Professional Documents
Culture Documents
Application Examples
Home appliances OA equipments Vending machines
G 5 L E
Ordering Information
Terminal Shape Flux protection Fully sealed Minimun Rated coil Rated coil packing unit Model Model Classification Contact form voltage voltage 5 VDC 5 VDC 12 VDC G5LE-14 12 VDC SPDT (1c) G5LE-1 24 VDC 24 VDC 100 pcs/ Standard tray 5 VDC 5 VDC SPST-NO (1a) G5LE-1A 12 VDC G5LE-1A4 12 VDC 24 VDC 24 VDC Enclosure rating
Characteristics
Contact resistance *1 Operate time Release time Insulation resistance *2 Between coil and contacts Dielectric Between strength contacts of the same polarity Impulse between withstand coil and voltage contacts Destruction 100 m max. 10 ms max. 5 ms max. 100 M min. 2,000 VAC, 50/60 Hz for 1 min 750 VAC, 50/60 Hz for 1 min
PCB terminals
Note. When ordering, add the rated coil voltage to the model number. Example: G5LE-1 5 VDC Rated coil voltage
Ratings
Coil
Rated voltage 5 VDC 12 VDC 24 VDC Rated current (mA) 79.4 33.3 16.7 Coil resistance ( ) 63 360 1,440 Must operate Must release Max. voltage voltage voltage (V) (V) (V) % of rated voltage 75% max. 10% min. 170% at 23C Power consumption (mW) Approx. 400
4,500 V (1.250 s) 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) 1,000 m/s2 100 m/s2 10,000,000 operations min. (at 18,000 operations/hr) 100,000 operations min. (at 1,800 operations/hr) 100 mA at 5 VDC -25C to 85C (with no icing or condensation) 35% to 85% Approx. 12 g
Vibration resistance Malfunction Shock resistance Durability Electrical Failure rate (P level) (reference value) *3 Ambient operating temperature Destruction Malfunction Mechanical
Note 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. The operating characteristics are measured at a coil temperature of 23C. 3. The Max. voltage is the maximum voltage that can be applied to the relay coil.
Contacts
Item Load Contact type Contact material Rated load Rated carry current Max. switching voltage Max. switching current Inductive lead (cos = 0.4) Single Ag-alloy (Cd free) 10 A at 120 VAC; 8 A at 30 VDC 5 A at 120 VAC; 4 A at 30 VDC 10 A 250 VAC, 125 VDC (30 VDC when UL/CSA standard is applied) 10 A 5A Resistive load
Note. The data given above are initial values *1. Measurement conditions: 5 VDC, 1 A, voltage drop method. *2. Measurement conditions: The insulation resistance was measured with a 500 VDC megohmmeter at the same locations as the dielectric strength was measured. *3. This value was measured at a switching frequency of 120 operations/min.
G5LE
Engineering Data
Maximum Switching Capacity
Switching current (A)
50 30 AC resistive load 10 7 5 3 AC inductive (cos 0.4)
Durability
Durability (x104 operations)
180
100 70 50 30
160
120
100
10
30
50
100
0 25
20
30
40
50
60
70
80
90 100
Note. The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage.
Shock Malfunction
NO contact NC contact Y 1,000
G 5 L E
1,000 X
500
1,000 Z
Y X
Shock direction
Number of Relays:5 pcs Test Conditions: Shock was applied 3 times in each direction with and without excitation and the level at which the shock caused malfunction was measured. Rating: 100 m/s2
Dimensions
G5LE-1 G5LE-1A
(21.6)* 22.5 max. (15.6)* 16.5 max.
SPDT (1c)
(18.56)* 19.0 max. 0.5
0.2 dia. holes Five,1.3+0
SPDT (1c)
(2.25) 12 1
(2.25)
G5LE-14 G5LE-1A4
(21.6)* 22.5 max. (15.6)* 16.5 max.
SPST-NO (1a)
0.2 Four,1.3+0 dia. holes
SPST-NO (1a)
(2.25)
(18.5)* 19.0 max. 0.5 3.5 0.2 1 1.2 *Average value 0.4
2 1 5
12
(2.25)
G5LE
Approved Standards
UL Recognized:
Model Contact form
G5LE
6,000
CSA Certified:
Model Contact form
G5LE
3 to 48 VDC
6,000
TV EN/IEC Certified:
Model Contact form Coil ratings
G5LE
5, 12, 24 VDC
G 5 L E
Precautions
Please refer to PCB Relays Common Precautions for correct use.
G5LE
G 5 L E
Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms.
OMRON Corporation
Electronic and Mechanical Components Company
Contact: www.omron.com/ecb