts
A E
B I
G F
DIMENSIONS IN INCHES (MM) D E F G H 11 8 7 2 2 (279) (203) (177) (51) (51) 13.5 9 9 2.25 2 (343) (228) (228) (57) (51)
L M
Castings
DOUBLE BITTS WITH HORNS MODEL UMC-2A UMC-40A DESCRIPTION DOUBLE BITT 8 WITH HORNS DOUBLE BITT 10 WITH HORNS DIMENSIONS IN INCHES (MM) K L 04200-301A SEE DIMENSIONS FOR UMC-2 ABOVE 10 3.5 (254) (89) 03760-301A SEE DIMENSIONS FOR UMC-2 ABOVE 11 3.5 (279) (89) PART # LBS (KGS) 331 (150) 579 (262)
M .3 (8) .3 (8)
F J G
C K
PART # A 05970-301A 60 (1524) 01121-301A 66 (1676) B 18 (457) 21 (533) C 25.5 (647) 26.25 (667)
DIMENSIONS IN INCHES (MM) D E F G H 15 13.5 12 5.4 3 (381) (343) (305) (137) (83) 17.5 13 14 5.7 3.5 (445) (343) (356) (145) (89)
I 1 (25) 1 (25)
714-437-9600
Page 25
www.umcproducts.com
Roller Buttons
C D E
B G
F A
PART # 08670-152A A 12.5 (317) 16.65 (423) 14.86 (377) B 5.29 (134) 6.8 (173) 7.88 (200)
DIMENSIONS IN INCHES (MM) C D E F 11 8 5.5 1 (279) (203) (138) (25) 12.5 7.75 6 .83 (316) (197) (152) (21) 15 9.25 7 1 (381) (235) (178) (25)
MODEL
DESCRIPTION
PART # 08674-101A
C
A 17 (432)
B 8.03 (204)
G 1.7 (43)
G E F D A
MODEL UMC-927
DIMENSIONS IN INCHES (MM) C D E F G 7.88 5.63 1 2.44 2.83 (194) (143) (25) (62) (72)
714-437-9600
Volume 7
www.umcproducts.com
Castings
C E G
MODEL
DESCRIPTION
PART # 02802-302A 02802-303A A 12.75 (32) 12.75 (32) B 12.75 (32) 12.75 (32)
DIMENSIONS IN INCHES (MM) C D E F 6.75 .75 4.75 12 R (17) (2) (12) (30.4) 8.75 .75 6.75 12 (22) (2) (17) (30.4)
G 4 R (10) 6 R (15)
Castings
H F
DESCRIPTION
STYLE
PART # A 02802-301A 8.75 (22) 02802-304A 16.75 (42.5) 02802-305A 17.5 (44.5) B 8.75 (22) 16.75 (42.5) 17.5 (44.5)
CORNER CASTING LH/RH #6 CORNER CASTING LH/RH 6R x 4R x 16.75LG CORNER CASTING LH/RH 6R x 8.75R x 17.5LG
DIMENSIONS IN INCHES (MM) C D E F G 8.75 .75 2 2 2 (22) (2) (5) (5) (5) 6.75 .75 4 (17) (2) (10) 8.75 .75 4.75 10.75 2 (22) (2) (12) (27) (5)
714-437-9600
Page 27
www.umcproducts.com
D E G
MODEL
DESCRIPTION
PART # 02802-302A
DIMENSIONS IN INCHES (MM) A B C D E F G 24.375 24.375 7.625 11 .75 6.375 R 6.375 R (62) (62) (19) (28) (2) (16.2) (16.2)
B G I G C J
B G
02801-311A RH 02801-312A LH
02801-316 RH 02801-317 LH
A
A D B
H D B
MODEL
DESCRIPTION
PART # A 02801-311A 24.38 (61.9) 02801-312A 24.38 (61.9) 02801-316A 24.38 (61.9) 02801-317A 24.38 (61.9) B 11 (28) 11 (28) 11 (28) 11 (28) C 7.625 (19.4) 7.625 (19.4) 7.625 (19.4) 7.625 (19.4)
D-2401-S-RH CORNER, CAST RIGHT HAND D-2401-S-LH CORNER, CAST LEFT HAND E-2656-S-RH CORNER, CAST RIGHT HAND E-2656-S-LH CORNER, CAST LEFT HAND
DIMENSIONS IN INCHES (MM) D E F G H 12 2 7.12 .75 6.375 (30.4) (5) (18) (2) (16.2) 12 2 7.12 .75 6.375 (30.4) (5) (18) (2) (16.2) 12 2 7.12 .75 6 (30.4) (5) (18) (2) (16.2) 12 2 7.12 .75 6 (30.4) (5) (18) (2) (16.2)
LBS (KGS) 145 (65.7) 145 (65.7) 135 (61.2) 135 (61.2)
714-437-9600
Volume 7
www.umcproducts.com
Castings
Watertight Door
4-dog Style
UMC's line of Water-tight doors are fabricated from high quality plate steel. These doors are built to provide continuous troublefree use on all kinds of industrial marine applications. Various standard sizes are available with alternate handle placement.
MODEL # UMC-WTD-4D 26x54-R UMC-WTD-4D 26x54-L UMC-WTD-4D 26x60-R UMC-WTD-4D 26x60-L UMC-WTD-4D 30x60-R UMC-WTD-4D 30x60-L
DESCRIPTION 4-Dog Door 26 x 54 Right Hand 4-Dog Door 26 x 54 Left Hand 4-Dog Door 26 x 60 Right Hand 4-Dog Door 26 x 60 Left Hand
WEIGHT DIMENSIONS A B 200 lbs 200 lbs 220 lbs 220 lbs 250 lbs 250 lbs RH LH RH LH RH LH 26 26 26 26 30 30 54 54 60 60 60 60 UMC-WTD-4D-30X60-R- Right-Handed door DOOR MATERIAL: Steel (ASTM A36) Painted Primer Grey Door handing can be determined by standing on the outside of the compartment with the door swinging toward you. Right-handed doors will have the hinges on the right from this perspective. Conversely, a left-handed door will have the hinges on the left.
4-Dog Door 30 x 60 06111-101E Right Hand 4-Dog Door 30 x 60 06111-101F Left Hand
Watertight Door
6-dog Style
UMC's line of Water-tight doors are fabricated from high quality plate steel. These doors are built to provide continuous troublefree use on all kinds of industrial marine applications. Various standard sizes are available with alternate handle placement.
Doors
MODEL # UMC-WTD-6D 26x60-R UMC-WTD-6D 26x60-L UMC-WTD-6D 30x60-R UMC-WTD-6D 30x60-L UMC-WTD-6D 30x66-R UMC-WTD-6D 30x66-L UMC-WTD-6D 30x72-R UMC-WTD-6D 30x72-L
DESCRIPTION 6-Dog Door 26 x 60 Right Hand 6-Dog Door 26 x 60 Left Hand 6-Dog Door 30 x 60 Right Hand 6-Dog Door 30 x 60 Left Hand 6-Dog Door 30 x 66 Right Hand 6-Dog Door 30 x 66 Left Hand 6-Dog Door 30 x 72 Right Hand 6-Dog Door 30 x 72 Left Hand
PART #
WEIGHT DIMENSIONS A B 26 26 30 30 30 30 30 30 60 60 60 60 66 66 72 72 UMC-WTD-6D-30X72-R- Right-Handed door DOOR MATERIAL: Steel (ASTM A36) Painted Primer Grey Door handing can be determined by standing on the outside of the compartment with the door swinging toward you. Righ-handed doors will have the hinges on the right from this perspective. Conversely a left-handed door will have the hinges on the left.
06121-101C 270 lbs RH 06121-101D 270 lbs LH 06121-101E 06121-101F 300 lbs RH 300 lbs LH
06121-101G 330 lbs RH 06121-101H 330 lbs LH 06121-101I 06121-101J 350 lbs RH 350 lbs LH
714-437-9600
Page 29
www.umcproducts.com
B OPENING
WATERTIGHT DOOR
4 DOG HANDLE LH/RH OPTION VARIOUS STANDARD SIZES MODEL SERIES UMC-WTD-4D 06111 SERIES
A OPENING
DWG. NO. UMC-WTD-4D
B OPENING
WATERTIGHT DOOR
6 DOG HANDLE LH/RH OPTION VARIOUS STANDARD SIZES MODEL SERIES UMC-WTD-6D 06121 SERIES
A OPENING Volume 7
DWG. NO. UMC-WTD-6D
Page 30
Doors
Watertight Door
UMC's line of Water-tight doors are fabricated from high quality plate steel. These doors are built to provide continuous troublefree use on all kinds of industrial marine applications. Various standard sizes are available with alternate handle placement.
MODEL # DESCRIPTION PART # WEIGHT DIMENSIONS A B RH LH RH LH RH LH RH LH 26 26 30 30 30 30 30 30 60 60 60 60 66 66 72 72 UMC-WTD-QA-30X72-R- Right Handed door DOOR MATERIAL: Steel (ASTM A36) Painted Primer Grey Door handing can be determined by standing on the outside of the compartment with the door swinging toward you. Right handed doors will have the hinges on the right from this perspective. Conversely a left handed door will have the hinges on the left.
UMC-WTD-QA Quick Acting Door 26x60-R Right Hand 26 x 60 UMC-WTD-QA Quick Acting Door 26x60-L Left Hand 26 x 60 UMC-WTD-QA Quick Acting Door 30x60-R Right Hand 30 x 60 UMC-WTD-QA Quick Acting Door 30x60-L Left Hand 30 x 60 UMC-WTD-QA Quick Acting Door 30x66-R Right Hand 30 x 66 UMC-WTD-QA Quick Acting Door 30x66-L Left Hand 30 x 66 UMC-WTD-QA Quick Acting Door 30x72-R Right Hand 30 x 72 UMC-WTD-QA Quick Acting Door 30x72-L Left Hand 30 x 72
06122-101C 320 lbs 06122-101D 320 lbs 06122-101E 350 lbs 06122-101F 350lbs 06122-101G 385 lbs 06122-101H 385 lbs 06122-101I 410 lbs
Handle Assy
Replacement door handles are available in cast steel and cast aluminum. These handles fit all UMC Universal Multi-dog Doors.
Doors
MODEL # UMC-DHR-A UMC-DHL-A UMC-DHR-S UMC-DHL-S DESCRIPTION Handle Assy, Door Right Hand Aluminum Handle Assy, Door Left Hand Aluminum Handle Assy, Door Right Hand Steel Handle Assy, Door Left Hand Steel PART # 08340-105A 08340-105B 08340-101A 08340-101B WEIGHT HANDLE 2.2 lbs 2.2 lbs 6 lbs 6 lbs RH LH RH LH
UMC-DHR-S UMC-DHL-S
Door handing can be determined by standing on the outside of the compartment with the door swinging toward you. Right handed doors will have the hinges on the right from this perspective. Conversely a left handed door will have the hinges on the left.
714-437-9600
Page 31
www.umcproducts.com
B OPENING
A OPENING
WATERTIGHT DOOR
QUICK ACTING LH/RH OPTION VARIOUS STANDARD SIZES MODEL SERIES UMC-WTD-QA 06122 SERIES
DWG. NO. UMC-WTD-QA
Volume 7
Page 32
Doors
2920 Airway Ave. Costa Mesa, Ca. 92626-2178 Phone: (714) 437-9600 Fax: (714) 437-9700
E-mail: info@umcmarine.com
Page 33
Web: http://www.umcmarine.com
Volume 7