Excercise No. 3: Analysis and design of a simple concrete frame
Date : Roll No. : Marks : Name : Facultys Signature : Computer Id. :
Aim To create model of a reinforced concrete frame structure using STAAD.Pro, assign all required input and perform the analysis and concrete design. Problem Description Analyse and design the RC frame given in Figure 3.1 using STAAD. Pro.
Figure 3.1. Model of the RC frame Attribute Data Member properties Beams 2 and 5: Rectangular (PRIS), 275 mm width 350 mm depth Columns 1 and 4: Rectangular (PRIS), 275 mm width 300 mm depth Column 3: Circular, 350 mm diameter Material Constants Modulus of Elasticity: 22 kN/m 2
Density: 25 kN/m 3 Poisson's Ratio: 0.17 Supports Base of all columns: Fixed Loads Load case 1: Dead Load (DL) Self weight of the structure. Beams 2 & 5: 400 kg/m in global Y downward Load case 2: Live Load (LL) Beams 2 & 5: 600 kg/m in global Y downward Load case 3: Wind Load (WL) Beam 1: 300 kg/m along positive global X 1 2 m 2 1 3 5 5 2 4 3 6 5 Y X Z 2
SAD Lab Workbook
Beam 4: 500 kg/m along positive global X Load Case 4: DEAD + LIVE 1.2DL + 1.5LL (Use REPEAT LOAD, not Load Combination) Load Case 5: DEAD + WIND 1.1DL + 1.3WL (Use REPEAT LOAD, not Load Combination) Analysis Type Linear Elastic Concrete Design Consider load cases 4 and 5 only.
Parameters: Ultimate Strength of Steel: 415 N/sq.mm Concrete Grade: M20
Clear cover for Beam: Clear cover for top: 25mm Clear cover for bottom: 25mm Clear cover for side: 25mm
Clear cover for Column: Clear cover for top: 40mm Clear cover for bottom: 40mm Clear cover for side: 40mm
Design beams 2 and 5 Design columns 1, 3 and 4
Analysis Results Support Reactions Joint Load Case Fx Fy Fz Mx My Mz 1
4
5
Joint Displacements Joint Load Case Horizontal X (mm) Vertical Y (mm) Horizontal Z (mm) Rotational X Y Z 2 DL LL WL DL + LL DL + WL 3 DL LL WL DL + LL DL + WL 5 DL 3