Professional Documents
Culture Documents
www.accessfloors.net
Contents
02-03 04-05 06-07 08-09 10-11 12-13 14-15 16-17 18 19 Introduction Fortress eBand Base GIFAfloor from Knauf Pedestals Accessories and Temporary Site Protection Finishes Fire Barrier Cutting out the jargon
Base
Fortress
02
eBand
the stringent specification standards of BSEN 12825 & PSA MOB PF2 PS/SPU. The chipboard sourced for the Eurodek Base and Fortress systems has FSC Chain of Custody certification for peace of mind when it comes to products being from well managed sources.
Products
Comprehensive Choice
A wide choice of finishes is available from Eurodek, designed to complement any interior design scheme or corporate guidelines. A selection of the finishes available is shown on pages 16-17.
Applications Call centres Control rooms Office areas Data centres Education & healthcare Fire Sensitive Areas Levelling solution Public buildings Receptions & Lift Areas Retail Wet Areas Key: Highly suitable Suitable
www.accessfloors.net
03
FORTRESS
Applications
Call Centres Control Rooms Office Areas Data Centres Education and Healthcare Public Buildings Retail
The Eurodek Fortress range consists of gravity loose lay panels, encapsulated in corrosion resistant galvanised steel, with a high density chipboard core, ideally suited to a wide range of applications, where strength and long life are the primary concerns.
Mechanical stitching within the unique lid to tray locking system gives strength and integrity to the panels design. The panels have a galvanised steel bottom tray with an out turned profile. The steel lid is then rolled around the lower profile creating a locked, double layer of steel. Eurodek Fortress Lock screwdown panels are also available, providing extra security where required and greater integrity for high voids. All panels are supplied bare to accept an appropriate loose lay finish. The unique design of Fortress means that the panels achieve a variety of classifications. The Fortress panel meets BSEN 12825 Classes 5A3, 3A3 and 2A3 when used with the Eurodek HD and XD range of pedestals and PSA MOB PF2 PS/SPU medium grade. The chipboard sourced for the Fortress range of panels has FSC Chain of Custody certification.
04
Performance advantages
Tested and certified to BSEN 12825 class 5A3, 3A3 and 2A3 Tested and certified to PSA MOB PF2 PS/SPU medium grade Unique design for added strength and durability Solid feel underfoot Corrosion resistant for long life Fortress Lock version for security or additional rigidity at high voids Supplied bare to accept any loose lay floor covering
Fortress
Fortress Lock
Technical Information
PSA Size Thickness Weight Core Casing Performance Point/Working Load (25mm2) Uniformly Distributed Load Ultimate Load (in excess of) BSEN Reference Fire Rating Electrical Continuity Yes PSA MOB PF2 PS/ SPU Medium Grade 3kN 8kN/m2 5A3 600 x 600mm 31mm 10Kg BSEN Class 3 600 x 600mm 31mm Approx 9Kg High Density Chipboard Corrosion Resistant Galvanised Steel BSEN 12825:2001 Class 3A3 2.8kN 8kN 3A3 Class 0 Yes Yes BSEN 12825:2001 Class 2A3 2.5kN 6kN 2A3 BSEN Class 2 600 x 600mm 31mm Approx 9Kg
Full test data is available on request. All Fortress systems are available as Fortress Lock (Fortress 5A3 supplied as standard with full test data).
www.accessfloors.net
05
eBAND
Applications
Call Centres Control Rooms Data Centres Education and Healthcare Public Buildings Retail
The Eurodek eBand system consists of a gravity loose lay panel with a high density chipboard core, sheet steel base (and top sheet on Heavy Grade (HG) panels). The protective PVC/ABS edge band makes the panels suitable for applications which require a medium or high load bearing capacity.
Heavy Grade panels are supplied both with bonded vinyl finishes or bare to accept a wide range of loose lay floor coverings and meet BSEN 12825 class 6A3 and PSA MOB PF2 PS/ SPU Heavy Grade standards. Medium Grade panels supplied as standard with a Steel Grey factory bonded antistatic vinyl covering providing a hard wearing finish for appropriate applications. eBand Medium Grade panels achieve certification to BSEN 12825 class 4A3 and PSA MOB PF2 PS/SPU medium grade when used with Eurodek XD range of pedestals.
06
Performance advantages
Manufactured to BSEN 12825 Classifications: HG Bare: 6A3, HG Vinyl: 6A3, MG Vinyl: 4A3 Tested and certified to PSA MOB PF2 PS/SPU medium OR heavy grade Discreet yet strong edge detail for durability Solid feel underfoot Bare panels accept factory bonded carpet, laminate and other coverings where required
eBand bare
Technical Information
ED39EB Size Thickness Weight Core Casing ED40EB-5030 ED41EB-5030 600 x 600mm 600 x 600mm 600 x 600mm 39mm 40mm 41mm 13.6Kg 13Kg 13.6Kg 38mm deep, high density chipboard, class E2 two conductive springs Corrosion Resistant Galvanised Steel 0.4mm 0.4mm Top (sheet steel) 0.8mm 0.8mm 0.8mm Base (sheet steel) 0.6mm 0.6mm 0.6mm Edges (PVC/ABS) n/a Antistatic Vinyl colour - 5030 Steel Grey Floor Covering PSA MOB PF2 PS/SPU Performance PSA Heavy Grade PSA Medium Grade PSA Heavy Grade 4.5kN 3kN 4.5kN Point/Working Load (25mm2) 12kN/m2 8kN/m2 12kN/m2 Uniformly Distributed Load BSEN 12825 Performance 6 4 6 Class 4 3 4 Safety Factor All panels are deflection class A under application of working load Deflection Class Class 0 Fire Rating Yes Yes Yes Electrical Continuity
www.accessfloors.net
07
BASE
Applications
Office Areas Levelling Solution
Eurodeks Base Range is available in both light and medium duty. This gravity loose lay raised access floor system is manufactured from high density chipboard. Suitable for all commercial office and general use applications, these panels are ideal where cost is the primary concern in a project.
The Base range is available as standard 38mm deep panels with 30mm panels available on request. Panels are manufactured in accordance with EN 312-6:2003 standards. The panel is supplied bare to accept a wide range of loose lay floor coverings. Eurodeks Base range has FSC Chain of Custody certification, using chipboard from well managed sources.
08
Performance advantages
Meets the manufacturing requirements of EN 312-6 :2003 Cost competitive system High density chipboard for strength Light weight for ease of lifting Accepts a wide variety of loose lay floor coverings
Technical Information
Light Duty Size Thickness Weight Core Performance 598 x 598mm 30mm 6.8Kg 30mm deep, high density chipboard Medium Duty 598 x 598mm 38mm 8.6Kg 38mm deep, high density chipboard
www.accessfloors.net
09
G I FA F LO O R
Applications
Office Areas Education and Healthcare Fire Sensitive Areas Levelling Solution Receptions and Lift Areas Retail Wet Areas
The Knauf Integral GIFAfloor system is a partial-access floor system using natural gypsum based (calcium sulphate) tongue & groove panel installed on a conventional 600mm grid access floor under structure. Once installed, the floor is flat and smooth and joints will not track through the applied finish, and access can be incorporated with conventional access floor panels or access frames.
Manufactured from highly compressed calcium sulphate, this panel is of a homogenous monolithic material ideal for applications where acoustic properties and durability are paramount. GIFAfloor is also the ideal replacement for floor screed particularly in multi-storey projects where cost and time savings are essential. Knauf Integral GIFAfloor F181 single layer is Ideal for raised floor areas requiring continuous finishes such as sheet vinyl, rubber or linoleum. For hard finishes such as stone and ceramic, F182 double-layer or F183 triple-layer GIFAfloor provide superb stability.
10
Performance advantages
Tested and certified to BSEN 13213 1200x600mm format for quick installation and superb stability Solid feel underfoot Inert material up to F60 fire resistant Completely dry system Excellent alternative to screed Accessible void via run of conventional panels or access hatch
Technical Information
F181 Single Layer Size Thickness* Weight Core Performance Point Load (25mm )
2
1200 x 600mm & 600 x 600mm 28mm 42Kg Calcium Sulphate BSEN 13213 Class 3 n/a A1 to EN13501-1 F30/F60 resistance n/a Class 5 32mm 48Kg
Uniformly Distributed Load Fire Rating Electrical Continuity * Other thicknesses available on request
www.accessfloors.net
11
Pedestals, sometimes referred to as up-stands or legs, are an integral part of any raised access floor system. The Eurodek Raised Access Floor system incorporates a wide selection of different grade pedestals, available in a variety of heights from 26mm to achieve many finished floor levels.
Constructed from corrosion resistant steel, all Eurodek pedestals incorporate a locking nut to offer a position locking facility, and are manufactured for use with all Eurodek Raised Access Floor Systems. Eurodek pedestals can be supplied with a variety of hole centres, slotted to take stringers, or with angle heads where floor ramps are required.
MD Pedestals
Eurodeks MD pedestal range are full steel pedestals designed to meet the requirements of light to medium duty applications for Eurodek raised floor systems.
P E D E S TA L S
HD Pedestals
Eurodeks HD pedestal range comprises full steel pedestals designed to meet the requirements of medium to heavy duty applications for Eurodek raised floor systems.
XD Pedestals
Eurodeks XD pedestals comprise full steel pedestals designed to meet the requirements of medium to extra heavy duty applications for Eurodek raised floor systems, and provide an ideal solution where extra rigidity or greater floor heights are required.
12
Base Gasket
Gaskets
All Eurodek pedestals can be used with the full Eurodek gasket (or cap) range. Gasket types vary dependent on the panel & system application. Fortress T section Gasket Standard Gasket suitable for stringers Base Gasket
Stringers
Stringers are available that either clip-on or bolt-on to pedestal heads to provide enhanced lateral strength and stability. They are necessary where high finished floor heights (recommended over 600mm) are required.
www.accessfloors.net
13
Air Grilles are available where air circulation is required. Easily interchangeable with standard panels, air grilles are ideal for controlling airflow in control rooms and data centres. Made to order and can include dampers.
2
A wide range of high visibility, self levelling interior lasers, suitable for reaching the required consistent floor height, is available from your local Eurodek stockist.
10
Floor Sealer
A water based PVA floor sealer to prepare the floor surface and suppress moisture and dust.
3
Manufactured from a tough polythene film with a special low tack adhesive back, carpet protection film is ideal for protecting carpets on a temporary basis without creating a trip hazard. Dispensers are also available on request.
11
Supplied in 9Kg tubs, one part pedestal adhesive is convenient and easy to use to bond pedestals to pre-sealed concrete floors.
4
Tack Mats
2
Two Part solvent-free polyurethane adhesive is also available from Eurodek, specially designed for bonding pedestals to pre-sealed concrete floors.
5
Heavy Duty Rubber Framed Tack Mats are suitable for entrances to sensitive areas. Consisting of 30 layers of non-transferable resin on each mat, loose dirt particles are retained in the resin to keep entrances clear.
12
Twin Shield
Lifting Tools
A range of lifting tools is available for use with bare panels or panels with carpet, vinyl or laminate bonded floor coverings.
6
Twin-wall lightweight polypropylene boards suitable for protection of all types of flooring. Durable, impact resistant and water/chemical proof, TwinShield also conforms to LPS1207 Flame Retardant standards and is easily and quickly cut or creased to fit on site.
13
Moisture resistant and class O fire resistant aluminium tape for sealing the edges of cut panels and Class O fire resistant foam strip for the perimeter panels, to fill the gap between the panel and the abutment.
7
Light, durable, non-staining and biodegradable overshoes are available to provide grip and prevent slipping on many floor surfaces. Suitable up to size 14 shoes and size 12 on rigger boots. Dispenser and carry case also available.
Outlet Boxes
Outlet boxes are available to house power, data and telecom accessories where optimum flexibility is required. Other sizes are available on request.
8
Grommets
Flooring grommets are available to allow protected access to cables through the raised access floor.
14
11
12
10
13
www.accessfloors.net
15
Eurodek can supply an extensive choice of raised access floor coverings to create the desired effect or harmonise with existing interior finishes. Sample floor finishes can be requested from Eurodek stockists to ensure the raised access flooring panels match the aesthetic and practical requirements of any project.
Golden Sand
Ocean Blue
Steel Grey
Teal
Woodglade
16
Carpet
Eurodek offers a wide variety of loose lay carpet tiles in both loop and cut pile (the most popular shown here) to complement the bare finished panels. The full range of options is available on request. Loose lay tiles allow quick and easy replacement for very little expense. Loose Lay Sigma (Loop Pile) Loose Lay Generation (Cut Pile) Anti-static factory pre-bonded carpet panels can be requested on longer lead times where immediate access to the sub floor is required. PVC sit-on skirting and stair nosing can be supplied to finish the project.
Cloud
Lead
Ocean
Sky Blue
Sunlight
Barley
Dark Green
Evening Blue
Granite
Red
Slate
Other finishes
The following non-stock bonded finishes are available to order on longer lead times. High pressure laminate Wood effect panels Studded and plain rubber Checker plate metal finishes For full details of Eurodek finishes, please visit the Eurodek website at www.accessfloors.net High Pressure Laminate Wood Effect
Please note: Every effort has been made to give a true representation of the finishes shown, however Eurodek cannot guarantee 100% accuracy due to the constraints of the printing process.
Studded Rubber
www.accessfloors.net
17
FIRE BARRIER
Eurodek Under Floor Fire Barrier is a high density mineral wool and foil faced fire, smoke and acoustic barrier for raised access floor voids.
Supplied both cut to size or in slab form, the fire barrier is suitable for voids between 15mm and 1000mm and can provide up to 120 minutes fire resistance, preventing the passage of flame and smoke through the void. Eurodeks Fire Barrier also has acoustic properties to reduce flanking transmission of sound through the void by at least 9dB. Where the barrier is installed beneath a partition line into an imperforate timber based access floor system of at least 30mm thickness, with floor covering over, the room to room sound reduction on the path of the fire barrier will be at least 45dB.
Performance advantages
1. Subdivision of large uninterrupted cavities. i) To comply with Building Regulations 30 minutes integrity plus 15 minutes insulation. ii) To comply with LPC Design Guides 30 minutes integrity plus 30 minutes insulation. 2. Alignment under a partition, to maintain partition rating. i) 30 minute partition 30 minutes integrity plus 30 minutes insulation. ii) 60 minute partition 60 minutes integrity plus 60 minutes insulation. iii) 120 minute partition 120 minutes integrity plus 120 minutes insulation.
Type 1/2 hr RAF barrier 1hr RAF Barrier 2hr RAF Barrier High Void RAF Barrier
No.of Slabs per carton (slab size mm) 9 (1200 x 600) 6 (1200 x 600) 4 (1200 x 600) n/a
No.of Slabs per pallet (slab size mm) 36 (1200 x 1200) 24 (1000 x 1200) 18 (1000 x 1200) 9 (1000 x 1200)
4hr RAF Barriers are available, please contact us. N.B 75mm for voids 401 to 600mm and 100mm for voids 401 to 600mm Detailed acoustic test results and full installation instructions are available on request.
18
PSA Specification
The PSA specification is a long established performance standard used by the Property Services Agency and now referred to as MOB PF2 PS/SPU outlining grades of raised access floor, light, medium and heavy. The PSA specification outlines a method of test for structural performance. This ensures compliance and provides guidance as to the working areas where each floor grade may be used. Point Load and Uniformly Distributed Load are used here.
Panel The load bearing, horizontal component of a Raised Access Floor system
Finished Floor Height The finished floor height from the sub-floor, void height and panel thickness combined
Sub-Floor Pedestal The vertical, adjustable supporting component of a Raised Access Floor system The existing floor upon which a Raised Access Floor system is installed Void The space between the underside of a raised access floor and the existing subfloor, sometimes referred to as the cavity or plenum
www.accessfloors.net
19
Head Office Hillsborough Works Langsett Road Sheffield S6 2LW T: 0114 231 8030 F: 0114 231 8031 Find a Eurodek stockist at www.accessfloors.net