Professional Documents
Culture Documents
1W, FIXED INPUT, ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER
FEATURES Small Footprint Efficiency up to 82% SIP Package High Power Density Low Temperature Rise Up to 3KV Isolation Operating Temperature Range: -40!C ~ +85!C No External Component Required Industry Standard Pinout APPLICATIONS
The E_S-1W & F_S-1W Series are designed for application where isolated output is required from a distributed power system. These products apply to where: 1) 2) Input voltage variation " #10%; 3KVDC input and output isolation;
3) Regulated and low ripple noise is not required. Such as: digital circuits, low frequency analog circuits, and IGBT power device driving circuits.
SELECTION GUIDE
Input Voltage(VDC) Model Number Nominal (Range) 3.3 (3.0-3.6) Output Voltage (VDC) 3.3 5 #5 #9 #12 #15 5 (4.5-5.5) 3.3 5 9 12 15 24 9 (8.1-9.9) 9 15 #5 #9 #12 #15 12 (10.8-13.2) 3.3 5 9 12 15 24 Output Current (mA) Max. 303 200 #100 #56 #42 #33 303 200 111 83 67 42 111 67 #100 #56 #42 #33 303 200 111 83 67 42 Min. 31 20 #10 #6 #5 #4 30 20 12 9 7 5 11 6 #10 #6 #5 #4 30 20 12 9 7 5 Input Current (mA)(typ.) @Max. Load 415 390 281 265 250 235 271 279 266 249 260 238 145 140 106 108 104 115 112 113 107 106 104 97 16 21 100 19 24 220 20 21 100 30 21 100 30 19 220 @No Load 42 Reflected Ripple Current (mA,typ.) Max. Capacitive # Load ($F) Efficiency (%, typ.) @Max. Load 69 74 71 77 77 79 73 72 76 79 78 79 79 82 73 77 80 80 70 70 75 78 79 79 UL CE UL CE UL CE UL CE UL CE UL CE UL CE UL CE UL CE UL CE UL CE UL CE UL CE UL CE UL CE UL CE Approval
F0303S-1W F0305S-1W E0505S-1W E0509S-1W E0512S-1W E0515S-1W F0503S-1W F0505S-1W F0509S-1W F0512S-1W F0515S-1W F0524S-1W F0909S-1W F0915S-1W E1205S-1W E1209S-1W E1212S-1W E1215S-1W F1203S-1W F1205S-1W F1209S-1W F1212S-1W F1215S-1W F1224S-1W
17
100
The copyright and authority for the interpretation of the products are reserved by MORNSUN
E_S-1W&F_S-1W
B/1-2012
Page 1 of 5
Model Number E1515S-1W F1505S-1W F1509S-1W F1515S-1W E2405S-1W E2409S-1W E2412S-1W E2415S-1W F2403S-1W F2405S-1W F2409S-1W F2412S-1W F2415S-1W F2424S-1W
Output Current (mA) Max. #33 200 111 67 #100 #56 #42 #33 303 200 111 83 67 42 Min. #4 20 12 7 #10 #6 #5 #4 31 20 12 9 7 5
Approval
15 (13.5-16.5)
5 9 15 #5 #9 #12 #15
22
100
73 75 73 UL CE UL CE UL CE UL CE
42
220
77 80 80 70 71
24 (21.6-26.4)
3.3 5 9 12 15 24
UL CE UL CE UL CE UL CE
47
100
76 78 80 77
Note:1.Models listed with strike-through text have been officially discontinued. # 2. For each output.
INPUT SPECIFICATIONS
Item Test Conditions 3.3VDC input 5VDC input Input Surge Voltage (1 sec. max.) 9VDC input 12VDC input 15VDC input 24VDC input Input Filter Min. -0.7 -0.7 -0.7 -0.7 -0.7 -0.7 Typ. ------Max. 5 9 15 18 21 30 VDC Unit
Capacitance Filter
OUTPUT SPECIFICATIONS
Item Output Power Output Voltage Accuracy Output Voltage Balance Line Regulation Dual Output, Balanced Loads For Vin change of #1% 3.3VDC output Others 3.3VDC output 5VDC output 9VDC output Load Regulation 10% to 100% load 12VDC output 15VDC output 24VDC output Temperature Drift 100% load ExxxxS-1W Ripple & Noise* 20MHz Bandwidth Exx15S-1W FxxxxS-1W Fxx24S-1W Short Circuit Protection** ---------------Test Conditions Min. 0.1 Typ. -#0.5 --12 10 8.3 6.8 6.3 6 -50 100 75 100 -Max. 1 #1 #1.5 #1.2 20 15 15 15 15 15 #0.03 75 150 100 150 1 s mVp-p %/!C % Unit W
Note:1.*Test ripple and noise by %parallel cable& method. See detailed operation instructions at Testing of Power Converter section, application notes. 2.**Supply voltage must be discontinued at the end of short circuit duration.
The copyright and authority for the interpretation of the products are reserved by MORNSUN
E_S-1W&F_S-1W
B/1-2012
Page 2 of 5
COMMON SPECIFICATIONS
Item Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency MTBF Case Material Weight -Test Conditions Tested for 1 minute and leakage current less than 1 mA Test at 500VDC Input/Output,100KHz/1V Full load, nominal input MIL-HDBK-217F@25 F2424S-1W Others Min. 3000 1000 ---3500 Typ. --100 30 100 -Max. ------KHz K hours Unit VDC M' pF
Plastic(UL94-V0) 2.1 -g
ENVIRONMENTAL SPECIFICATIONS
Item Storage Humidity Operating Temperature Storage Temperature Temp. rise at full load Lead Temperature Cooling 1.5mm from case for 10 seconds Test Conditions Non condensing Power derating (above 85 ) Min. --40 -55 --Typ. ---25 -Max. 95 85 125 -300 !C Unit %
EMC SPECIFICATIONS
EMI EMS CE ESD ExxxxS-1W FxxxxS-1W CISPR22/EN55022 IEC/EN61000-4-2 IEC/EN61000-4-2 CLASS A (External Circuit Refer to Figure1) Contact Contact !6KV !8KV perf. Criteria B perf. Criteria B
F_S-1W Series
Recommended external circuit param eters: Vin"3.3V/9V C1"2.2$F /50V 1210 Vin"5V/12V/24V C1"1$F /50V 1210 Note: Product bare input of 3.3V 5V 12V 15V already meet CLASS A, increase the capacitor margin increase.
Temperature Derating Curve
Output Power Percent(%) 120 100 80 60 Safe Operating Area 40 20 0 -40 0 40 85 105 120 Ambi ent Temp.( )
C1 G ND
EU T
GND -Vo (0V)
L O AD
Recommended external circuit param eters: Vin"24V C1"2.2$F/50V 1210 Note: Product bare input of 5V 12V 15V already meet CLASS A.
(Figure 1)
Typ ic
al L o a d
L in e
50
70
100
Efficiency(%)
Input Voltage(V) The copyright and authority for the interpretation of the products are reserved by MORNSUN
Efficiency(%)
Efficiency(%)
Input Voltage(V)
Efficiency(%)
10.10 [0.398]
(Fron t View)
4.10[0.161]
0.50[0.020]
SINGLE OUTPUT
19.60[0.772]
(Bo tto m Vie w) 2 5 6 7
TUBE OUTLINE DIMENSIONS 6.00[0.236] 0.90[0.035] 2.54[0.100] 15.24[0.600] 0.30 [0.012] 9.60 [0.378]
12.40 [0.488]
E_S-1W&F_S-1W B/1-2012
FOOTPRINT DETAILS Pin 1 2 5 6 7 Single Vin GND 0V No Pin +Vo D ual Vin GN D -Vo 0V +Vo
Note: Unit:mm[inch] Pin section tolerances: # 0.10mm[ # 0.004i nch] General tol erances: # 0.50mm[ # 0.020inch]
Note: 4.90 [0.193] Unit :mm[inch] General tolerances: #0.50mm[#0.020inch] L=530mm[20.866inch] Devices per tube quantity : 25pcs L=220mm[8.661inch] Devices per tube quantity: 10pcs Short tube inner packaging dimensions: L*W*H=255*170*80mm; Short tube outer packaging dimensions(with six inner packaging boxes): L*W*H=375*280*270mm; Long tube inner packaging dimensions: L*W*H=580*200*100mm; Long tube outer packaging dimensions(with two inner packaging boxes) " L*W*H=600*215*220mm; Long tube outer packaging dimensions(with three inner packaging boxes) " L*W*H=600*215*325mm.
TEST CONFIGURATIONS
Input Reflected-Ripple Current Test Setup Input reflected-ripple current is measured with an inductor Lin and Capacitor Cin to simulate source impedance.
Oscilloscope Lin Cin
Current Probe
DC DC
Load
Lin(4.7$ H)
The copyright and authority for the interpretation of the products are reserved by MORNSUN
16.90 [0.665]
+Vo
Cout
DC DC
Cout
0V -Vo +Vo
DC DC
(Figure 2)
Cout
GND
0V
Note: For each output. It (s not recommended to connect any external capacitor in the application field with less than 0.5 watt output.
4) Output voltage regulation and over-voltage protection circuit The simplest device for output voltage regulation, over-voltage and over-current protection is a linear regulator and an capacitor filtering network with overheat protection that is connected to the input or output end in series (Figure 3), the recommended capacitance of its filter capacitor sees (Table 1), linear regulator based on the actual voltage and current to reasonable selection.
D ua l Ou tp ut Vin GND Sin g le Outp u t Vin GND
REG REG REG REG
+Vo 0V
DC DC
REG
-Vo +Vo
DC DC
0V
(Figure 3) 5) Cannot use in parallel and hot swap Note: 1. Operation under minimum load will not damage the converter; However, they may not meet all specification listed. 2. Max. Capacitive Load tested at input voltage range and full load. 3. All date in the datasheet are measured according to nominal input voltage, rated output load, TA=25 4. In this datasheet, all the test methods of indications are based on our corporate standards. 5. The performance in the datasheet is just fit for the part number in the selection guide, and may be different from the customer-designed product, you can get more details from MORNSUN FAE. 6. Contact us for your specific requirem ent. 7. Specifications subject to change without prior notice. , humidity<75%, unless otherwise specified.
The copyright and authority for the interpretation of the products are reserved by MORNSUN
E_S-1W&F_S-1W
B/1-2012
Page 5 of 5